92 60 Hp Johnson / OMC Service Bulletin / I Need a Trim Gauge /

Time to Service my 1992 Johnson 60 Hp Outboard. OMC WOT TIMING ADJUSTMENT SERVICE BULLETIN. Oil Change & Paint. I Need a Trim Gauge! Follow the Real Life Saga & SUBSCRIBE TODAY ! You Never Know What's Gonna Happen Next ! It's This Old Outboard. Resurrecting Old Outboard Motors. YOU KNOW THE CHANNEL !
#outboardrepair #outboardrepairvideos #outboardenginerepair #outboardpropellerrepair #outboardtrimmotorrepair #outboardstartermotorrepair #outboardrepairand #boatrepair s #boatrepairvideos #outboardmaintenance #johnsonoutboard #outboardtiming #evinrudeoutboard#boatrepairkitdreamlightvalley #boatrepairproducts #marinerepair #oldoutboard #thisoldoutboard #trimtabs #diytrimtabs

[@artstates960]

Engine looks good and sounds even better! Thanks for the rip around the lake.

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@djkarcher1896]

Man, that's a buzzer. Love the sound of it, throttle response seems great as well. Nice to see you doing what you love, and just having fun!

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@Kyle-bb9zp]

Nothing like a outboard better than a inboard engine

[@THISOLDOUTBOARD1]

Thanks again !

[@AAE-cg1il]

You got it dialed in……………fishing time.

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@Dan_Akins]

Looking good!

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@mwatkins2464]

Well man you got you a nice ride now!!! So now it’s time for some fishing videos!!! 👍🙏

[@THISOLDOUTBOARD1]

Thanks for tuning in! It's hot out there!

[@doc3584]

Looks good ! My little boat is ready but trying to get the trailer and boat registered in Virginia is like pulling horse teeth.👍✌

[@THISOLDOUTBOARD1]

Thanks 👍

[@user-yd4mr8jr6o]

The price of paint now days is crazy I’m getting sick of everything tripling in price now days enough of the price gouging great job on the boat see you in the next one 👍🏻🤘🏻

[@vandos11]

Bidenomics

[@THISOLDOUTBOARD1]

Thanks for tuning in! Yeah it's crazy!

[@CaptnGlenn]

Good to see the big 70 horse flying on all 3 again!! Great work! 😁👍

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@andrewgonzales224]

That 60 horse was flying. Sounds like its fine tuned. Glory to the Lord Jesus

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@Kyle-bb9zp]

Motor runs good

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@danielrobert7181]

Is it only me or maybe have you switched to a different camera microphone but the engine appears to "sing" at WOT ? Besides, the optimal trim adjustment really minimizes that "mustache" water spray in the back ... he, he, he !

[@THISOLDOUTBOARD1]

Thanks for tuning in! It must be you! Hahaha I just played it back, sounds same to me. It is a new camera I've been using for a couple months now. ??

[@randymiller1604]

I used my fuel gauge for a trim gauge it works great

[@THISOLDOUTBOARD1]

Thanks for tuning in! Wow. Cool idea!

[@victorremick9721]

She is a screamer. Best motor you have ever had Dont blow it up

[@THISOLDOUTBOARD1]

Thanks for tuning in! Hahaha!

[@TheSteelworker]

She flys and sounds good too! It looked to me that you painted over the water inlets on the lower unit without masking? Maybe I just didn’t see correctly. Was just curious. Good video! 👍

[@THISOLDOUTBOARD1]

Thanks for tuning in! No, you saw it right. I wasn't using a roller! Hahaha Thanks again !

[@vandos11]

Bump it up !

[@THISOLDOUTBOARD1]

Thanks for tuning in!

[@fastwin493]

That "mustache" water spray is because the motor is mainly mounted probably too deep! At WOT the AV Plate should be riding just about at the surface of the water. And, also at the same time... trimmed just down from the point where the motor is starting to VENTILATE & the rpm's climb radically higher while making no more speed increase. Also with that, the OPTIMAL rpms should be within the MIDDLE of the 5,000-6,000 factory WOT range (5,500 rpms) of course! 😊

[@THISOLDOUTBOARD1]

Thanks for tuning in! Outboard was mounted properly and perfectly aligned plate with boat bottom. It's all in the videos! Thanks again !

[@fastwin493]

@THISOLDOUTBOARD1 Yes, I know all that. But, being aligned parallel at the bottom level of your V hull is only a good rough BASIC INITIAL GENERAL STARING POINT REFERENCE. That is not enough to be "absolutely perfect". Your particular hull, prop and trim settings height can need to be "fine tuned" accordingly for full EFFICIENCY & optimal PERFORMANCE. If that's what you are really interested in experimenting and chasing. I know it's hard for you as only one person, to be able to observe the actual level of the AV plate with correct maximum trim (without starting to ventilate)... mounting hole at WOT. Which, is the only way for sure to know where you are (height wise) really at WOT operating coditions. Regarding the final working engine & AV plate mounting height. I suggest you mount your camera at the stern while under way. To record and play back, to know where the actual height is. Again... it should just skim slightly above or just below the surface. Where you are set at right now... may not actually be where you expect & think it is. 😉

[@THISOLDOUTBOARD1]

@@fastwin493 Wow. I was gonna say all that but changed my mind trying to catch up on all those comments. Mounting a camera and all, like I did on the clipper with the 30! To funny! Don't forget Prop diameter & pitch too. I've actually raised the motor up one hole since I firsts installed it. And thats probably all its gonna see other than back down again. Won't be drilling more holes! I will run a camera so stay tuned for that. Thanks again and have a great 4th! C U in the next one!

[@fastwin493]

@THISOLDOUTBOARD1 thank you! Have a great 4th yourself! Have some brewskis and get out & soak up some sun. 😃 And, never forget, it's America FOREVER! No matter what the bastards try to do to us! 😬

[@dannyneihart1821]

My 50hp Johnson WOT is 19. Using the Joe Reeves method where should I set it? Thanks for the videos! Always look forward to them.

[@THISOLDOUTBOARD1]

Thanks for tuning in! Here's how. forums.iboats.com/threads/joe-reeves-wot-timing-procedure-verified.225947/

[@outboardfun3353]

I'm thinking a trim Gauge and some new decal for the cowling

[@THISOLDOUTBOARD1]

Thanks for tuning in! Definitely !

[@thegoldman246]

maybe new decal stickers will make it go faster.Just sayin.

[@THISOLDOUTBOARD1]

Hahaha! Yeah Lightning Bolts sound good!

[@bryanmorrion9503]

What about the anodes. Should you sand the paint off them so they work or is it fresh water you’re👍🇦🇺🦘 in.

[@THISOLDOUTBOARD1]

Thanks for tuning in! Yeah it's fresh water!

[@thomasbooth9079]

Electrolysis is still going to happen in fresh water, just not nearly as bad or fast… the paint will probably come off of it enough that the anode will do its job.

[@THISOLDOUTBOARD1]

@@thomasbooth9079 Yes ! Thanks for tuning in!

[@beercan64grissom15]

Rattle can tune up,,,,lol

[@THISOLDOUTBOARD1]

Hahaha! I been wonderin bout chu.