How to install rear disk brakes on a OBS Chevy truck or SUV kit from Little Shop mfg
Пікірлер: 228
@mehwhatever11133 жыл бұрын
Awesome vid sir! Definitely like the idea of not having to pull the axle off, I’m totally going to do a conversion now. Thanks!
@Slicpartna3 жыл бұрын
Thanks for the compliment, Let me know if you have any questions
@MichelLinschoten3 жыл бұрын
Why would you pull the axle off anyways for a disc conversion?!
@kellismith4329 Жыл бұрын
@@MichelLinschotencuz you need to remove the flange to attach a bracket
@Chevro917 ай бұрын
@@Slicpartna Your suburban is next to the only bolt on notched suburban out here on a KZbin video I have some install questions and particulars if you have IG or any other way to dm ?
@xIDIEATIH233 жыл бұрын
Literally just started looking into conversion kits 15 minutes ago. Went to KZbin after to see a step by step and man this video was the first I clicked on. Great explanation and just ordered the parts man. Thank you!
@Slicpartna3 жыл бұрын
Cool cool Let me know if you have any questions
@originalman84973 жыл бұрын
Awesome brother! what a great video my ls1gets swapped out tomorrow! Brakes are my next step! Thanks again
@Slicpartna3 жыл бұрын
Thanks for the compliment, You will like the LS engine I recommend the Little shop mfg for the rear brakes The kit is complete with everything Let me know if you have any questions
@6thspoonz7793 жыл бұрын
@@Slicpartna sir can you email me the info to get the rear brake kit? Thanks
@Slicpartna3 жыл бұрын
@@6thspoonz779 please check little shop mfg website www.littleshopmfg.com/ Look for your specific application or you can email them Very helpful people Let me know if you have any other questions
@sega7023 жыл бұрын
lot of good info, thank you....and you are so correct. The rears have always been the worse on these trucks
@Slicpartna3 жыл бұрын
Thanks for the compliment
@laurencevillegarage3 жыл бұрын
It’s a nice kit, I put one on my ‘95. Bought so I would not have to pull the axles. Turns out my axle seals were leaking so I ended up pulling them anyway. Nice kit and fairly easy to install. I also replaced my master cylinder with a ‘02 Tahoe mc, worked out very well. Nice video!
@Slicpartna3 жыл бұрын
It is a very nice kit, it was was packaged well and simple to install Im using a NBS master cylinder as well Thanks for compliment
@FSEVENMANАй бұрын
Nice upgrade dude I'm doing my too. Thanks for the vid 😊
@SlicpartnaАй бұрын
@@FSEVENMAN let me know if you have any questions Thanks for watching
@sega7023 жыл бұрын
props on cutting out those inner plates...time saver from opening up the diff, and pulling the axles.
@MrTaxiRob3 жыл бұрын
I've watched a few different types of kits installed and some of the mounting plates require pulling the axle seals as well. I don't like the plates in this kit but the calipers and rotors seem like the best combination so far. Seems like the plate should fit tighter and not be able to go around the lip of the seal...
@jjut61822 жыл бұрын
Just got a 2wd 2 door Tahoe, got a lot of the suspension “done” for now, in the middle of body paint right now. It’s still my daily so. But a very helpful video, excited to put this set up on mine I’m sick of the drums too man
@Slicpartna2 жыл бұрын
Thanks for watching Let me know if you have any questions
@sega7023 жыл бұрын
you should do another video of bleeding procedure, and review overall performance.
@Slicpartna3 жыл бұрын
I wanted to do it all in the same video but I felt it would have been too long. I will do a follow up on the overall performance
@09nedly092 жыл бұрын
Holmes, I hear you. Even if they work just as good or not much better, I would still rather replace pads vs shoes. Great upload. Cheers 🍻
@Slicpartna2 жыл бұрын
You better know it! Stay tuned for more to come Thanks for watching
@marlonjones79973 жыл бұрын
I hate drum brakes but in my obs just went to a 2000 and up shortbed rearend👍🏿
@larrymelroy56877 ай бұрын
I was wondering if that would work did the Leaf springs springs match up and everything?
@alphasaiyan5760 Жыл бұрын
Drum breaks ! Ain’t nobody got no time fo dat ! Lol yeah man awesome video. I got my 99 suburban work truck and I carry about a couple thousand extra pounds of tools and ladders in and on it. I really need to do this !
@Slicpartna Жыл бұрын
Thanks for the compliment It has made a difference in how it stops You will not regret doing the upgrade Let me know if you have any questions
@alphasaiyan5760 Жыл бұрын
@@Slicpartna yes sir. I am looking into it and I appreciate it. 👍
@wasabifiend3 жыл бұрын
Nice vid, good detail and explanation. I like the music too!
@Slicpartna3 жыл бұрын
Thanks for the compliment
@chillieholsendolph64853 жыл бұрын
Like the video. I aso have the same truck am looking to change my back bakes to disc brakes it looks a lot better 👍
@daleescareno8694 Жыл бұрын
That's funny you'd say that you reminded me of that guy that was humping the exhaust pipe on that little car on on Facebook
@bcwilliams61473 жыл бұрын
Nice install video.
@Slicpartna3 жыл бұрын
Thanks for the compliment
@metaspencer2 жыл бұрын
great video man ... very cool to see how you did it
@Slicpartna2 жыл бұрын
Thanks for watching
@Peewee04132 жыл бұрын
Good shit bud...
@Slicpartna2 жыл бұрын
Thanks for watching
@anthonyanderson4642 жыл бұрын
The later model master cylinder they offer will help even more than just the rear disc.
@Slicpartna2 жыл бұрын
Yep yep I upgraded to the nnbs master cylinder Thanks for watching
@jayanderson54022 жыл бұрын
Would have liked to see a finished test drive and performance review, but appreciate the video.
@Slicpartna2 жыл бұрын
appreciate the compliment thanks for watching
@nonameisthename1383 жыл бұрын
Bro you are absolutely right about drum brakes. I was talking to a buddy of mine about them, and I told him they are a safety Hazzard! Its a reason why manufacturers UPGRADED from them. I'm about to do the same thing on my OBS too. But I'm going through the rear-end as well, gonna do a posi on it
@Slicpartna3 жыл бұрын
You will definitely like and enjoy the upgrade Let me know if you have any questions
@nonameisthename1383 жыл бұрын
@@Slicpartna Will do, thanks brother👍✌🙏🙏
@joetroutt7425 Жыл бұрын
I was told one time that converting your rear drums to disk was not a good idea bc the rear disks would grab just as hard as the fronts sending you into a skid.
@Slicpartna Жыл бұрын
I haven't had any issues, The proportioning function in the master cylinder is still there The front to rear bias will not change Let me know if you have any other questions
@cadaverdogblix74482 жыл бұрын
Definitely looks sexy, and you've also lightened the rear end, and its so much easier to do a brake job with fewer parts, great video dont stop making them 👍🏾
@Slicpartna2 жыл бұрын
Thanks for the complement I most definitely will have more content coming I'm currently building a LS 383 Thanks for watching
@randallthomas11763 жыл бұрын
Awesome, thanks I gotta get mine done!!
@Slicpartna3 жыл бұрын
If you do the conversation, you will not regret it Let me know if you have any questions
@BLACKRAIN3903 жыл бұрын
GREAT VIDEO FAM
@Slicpartna3 жыл бұрын
Thanks for the compliment
@jamescole31522 жыл бұрын
Wow what a great video. I love it.
@Slicpartna2 жыл бұрын
Thanks for the compliment Thanks for watching
@BLACKRAIN390 Жыл бұрын
I NEED THAT CONVERTION ON MY 97....WHERE YOU LOCATED, UM IN FLORIDA
@Slicpartna Жыл бұрын
You can find the conversion kit at www.littleshopmfg.com located in Tennessee
@StlMar3143 жыл бұрын
If you haven't swapped out your master cylinder.. Swap it with a NBS master cylinder.. I have a 02 MC on my 96 Short Bed.. Really gives you a firm brake pedal..
@Slicpartna3 жыл бұрын
Yea yea, I swapped the master cylinder Thanks
@kellismith4329 Жыл бұрын
Rear disc brakes are a headache, I will take drums any day - yes the drums are more difficult to rebuild, but you might do it twice in the life of the truck - the discs are always giving you issues
@Slicpartna Жыл бұрын
Why do you say rear disc brakes are a headache? I haven't had any issues with my rear disk brakes on any of my rides Idk
@larrymelroy56877 ай бұрын
Did the emergency brake line match up What's what they gave you in the kit or was there any mods you had to do?
@Slicpartna7 ай бұрын
I had to use a longer emergency brake cable, if I remember correctly i use one from 3500 that I picked up from rockauto Let me know if you have any other questions Thanks for watching
@bobertgregory85402 жыл бұрын
good video with good info thanks man
@Slicpartna2 жыл бұрын
Thanks for the complement And thanks for watching
@datdudetheyhate41219 ай бұрын
How bout a link to where u bought them and thanx love the vid
@Slicpartna9 ай бұрын
Thanks for watching Below is the link where I purchased the kit www.littleshopmfg.com Let me know if you have any questions
@jaredbrown68953 жыл бұрын
Hey there, I noticed you skipped the clip at 9:30 , did you have any trouble getting that black bracket onto the axel body ? It looks too tight to just slide onto it. Any tips?
@itcomesinwavves7 ай бұрын
How is it holding up, sir? I'm looking to buy this kit pretty soon here
@Slicpartna7 ай бұрын
It is holding up fine with no issues, I wish I would have done it sooner! Let me know if you have any questions Thanks for watching
@hinkhausr3 жыл бұрын
Did you look into changing your master cylinder to the nbs? Ive heard even with drums it makes a world of difference.
@Slicpartna3 жыл бұрын
I did upgrade my master cylinder to nbs It is an improvement Let me know if you have any other questions
@samclark55912 жыл бұрын
Great info! Thanks! I have a 97 2 door 2 wheel drive. What year did you go with for the NBS master cylinder?
@hinkhausr2 жыл бұрын
@@samclark5591 I haven't done it yet but iam pretty sure it's 99 to 07. If you do a little searching you can find more info. Like I know you need an adapter for the rear line to the nbs master and maybe something else.
@Dew4113 жыл бұрын
Good Job ! 🔧🔧
@lawjo19783 жыл бұрын
I see you went and got the kit for the Burb. I hope you like the kit bro
@Slicpartna3 жыл бұрын
Oh yea It is a nice kit, simple to install That back plate was a bear to cut off plus I had my concerns about the calipers being too close to the air bags but everything worked out good Thanks for watching the video
@lawjo19783 жыл бұрын
@@Slicpartna Manmm that back plate is no game at all to cut. I been really thinking heavy about going air bags or either dropping my Burb. How's the ride with the airbags on your truck?
@Slicpartna3 жыл бұрын
@@lawjo1978 the airbags are nice real nice. It is like riding in a luxury vehicle riding on air. A static drop would be nice too There's something nice about a lowered chevy
@lawjo19783 жыл бұрын
@@Slicpartna ..... A lowered Chevy is very sexy. I love a luxury ride I tell you
@firearmconvention9463 жыл бұрын
After you did cut off the old drum you did not show how you did get the new bracket on! Why?
@Slicpartna3 жыл бұрын
Hey hey Putting on the new bracket is straight forward Just orientate the bracket according to the directions
@Brandonenixon3 жыл бұрын
Great video! I am wondering what four link suspension is that you have in the rear? Ride tech?
@Slicpartna3 жыл бұрын
Thanks for the compliment. It is a ride tech 4 link
@altonfaulkner4729 Жыл бұрын
I've been wanting to do this on my 97 , doesn't look that hard
@Slicpartna Жыл бұрын
Na it isn't hard at all Let me know if you have any questions
@vernonvest99273 жыл бұрын
Would you share the cost of your conversion.
@Slicpartna3 жыл бұрын
It was about $550
@richodd22922 жыл бұрын
does it make much a difference? I had new drums and shoes and stop just fine, not sure if I do this if it wont be much better or if the truck value would even go up
@Slicpartna2 жыл бұрын
Yes it makes a difference. as drums heat up they lose stopping power. Remember manufacturers stop putting drums in the front for this fact. It all depends on your expectations to do it or not. I did it for the increase in stopping power plus.... It just lookz cool! Let me know if you have any other questions
@juanignaciosanchez19182 жыл бұрын
Hello. Where did you buy that complete kit?. I have a 94 Chevy suburban and I want to do this conversion. Thank you very much for your coment.
@Slicpartna2 жыл бұрын
Hey hey I bought the kit from little shop mfg littleshopmfg.com/ Let me know if you have any other questions Thanks for watching
@juanignaciosanchez19182 жыл бұрын
@@Slicpartna thank you very much for everything
@Slicpartna2 жыл бұрын
@@juanignaciosanchez1918 let me know if you have any other questions
@TheRealEmTown4 ай бұрын
Where'd you go for your drilled/slotted rotors
@Slicpartna4 ай бұрын
I got the rotors from summit racing Let me know if you have any other questions Thanks for watching
@danlevesque54372 жыл бұрын
Did you bend the existing brake line over to reach the caliper or cut it out and start with a new line
@Slicpartna2 жыл бұрын
i manipulated the brake line into place It wasn't a bad install Let me know if you have any questions Thanks for watching
@blockbeatah83042 жыл бұрын
Can I get a part number for the T valve please ? Thanks ! Keep up the good content!
@Slicpartna2 жыл бұрын
Hey doc Thanks for watching What part# do you need?
@matthewszalkowski47198 ай бұрын
What year of truck do you buy rear pads for and what model
@Slicpartna8 ай бұрын
79 Cadillac Eldorado, I'm sure there are other vehicles that use that caliper but I reference the 79 caddy el dog Let me know if you have any other questions Thanks for watching
@joseserrato70153 жыл бұрын
How did you install the parking brake cable? I'm having trouble with installing it?
@Slicpartna3 жыл бұрын
I had to splice in a 6-8 inch extension to make it work, the passenger side was no issue Let me know if you have any other questions
@CarlosSanchez-cj5wo3 жыл бұрын
Got any videos on your 4 link?
@Slicpartna3 жыл бұрын
Unfortunately no, that was done prior to me documenting my build Let me know if you have any other questions
@mikethompson72903 жыл бұрын
hanging the hardware is easy, What i cannot find out from anybody is how the brake balance is , the calipers need more pressure than a drum wheel cylinder and I worry about stopping power without a new master or proportioning valve. Not one aftermarket company who sell these kits even mention brake balance. some offer a Master none offer any info on balance. I'd like that info
@Slicpartna3 жыл бұрын
I don't have any info on brake balance but my braking is improved over the drum set up
@jesser2143 жыл бұрын
Hows the breaking with the disc conversion compared to the drums?
@Slicpartna3 жыл бұрын
The brakes are great, no issues at all Wish I did the conversation many years ago Let me know if you have any other questions
@jonthelamb45493 жыл бұрын
If I was to ever need to do a brake job would I just get pads for the front and rotors for the front and put them in the back?
@Slicpartna3 жыл бұрын
You would have to get rotors and pads that corresponds to the setup that you have for the rear. My setup uses rear calipers for a 79 caddy if I remember correctly. I would get rear pads for a 79 caddy. My cross drilled and slotted rotors are from a 95 Chevy impala SS Great question Let me know if you have any other questions
@jonthelamb45493 жыл бұрын
@@Slicpartna alright thanks man. You did good explaining it all in this video definitely gonna look into a kit once I get an obs
@Slicpartna3 жыл бұрын
lamb cool, feel free to ask any questions you might think of I dont mind answering questions
@Lifesmasher3 жыл бұрын
Will I have to get a longer parking brake cable mine has 4 inch lift
@Slicpartna3 жыл бұрын
Yes you probably will need a longer cable Are you using a parking brake cable now with the lift?
@marlonjones79973 жыл бұрын
Good Job Btw 💯👍🏿
@Slicpartna3 жыл бұрын
Thanks for the compliment
@driftliftdraglifestyle1270 Жыл бұрын
Good video. Btw what's your rear suspension set up?
@Slicpartna Жыл бұрын
I have a 4 link with air suspension Let me know if you have any other questions Thanks for watching
@driftliftdraglifestyle1270 Жыл бұрын
@@Slicpartna where did you get it? Or what brand?
@Slicpartna Жыл бұрын
@@driftliftdraglifestyle1270 the 4 link is ridetech, the airbags are Firestone f9000s
@markguevara41973 жыл бұрын
Looks like more work easier to pull the axels
@Slicpartna3 жыл бұрын
It would appear that way but the second side went faster I didn't want to fool with draining the gear oil, sliding the axles out and the associated mess. It would have been too messy and added more time to the project.
@DadsTrucksBarn3 жыл бұрын
Okay here's the real question did you have any clearance issues with your wheels because I see stock will on ground they didn't see if you put it back on but see I'm one that doesn't want to run twenties on things I don't like twenties I like normal sized Wheels
@Slicpartna3 жыл бұрын
Good question, I don't have any clearance issues with my stock wheels. Everything is cool
@DadsTrucksBarn3 жыл бұрын
Sweet
@danielalvarez40622 жыл бұрын
Can you run a 15 inch wheel with this rear disc brake setup??
@Slicpartna2 жыл бұрын
Yes, I'm running a 15" factory wheel now Let me know if you have any other questions
@eribertorodriguez4335 Жыл бұрын
Where did u get the kit from need it
@Slicpartna Жыл бұрын
I got the kit from little shop mfg Let me know if you have any other questions www.littleshopmfg.com
@juliodiaz82803 жыл бұрын
Do those rear rotors come standard on any vehicle?
@Slicpartna3 жыл бұрын
Yes those are standard, it is extra $$ to get slotted and cross drilled rotors Let me know if you have any other questions
@juliodiaz82803 жыл бұрын
@@Slicpartna great. Did that type of rotor come on as a regular on IMPALA etc?
@Slicpartna3 жыл бұрын
@@juliodiaz8280 you can get the slotted and cross drilled rotors that is meant for an impala ss to work The holes for the studs will have to be drilled out a little bit though I have since upgraded to that style rotors I will make video as soon as it warms up outside. 14 degrees is too freaking cold
@Babyonboardtravelingford3 жыл бұрын
i can to buy for amazon or ebay
@Slicpartna3 жыл бұрын
I don't understand the question
@adampalencia30253 жыл бұрын
I had a question hopefully you can still answer mines what happens when it is time to change the brake pads what brake pads would you get ???
@Slicpartna3 жыл бұрын
Great question, I would get pads for a 79 Cadillac deville rear brake calipers Let me know if you have any other questions
@adampalencia30253 жыл бұрын
And do you know if the 454ss stock Chevy wheels fit on that disc brake conversion the 454ss wheels are 15 inch wheels
@Slicpartna3 жыл бұрын
@@adampalencia3025 I'm not sure about that wheels. I would suggest measuring the bolt pattern
@adampalencia30253 жыл бұрын
Yea there 5x5 that’s what I have on my truck right now just wanted to know if it clears the caliper? Because they are 15 inch rims
@Slicpartna3 жыл бұрын
@@adampalencia3025 good deal, my factory 15" rims clear no issues Let me know if you have any other questions
@HustleMindz3 жыл бұрын
Where can i message you about a question that i have ??
@Slicpartna3 жыл бұрын
You can post your question here
@dalwyson12 жыл бұрын
Hello i have a 89 chevy astro van and I want to use that kit to do mine can you tell me the model number you ordered
@Slicpartna2 жыл бұрын
This is the kit i used below littleshopmfg.com/gm-88-00-c1500-rear-disc-brakes-5-lug-for-10-drum-axles/
@deadendgarage54012 жыл бұрын
Did you hook up the emergency brake and was it the stock cable?
@Slicpartna2 жыл бұрын
I did hook the emergency brake cable I changed it for the 13" drum (still stock) It was a longer Let me know if you have any more questions
@deadendgarage54012 жыл бұрын
@@Slicpartna mine for some reason was not long enough on the driverside but plenty on length on the passenger. Not wear to go fron here.
@Slicpartna2 жыл бұрын
@@deadendgarage5401 i used a emergency brake cable for a 13" drum for the drivers side If i remember correctly i ordered it from rock auto
@arniecann11333 жыл бұрын
Did u replace porportiong valve??
@Slicpartna3 жыл бұрын
Yes I did but it wasn't necessary All needed to do was move the lines around Let me know if you have any other questions
@jamesmahan33583 жыл бұрын
Nice brakes ! You do coil over ?
@Slicpartna3 жыл бұрын
Thanks for the compliment Na, no coil over I have a air suspension
@Yg556486 ай бұрын
What brand c notch is on your truck?
@Slicpartna6 ай бұрын
If I remember correctly, the c-notch is from ride tech Let me know if you have any other questions Thanks for watching
@EaEternalPain3 жыл бұрын
What kit was this? I'm going to rip my hair out dealing with the drums on my 96 k1500.
@Slicpartna3 жыл бұрын
Itz a kit from little shop mfg www.littleshopmfg.com/gm-88-00-k1500-rear-disc-brakes-6-lug-for-10-drum-axles/ Let me know if you have any other questions
@AndresLopez-kv8dt Жыл бұрын
Hi. Where can I order that kit.
@Slicpartna Жыл бұрын
Little shop mfg Let me know if you have any other questions Thanks for watching
@raymondtrevino63703 жыл бұрын
Where do you get the slot drill rotors and part numbers ?
@Slicpartna3 жыл бұрын
I ordered them rotors from summit racing for faster shipping, rockauto.com has them also Rotors are made by power stop Part#ar8253xpr Let me know if you have any other questions
@lipe13869 ай бұрын
Hello, sorry, where can I get this kit?
@Slicpartna9 ай бұрын
Hey hey whatz happening I got the kit from www.littleshopmfg.com Let me know if you have any other questions Thanks for watching
@lipe13868 ай бұрын
Thanks I will buy it and let you know if I have questions
@yamahar1castillo9233 жыл бұрын
Looks like you have a lot of experience on mechanic jobs ! Question ! My back up lights doesn't work at all ! Bulbs are good , wires are good ! Any idea ?
@Slicpartna3 жыл бұрын
Did you check the for 12 volts at the bulb socket when the back up lights are on? You can use a a test light but a volt meter would work best
@yamahar1castillo9233 жыл бұрын
@@Slicpartna my truck is a 1992 chevy cheyenne ! There is nothing ! I get nothing the lights never turn on! Directional lights work! brake lights work hazard lights work, but reverse lights do not
@Slicpartna3 жыл бұрын
@@yamahar1castillo923 ok do you have access to a wiring diagram?you will have to trace the wires out Did you check the reverse switch?
@yamahar1castillo9233 жыл бұрын
@@Slicpartna no i dont have acces to the wire diagram! I dont even know where is the back up switch ! So stupid i guess lol
@Slicpartna3 жыл бұрын
@@yamahar1castillo923I will help you out as best as I can I believe I might have a diagram that might be close It will be later today though
@edgarmata445 Жыл бұрын
Do your stock 15” rims fit fine with this rear disc kit?? 21:24
@Slicpartna Жыл бұрын
No issues with the stock rim fitting over the disk kit Let me know if you have any other questions
@jakedelp32193 жыл бұрын
Which kit did you get? The one for the 10” drums or 11”?
@Slicpartna3 жыл бұрын
I believe I got the kit for the 11" drums Be sure to measure the inside diameter of the drum to determine what size you have Let me know if you have any other questions
@orlandovasquez46392 жыл бұрын
What is the difference from the 10” and 11” drum? I have a 96 suburban that’s a 2wd 5.0 Vortec and 3.42 rear end.
@jamesmartinez1983 жыл бұрын
Are they 10” or 11 inch drums?
@Slicpartna3 жыл бұрын
If I remember correctly mine were 11" drums You can either measure across the drum or take it to the local auto parts store to match it up Let me know if you have any other questions
@crcz1962 жыл бұрын
Awesome vid, thank you!! I am thinking on buying the same kit, do you know what make and model are the rotors/break pads out of? I couldn't fint the part# and I am worried that maybe in the future the parts might be a little bit complicated to get Thanks in advance!!
@Slicpartna2 жыл бұрын
Thanks for the complement and thanks for watching The rotors are from a 94-96 Chevy Impala SS The bolt holes on the rotors will have to be drill out slightly 9/16 drill bit. The calipers are from 79-85 Cadillac Eldorado Let me know if you have any more questions
@andysgarage55373 жыл бұрын
Could you just have taken the four bolts out ?
@joelelizondo44453 жыл бұрын
How would he have pulled it off if the axle was still in?
@cathoschizolifter2 жыл бұрын
how do u connect the ebrake?
@Slicpartna2 жыл бұрын
I had to use a longer ebrake cable for a 13" drum setup The kit also includes cable stops just cut the excess cable off Let me know if you have any other questions
@louismaselli87843 жыл бұрын
Nice video,that dust cover is a bitch.Didn’t see how you put the caliper bracket on,does the cutout slide over the axle then the diff housing
@Slicpartna3 жыл бұрын
Hey the brackets slide over the axle tube then just orientate them to the mounting holes on the axle flange Let me know if you have any other questions
@ezequielrobles92863 жыл бұрын
Good job where you get the conversion kit?
@Slicpartna3 жыл бұрын
Thanks for the compliment, I really like how it turned out and the upgraded performance I got the kit from little shop mfg in Lawrenceburg TN www.littleshopmfg.com/
@ezequielrobles92863 жыл бұрын
Thank you for replying my message
@Slicpartna3 жыл бұрын
@@ezequielrobles9286 no worries
@TheMilvidas2 жыл бұрын
@@Slicpartna I've seen this shop online, and I've been wondering of the kit is reliable and are the brakes alot better than drum? I have a 1997 chevy suburban 2500 4x4 Wth a 454 so it's very heavy. It's very noticeable that I need more stopping power. Would tou recommend this kit?
@Slicpartna2 жыл бұрын
@@TheMilvidas there is improved braking with the conversion Also be mindful of the brake pads that you use... Different brake material has a different friction coefficient Let me know if you have any other questions
@originalman84973 жыл бұрын
Hey brother ? Were you able to use your 4L60e transmission out of your suburban for the LS swap
@Slicpartna3 жыл бұрын
Oh yea, no issues
@originalman84973 жыл бұрын
@@Slicpartna Thanks for your last response!! If you don’t mind I’m putting a 450 horsepower LS1 tuned! what size transmission stall should I put in?
@Slicpartna3 жыл бұрын
@@originalman8497 what cam are you running
@originalman84973 жыл бұрын
@@Slicpartna .591/.571 On the Lyft not sure what the duration is
@Slicpartna3 жыл бұрын
@@originalman8497 I'm running a 3k stall made by Circle D Now bare in mind not all stalls have the same characteristics, some will slip more than others and some are hot garbage I would suggest doing some research on the stall you plan on going with and get some reviews
@joewatt70062 жыл бұрын
please tell me you was joking about that rusty truck a show truck lmao
@Slicpartna2 жыл бұрын
Not a joke It is in the process now All the body mods have been completed, suspension mods completed, interior has been completed Im currently rebuilding the engine into a stroker When you see it at a show near you You will say well done Catch you on the B-side
@JohnSmith-qj4cf3 жыл бұрын
Could you give me a part number for air bags please
@Slicpartna3 жыл бұрын
Firestone F9000 thorbros.com/ Great retailer good prices
@JohnSmith-qj4cf3 жыл бұрын
@@Slicpartna thank you I have a rear dic brake diff going bigger front six piston caliber and four for the rear
@Slicpartna3 жыл бұрын
@@JohnSmith-qj4cf ok ok cool Sounds like it is going to be a nice setup
@JohnSmith-qj4cf3 жыл бұрын
Its all going in a 1950 ford bread van
@Slicpartna3 жыл бұрын
@@JohnSmith-qj4cf awesome
@WalkingTheNarrow2 жыл бұрын
how did you get the bracket on at this minute in the video? kzbin.info/www/bejne/hYSYaoGAi6etfcU
@Slicpartna2 жыл бұрын
The bracket isnt a complete circle, it slips around the axle Let me know if you have any other questions
@andysgarage55373 жыл бұрын
Oh wait the bearing is in the way 🥴🥴
@Slicpartna3 жыл бұрын
Na doc You either have to cut the back plate off or drain the differential, pull the axles Thanks for watching Let me know if you have any questions
@larryhouse45752 жыл бұрын
Disc
@Slicpartna2 жыл бұрын
Oh yea! Better braking I have upgraded to slotted and cross drilled rotors
@LoganTorres-j4s6 ай бұрын
Hooooooraaleeee.. VATO🤟🫡. I HAVE GT YUKON AND I ALWAYS WANTED TO PUT DISCK BREAK..HORA LE VATO COOL VIDEO 😊
@Slicpartna6 ай бұрын
thanks for watching let me know if you have any questions
@Chevro917 ай бұрын
Sik ride 👍🏻 I have a 99 Burn gettin some things done Do you got an IG Page
@Slicpartna7 ай бұрын
Thanks for the compliment Na no IG page Let me know if you have any questions Thanks for watching