DRY PACK SHOWER PAN For Beginners --- The Easy Way!!!

[@wyseguy77]

Scares me how many "tile guys" are yelling "DON'T SCREW INTO THE SHOWER PAN!" As an installer we should know that there are different methods available now and should be able to recognize that he's using a top sealed method with no pre-slope or pan liner. I understand the average diyer not being up to date with our practices (Isaac is doing his best) but come on installers, we need to do more to educate ourselves within our trade.

[@wyseguy77]

That being said. Yes if you're using a pan liner or hot mop this method is not for you lol

[@isaacholzwarth]

Just a homeowner and diyer here, just commented under someone else's comment who was doing just that, I felt the need to make sure other homeowners understood this, scares me that I would see that and a "professional" wouldn't😂

[@steveaustin2686]

So is this a method without using vinyl sheets over the walls and floors? How do you seal everything? Is there a website describing this method? We are trying to fix our shower and contractors are scarce. The ones who are answering are super expensive, as there is apparently a lot of demand in Florida. This training wheels method is the best we have found for getting the proper slope on the floor and we would like to try it. Do we do this over the vinyl sheets or do the vinyl sheets go over this? Lots of questions.

[@steveaustin2686]

@@isaacholzwarth Thank you. Wandering around the TileCoach vids, I found where he sealed the deck mud with Hydro Ban to make it waterproof. Now I'm looking for an answer about how to put cement board on the walls will a concrete floor. Apparently, that is a bad idea, but no one says what to do where the cement board and concrete floor meet.

[@isaacholzwarth]

@@steveaustin2686 hmmm. I'm not certain about that, I haven't heard that. I do know that depending on code in your area you can use drywall behind kerdi (and I believe the others like hydroban as well) although I've never loved the idea. That's why I'm going to use go board instead, it's already waterproofed so I don't have to use kerdi, and it's really light. Good luck with your project!

[@gino32080]

Contractor in FL here. That mixing technique is genius!

[@carloscortes4312]

I learned how to do dry pack in the 90s. Those guys were really good and pretty fast too. I was never fast but if you take your time you can get those pans pretty perfect. Tile guys have gotten away from this but I firmly believe in what the old timers taught. You should know your craft and this is part of it.

[@robert62462]

Thank you so much for all your videos. I've learned so much. Today i did this method for my shower remodel. It worked great. After all it is my first time ever doing a mud pack. My wife enjoyed the video so much she even jumped in and helped out. Thank you again.

[@briankowald6465]

One of the best shower pan videos I have seen.

[@rixrig6193]

Thank You! This video was SOOOOO helpful to me. I've watched many vidoes but, yours is by far the most useful to me as a DIYer. Again, Thank You I've learned so much from you. This is exactly what I needed.

[@yvonnefredericks8357]

This is the best DIY I have found for a custom shower base. My husband and I are very handy, but neither of us have ever done a custom shower base. Most of the DIY just show bits and pieces or use high cost prefab, but don't actually show it being done old school from start to finish. Thank you. We DIY because we cant afford to hire someone.

[@omarespinosa6709]

My man , you are the MAN !! Wouldn’t be able to feed my family without this knowledge . Thanks Man keep up the good work !!

[@cliffordrisley761]

I used this method yesterday. PERFECT results. First time doing a mud pan. DIYer. Thanks for posting and contributing great ideas to the community.

[@juancarlosrivcub5035]

thanks so much for all,God bless you and your family,Watching from Canada.

[@boc7185]

Bro. The bag method for mix made my day. Been doing buckets. So simple and obvious but a game changer. Thx.

[@TileCoach]

GLad it worked for you

[@johnnewhouse6264]

I really appreciate all the information you put out there I’m a general contractor north of you in Oregon Washington. I am not a tile guy, but I have been doing tile for quite some time. I have learned a lot from your videos. In fact, I went down to Eureka California did a shower for a friend of mine. He was actually my roommate in college and I think I may go back and pull the bench out. They haven’t had a problem but I don’t want them to have a problem in the future and I think I may have done something wrong so I may just go pull it out make sure and re-tile it I don’t want them to have a failure. The pan liner was done right I know that because I watched your videos and make sure it was done correctly so I appreciate all the information to bring love to learn new things. I really don’t wanna do tile it’s not what I do but it’s another skill to put in the toolbox big jobs I sub out to my tile guy. We only do the small jobs. Appreciate you

[@marcellinasfigaro9364]

I’m not a full time tile guy but I’m a remodeler and have been doing tile/showers for many years. There must be a hundred ways to do a shower. I have changed my technique over the years changing with the new methods. Every time I watch one of your videos and see yet another way to do it, I think “maybe I should do it that way?” Nice to learn something new/different. Never seen anyone mix deck mud that way.

[@austindrake3502]

Super helpful!! Just finished my first shower renovation from a fiberglass insert to a full tiled with drypack floor pan base.

[@glennwiltsee7405]

I used this process over the weekend, and I can recommend. I didn't think the "mix in bag" would work, but it was great and mess free.

[@joecrone9862]

Mixing the mud in a bag ?! Ingenious!

[@alanross2305]

I am about to do this step this weekend. I have watched this video close to 20 times and I feel confident I can do this. Thank you SO much for this tutorial. You are a wonderful teacher!

[@lokivato]

Why is dry pack better than wet and set?

[@alanross2305]

@@1969wareid Excellent!

[@Adam-ui3ot]

@@lokivato I would guess wet and set would be difficult to get a fall on.

[@reloadrefine]

Hope you didnt follow this guys lead.. what a fool teaching people to screw through the pan liner.. how many repairs ive done over the years due to this type of install..😳🤢🤮

[@adrianromerocodes3211]

@@reloadrefine lol you're old school then, not knocking the pan liner method if done correctly it still works, but he screwed only into the Hardie backer, those holes then get filled with thin set, and then the waterproofing comes after by means of liquid membranes (redgard, mapei aqua defense, latricrete hydroban) or roll membranes (schlutter kerdi, laticrete hydroban), no pan liner here bud. keep watching him, maybe you'll learn something new

[@jackholl57]

Great video. I’m going to be doing this in a few weeks. You just relieved me of a tremendous amount of anxiety and stress. I’ve be watching your videos for a couple of months now and they are very helpful and educational. You are blessed with two great talents, your trade and teaching. Thanks.

[@TileCoach]

Glad I could help! I am blessed to have great viewers too!

[@FareedHameed]

@@TileCoach Thank you for doing this from Canada. I'm looking to build a small shower over concrete slab and this series of videos have been really educational. Really appreciate the work you've put into these. I'm not sure if it was mentioned anywhere, but how far down should the cement wallboard go down relative to the ground? If water does penetrate the membrane, is there possibility for it to wick up the wall into the framing?

[@clooperman3745]

@@TileCoach Very interesting to see how tradesmen in other countries do jobs, here in England when l did wetrooms l used to get an old guy in who was an old school plasterer and floor layer who could also do fancy plaster ceiling cornice work like you would see in stately homes, when he laid the wetroom floors he did it pretty much like you showed here but usually over a bigger area, ie the whole bathroom floor.

[@johndentice5501]

Don’t do what this guy does, he’s not a tile guy!!! You’ll have problems for sure

[@nicholasbalcom6555]

@@johndentice5501 what problems would you run into?

[@tom-q2m5j]

i never seen any one mix cement using trash bag. New learning today. Thanks

[@geraldmerritt1953]

I wish that I would have found your videos sooner. But you are making it so much easier for me now.

[@johnnyle5107]

simplicity comes with knowledge and experience. thank you bro

[@MarkJones-rd5hl]

One of the better instructional videos I've watched. Thanks!

[@kevinlbrooks9613]

Thanks!

[@johnstachowiak8734]

OMG. That drypack in the contractor bag trick. I was getting ready to buy a bucket auger... not now.

[@TileCoach]

Yes! For up to 3-4 bags its great.

[@luisorlando4294]

This is the video I needed, thanks for sharing not just your skills and knowledge, but also your ability to teach.

[@ArdyDhillon]

Sir your video very helpful for me. After starting watching videos. I made almost 20 new showers. Thanks

[@charlesrichards1673]

Hey Coach - I just completed my shower pan using pretty much exactly your process. I had no major problems and I think you would approve of the job I did. All thanks to your excellent instructions in this video! Thanks.

[@harleysmith3479]

WHAT if your drain is at EITHER end 3x5 pan ant ideas

[@StephenMcDonough-eg5nm]

I hate to say this, but I hope you didn’t screw them boards on like he did at that low of a level that’s against code and it will ruin your shower pan and make your shower pan leak that is if you put a shower pan which I hope you did not trying to ruin any Wednesday or call someone out just looking out for the interest of everyone watching and thinking that this is the right thing to do when is not

[@slaughtertwo]

I have been doing tile for years.. This is so helpful. Thank you.

[@Caymen43]

I always enjoy watching masters at their craft. You are one of those 😀

[@daltonlopez4623]

Sand cement and tradition! Thanks again for the awesome content coach. You've been a tremendous help these past 2 years doing tile. Ive learned the basics, I learned wall floating, now I think I'm ready to try floating a pan. I hope to make a living one day off of this, I am very passionate about it and I only want to do jobs right and they have to look pretty. I finally have tools, budget and the confidence to start a company! I want to give you my greatest gratitude as you are such a concise, chill, well spoken person and really shine a light on the raw talent and drive tradespeople have. Much love from one (former) addict to another (been cali sober 6 years).

[@n3wfri3nd]

This is the best DIY I’ve seen this year - big fan of your instructions, feedback and ideas

[@TileCoach]

Thanks so much 😊

[@edzaffina9785]

You are a wonderful teacher! Thank you for caring so much!!

[@huseyinerdogan9585]

I did this before watching the video and I like this method. First I put waterproof sheets and waterproof cement. After I put this sand mix cement for levelling. The results of the mosaic tile became wonderful.

[@jeffsebastian7990]

Thanks for all your videos man. I am a contractor in Ky but I always like learning new ways to do things

[@billrau2398]

Outstanding video on step-by-step dry pack shower floor base thank you 🙏 for showing us this process A+

[@boristanow9600]

Thank you, buddy! This is the first video after which I see light in the tunnel. Some weeks ago I saw the mud is made as 3 to 1, instead 4 to 1, as you suggested. Please, specify the cement and sand quality next time, so all info in one . Thanks again.

[@thomaspayne130]

Yes we used to buy a bag of Portland & always 4/1

[@MJ-qt4dm]

Sooo glad your channel came up on my screen! I have watched several dry pack videos for showers but yours is by far the most useful to me as a DIYer with no dry pack float experience. I'm subscribed and next will search for a video of yours on sealing the dry pack and laying in the tile. Tx, Mike

[@teaohar2]

I really appreciate your videos. I am not a pro. I have done a few tile showers with no problems, so far. However, you have provided excellent and useful advise for my next upcoming shower project, soon to begin. Beyond that, I want to complement you on the professionalism that you offer in a humble way. You seem like a genuinely good man. What's more, you are, both a technician and an artist at heart. It is a marvelous combination. Keep up the fantastic work in this wee corner of the world.

[@TileCoach]

Thank you! Where are you from?

[@teaohar2]

@@TileCoach I live in Massachusetts and Maine.

[@doofusmaguilacutee4998]

@@TileCoach Central Coast of California

[@gordonshute8816]

Love the mixing tip! Most of the time it's a huge mess. That works great!

[@Myzyri]

Dear god, man! You have to AT LEAST use some basic minimum safety tips. You're helping DIYers. The best thing you can do is teach them how to NOT lose a finger. The table saw shouldn't be on the floor. Get a nice rolling stand for storage. Wear eye protection. Maybe even recommend ear protection. Then put on a chainmail glove if you're not going to use a pushrod. And why don't you have the safety shield or the anti-kick bars on the saw? All that being said, this is an absolutely exceptional video! Thank you. You've given me the confidence to try this myself. Safety up and you'll be a god! This is my first video of yours and I love it! You're so genuine. Good job! Can't wait to watch more!!

[@Aspenlogic]

...not to mention wearing a good quality respirator to avoid breathing fine cement/silica dust deep into your lungs. Not such a big deal for the one time DIY installer but for you that will do 1000 of these over your career that is no bueno! Eyes, ears, fingers, lungs are not replaceable.

[@vanhap]

Really helpful and top tier knowledge, thank you

[@carlosromo3575]

I use this method after seeing this mock up....perfect every time....thanks for sharing this method!!

[@TileCoach]

For all the "screw through the pan liner" comments, please note that the bonding flange drain used in this video calls for a "sealed" system. There is no pan liner in this method, the waterproofing is OVER the mud and cement board. To see more on that, check out this video : kzbin.info/www/bejne/ponbe3mlot-Abas

[@ages24]

Been doing tile for years now and this is actual how I learned it first cause like you said, people that have done it for years use feel, screed lines, levels.

[@cruz47144]

Excellent. This is how I learned to form 25 foot walls with a contractor decades ago

[@andrewf.7813]

Skills! Very informative. I wish I had seen this video before I started my DIY project. I was using a thin metal float and constantly cutting into the cement. I could not get it a smooth as you did. Your videos have been a guide through out bathroom reform, thanks

[@brandonfuller3598]

I couldnt watch the whole video,, but this is a very unique way of installing a shower base 😂 I personally make every curb (if there is one) out of dry pack. And I always use a shower liner,, as an added level of protection

[@norlenflynn]

This was so helpful I just completed my dry pack shower pan successfully because of you! Thanks :)

[@blackcrappie862]

Dude! watched this once and was able to finish a 4x3ft deck perfect, to fit full tiles all the way up to the shelf/knech. thumbs up for this easier way!

[@TileCoach]

Yes!

[@thegreatpatsy]

Awesome video, you make me feel confident that I can do this job. Love your unique techniques!

[@utubewatcher360]

Beautiful!!! You can finish concrete any day of the week for me. Who needs tile with that finish!!! Thumbs Up Isaac.

[@solson223]

So helpful. Thanks for these tutorials and clever way of doing things.

[@hms1018]

As always informative video. I am a DIY'er and I will be using this method in a few weeks, glad I saw it today. I will be adding a 45° angle to the screed notch out to get cleaner edges. Thanks for your knowledge and for sharing it with the world. God bless you and your family

[@SkulkingSkullKid]

That's a great idea-at the bottom? That would help a lot.

[@PugetSoundFlyer]

Great video thank you! I'm planning on using your method however, I'll be putting the mix in dry, slope/level then add water.

[@stevenjohnson8993]

Thank you Isaac. I like to think I'm a pretty good DIY'er. I have flipped several houses but installing a mud bed shower pan felt a little out of my league. I watched around 100 of your videos which are the best on KZbin. This one in particular caught my attention. Installing a new bath at my house, I used my laser level to scribe a level line at the top of the curb and followed the directions in the video. In my case, the FlowFX drain ended up being 1-inch above the floor and the perimeter line was at 1.75-inches. I was extremely nervous being my first time and as I was by myself and didn't know how much time I had to work the mud. I also didn't know if I had enough deck mud. I mixed 4-50 lb bags and hoped for the best. I had made 2 screeds, 1 short for the sides and one long one for the corners. At first I was freaking out because it is definitely not as easy as I thought it would be. I took a few breaths and went to work. The first thing I realized I wasn't very good with the wood float. It just seemed to make a mess when I tried to make circles. But the closer I got to correct level, I started to get the feel for it. I worked at it for a while using the screeds. Flattened with the wood float, and then final finish with the steel trowel. As it turned out, I used the full 4-50lb bags. There was less than a handful left at the end. The final outcome was fantastic and I look forward to installing the waterproofing and tile. My only recommendation is to make sure you have enough mud. Way better to have too much then find out you need more. Thanks again for your fantastic videos.

[@christophercasanova9335]

Could you show this method for a curbless shower with off center drian,love your stuff brother!!!

[@looshy9240]

Best tutorial I’ve seen so far, you know your stuff bud.

[@tlowride2000]

Looking to fo my first dry pack for a dog bath. Thanks for the easy to follow lesson!

[@jerryminyard7460]

Every one of your videos is awesome tile coach. Thanks

[@tomtillman]

Great idea! trying to do it from just a marked line is very difficult.

[@Fcjm03]

I’ve watched this video 3 times…. Great work brother

[@escapingthematrix3]

This is going to be my 3rd successful mud pack tomorrow let you know how it turns out many good tips thank you

[@ethanswazey4241]

Chase is the man! Best drain around!

[@msimbo93]

Like others have said, I am so glad you made this video. Thank you, thank you, thank you!!! Loved the thought and detail you gave to creating the process. Great for DIYers. So much knowledge and experience wrapped into this video. MDF is inexpensive and easy to work with, drawing reference lines and putting down ledger boards, making jigs for screeding, using a bag to mix deck mud, showing your technique and explaining why you do things - Brilliant! Btw, your method isn't "dummy proof", it's a method that is inexpensive, efficient, and repeatable - its a great method & process! Keep up with the great work and content!

[@hilirioalvidrez8538]

Que pasó,? Con your liner?…..

[@hilirioalvidrez8538]

That,

[@reloadrefine]

EPIC FAILURE!! Nailing through a shower pan 🤒🫣

[@workingshlub8861]

great tips....ive tiled alot of walls but always been never attempted this ...this is a surefire way

[@kellireece6348]

I LOVE this method. Thank you so much for taking the time to impart your knowledge to those of us who really want to learn. Bravo, dude. Bravo.

[@chefblair63]

Love your videos. I am confident I can do this.

[@ericbotten7053]

I just used this method and it worked great, thank you!

[@ryanluttenberger358]

Thank you so much for this! Been looking for a good demo for dry pack.

[@dondonaldson1684]

Excellent video and "training wheels" technique. Like all trades, working is all about feel for the material. You definitely have the touch. Thanks for the demonstration, it is appreciated!

[@djdubbs313]

That's some nice mud, smooth like butter

[@mminnes1]

Super interesting and informative. Is there a follow up video that shows how to waterproof the dry pack and how to tile the dry pack?

[@benisiobocolo200]

this technique is very smart let's thank JEOVA only he allows this knowledge

[@SuperiorDave]

What?

[@mattalexhoward]

will definitely be booking your time to help me with a tile project! Thank you!

[@sukeywatson1281]

Very cool. I am going to do my shower in the next day or two. It is a 3’x6’ shower. I like the training wheels.

[@rasmorgan11]

Very cool mixing technique, thank you for sharing!

[@govsux1]

I've done similar by cutting hardi board around the perimeter as a ledger and just leave it in there. I cut it big enough it wedges in so not nails. But I like this idea better gonna give it a try. Great video thanks

[@roberthasili1447]

Soo helpful. I'm like apprenticing. Getting ready to tackle shower, Thanks

[@derekstewart4215]

Ordered my flow fx drain and will be using this method soon. Thanks so much for making this video. Never done a dry pack or shower pan before so I’m sure I’ll watch this video three more times lol.

[@castman109]

Hahahaha love it I thought I was the only one who mix In trash bag! Works great of bathroom is upstairs

[@katycinco9642]

Hi , watched your videos. Most detailed and logical. Trying to do my bathroom on my own. When I removed the tub, noted my floor board is cut much larger than drain. Please share what shall I do to cover this if I go with conventional shower pan (pour pre-slop and then mud and then tiles ). So you think I should simply go with iron shower pans ? Can’t add a picture here.

[@michaelappleyard8599]

Thank you so much for the work you do in putting your videos together and making them available. I have found them to be an invaluable resource for the DIY community! I completed my shower base today using this method and am happy with the results. Is it perfect? No... but I think it is better than what I did 20 years ago, and certainly good enough! It's got the proper slope and darn near perfectly level all around. Thank you again!

[@briankelley6024]

great content and enjoy watching, but how would you do it with a 5 x 3 shower with the drain at one end not center

[@Blindguycreations]

Thank you so much. Great video I’ve done lots of tile work well pretty much every type of work do you do when a house. But I’m doing my first shower and I was pretty nervous about how to get the slope done correctly. So awesome job really appreciate it

[@alexe1563]

Watching from France. Great tutorials. Thank you!

[@TileCoach]

Thanks for watching!

[@xuv224]

Thank you for this great video. Towards the end you said the deck mud shown is not the one you normally use. Which is the deck mud you would recommend?

[@MrTomac4]

Must have watched this video 6 times and finally did the job yesterday. A few pointers: 1. Get the drain packed in solid first. Had my drypack move wile trying to make sure it was level. See #3 2. don’t be afraid to pack down as you go. I ended up having a low spot a few inches outside the drain b/c the drain was packed but the rest wasn’t. 3. If you’re attaching the flow fx to an existing stub out, add the thinset to the drain flange first then do the pvc/abs glue. Makes it a lot easier to level. The sakrete sand mix I used says to let it cure with plastic over the top, so that’s what I am doing. Seems like keeping it moist longer will aid in Hydration and curing. Probably going to wait 72hrs before applying hydroban. Thanks Issac for your guidance here!

[@yamesmon7811]

Great method other than screw holes below the curb. If you are going to do this, you should make your first line above the curb (on top of the level set onto the curb) and use wider stock so you don’t puncture the membrane below the curb.

[@dchurch911]

He's not using a membrane here. This shower is getting a liquid membrane in the next step.

[@gregkeeyako]

No membrane, remember...no preslope either..

[@joelmaze4359]

Exactly. Never puncture the membrane

[@Maverick5089]

@@joelmaze4359I’m getting ready to do this. I’m going to use go board. Wouldn’t I be ok drilling below the curb anyway vs the way he did it. I wouldn’t have to use a table saw and just buy 1x2 and be done. The holes I’ll use to hold the wood would be seals and then hydro ban or membrane after. I’m I missing something? I’m planning on using kerdi sheet membrane and then hydro ban on top of that 😂 first time doing this 😂 🤷🏽‍♂️

[@joserenteria9972]

Bro! This is exactly what I needed. I’m going to try this on my walking-on shower when my house is completed (cookie-cutter track). Thanks a lot!

[@phillipkobzeff2529]

Thank you so much! What a great teacher. Great videos!

[@sshirkhan22]

Just wanted to thank you for the tremendous amount of effort and thought you put into these videos to teach us the easiest ways to achieve great results. The amount of time you take to make everything perfect says a lot about your work ethics and the pride you take in your skills you have learnt through years of experience. I haven't only learnt about tiles from you but also learnt how to do the job the right way how to be proud of the finish product at the end. It's not easy to find great people like you so thank you.

[@TileCoach]

Thank you. Keep it going!

[@nole8923]

I had my shower custom made with cultured marble. The floor of the shower is a cultured marble mix that was poured into a shaped fiberglass basin. No mud required. Virtually no chance of water leaking out unless somehow the drain wasn’t installed properly. The walls of the shower are cultured marble. No grout. It cost a lot of money but worth it.

[@Antzzz_Manzzz]

Very thorough video. Thank you my friend 🙏🏼

[@vinhgolf]

great video. do you have a video how to build the curve using permabase? like the one here. thanks

[@JessTess099]

Thank you for doing these. Now I know I can do my own shower!

[@marioduran8224]

Just love your videos and your skills and thank you so much for sharing them. God bless you always!!

[@rhyfelwrtherwyn1070]

Isaac, these are great!! You definitely have a talent for teaching what you know. I can’t thank you enough for all you do. These are the best videos with content and production value. (Just need you to move to TEXAS now!! 😉). Have a Grest 2022!

[@curiouskitten]

Awesome instructions!!! I love you, too! What's next after this step?

[@Damon8or]

Awesome video, thanks! I used a foam substrate on my last remodel, but this give me confidence to try dry pack.

[@jacobclanahan5706]

I don’t know if you have ever seen and tried this method but over where i’m at in California it’s pretty standard to make your screed out of wall float once your done floating the walls