91 OBS Chevy Loose Steering Wheel

[@ForceBuilt]

Product links: Pivot Pin Puller: amzn.to/3COhK9v Steering wheel Press: amzn.to/3JllDp4 I am a member of Amazon associates. Clicking the links help me and cost you nothing..

[@travisreynolds1726]

Appreciate the tear down sequence and tool list/links. Just finished mine on an ‘89. I feel like I have 3K of those 10.8K views 😅. Tip to anyone else looking to do this - be careful with the column pin pullers. Can strip or snap off if not careful. Not fun if you run into that. Also - dimmer switch connection plate (plastic plate that engages the dimmer rod) can be problematic to fit back together. Take notes/pictures when you remove. One of the best videos out there for this.

[@ForceBuilt]

Thanks Travis! Glad you got it finished!

[@sharifbenyisrael6493]

Mannnnnnnnnn you ain't tell one lie in this message I'm probably responsible for 300 views in the last week 😅😅😅😅 that metal pin on the side is killing me!! And I went through 2 pivot pin pullers...😢 I'm putting it back together now. Pray for me.

[@williamserrahn9702]

Thanks for the video and the encouragement. I finished mine today and everything worked and I had no parts left over. Gave me some confidence. Now I might put the motor back together on my 1976 CB750 Honda which has been apart for 7 years.

[@ForceBuilt]

Great news that you were successful! Congrats! 1976 Honda, now that is cool. Good luck!

[@oldbiker9739]

I had to do that to my 91 as well a little bit of work and its all worth it those trucks are work horses , We beat the crap out of those truck here in the Alberta oil & gas fields back then when I was a gas plant operator using them to check and repair well heads , those were the days my friend .good job , your son is all eyes and learning you taught him well .

[@ForceBuilt]

Yeah, I love these trucks. Very solid machines. Thanks for checking out my videos!

[@jimmyecroyd5237]

Thank you so much, had to fix my high beams, the rod came out of the groove, couldn’t have fixed it without this video

[@ForceBuilt]

Glad to help! Thanks for watching

[@joelquaintance9025]

Can I do it? Not in this life! You made it look easy. Good job; great video. I wish that I could pay you.

[@mattlong4896]

Thanks for the video! That helped me avoid a frustrating afternoon. I'm going to gather the tools first and order a new ignition cylinder, and plan ahead for a day when I have time to knock it all out.

[@ForceBuilt]

Good deal Matt! Glad you found the video helpful. Thanks for commenting! Post back when the job is done, I would love to hear about it!

[@fahaka2003]

Thanks for this upload, just got my 91 suburban done today. That pivot pin puller worked on the first pin fine, but the nut stripped out on the second one. Thankfully I had enough hardware to replace that nut and bolt.

[@ForceBuilt]

Glad you figured out how to fix the tool and got it done! Thanks for watching!

[@ErlindaPacheco-y8r]

Did you use the lisle one or the other brands the have

[@fahaka2003]

@@ErlindaPacheco-y8r Manufacturer: Lisle Manufacturer Part No.: 19940 Our Part No.: LIS19940 Thats the one I ordered.

[@bowtie-man]

Many thanks for making and posting this video. The insight of what to expect is priceless and will be a tremendous help on my repair. Thanks again, brother. God bless you and yours.🤙🤙👍👍👊👊✌️✌️

[@ForceBuilt]

Anytime Bowtie-Man! Glad you liked it. Thanks for watching!

[@bowtie-man]

@@ForceBuilt Thanks for sharing your knowledge. 🫡🫡✌️✌️

[@sHiFtY-5-oh]

Great video i just had to do this to my 91 that i bought a few weeks ago and it is a pita lol definitely agrivating. keep up the great vids love the channel oh and you definitely helped me switch out my gauges to the needle style thanks a bunch!👍💪

[@ForceBuilt]

Thanks sHIFTY! Glad you stopped by to watch!!

[@williamserrahn9702]

Maybe it's just time to sell the truck with disclosure to the new buyer. Nice video, thanks for the links for special tools.

[@ForceBuilt]

I think you can handle it. Just take your time. Thanks for watching!

[@mccanavizsandoval9302]

Hey boss thank you so much your video help me a lot I got my steering wheel ready thanks for your video ❤

[@ForceBuilt]

That's great! Glad you found my video useful!

[@naslizzy9354]

Welp from the comments its lookin tough to do but I’m going to attempt it now. All my tools just arrived.. wish me luck

[@ForceBuilt]

Good luck! Take pictures as you go. It helps.

[@naslizzy9354]

I have a manual so it’s a lil different looking inside plus mines a 92 but this video still helps a lot! It’s got every step! Thank you sir!

[@ForceBuilt]

@@naslizzy9354 Glad to help! Thanks for commenting!!!

[@googleusertryingtoquit2217]

For everyone that thinks this is too hard to do themselves I would like to say that if you take your time it's really not that bad. It is a bit tedious and sometimes you need a 3rd hand to put some of it back together but it's honestly doable for pretty much anyone. Probably the. Worst part for me was the pivot pins. On the 2nd one it broke the screw off inside the pin requiring me to drill and re tap the pin more than a couple times to finally get the screw out re tapping the pin is not easy as it's made of something like hardened steel or possibly unobtanium lol. Take pictures at every step because you will forget the orientation of some of the pieces and the exact order they go back together. May everything out somewhere safe so you don't lose any small parts and Take your time. You will save some money. Seeing as a mechanic will charge you around $100/hour...yeah screw that . when finished you can hold your head high in triumph and feel as though you may actually be begining to deserve being called a man. Or if you've got plenty of cash laying around take it to a shop hope everything on 8t works when you get it back IF I can do it, chances are you can do it.

[@mrrc6083]

Thanks very helpful video for my 89 Chevy suburban

[@ForceBuilt]

Thanks and thanks for watching!

[@صدامرفيش-ر8ح]

Gracias, hombre. Me beneficié de tu lección. Diré lo mismo sobre este trabajo en mi auto.

[@ForceBuilt]

¡Gracias! Me alegra que lo hayas encontrado útil. ¡Gracias por mirar!

[@صدامرفيش-ر8ح]

@@ForceBuilt Gracias mi querido amigo ¿Tiene una explicación sobre la palanca indicadora hacia la derecha e izquierda y la palanca que cambia de luz de carretera a luz de cruce?

[@ForceBuilt]

@@صدامرفيش-ر8ح Empuje la palanca hacia arriba para girar a la derecha y jálela hacia abajo para girar a la izquierda. Tire de la palanca hacia usted hasta que haga clic para entrar y salir de las luces altas y bajas. No estoy seguro si esto es lo que estabas preguntando. ¡Espero que esto ayude!

[@stevenjames7073]

U did a fine job brother

[@ForceBuilt]

Thanks!

[@zerolatitude2923]

Well shiver me timbers, I was not looking forward to this, so I think I will just go have my wisdom teeth pulled first!

[@ForceBuilt]

You can do it!

[@FlagellarBard0]

Wow, this ended up being a lot more complicated than it looked like it would be lol

[@ForceBuilt]

I know, right!

[@wranglerellis9214]

Fr that's what I gotta do now😂😂

[@Godfirst9845]

Amazing job!

[@ForceBuilt]

Thanks! Love your KZbin name.

[@edwinlagos92]

I have question does the car turn on if you dont put everything together, or i have to put everything back and will start right on

[@ForceBuilt]

Not sure but I don't think so. I could be wrong. It has been a long while since I made this video. Thanks for watching!

[@edwinlagos92]

@@ForceBuilt thank you 😊 🙏

[@magicmagic738]

You is the best

[@ForceBuilt]

Thanks!

[@michaelstout8152]

Hey the part with the spring inside with the sqare hole you used a screwdriver to take out any other suggestions on a tool for this removal?

[@ForceBuilt]

Just anything you can use to insert into the hole that will allow you to compress the spring and twist. This video is old. What about a small ratchet with an extension? Thanks for watching!

[@michaelstout8152]

@ForceBuilt Thanks for replying, I didn't realize how great the spring pressure was but I ended up using a square shaft Phillips head screwdriver. But anyway thank you for your video, tremendous help!

[@ronnielewis1862]

Thanks for sharing gotta fix my 91 loose also need new key set?!!😊😊😊

[@ForceBuilt]

Good luck! It will be worth it!

[@truiz555]

Thank you.

[@ForceBuilt]

Welcome!

[@dyer2cycle]

Got to do this to mine..loose as a goose...and not looking forward to it. Ridiculous that they put those bolts in a spot where you have to take that much cr@p out to get to them...should have at least used Loctite on them from the factory(they obviously did not). The kicker for me, is I have absolutely no use for a tilt steering column anyways..if it had had a non-tilt steering column, I would not have this problem....

[@ForceBuilt]

Agreed Dyer2cycle. It is harder than it should be. Thanks for watching!

[@josephbuckley3619]

Good job! Funny how everybody skips part that hard part. If you happen to know of one that doesn’t shoot me a link. Please

[@ForceBuilt]

Yeah, I know. My son wasn't there at the moment when I did it, so no one to hold the camera. I'm not sure it could be filmed very well. I had my hands covering up of what I needed to show. Anyway, thanks for watching and good luck.

[@michaelnohrenberg962]

Thank you for vider

[@ForceBuilt]

You are welcome! Thanks for watching

[@RobertBarkley-n2i]

Thank you 😊

[@ForceBuilt]

Your Welcome!

[@bmeade1287]

That is the scariest thing I have ever seen, lolololol.

[@ForceBuilt]

Yeah, and this is a pretty common problem on these trucks! Thanks for watching

[@bmeade1287]

@@ForceBuilt yeah, unfortunately, I am getting ready to do the same repair. Thanks for the video and the encouragement.

[@obsjoel_]

@@bmeade1287 mine just started doing this🤦🏽‍♂️ so sad

[@bmeade1287]

@@obsjoel_ I have ended up doing 2 so far. They really aren't bad at all.

[@pkennedy4256]

I had the same floppy steering wheel problem.Put it in the shop they said there is a way to tighten the 4 bolts. without completely tearing it down. Thats what they did so no lock tite unfortunately. When I got it back the bright light switch wouldn't work.

[@lht5dy31]

Brain surgery Gonna have to take it into a shop A tad too much for my novice experience 😞

[@ForceBuilt]

Haha, it's not for everyone lol. Thanks for watching!

[@twowheelpursuits]

Check out my 91 K1500

[@denverkenyon3203]

Is this the same for the S10? I got this exact issue but I don't want to take it apart if I need different tools.

[@ForceBuilt]

I don't know. Very possible. I understand not wanting to take it apart.

[@oikhlailoi]

Doing mine right now, started with lock cylinder and now I need to go all the way to check those bolts, steering wheel was hella loose after install but everything looks very similar, except on the s10 you will need to remove lower dash a bit to get to unplug the turn single assembly so you can pull it all out

[@warmsleypullins2773]

I want to be a mechanic but this seems like rocket science to me