916hp

Replacement set for ratchet wheel 12.5 = 1⁄2″ square
For HAZET reversible ratchet 916 HP
More information:
www.hazet.de/kat_p_en/896213894
Weitere Information:
www.hazet.de/kat_p_de/896213894
Visit us on / besuchen Sie uns:
hazet.de
Facebook / hazetwerk
Instagram / hazet_1868_official
Linkedin / hazet-werk-hermann-zer...

[@Saltamontes1]

After seeing the proofs of the video, I became more convinced of the quality of Hazet's tools.

[@jonathansporleder3551]

Thanks a lot

[@kashi2843]

I checked the pdf - it states the grease has a compound H318-Causes serious eye damage - transparency of Hazet is appreciated, will use gloves and eye protection while using this grease. previously I have used super Lube dielectric grease , its better than silicone grease or synthetic grease.

[@dobromirdishkov8823]

What type of lubricant is proper for this ratchet as maintanence?

[@hazet-werk]

This spare-part set comes with the optimal lubrication grease

[@dobromirdishkov8823]

@@hazet-werk Logical, but i am asking when i maintain my ratchet, what grease is proper? I am not going to buy a spare kit everytime i regrease the ratchet.

[@anurag77719]

Silicon grease!

[@hazet-werk]

@@dobromirdishkov8823 The lubricating grease is Rheogel TEK671F www.hazet.de/media/Hazet/Sicherheitshinweis/863hp_11_916hp_10_sicherheitshinweis_en_de.pdf

[@kashi2843]

@@hazet-werk I checked the pdf - it states the grease has a compound H318-Causes serious eye damage . can any other generic silicone grease do the job?

[@kashi2843]

0:14 Due to usage of screwdriver which is hardened seems to have higher HRC than the ratchet head, has scratched the phosphate coating - that's really bad! I am using a hard plastic trim remover to open the circlip thereby eliminating any scratches during maintenance - My humble suggestion to Hazet is, pls also add a hard plastic pry tool to remove the circlip in the kit. Thanks for this masterpiece product from Bharat.

[@hazet-werk]

Thank you for your suggestion - we will transfer it to our product management