hey guys I really appreciate your video, I'm doing a turbo on my 96 hatchback next month. you have the only video I've seen on you tube that actually shows every step by step part. Thank you so much I truly appreciate it have a good day
@jtmracing29867 жыл бұрын
No problem any questions just ask
@itsamechaniclifegarage39577 жыл бұрын
i can help too
@giovannicortez5027 жыл бұрын
JTM Racing hi I have a 05 Civic and I would like to if I can swap the old intake manifold for one from a d15b would it actually fit in my civic? That engine is similar to mine
@jtmracing29867 жыл бұрын
I mean you can it takes a lot of fab work and sometime I don't know if you would gain any power from it. Why do you want to do that swap ?
@davidsussens44787 жыл бұрын
Thank you very much for this step by step vid. It really does help anyone who is looking at turboing any sort of motor because I believe the basic principles will be transferable. Thanks again.
@jtmracing29867 жыл бұрын
David Sussens thanks a lot for the good feedback means a lot
@RodneycarrThe7 жыл бұрын
That fitting inside your oil pan is enormous
@jtmracing29867 жыл бұрын
rodney Carr lol yeah I know
@richardmahood64477 жыл бұрын
I've done a little research on vtec because mine is also not functioning properly. But anyway it uses oil pressure to push pins into place that activate the center wheel on the cam and earlier you said you had a little sludge in your motor it might be possible that your pins are stuck in place and not able to move when vtec is activated.
@TheLifeOfMartin7 жыл бұрын
cool video. I like how you explained everything, some things other people missed to explain. keep it up and update us!
@jtmracing29867 жыл бұрын
Red Panda Thanks man really appreciate it new videos coming soon
@TheLifeOfMartin7 жыл бұрын
just right now, my friend gave me his garrett off his saab 9-3 and intercooler. it has holes for water cooling. would I need to run that still or would I be able to cover it??
@jtmracing29867 жыл бұрын
Red Panda if your turbo doesn't have a coolant fitting yeah just cap or plug coolant lines on the intercooler you should be fine
@TheLifeOfMartin7 жыл бұрын
I have a d16 civic like yours. Just plug it? No harm done??
@jtmracing29867 жыл бұрын
Red Panda you should be good as long as that garret turbo doesn't require it
@BarbasLife7 жыл бұрын
great video!! I tried making one last year since no one really has a good one. your video is a perfect d.i.y. one.good luck with ur build.
@jtmracing29867 жыл бұрын
jdm G-baby thanks I really appreciate the good feedback
@WorldBoss897 жыл бұрын
I never did a Honda before but this is the most helpful video I seen so far ...👍👍👍👍👍.
@jtmracing29867 жыл бұрын
Thanks bro if you have any questions just ask
@MrJohnv83867 жыл бұрын
good job i hate to heckle you but that oil drain line shorten it up a half a inch or so to take that uprise out of it free flow down other than that for what you have awesome job man!!
@jtmracing29867 жыл бұрын
jonny v thanks yeah your right man I need to fix my drain line for better flow that's been the issue lately
@var45377 жыл бұрын
lol I saw the turbo cap and I was like he's going to forget it😂😂
@jtmracing29867 жыл бұрын
Varrohs I've done it multiple times lol
@mihailpetrovici50445 жыл бұрын
Me too😂😂😂😂😂
@gazcutloose72324 жыл бұрын
Same haha 😁 good effort tho
@brentleyjackson01423 жыл бұрын
Same
@TeeJayEJ2_g372 жыл бұрын
I don't want to sound stupid but I'm new to this stuff. I have a stock D15B7 in my 93 DX coupe and I'm aware that swapping to a B or K series is what many ppl do, but due to my budget what are some things I should do to Increase performance for my d15b7? Just trying to start somewhere
@jtmracing29862 жыл бұрын
Any bolt on mods like a intake, exhaust, etc. Maybe even boost her!
@4g54turbo18psi7 жыл бұрын
Ya wen I get the money imma go to bisimoto n order a d15b turbo cam new valves , springs titanium retainers low comp wisco piston with eagle rods I already have arp head studs a bigger turbo gonna get a gsr trans cuz once u make bout 600hp d series trans start breaking
@jtmracing29867 жыл бұрын
christopher baudoin good shit man u should do some vids on it
@blindabinda12347 жыл бұрын
92 d15b turbo civic I hope your gonna sleeve the block if your going for 600hp bro.
@nathantelles27327 жыл бұрын
That's a badass Manifold
@jtmracing29867 жыл бұрын
Nathan Telles thanks man
@NawfalHoosseny11 ай бұрын
Where did you get the manifold ?
@delsoldrizzy7492 Жыл бұрын
On the waste gate where do you put that ring when bolting it to the manifold
@ghostshot123497 жыл бұрын
this is an awesome vid man love how the turbo isnt hacked at all!
@jtmracing29867 жыл бұрын
ghostshot12349 thanks a lot for the good feedback
@danielbeavers87015 жыл бұрын
The best way to know if you're getting v tec. Is ride down the road in 2nd then let the tach slowly climb if it's working there will be a spot around 4.5 rpm that it will kick in you will know. You can be at 4.4 then when you hit 4.5 it will instantly feel like boost. Also most of the time in my experience if the vtec dont work. The tach want red line. It usley stops short.
@drue22837 жыл бұрын
The entire car is eBay as fuck! 😂 Reminds me of my first build,back in high school when I thought I was Paul Walker
@emersonwilson8723 жыл бұрын
A trick: watch series at Flixzone. I've been using it for watching all kinds of movies these days.
@reignmicah11193 жыл бұрын
@Emerson Wilson yea, been watching on flixzone for since november myself :D
@seansullivan70237 жыл бұрын
vtec solenoild is mechanically bad bro. if it activates and you have no performance response, the solenoid is sticking.
@jtmracing29867 жыл бұрын
Sean Sullivan thanks bro for the info
@Bama_Law6 жыл бұрын
Sean Sullivan very common if I've runs dirty oil or clogged. It's activated by oil pressure so if your pressure is low then no it won't work. Or sending unit
@johndemetriewalton9036 жыл бұрын
The oil pressure switch isn’t plugged in, that’s why vtec won’t engage
@CruddyDriveway3 жыл бұрын
the little raiders tool box 😭 thats fire
@brisevans89764 жыл бұрын
Any update on the car? did the motor blow? Also curious to know about any internal parts you may have upgraded before the turbo. for example, better pistons, arp studs, ect
@gavinschannel69464 жыл бұрын
@bris Evans reading through comments he said all internals are stock
@Stupreme.7 жыл бұрын
Diy Ebay turbos FTW 🙌🏻
@jtmracing29867 жыл бұрын
It's a Stu yessir lol
@MrJmak2237 жыл бұрын
Really nice build dude, are you planning on getting engine management and uprated injectors & fuel pump at some point? How much boost will the d15 hold without forged rods and pistons? Any clutch slip yet?
@jtmracing29867 жыл бұрын
MrJmak223 yeah that's my plan clutch is holding up fine I am running a stage 3 6 puck clutch though lol and I would say 8 psi would be the max you would wanna run so I'm gonna run probably 6 psi
@estebanmorris56366 жыл бұрын
Thank you for making this video it means a lot to me I just acquired a 98 Civic e x single overhead cam VTEC? But now I see that there's hope to make a go a lot faster
@dustinwilliams66215 жыл бұрын
Is the video laggy for anybody else? Other than that... great vid man thanks for the help
@jtmracing29867 жыл бұрын
I understand thats 2 different engines but what do u mean a d15b vtec is 210hp stock if it's boosted yeah but stock there about 135hp
@modfydgarage23127 жыл бұрын
Get rid of the boost controller. Stock waste gate should only put out 5-7psi. The boost controller usually cause leaks anyways from ebay. Look for leaks at the piping with soapy water. You need two step cooler spark plugs or you'll melt the factory plugs. You should get the car tuned asap. You'll need a management system. Injectors and fuel pump with aftermarket fuel regulator would be smart. An aftermarket boost guage would help to monitor over target boost. Do it right or be prepared to have a sitting car for a long time. GL
@jtmracing29867 жыл бұрын
Modfyd Inc thanks a lot for all the info really helps a lot
@jtmracing29867 жыл бұрын
Modfyd Inc what management system do you think would be best
@youngnboosted38477 жыл бұрын
JTM Racing go to phearable.net you can get a basemap for $250.
@jtmracing29867 жыл бұрын
Sevilai Vang thanks a lot for all the info really helps
@dubj91406 жыл бұрын
An engine mngmt/dyno tune are crucial for sure kinda goes without saying cause I'm pretty sure most people know that. All that other aftermarket fuel pump blah blah thats debatable
@cstone93647 жыл бұрын
about to do my 99 ex. d15b vtec obd2. wouldnt go above 8 lbs of boost on stock inters. i got a decent turbo kit off ebay speeddaddys!
@jacobanderson64374 жыл бұрын
lmao no such thing as a decent turbo on ebay
@AM-wi6zo4 жыл бұрын
@@jacobanderson6437 WRONG!!! I ran one for years with 0 problems.
@jacobanderson64374 жыл бұрын
A M yea and u drive like a 90 yr old nana?. Either that’s or ur just lucky. eBay turbos are made out of shit metal
@jessbrown75577 жыл бұрын
keep up the good work mate! need more updates on the civic
@jtmracing29867 жыл бұрын
Jess Brown a lot of people want some updates on the civic so they will be coming soon I promise
@possibleproblem4793 жыл бұрын
i know if i do this to my car it wont be very fast still. but it would be an awesome learning experience and a great first project.
@jtmracing29863 жыл бұрын
What kind of car would you be boosting?
@possibleproblem4793 жыл бұрын
@@jtmracing2986 little 95 civic lx. yeah yeah im boosting a 4 door.
@jtmracing29863 жыл бұрын
@@possibleproblem479 Mines a sedan as well do it bro!!!
@possibleproblem4793 жыл бұрын
@@jtmracing2986 for sure. lx badge will be the icing on the cake if i decide build out internals in the future.
@jtmracing29863 жыл бұрын
@@possibleproblem479 Hell yeah that's the beauty of it!
@johncholmes6436 жыл бұрын
It feels fast but it feels kinds slow. Every Honda LMAO
@alexr1019925 жыл бұрын
What about the tune? Who did you go with to flash the computer, or is there a program you used that works?
@jtmracing29865 жыл бұрын
All it has right now is a basemap from hamotorsports still needs a proper tune but actually runs pretty decent surprisingly but will get a legit tune hopefully soon
@Destiny-km5jj7 жыл бұрын
hi i have civic 1.8 vt 2007 model wanted to add turbo kit do you have any videos
@jtmracing29867 жыл бұрын
Hyder Ali sounds like fun unfortunately I do not have any videos on that exact model should be some what easy I would think
@Destiny-km5jj7 жыл бұрын
I wanted to install turbo kit where do you suggest to buy any sites do you suggest me
@jtmracing29867 жыл бұрын
Hyder Ali off the top of my head no but you can try eBay or just Google search your make model year with turbo kit there has to be info on it somewhere
@bodegadan20357 жыл бұрын
Can you send a link to the same exact turbo kit
@jtmracing29867 жыл бұрын
BodegaDan 203 I don't have a link it's from eBay the seller is speeddaddy if that helps
@cstone93647 жыл бұрын
what size turbo is it? thats sick i wanna do the same thing to my 99 ex d15b vtec.
@jtmracing29867 жыл бұрын
C Stone I'm running a 55 trim it's pretty big
@4g54turbo18psi7 жыл бұрын
C Stone jtm racing if u guys wanna see pix follow me on Instagram d15b_civic I've spent over 6k from wen I first bout it 2yrs ago I've done everything from starting to build my old d15b7 n blowing it to wat i have now
@jtmracing29867 жыл бұрын
christopher baudoin I definitely will
@sp3ct0r726 жыл бұрын
Can you send a parts list of all the required parts?
@jtmracing29866 жыл бұрын
SP3CT0R I will make a video going over what you need to boost your car
@sp3ct0r726 жыл бұрын
JTM Racing Ok 👍 will look out for it
@chrislabago54267 жыл бұрын
It's idling too high cause it's on limp mode due to CEL light is on if im not mistaken. There could be faulty sensors... p.s. how much did it cost for the whole kit?
@jtmracing29867 жыл бұрын
Chris Labago I also have a bad iacv I think that's what's causing it the car did this before I had a cel but my kit I pieced together it probably cost $1100 all together
@Bama_Law6 жыл бұрын
Why not cut the rest of the threads for the sandwich block?
@Chihabam26 жыл бұрын
I have to exact same car and was wondering which exact kit and brand you got for this car
@Klahndikebar7 жыл бұрын
That sandwich plate is meant to be loose so your filter will push it together. Mine was loose too. It doesn't leak
@jtmracing29867 жыл бұрын
Brendan Klahn which plate are you talking about exactly
@Klahndikebar7 жыл бұрын
The oil pan sandwich plate.
@jtmracing29867 жыл бұрын
Brendan Klahn the adapter that screws on first to put the sandwich plate on wouldn't let it sit flush against the block they have that issue with a lot of the ones off ebay
@Klahndikebar7 жыл бұрын
Yea mine got pushed on and sealed after I tightened after I put the filter on. It doesn't leak. I was just letting you know. Maybe yours is different but I had somewhat the same problem
@jtmracing29867 жыл бұрын
Brendan Klahn yeah thanks man I do appreciate the info just to let other people know if they have issues with theirs I'm pretty sure mine was just garbage quality lol
@wholesalewhale7 жыл бұрын
Do you have the right ecu? I had some problems with my d15b hitting vtec from bad ecus.
@jtmracing29867 жыл бұрын
Yeah I'm running the right ecu, it ran great for the longest time when I did the swap but now I can't figure out why it's throwing a code
@eddies2kturbo7 жыл бұрын
JTM Racing what ecu do you use, I have same motor 3 stage vtec
@jtmracing29867 жыл бұрын
eddies2kturbo I'm running a p06 flashed to a p28
@eddies2kturbo7 жыл бұрын
JTM Racing thanks
@jtmracing29867 жыл бұрын
eddies2kturbo no problem
@FernandoGonzalez-lw2wf7 жыл бұрын
How much u spend on kit a link if u have bro would appreciate it thanks And did u tune ecu??? Just wondering want to put a turbo but I need some pointers ??
@jtmracing29867 жыл бұрын
Fernando Gonzalez I pieced the turbo kit together so all the parts came from different sellers on eBay it probably cost me all together $900 I'm not tuned yet but will be soon
@danfuentes55007 жыл бұрын
JTM Racing loved the vid man where's the follow up tho? can't wait to see it tune and running right. vtec n all
@jtmracing29867 жыл бұрын
Dan Fuentes hopefully soon man video will be coming soon
@bseries88267 жыл бұрын
I want to see a video update please.
@jtmracing29867 жыл бұрын
Konichiwa B-series soon hopefully I will post some new videos with updates on the civic
@danielbeavers87014 жыл бұрын
Pour a little Sea foam in your oil and it will clean most of that sludge up. Then pour a little in your gas also. Sea foam does wounders for your engine.
@darylbabz54514 жыл бұрын
Bro is there any way you can put back the A/C? with the turbo is there a way? What to do
@jtmracing29864 жыл бұрын
You cant run AC with this kit you would need a totally different kit.
@michaelbazi67057 жыл бұрын
Can u plz give me more info about the turbo?
@jtmracing29867 жыл бұрын
Michael Bazi what do u need to know man?
@michaelbazi67057 жыл бұрын
What the turbo is called and if you had a link from where you bought it
@jtmracing29867 жыл бұрын
Michael Bazi I don't have a link because I bought it off ebay but the seller was speeddaddy if that helps and the turbo is a t3/04e turbo 55trim your gonna run into all kinds of different turbo setups pick what works best for you I my experience your always gonna have to do sort of modifications to the kit they never fit perfect mostly eBay even some high end brands as well
@michaelbazi67057 жыл бұрын
JTM Racing i got the same engine as u the d15b on my eg4 and i wanna turbo it this video help me out alot and thanks for all the information :)
@jtmracing29867 жыл бұрын
Michael Bazi no problem man just remember when you run the drain line into the pan make sure the line flows downwards in to the pan no weird angles or kinks needs to free flow because it's gravity fed or you will get oil backing up into the turbo and that's no fun lol
@leepeezy4 жыл бұрын
Good video but 120 lbs on the pan bolts seams a little high doesn't it?
@pierresandoval42377 жыл бұрын
If your speedo senser isnt working then your vtec wont engage so if your speedometer isnt working, try replacing that, my vtec wasnt working cuz of that reason so hopefully that helps
@jtmracing29867 жыл бұрын
thanks man for the info i figured it out though i had a short in my vtec pressure switch wiring harness jump the ecu and vtec kicked right in at 4800 rpms
@shane86lxi437 жыл бұрын
no oil resistor in the turbo or is that fitting the oil resistant
@jtmracing29867 жыл бұрын
b.p salvage/Busy B customs no oil resistor at all haven't had any problems though so I'm not gonna run one
@michaelbazi67057 жыл бұрын
What the turbo is called and if you had a link from where you bought it
@powersircleperformance65706 жыл бұрын
Where did you buy that turbo kit? Can you send me the link ?
@bansimbolism2457 жыл бұрын
Not sure if you said it or not, but did you rebuild the engine for the turbo?
@jtmracing29867 жыл бұрын
Bansimbolism no sure stock jdm block
@FroztiProductions6 жыл бұрын
So you're putting a turbo on with worn oil rings? Was considering a turbo until I noticed my rings are a bit worn. Only smokes when I get on it hard but I blow oil into the intake. I have a y8
@jtmracing29866 жыл бұрын
FroztiProductions yeah I'm not to worried about it if the engine blows up it blows up lol I will just build a badass sohc with stronger internals
@FroztiProductions6 жыл бұрын
JTM Racing That's my plan, too! Once the garage is cleared I'll pick one up. Do you plan on doing a build video?
@jtmracing29866 жыл бұрын
FroztiProductions definitely will do a build video
@rickleece62208 жыл бұрын
dude great video! I'm excited to see that thing run! pretty cool how you fabricated the different parts that didn't fit. any plans to wrap some of that exhaust piping to keep temps down?
@jtmracing29868 жыл бұрын
Thank you man yeah I will probably wrap the manifold and get a turbo blanket but I'm going to put a fuel pump next and some 450cc injectors with a tune
@rickleece62208 жыл бұрын
Smart man. Any plans for methonal? Or e85?
@jtmracing29868 жыл бұрын
Not really yet but will see will be running 5-8 psi then do a full build internal and turn up the boost
@rickleece62208 жыл бұрын
Do they sell e85 around you?
@jtmracing29868 жыл бұрын
Yeah they have a couple gas stations here and there with e85
@joeyangeles55303 жыл бұрын
Cool video,I was wondering what distributor are you using on that D15B ?
@jtmracing29863 жыл бұрын
Thx!!! I'm just running the stock d15b distributor
@williamking92004 жыл бұрын
Loose bov, that's going to cause a major boost leak. I'd buy a different flange preferably with a c clip to hold it on tight. That entire intake pipe and bov releases preasure from the intake so if its loose and leaking air you won't be able to build up boost.
@ybjarod40205 жыл бұрын
Can you tell me every part that I’m gonna need?
@vomdeich10117 жыл бұрын
Does Honda Bond also fit my Subaru? Seems to be pretty specific goop...
@shahrulnizam47135 жыл бұрын
Did you change the internals and retune the ecu? I suddenly wanted to boost my D15 EK after watching your video lol
@jtmracing29865 жыл бұрын
no it has all stock internals im only gonna run 5-8 psi and I still need to get a tune
@KeepoHdee7 жыл бұрын
That return line working for you? always been told it has to go straight down
@jtmracing29867 жыл бұрын
Keepo Hdee No I'm having some issues with it but my turbo sits real low
@KeepoHdee7 жыл бұрын
JTM Racing yea I figured is oil backing up into ur turbo? Gonna turbo my eg soon after this week although its only a d15b7
@jtmracing29867 жыл бұрын
Keepo Hdee yeah it's leaking outta the intake side
@NateDaGreat8087 жыл бұрын
"Getting it done right" with the eBay parts lol classic
@James-no7xb6 жыл бұрын
What do u hook boost control to on other side
@brizzle4116 Жыл бұрын
Don’t you have to get it tuned? Or no
@jtmracing2986 Жыл бұрын
Yeah you definitely need a tune or you can have engine failure!
@brizzle4116 Жыл бұрын
@@jtmracing2986 how much would tuning for this typically cost at a shop?
@jtmracing2986 Жыл бұрын
@@brizzle4116 Just depends
@bigz18667 жыл бұрын
Hey man can I just upgrade my injectors Because I'm just gonna be running 5 psi???
@jtmracing29867 жыл бұрын
JuiciestLizardPlayz yes i would atleast upgrade to some rdx injectors they are cheaper then aftermarket injectors your gonna need aftermarket top hats for them and you can get it all on eBay for under $200 cheapest way to go in my opinion
@bigz18667 жыл бұрын
JTM Racing ok cool and how do I make my turbo run at 5 psi just rely on a watergate spring or a boost controlller
@jtmracing29867 жыл бұрын
JuiciestLizardPlayz either way boost controller is nice becuz it's adjustable but you can only go as high as your spring is rated
@bigz18667 жыл бұрын
JTM Racing ok cool thanks!!
@jtmracing29867 жыл бұрын
JuiciestLizardPlayz after you do that I would get a tune to make sure everything is running right and your getting the right amount of fuel
@angelogotrice7 жыл бұрын
Good job man I'm glad to see some of us stick with the single slammers I have a d15b7 I want to put a Greddy turbo kit on so I can keep my ac n power steering and eventually get some Brian crower rods n make it nice n scrong lol
@jtmracing29867 жыл бұрын
angelogotrice thanks man definitely save the sohc lol if you do that build would love to see some video footage I'm all about the dseries
@angelogotrice7 жыл бұрын
Most def will I truly fell in love when I was trying to blow mine up just to put in a dohc but I was beating the b18 integras with wrapped dc sports ceram coated 4-2-1 headers and exhaust thicker wires a short ram intake with a truck air filter on the tip and royal purple in the trans and engine I was loving it from then on
@James-no7xb6 жыл бұрын
I'm in middle of puttin my on what will happen if I run it with out run on low psi
@pascualzapata21264 жыл бұрын
where did you buy that turbo kit ?
@d.j.99617 жыл бұрын
If u drill the. oil pan up high, it would reason that u would be sacking air instead of oil.i would drill it down lower so it would be submerged in oil.
@jtmracing29867 жыл бұрын
D.j. B if you drill under the oil line oil will back up into the turbo you want it free flowing into the pan
@101whoisthis7 жыл бұрын
Loved your video! I'm trying to get visuals of what I need to do as well. So far I picked up t4 turbo and manifold together for 100 bucks with no shaft play 10k miles on it. How many days did it take you? I plan on taking a week off work so I can have time
@jtmracing29867 жыл бұрын
Jeremy Dunn you could definitely do a turbo setup like this in a week just takes some time to line everything up for the first time I could make u a list of parts if that helps
@101whoisthis7 жыл бұрын
JTM Racing yes please that would help a lot
@jtmracing29867 жыл бұрын
Jeremy Dunn List: wastegate bov (not necessary) vacuum line oil feed line oil drain line boost controller (not necessary) downpipe dump pipe intercooler intercooler piping hose clamps oil pan brass fitting brass fittings for turbo fuel pump injectors tune that should be most of it watch my video of me installing the turbo kit
@lilskeet6066 жыл бұрын
I want that raiders tool box.
@jtmracing29866 жыл бұрын
Lil Skeet walgreens lol
@lilskeet6066 жыл бұрын
@@jtmracing2986 lol I live on the east coast so whenever you find cool shit like that. They have it in Steelers and sum other shit teams. Sure I can find that bad boy on Amazon and get one for me my pops and brothers. Lol thanks brother
@MrAlex42217 жыл бұрын
whats the link to the eBay turbo kit? ?
@jtmracing29867 жыл бұрын
alex macias I don't have a link for it but the seller is speeddaddy if that helps and I peiced everything together so the intercooler and piping was all separate and a couple other misc. things came separate as well
@Stupreme.7 жыл бұрын
Not to hijack your vid. But I have a full list of turbo parts on my vids, it's for an ep3 k20a2. But you just need to change the turbo and manifold to your spec.
@johnnygoodwill4077 жыл бұрын
What socket / ratchet set is that?
@jtmracing29867 жыл бұрын
Will Caver it's the craftsman hollow set don't know what they're exactly called but everything is hollow ratchets extensions sockets it's a pretty handy set
@johnnygoodwill4077 жыл бұрын
JTM Racing thanks. it's nice, I want one.
@jtmracing29867 жыл бұрын
Will Caver hit up Sears dude
@MichaelSmith-ww7km7 жыл бұрын
By the sound of it do you live in Gastonia NC? I think you tried to race me but it was wet out lol
@jtmracing29867 жыл бұрын
Michael Smith na man I live in phx az lol
@MichaelSmith-ww7km7 жыл бұрын
Ah shit nvm lol, there’s a guy here and yalls cars look similar
@jtmracing29867 жыл бұрын
Michael Smith it's all good man lol gotta watch out for those 4 door eg's I'm telling ya lol
@4g54turbo18psi7 жыл бұрын
Yup pretty much but it's a loud sleeper 2.5 inch exhaust from the turbo back
@jtmracing29867 жыл бұрын
christopher baudoin yeah mine's pretty loud to 2.5 inch cutback and I took all the sound deadner out of the muffler lol
@daniel0morgan7 жыл бұрын
Liked the video enough to give you a 1000th subscriber
@jtmracing29867 жыл бұрын
Daniel Haas thanks man
@daniel0morgan7 жыл бұрын
not a problem ive got a 91 hatch that ive been working on for 2 &1/2 years and i just appreciate the progress your making keep up the good work man i do have some questions though if you get a chance theres a antilag item thats rather cheap and im kinda hesitant on buying it was wondering what you thought
@jtmracing29867 жыл бұрын
Daniel Haas what is it exactly do u have a link you can post
@daniel0morgan7 жыл бұрын
its called a WOT Box and its by n2mb you can check it out here at there website: www.n2mb.com
@jtmracing29867 жыл бұрын
Daniel Haas I mean it seems pretty legit the only time I've heard of no lift shift was when the cobalt ss turbo came out so I'm curious how that works on a transmission not designed for it but shit why not try it but if your wanting the 2 step feature you can get that tuned on your ecu
@mihailpetrovici50444 жыл бұрын
How did the manifold held on the long run?
@jtmracing29864 жыл бұрын
I really haven't had any problems with it a lot of people say the welds break but mine has held pretty good so far
@charactername78953 жыл бұрын
9:55 where going this line?
@Onelovej4 жыл бұрын
Looks pretty good how is that eBay manifold holding up?
@CalvinDyals7 жыл бұрын
you do not need a high performance fuel pump. factory fuel pump will push 440cc injectors just fine. my d15b on 12psi made 231 whp with stock fuel pump and a great tune
@jtmracing29867 жыл бұрын
Calvin Dyals no shit handles it just fine huh
@CalvinDyals7 жыл бұрын
JTM Racing yes. all i did was just injectors and a shit ton of tuning for my turbo set up.
@jtmracing29867 жыл бұрын
Calvin Dyals good shit man how much did the tune run you
@Mustlehard7 жыл бұрын
how could they make these kits specifically for these cars and then have stuff not fit
@jtmracing29867 жыл бұрын
Mustlehard right I agree but that's how it goes when you go cheap
@dayx21037 жыл бұрын
i have a d15 with a d16 head, is that good??lmk kind of a noob to engine swaps
@jtmracing29867 жыл бұрын
PapaHurt 605 do u know what d15 block your running and what kind of d16 head vtec or non vtec
@dayx21037 жыл бұрын
JTM Racing its a d15 B block and a d 16 Y
@jtmracing29867 жыл бұрын
PapaHurt 605 d16y what is it vtec
@dayx21037 жыл бұрын
JTM Racing yeah its vtec
@jtmracing29867 жыл бұрын
That's not a bad setup what are your future plans for the engine and what kind of Honda is it in.
@jovansanchez99254 жыл бұрын
Where does the s.r.p box go
@Rrrakanishu7 жыл бұрын
PB Blaster works so much better than wd40, keroil works good too!
@jtmracing29867 жыл бұрын
Chris Hill yeah my buddy Carlos uses PB blaster it works pretty damn good
@HopOFFmyGlock7 жыл бұрын
Not sure if my cars running right so I'm going to throw a turbo on to fix it.
@1188clean7 жыл бұрын
Jakob Ruffinen nice way to complicate/hide your problem. good luck
@Clovistered4 жыл бұрын
Have long have you been a mechanic for
@jtmracing29864 жыл бұрын
Wouldn't say im a mechanic or anything, but I've been working on cars for over 15 years easily.
@errolanthonyrespicio94204 жыл бұрын
Bro is that all stock internals? Can you send me details? Im planning to build same engine
@jtmracing29864 жыл бұрын
Yeah it's a completely stock jdm d15b vtec what do you need to know
@errolanthonyrespicio94204 жыл бұрын
@@jtmracing2986 i need your input about the internals. I got d15b straight po8 internals 20 camlobes. Should i get vitara pistons and rods?
@jtmracing29864 жыл бұрын
@@errolanthonyrespicio9420 If you wanna run high boost I would, anything over 8 psi I would run better internals and the vitara internals are really solid and handle quite a bit of boost you should beable to make 300hp easy depending on tune.
@89hybrid887 жыл бұрын
Wow down pipe is low. What kit is that ?
@jtmracing29867 жыл бұрын
Stacy Pfingsten just an eBay kit from a seller called speeddaddy I pieced everything together though
@glenbinversie91647 жыл бұрын
Can try starting my motor without the air violent hooked up or will it damage something
@jtmracing29867 жыл бұрын
Glen Binversie I'm not sure what you mean
@glenbinversie91647 жыл бұрын
The pipes for the air cooler I'm nt going to hook them up til I start my motor or will that nt work I dnt want to damage something
@jtmracing29867 жыл бұрын
Glen Binversie no that won't hurt nothing just no boost
@glenbinversie91647 жыл бұрын
Joshua McDaniel I just want to make sure it starts and stays running the first time it started then it would die on me I'm hoping it was the fuel regulator I got a better one but ya it starts then dies then wnt start again
@jtmracing29867 жыл бұрын
Glen Binversie should fire right up as long all your oil lines are good don't want oil everywhere lol
@mzdrea48007 жыл бұрын
Any updates on the civic and thanks for the vid
@jtmracing29867 жыл бұрын
Andrea A will be posting some real soon
@eliasshadow56436 жыл бұрын
Never happend lol
@blindabinda12347 жыл бұрын
Good move on not going with the sandwich oil fillet piece. A friend of mine bought a cheap kit from ebay and the brass thing in the middle loosened up and his oil filter came off. Luckily he shut it off before it blew up.
@jtmracing29867 жыл бұрын
blindabinda123 I agree man I'm happy with the route I went with
@blindabinda12347 жыл бұрын
JTM Racing yea that's the best way if you ask me. Did you have to reduce the oil pressure going to the turbo? I know a lot of times if it's getting more than 30 psi the oil will blow by into the housings
@jerryyang18626 жыл бұрын
Hey nice video. How is your car currently running? I know turbo stresses the engine but how is your engine holding so far? I have a jdm d15b too and am considering to turbo it as well. I wanna get as much information as possible before i get on it. Please let me know! Thanks.
@jtmracing29866 жыл бұрын
Jerry Yang Yeah there's definitely a lot of info to know lol. The car is running great though just needs a few more upgrades and tune to be safe to drive. Upgrades meaning aftermarket fuel pump, injectors, and a basemap at least. What do you need to know exactly ? More than happy to help with any questions.
@jerryyang18626 жыл бұрын
JTM Racing im just wondering bc im afraid that my engine wont hold all that stress especially on stock internals. Thats all. Im planning to take it to my tuner once the kit is installed. My engine is fairly new so i think it should be fine if you say so.
@jtmracing29866 жыл бұрын
Jerry Yang I mean of course upgraded internals are a lot safer and a lot stronger than stock pistons and rods but it should hold up for quite a while. It also depends on how you drive your car and how much boost your running I would run 8 psi max.
@jerryyang18626 жыл бұрын
JTM Racing so i heard people say that you should drill the hole to the lower part of oil pan, but saw you drill it on the upper part. Can you tell me which one is the proper area to make the hole?
@jtmracing29866 жыл бұрын
Jerry Yang I would go in the middle of the pan you wanna be right above oil level I did drill to high and I had oil backing up into the turbo because it wasn't draining properly
@Brock_Landers6 жыл бұрын
I can't believe that the downpipe even remotely fit. I have never had good luck with those eBay downpipes. It doesn't exactly line up with the cat-back, but it's pretty damn close. Yeah, it's low, but it fits decently. Mine would always hit the oil pan.
@jtmracing29866 жыл бұрын
yeah its a close fit surprisingly but its about 3 inches to low so i need to chop it and reweld it to fit
@aboudimejri65636 жыл бұрын
After turbo turbo does a car need to be programmed??
@jtmracing29866 жыл бұрын
Aboudi Mejri yeah definitely need to get a tune and depending how much fuel you need might need to upgrade fuel pump and injectors
@aboudimejri65636 жыл бұрын
JTM Racing Thank you so much . The best name Turbo does not hurt a car and gives it extra power
@jtmracing29866 жыл бұрын
Aboudi Mejri it can hurt your engine if you don't have the right setup and you run to much boost
@aboudimejri65636 жыл бұрын
The weight of the car affects the turbo. If I'm carrying heavy objects in a car ??
@mars29756 жыл бұрын
Can be your vtec not working if you have a stock cat that’s clogged.
@armdrop1oh1776 жыл бұрын
i can't wait to see a vid of it ripping.
@jtmracing29866 жыл бұрын
yeah should be pretty sick but i think im gonna have to do a rebuild i tried starting it the other day and it sounded like it had no compression at all
@armdrop1oh1776 жыл бұрын
@@jtmracing2986 vitara build make some good power.
@jtmracing29866 жыл бұрын
@@armdrop1oh177 thats what i was thinking myself
@danielvargason70065 жыл бұрын
when are you going to run it
@backinz7 жыл бұрын
How do you learn how to do all this 😩
@jtmracing29867 жыл бұрын
Michael Jackson just a lot of research and I've been working on cars since I was a kid never did any schooling just learned over time
@backinz7 жыл бұрын
JTM Racing damn I wish I experienced that growing up, I love cars I would love to know everything about them and stuff . Thanks for the reply 👍🏾
@jtmracing29867 жыл бұрын
Michael Jackson of course if you ever have any questions just let me know
@shane970757 жыл бұрын
What's your motors status if you will? Mileage? All stock ? Sorry if you said it in the video and I just didn't catch on.. Very helpful vid btw
@jtmracing29867 жыл бұрын
Reckless Duner All stock internal motor probably has around 90k on it because it was idk swap
@richierichtv69345 жыл бұрын
did you build that engine for boost??
@jtmracing29865 жыл бұрын
No all stock internals im only running 8 psi max
@cjacepcion60147 жыл бұрын
you sounded like Chris fix. is that you?
@jtmracing29867 жыл бұрын
Cj Acepcion na I'm a new guy lol Chris fix is a really awesome channel though
@PeterArmour7 жыл бұрын
29:00 dude you started it with the cap on the cold side of the turbo haha
@jtmracing29867 жыл бұрын
Peter Armour I know right definitely felt stupid lol but it happens
@mattwilson47437 жыл бұрын
Lol I called that shit from the beginning when I saw that 😭💀
@alessandrobergamini19115 жыл бұрын
how many hp have that engine stock?
@jtmracing29865 жыл бұрын
Well it's not tuned yet but after should have somewhere around 200hp hopefully