93 Ranger Flowmaster Exhaust (SOUNDS LIKE V8)

1993 Ford Ranger 3.0L 2WD 5 speed
Has exhaust listed in description.
Cragar 15x8 wheels with -19mm offset, 255/60R15 Firehawks
Custom made shift boot and knob.

[@trevnthetractorguy4259]

at idle i wont disagree it does sound like a V8 haha

[@richardotero2376]

Dang if it dont sound purdy. I got a 94, was wanting to delete cat. Mine i feed all rhe snake oil i can get. Ranger 1 reports very well for a 94 w almost 200, no oil leaks.

[@AFXGaming]

Sounds like a v6 not at all like a v8, but a damn good sounding v6 none the less

[@naterader305]

Sounds like a mustang gt

[@floridaheat305]

Sounds like the jeeps 4.0

[@KsKaylor]

Love the sound, nice work man.

[@Schnozwangler]

Goto love those buttery smooth midwest roads

[@tylerfabish5578]

You must believe me when i say I am strengthening my skill set in my career and saving money so i can get the hell out to arizona or somewhere warmer and dryer.

[@DanielRodriguez-oy6mz]

Not in Chicago 😭

[@SnoopEastwood]

lmao

[@SnoopEastwood]

@@tylerfabish5578 Arizona is the place to go for sure

[@colton7373]

@@tylerfabish5578 central Texas

[@Patrick-393]

congrats on the truck. I'm Brazilian from the state of Rio Grande do Sul. here there is a lot of creaking of this model.

[@sandarkovic9575]

love that cruising sound

[@havens3345]

Sounds like a badass V8 on idle, and a Cummins climbing the rpms. I love the way this thing sounds tho. I've always wanted to do this to a v6 to trick people when I first start it up.

[@fish_R_stinky69]

Some v6 engines make a LOT more than a v8.

[@richardotero2376]

Pop the hood,tell people its a v8. 8 plug wires? Only a 4. W 8 plugs. I surprise a few so called mech. Who never seen the 2.3 v8

[@danielruiz6355]

I have a 2.9 1989 and the sound is just amazing i love it!

[@mattleonard5268]

I cut the muffler off my 88 2.9 5 speed and it had the stock cats with stock pipe but no muffler or tailpipe and it sounded amazing! Euphoric.

[@hankwalkerofficial]

same here. I need to know this exhaust setup so I can achieve a similar sound.

[@JoseLopez-lk1br]

NICE SOUND 🔥🏁

[@dougcampbell5149]

That really sounds good.

[@brandonbuck1696]

Yea that sounds so much better than most small engines

[@mattleonard5268]

I love it. I love v6s that sound like that.

[@2193agus]

Nice truck bro and nice sound

[@alonsogarcia1990]

Sounds great man!

[@samd7476]

Sounds amazing. This makes me wanna get one.

[@richardotero2376]

Why would u want a efing ranger? Are you kidding me? Its a mustang/truck. They are a blast, and cheap. I love a little 5 speed, fishing truck.

[@samd7476]

@@richardotero2376 Because I fucking feel like it.

[@jamesprice2163]

Do it their cheap and a blast and a half lol even wrenching on my broken down one is fun since it's super simple be warned though if you need a clutch fan either search a junkyard or just throw electric fans on it cause no parts store I've found in three county's carries one

[@brandoncollins6366]

I had a 1992 3.0 it had a Cherry Bomb then I just deleted all everything. Much better sound then before! Lol Your truck sounds awesome!

[@tylerfabish5578]

Muffler part number: 9425472 I got mine on amazon for 90 bucks. Also, I am no longer replying to comments asking how the exhaust is set up. If you can't read the slide at the start of the video, you are beyond helping. Cheers!

[@tylerfabish5578]

www.amazon.com/Flowmaster-9425472-Super-Muffler-Aggressive/dp/B001UJB7MK

[@Jeremy_Hill_2020]

I have a '99 Ranger 3.0 & want to do the Mustang 3.8 headers (with an adapter, JBA headers are extremely hard to find), delete both cats & have a X pipe in its place, 2.5" piping all the way, & a Flowmaster Super 10 with a side exit 3" tip or if I had the money, I would yank out the Explorer 5.0 & put it in my ranger

[@MIckveli2]

sounds awesome !

[@fish_R_stinky69]

Sounds sick man!

[@jaredalexander3403]

Sounds good

[@Cleary_22]

How’s the hanger setup for it? Mine ended up being rusted out so did yours come with a hook on top to put it on the hanger from the cab

[@coyote102076]

Probly the best sounding 3.0 I have heard on You Tube. There is just something about those 3.0's that have a very unique sound that no other truck has. The 4.2L in the F150's sound very similar. The 2 4.0L's I had in my explorers I just never could get them to sound...…………….right. Like, I don't know, they all just sounded...……….wrong somehow. Everyone talks about shorty shifters, and here you went and made yours TALLER! hahahaha! Hey, I dig it! I had a extended shifter in my 'ol 1989 International Eagle. (I don't drive big trucks anymore) always thought they were col myself. lol Great vid.

[@tylerfabish5578]

Thats a custom made shifter. I probably spent too much money doing it, i think im in over a hundred bucks just in parts making that shifter

[@coyote102076]

@@tylerfabish5578 totally worth it! Heck that's less than the price of one tire, and will last much longer. hahahaha!

[@danielsmith4090]

My 4.2 is just cut off under the cab and everyone is fooled.

[@jamesprice2163]

Everyone wants the shorty shifters for "speed shifting" but of your not drag racing it then it's not really important I know for mine I want a Hurst speedball shifter just for the classic muscle look

[@dannygallagher9290]

Sounds nice

[@ivanbliminse5350]

my 94 3.0 has an exhaust split right where the downpipe meets the exhaust system from the engine back. So I sound slightly better than a Honda civic. this sounds great

[@RBLUS_TY]

I got a Ford 300 4.9 that I wish sounded this good.

[@boodootoobie4954]

Dude you can make the 300 sound wicked with a Good Header, X pipe running into A flowmaster 40 series or a Thrush Welded dual out to the sides with tips

[@AICS-Vizion]

Sounds mean 💪💪

[@drfeastmf]

Sounds like a v8 sort of at idle, but as soon as the rpm climbs you can tell it's a v6

[@JuanLopez-rn5ci]

A sí le pondré un silenciador a mi Ranger 4.0 suena muy bien la Ranger del vídeo. 👌

[@greenman7yyy]

I'm impressed, driving one handed at the optimal 12:00 position, while shifting!! 👍👍👍

[@tylerfabish5578]

Some of us are actually cool

[@greenman7yyy]

@@tylerfabish5578 It is preferred method for increased control and safety ..). Great job mate!!

[@joshuaallender2986]

Honestly sounds like a beefy v6 and that is enough for this lol I love it!

[@tylerfabish5578]

yeah its awesome in person

[@joshuaallender2986]

Tyler Fabish you gotta link to this exhaust?

[@tylerfabish5578]

@@joshuaallender2986 bro its in the description. You need a flowmaster muffler, single in double out. You need an exhaust shop to remove the cats and fab up the rest of the piping. Thats all there is to it

[@silkygt.v.6797]

@@tylerfabish5578 do you have to take off the converter

[@tylerfabish5578]

@@silkygt.v.6797 yes, if you don't its not gonna sound like the video. Some shops won't cut off catalytic converters. So you may have to do it yourself and drive there. I would have a friend who is experienced working on cars handle that. If you have a 1995 or older ranger (like me, mine is 93) you won't get a check engine light.

[@OscarHernandez-il8tv]

What’s your setup trying to make mine just like this

[@dad3562]

Holy cow what muffler did you use? Did you use 3 inch exhaust?

[@Roofer101]

Can you please message me for a few questions I have about this transfer to the flow master? Is this a job you did at home ? Sounds great! I want to delete the Catalytic converter on mine because I think it may be clogged,

[@captainnug_6031]

@tylerfabish5578 got any links for the exhaust setup, like is there any kits i can buy on ebay or something? Appreciate if you can respond, tryna do this with my 92 3.0 v6 ford ranger.

[@warrenstephens3705]

Sounds like a 6v71 Jimmy I used to drive.

[@joshuaallender2986]

Ouh I like this

[@spacenerd2782]

Thinking of doing this to mine it’s a 2001 was wondering how the pipe is routed and about how much it costed

[@jarbis6515]

what escape did you add

[@577buttfan]

It does sound like a V8 it even sounds like it has a slight cam in it only idle when you went through the RPMs a bit I could hear the V6 sound that's funny

[@dylanacker5693]

How did you do the cat delete?

[@5metalacid1]

I think the 3.0 Vulcans are actually great sounding V6’s, which is rare to me. I don’t think they need to try and sound like a V8 to sound good. But your setup sounds especially good on this truck.

[@tylerfabish5578]

Thanks brother

[@captainnug_6031]

​@@tylerfabish5578 got any links for the exhaust setup, like is there any kits i can buy on ebay or something? Appreciate if you can respond, tryna do this with my 92 3.0 v6 ford ranger

[@jamesprice2163]

Mine sounds rough but with a tune up I'm sure it'll clear up I love the sound of the engine but I just wish I could get it to stop fuckin tapping (I have no idea if it's lifters or anything but she has fresh oil and it's not low so probably lifters or valve tap)

[@spazzin9004]

@@jamesprice2163could be an exhaust leak from the manifolds or check ur egr pipe i had a knocking noise it quieted down when it was warm tho might not be your case or it could. Also check ur sparkplugs and wires.

[@tylerfabish5578]

​@@captainnug_6031go to muffler shop. Have them remove the cats and put in a flowmaster muffler with the side pipes. They weld all this stuff up. They put the chrome tips on. Although id say it sounded better when i had them change it to axle dumps later in the future. I have other videos of that as well

[@stevenwynboom1700]

Sounds like a 1/2 v8 honestly 😉 thinking about doing it to my 97

[@filletmignon5221]

That sounds better than my 5.3 vortex with dual cat backs

[@stevenwynboom1700]

@@filletmignon5221 😂🤣😆😂🤣😆

[@braydonsalata2438]

Did you gut the cats? Sounds like you did

[@capnangus8769]

Can't find it in the comments but what size of pipe are you running. What size before and what size after the muffler.

[@tylerfabish5578]

Just have your exhaust shop figure it out. Order the part number in the top comment, and whatever size that is is what i got

[@unknowngamer714]

random question gas gage broke and its stuck at full anyone good recommendations

[@kyronroberts7319]

Does it have the 3.0, or 4.0? I’m not a big ranger guy so I don’t really know.

[@tylerfabish5578]

3 liter

[@blakehuffman176]

What’s the exhaust set up

[@chrissagredo7129]

Wonder if the sound would be as good with the cats on. What diameter pipe do you have after the muffler? I’m gonna keep mine all stock and just change the muffler and duals outta there

[@TheChrismaster619]

Good question, I can not remove the converters, I live in Cali but I will buy the muffler anyway

[@jaredalexander3403]

@@TheChrismaster619 there's ways to gut cats in cali an pass smog im doing it rn

[@NoSocialStatus]

@@jaredalexander3403 how? I need this asap!

[@jaredalexander3403]

@@NoSocialStatus you need to buy a spark plug defouler about 7 to 15 bucks at a auto store an use it to raise the down stream o2 up out of the main stream so it reads different an doesn’t set a code

[@afitz6389]

Kudos to this Danger Ranger, sometimes a 6 is enough...like now😂

[@MultiPablo1987]

What's the tire size it looks nice.

[@johnleu3217]

What size pipe?

[@CHEVROMAX]

Has some have this sound in a Toyota V6 3.0 ever? i´d like to sounds like your V6 ranger.

[@StevenHD2]

What wheels and tires you got on it they are clean

[@tylerfabish5578]

15x8 cragars with 255mm wide firestone firehawks

[@karlieweddle8333]

Wow almost sounds like my K1500

[@tweakerrrrr]

can you please tell me what exact flow master muffler you have installed?

[@tylerfabish5578]

Read the top comment

[@InternalCombustionGarage-pg7ro]

Doesn’t sound like a V8 but it’s damn near the best sounding V6 out there

[@AY-fc7og]

What is the muffler

[@tinosands5775]

Where did you get the rims and center caps?

[@tylerfabish5578]

Cragar D-Windows, you can find them online. I believe it had a -19mm offset and 7 inches wide? No wheel spacers. This is all from memory

[@CaptainRew]

flowmaster makes like 20 different mufflers. which one is this???!!

[@stevemelidis6072]

If you want an even deeper sound go with a Flowmaster DBX muffler or hp2 muffler

[@jamesprice2163]

Absolutely beautiful truck I just bought mine yesterday but I was curious what wheels those are (btw awesome shifter)

[@tylerfabish5578]

Cragar D windows with a lot of negative offset. I think 15x8 size. Shifter is completely custom made

[@darklord-lg2rg]

You can get the pistol grip knob from advance auto. It's not custom.

[@tylerfabish5578]

@@darklord-lg2rg custom made. Hurst pistol grip bought from hurst. It isnt possible to install ANY knob on these trucks with this shifter because it is a splined shaft with no threaded hole or anything to grab onto. The way I mounted it is 100 percent a custom job. And no I will not explain it, since it is "not custom" then it doesnt sound like a hard job for you to figure out for yourself. Thanks for the view

[@jamesprice2163]

​@@tylerfabish5578 thank you mate love the video and the truck

[@shanemintz03]

Buying a JBA Exhaust header kit here in the next few weeks for my 91' Ranger. There's no inspection here in Tennessee so I have no cats, just a straight pipe with a muffler. I'll be putting a manga flow on after the headers and hopefully it'll sound good. It's unfortunately a automatic and just 2WD but it's better than nothing.

[@tylerfabish5578]

I didnt know they made headers for rangers. I could never find a set for my 3.0. Im assuming the 91 is a 2.9 v6? And why not do what i did, the flowmaster 44? Flowmaster 10s sound good too

[@shanemintz03]

@@tylerfabish5578 www.kmjperformance.com/i-31603079-jba-1646s-stainless-steel-cat4ward-headers-w-y-pipe-1991-1993-ford-ranger-3-0l.html This is the link to the JBA header kit that I'm getting. I'm 95% sure this is compatible with my truck. I have a 1991 Ford Ranger XLT 2WD with the 3.0 Vulcan V6. Is there a difference in performance in the flowmasters or are they all the same?

[@tylerfabish5578]

@@shanemintz03 omg my man i am gonna need to see some videos of that when youre done. Please come back and notify me when you do that, ive never seen headers for a vulcan

[@shanemintz03]

@@tylerfabish5578 It'll be at least a month or two until I get everything installed. You have a discord or Instagram?

[@shanemintz03]

@@tylerfabish5578 Update on the Ranger, bought the headers but they unfortunately had to refund it because they discontinued that part. So I've gotta go fishing on the internet for some different headers.

[@kendallbillington2901]

Where did you order your stick from

[@tylerfabish5578]

This is actually completely custom made by me. It was pretty challenging

[@anthonytweedie3467]

Whats the exhaust set up your running?

[@SkyrimEnjoyer253]

It says in beginning of the vid

[@travisperry7985]

Sounds like a 5.0!

[@bigboredom5800]

Just wondering, on a scale from 1-10, how much would my neighbors hate me if i had this exhaust and started my truck at 5:30 in the morning to go to school? Its my only car and I dont want to make more enemies here.

[@tylerfabish5578]

if you copied this exhaust EXACT to my setup, which requires removal of all the cats, then it will definitely make some noise. However, it's a small 3 liter v6, its not gonna make the same noise that a straight piped big block muscle car will. Honestly I'd say go for it, idling its not terribly loud, just don't romp on it until you're down the road.

[@tylerfabish5578]

check the video i uploaded a couple days ago, i did a lot more shots of the truck from the outside while its moving, I also changed it from side exit to axle dumps but the loudness is basically the same so you can use it as an idea

[@bigboredom5800]

@@tylerfabish5578 Thanks man! i think ill go for it, it sounds to good not to!

[@tylerfabish5578]

@@bigboredom5800 cool, check the other video out too. Axle dumps sound slightly different. They both sound good, but i think between the two the axle dumps are my favorite. Since you're going as far as to change the whole setup you may as well get it right the first time.

[@DocsPropShop]

What's the flow master part numder?

[@tylerfabish5578]

I am not sure but it is a Super 44 2.5inch single in dual out.

[@tylerfabish5578]

9425472

[@MelvinElian]

Any advice to me so I can get mines to sound like this I have a 2006 4x4 ford ranger 2006 v6 haha

[@tylerfabish5578]

If you have a 4.0 then you can't. If you have a 3.0 then just copy the setup I put in the video

[@Kenny370]

Doesn't sound like a V8 it sounds like a badass V6

[@jamisonnichols2950]

How much

[@brennanmahaffey3991]

Does it still have the cats on it

[@brookscarver3099]

No

[@eduardoricardo1731]

Que flowmaster es?

[@tylerfabish5578]

Super 44

[@charleslewis8968]

Swap a 4.0 gauge cluster into it

[@wesleyaleixo7944]

Parece uma mocinha dirigindo

[@WillowandKat1]

Is the catalytic converter still there?

[@tylerfabish5578]

No....

[@WillowandKat1]

@@tylerfabish5578 ok thinking about running the same set up on my 1997 4.0l ranger

[@tylerfabish5578]

@@WillowandKat1 the 4 liter sounds different!!! I suggest you watch videos of those first. The 3 liter sounds WAY better than the 4 liter, even though the 4 liter is more powerful. Every video of 4 liter rangers with open exhausts sounds like clapped out impalas or grand prixes. Just be careful

[@WillowandKat1]

@@tylerfabish5578 I'm not running no straight pipes on my truck Im going to go with the 1 in 2 out flowmaster 40 muffler out the back or eather the thrush welded 1 in 2 out or true duals with a 2 inlet 2 outlet muffler of the same mufflers a 4.0 sounds about like yours with no cats but if it has catalytic converters and then it sounds totally different

[@bootlifebastard5665]

What exhaust is it

[@tylerfabish5578]

Read the first 5 seconds of the video, it says right there...

[@S_T_3_V_E]

Think he wanted to know the exact series of muffler, 40 series ect ect

[@tylerfabish5578]

@@S_T_3_V_E like i said, it says in the description. Flowmaster super 44 series

[@dankkitty7226]

If this is a 3L, will my 4L V6 sound even meaner with this exhaust?

[@tylerfabish5578]

No lol

[@dankkitty7226]

@@tylerfabish5578 but bigger engines mean bigger sound right?

[@tylerfabish5578]

@@dankkitty7226 go watch some videos of a 4 liter engine. They sound dull and annoying. Go read the ranger forums. The 3L is the best sounding ranger engine, hands down

[@dankkitty7226]

@@tylerfabish5578 kzbin.info/www/bejne/gIuapK2GnKqcrtk I mean this sounds pretty good to me

[@tylerfabish5578]

@@dankkitty7226 just do it, man. Its your money. Do what makes you happy.

[@keithjones197]

Sounds like like a small Cummins diesel under acceleration.

[@barbaralandals3815]

At 2:07 is sounds like a Cummins

[@04mcdonald]

Take it up in the rpm’s. You shift it like it’s a diesel hahaha

[@351cleavland]

Filmed during the famous 5 minute Earthquake of 2019.

[@nitroxylictv]

sounds like a tiny diesel

[@uncrustable9923]

decent for a 3.0

[@ivancoley11]

It sounds like a honda valkyrie rune motorcycle

[@Bugboi2009]

My grampas truck sounded about the same till it got t-boned

[@kolbyhardy6563]

Idle sounds similar to a v8 but anything after that not a chance in hell 😂😂

[@abandonedwayamoon8749]

Sounds super good but not anything like a v8 !

[@colemcauly7543]

Get on it I can’t tell

[@tylerfabish5578]

Check my newest video bro, thats what you wanna see

[@colemcauly7543]

@@tylerfabish5578 it sounds like a v6 but more like the 4.0 v6 but good popcorn you know any tuners for rangers

[@dalejohns2758]

Good God this dude must be 90yrs old or something! I waited 7 Minutes an 8 Seconds for him to ROMP On it through the gears!! But Nope Nothing at all.

[@tylerfabish5578]

Watch my more recent video

[@MegaRyan123456]

Drones just like any v6 🤣

[@keithjones2340]

good luck trying to pass inspection in states that require one.

[@tylerfabish5578]

Wasnt planning on it.

[@cheeseakins2780]

Stock headers

[@tylerfabish5578]

Yes

[@fiatman71]

Sounds like a 60 degree V6. Nothing wrong with that but it does not sound like a V8.

[@nicknackpattywackshow5011]

Christ. Wtf is the reason

[@wb8040]

Untuned can.

[@chrisbeekley1887]

My v8 ranger sure doesn't sound like that

[@zapwatt]

Nope, sounds like a V6 with loud mufflers.

[@giovanniespino3384]

They sound cool but they old cars in the end

[@83malibuwagon]

What's your point old cars are better than new cars so that's a compliment

[@DownSouthPerformance177]

You don’t even get into it

[@tylerfabish5578]

I've got another video up. Regardless. "getting into it" takes like 10 seconds to hit 60 mph, its not a race car.

[@DownSouthPerformance177]

Tyler Fabish I meant just simply putting the pedal to the floor and not driving like a pussy

[@vdubgarage6781]

Literally sounds nothing like a V8.