91 Cummins D250 12v 5speed NV4500

[@brock6286]

love how this old truck could out run most of the modern ones!

[@Carla-tz7qw]

Because of smog bullshit.

[@rock-uu7qr]

Probably not lol this truck makes 160 hp stock it ain’t coming close to an l5p with the ten speed Allison

[@daltonroberts7940]

@@rock-uu7qr you do know this truck is clearly not stock right

[@chrishansen7004]

@@daltonroberts7940 an old 12V is not coming anywhere near close too what an L5p with a 10 speed does unless you wanna dump 20 grand in mods 🤷‍♂ i know hes not stock but still its not gonna hold a candle too it

[@LucasJantzi]

@@rock-uu7qrbuddy reached 180 in third gear your l5p is heavier then your mom the torque on this guys 12 valve would blow your doors tf off

[@markb1911]

I’ve done a couple of 90’s Honda builds. Never have messed with diesel engines, but I’ve driven a few, & let me say that’s some quality shifting, and quick too. Nice build, the things you’ve done so far look very clean.

[@unknownnumber1264]

That truck is the pinnacle of raw fun bro!! Love hearing it thru headphones

[@dhillanroy6659]

Finally someone that drives like I do! Badass truck, in the process of manual swapping mine, stoked to actually put the power down instead of just spinning that snowmobile clutch slush box 46RH LOL

[@JasonY02]

If your trucks a Cummins it's a 47RH anly gas engines use the 46RH/RE. What you got truck engine wise ?

[@esimler]

@@JasonY02 it’s actually either a 727 if it was non intercooled or an A518 which is a beefy 46RH

[@JasonY02]

@@esimler true I was thanking 2nd gen for some reason

[@wesscarey4475]

Thank you for stating the FACTS. Some people don't like the TRUTH. These transmissions leave a LOT to be desired. A strong manual is the way to go!

[@moparproud3978]

@@wesscarey4475 Stock they do. Built? Not much better. Only downside is towing heavier, there just aren’t enough gear splits to be in a happy place. A built auto is tough to beat

[@DMACHOLMAN]

By far it looks to have the cleanest interior I've see to date on a truck. I can't see the floor but if you've gone through the trouble of Reupholstering the headliner and door panels it's got to nice inside.

[@jamesappel1928]

Thanks, Yes I've done lots of work to the interior. Carpet is new as well.

[@lancow1234]

@@jamesappel1928 hey sick build. What brand is the he351cw and and what axle gears do you have?

[@tristanoliva]

Wow that stainless work in the engine bay is amazing

[@jamesappel1928]

Thank you! Lots of time and hard work.

[@kx250braap]

@@jamesappel1928 a man who takes pride in their work

[@Ndw1995]

Man, this truck is really nice, and the perspective is perfect, please make more like this!!

[@elia2649]

Clean in the only places it matters: The engine bay and the interior. Beautiful!

[@IKhanNot]

Great truck and proper driving. You'd do great driving an old 2 stroke Detroit Diesel powered truck.

[@keeganfoster1792]

You know its fast when it looks fast on camera beautiful truck man!

[@BrandonJohnson-by2pk]

such loyal trucks. that thing was started before you even touched the key😂

[@wesscarey4475]

I agree, turbo and intercooler piping very cool! May be good to ad some reinforcement at the heater grid joint? Looks really good! TIG not that easy to do............

[@mr_howitzer7]

12 valves sound awsome

[@anthonybrewer45]

Such a nice, classic truck which besides showing it age a little, has been taken good care of. Sweet ride!

[@viuus]

I can listen to the sound all day! Happy Smooth shifting!

[@christravels360]

That truck sounds amazing! I love the sound of an older Cummins, and that turbo..... Just so nice. I also like how you run through the gears. Thanks for sharing!

[@enew252__]

The welds on the intercooler piping. Thing of beauty.

[@SiriusXI]

This is the greatest video KZbin has ever recommended to me

[@George88889]

These videos are priceless in a world where emissions and the push for zero emissions are becoming a real world thing.

[@danielross552]

That old motor still got it man I love old vehicles I want a first gen

[@MatthewDoughten]

I diesel swapped my FSJ, om606 in front of an GM NV4500, s200 turbo, mechanical pump. Amazing how good these diesel trucks can sound! I drive it daily and push it hard. While I might not have the torque this monster does, mine will wind out nearly twice as far.

[@jamesappel1928]

Om606's are awesome! It's definitely on the list of future builds. I almost bought one a few weeks back.

[@DieselDethan]

Did you do the door panels and head liner yourself looks great.

[@jamesappel1928]

Yes I did

[@Chris-km8wy]

@@jamesappel1928 What material are they and how did you do those?

[@jamesappel1928]

@@Chris-km8wy it's just some fake leather/ vinyl I bought on Amazon. Headliner is just glued on and the door panels I removed and recovered the panel and stapled on the back side.

[@rcmc1256]

@@jamesappel1928 wow It really looks clean

[@richardmesser276]

Link to the Amazon product?

[@lilufoo]

I came across this cummins video randomly and did not expect to see 7th Ave lol

[@idahotrucker7017]

Straightest driving Dodge pickup ever. Awesome!

[@dodgeguy9632]

Bro you got the dealership gauges , manual and a 12 valve. That’s is a awesome truck bro

[@AnangryLibertarian]

I hope you never redo the body. Such a cool idea. Super clean 12v super clean inside. Inconspicuous on the outside. Something about that patina that looks so nice. Maybe because it has to be earned. Nice truck!!!

[@claytontinkle4423]

Bro I was looking at all of this and I was like wow that all looks really familiar. Like I've been on that road plenty of times. Then I realized that that's freaking 7th

[@gillpecceuservices]

Nice. I have an 89 W250 and I installed an NV4500 and removed the 727 auto. So much better now. Aloha

[@offgridmangogrower]

Curious how you sealed the back half? Mine leaks …should have cut an o ring or come up with a seal on tranny output shaft

[@BB-fv2dw]

That looks like a very fun truck

[@jamesappel1928]

It certainly is and I just did a bunch of upgrades that about doubled the power since this video.

[@snyderkurtis]

@@jamesappel1928 can we get the updated video

[@jamesappel1928]

@@snyderkurtis it's going to have to wait until spring. Lots of snow and salt here in Minnesota right now. I will also get it on the dyno in the spring.

[@codykennedy19]

Absolutely brilliant video man love those hard accelerations can you please do another one like this one only a lot longer because I love that sound stay safe man thanks

[@jamesappel1928]

Yes there will be more videos coming in the spring.

[@jagg5474]

@@jamesappel1928can you post some more vids of this truck

[@rhecyeeyeejake7184]

Gawlee this is a southern boys dream truck. I want one that fast in that good of shape

[@deborahchesser7375]

Damn that’s a good running old truck I’d love to find one ✌️🇺🇸

[@OvensGarage]

You must be hard on the parts..! ;) Just THRASHIN! Sounds good man.

[@ShooterAK]

got that pride stare down at 0:57 then almost getting into a wreck (almost)

[@gabrieldunbar9982]

I saw that too lol

[@Prowbar]

Still waiting for the updated test drive!

[@toddbauer2013]

I love the whistle on your truck man it’s so sweet

[@spawnofsteve]

Nice truck. I recognized Anoka immediately lol

[@zgt5002]

Im used to the clunky zf6 in my f250, that nv4500 looks smooth as butter

[@jamesappel1928]

It's not as smooth at it looks but it does have a fresh rebuild.

[@316fabrication]

Wow amazing welds!!!!!!!!!

[@Bill-q4k]

Love the video truck looks and sounds great but when you rev it, it is best practice to not turn the truck off immediately, you want to let the turbo spool down, don’t want to starve the turbo

[@gabbienyajifiqq1316]

She moves and grunts nicely

[@NukeCult666]

👍 love it. Hate the truck market in the here and now.

[@alexmartynov2953]

Wow! That was great! Thank You for the ride!

[@offgridmangogrower]

Like everything about your truck Any front end mods for death wobble….steering gear mods? She handles nicely….!

[@jamesappel1928]

All the front end components are new and its a 2wd so it drives pretty well. Steering gear is original though.

[@twinturbo9051]

1:53 I feel butterflies on mi stomach

[@Wade_L]

anyone else notice the speedometer max out?😂🤙

[@brucerazor5202]

👍 I have a 99 with 185,000 and no leaks at all, Enjoy my daily drives

[@demetriuspalmer2992]

Man I love the 1st and 2nd Gen Dodge diesel pickup trucks being a Ford OBS guy. I so wanna get my hands on a 2nd Gen ext cab Long bed 5 or 6 speed manual or build one

[@willw7545]

you've convinced me. I think its time to buy a first gen lol.

[@kyleperry1701]

Well did you buy one??

[@Carla-tz7qw]

The engine that saved dodge.

[@taps_1021]

Would like to see another vid on the truck.. are those black raceline rockcrusher?

[@moparproud3978]

The ol’ girl looks to run very well! Love it

[@1g4u]

Do you still have this truck? 👍

[@matticus6339]

Very nice 1st gen. Love it.

[@drd1924]

Nice truck man...I like the diamond interior

[@nghtrdr84]

That’s how you drive a Cummins 💪👊

[@nategreenfield1349]

Badass truck sounds great! I'm jealous of the steering haha seems like I'm always fighting mine.

[@ryanm4738]

No shit, I thought this truck looked familiar, met you at the coon rapids cruise

[@jamesappel1928]

Yeah you probably did.

[@outdoorlife7146]

I’m a ford guy and I got 2 obs 7.3 personally I hate dodge but that truck is nice and fast

[@jamesappel1928]

Thanks man. It's a heap ton faster right now than it was in this video. A new video will be up in the spring.

[@TrumpAlwaysWins.]

@@jamesappel1928upload bro it’s been 2 years

[@christopherstidams3369]

This thing sounds fricken good ole boy shit I own obs 7.3 but all boys here in Kentucky ya hear em getting on it in there 12 valves just like this lol I do in my powerstroke but shit can’t beat 12 valve ole son

[@jamesappel1928]

You betcha!

[@danw6014]

This is the truck to have to survive the zombie apocalypse or the EPA apocalypse, which ever is first.

[@brettrobinson1430]

Amazing truck dude. What fuse box is that? Love how clean it looks you’d have to know these trucks to see all you have done it’s so subtle and clean.

[@jamesappel1928]

The fuse box is from a 99 jeep cherokee. You think it looks clean now, just wait for the next video in the spring. It's on a whole new level.

[@brettrobinson1430]

@@jamesappel1928 can’t wait. Any other socials you use so I can follow?

[@jamesappel1928]

@@brettrobinson1430 only instagram which I see you found already.

[@CodyGaniel]

And door panels???

[@Hazinclayton_007]

That Patina is Awesome!!

[@Asteroid--07]

How fast it actually goes bruh?

[@agray_lowboost]

Ol truck sounds stout as hell. Sweet video and badass truck💪

[@chapmanmerchant]

Example on what trq is. My friend and i own subaru sti s Mine makes 440 at the wheels WHP His 370. My trq numbers ar 379 a wheels His is 420. smaller turbo. I cant beat him if i tried. Goes for gas a diesel. cheers love the truck man

[@chapmanmerchant]

Am i wrong or has he thought this gearing correct for what he wants out of the truck?

[@stevenportice7981]

I have a question, I have one of these trucks, but it has the 5spd in 2 wheel drive, do you know if I can just change out the tail shaft to make it accept a transfer case?

[@jamesappel1928]

Need to swap the tail housing and output shaft.

[@ramensoup6968]

i wanna buy this off you like omg i fckin love this ole 12v

[@Luxphora]

Where did you get the diamond leather for the headliner and doors?

[@williamhsteele]

Awesomeness! She sounds great.

[@justinhaney6327]

What all have you done to the engine ??? That truck runs strong

[@ag6371]

That 5.9 sounds like a Blue Bird TC/2000

[@_lowsun_]

Yeah... I definitely need to nv4500 swap mine now, what turbo you running?

[@TheDieselDangler]

Did u leave the clamp off the compressor so u can pull it off and stop a run away just in case?

[@tannerpeck5668]

What head liner and door panels are they I want them

[@asherasher1111]

You must have the 3.07 gears!?!? 😊 i have that rig with 4.10s

[@jamesappel1928]

Stock 3.54. Yeah 4.10 is no fun.

[@alouisschafer7212]

Great setup you got there. Seems a lil too smokey for my taste... does she roal coal when driving along? How much HP?

[@jamesd2714]

Badass truck my dude! Gotta get me one. What wheels are those?

[@joshniell]

Where did you the the Stiched door panels?

[@jamesappel1928]

I made them myself.

[@joshniell]

@@jamesappel1928 nice. I like the stitch work.

[@djpainter753]

Nice build man!

[@Walker66666]

nice paint job the mug make it look good

[@genis8530]

I put a 4 inch mbrp turbo back on mine and she crackles when I honk on it, might be the he 351 barking back but gets me hard as a rock.

[@joeb7168]

That’s mint nice truck bro

[@dbfabworks5320]

Hell yea brother! that thing runs good! What EGT and boost you see at the top of those pulls? I want to HE351 swap my first gen soon..

[@jamesappel1928]

This he351 is far from stock but it never gets over 1200 degrees no matter what. I've only got it set at 25psi right now.

[@a-dog8075]

What's done to it? Love the sound

[@lancow1234]

I’m about to order a eBay he351cw is that a Chinese turbo? How is it holding up?

[@jamesappel1928]

@@lancow1234 no this turbo is from turbo labs of America. Wasn't cheap.

[@lancow1234]

@@jamesappel1928 sweet is it the upgraded turbine and compressor? Or just 1 or the other.

[@gi0zzy22]

Does your truck have cruise control.

[@constanciobautista498]

Beautiful truck👍

[@Trikekid84]

What fuel mileage do you get? Going to look at a 2wd with the same setup.

[@tony4metallicaify]

Thing sounds and runs good!

[@fenwickc2274]

what does a truck like this cost ?

[@jorymosshart9257]

What is the wheel and tire package on that truck and what front suspension mods did you have to do?

[@redrebelneck8678]

What did you do to get it to run that quick

[@CodyGaniel]

Headliner????

[@gregoriotoledo2700]

Hello, the truck is for sale.?

[@AlexB-cn2lo]

That headliner looks dope, is that how it looked stock?

[@jamesappel1928]

No I made it.

[@AlexB-cn2lo]

@@jamesappel1928 that's pretty cool man!

[@dodgedrivinredneckky3996]

Great video liked and subscribed

[@christopherstidams3369]

Damn it boy she runs good an that I interior you said got the stuff from Amazon did it your self ? I like it man

[@jamesappel1928]

Yes that is correct. Thanks I appreciate it.

[@mattcurtis4088]

What size injectors and turbo you got

[@AnotherMotorist]

Sweet, what clutch and flywheel/weight ?

[@jamesappel1928]

It's a luk Cerametallic clutch, flywheel came with it, not sure on the weight.

[@AnotherMotorist]

@@jamesappel1928 nice, would you say it's close to being a OEM set up?

[@jamesappel1928]

@@AnotherMotorist yes I would say so.