94+ Mustang Cooling Fan Issues Resolved

Here's some info on how these systems work and how to overcome the issues.
Its as simple as some tuning and an easy wiring upgrade.
/ 1192920668291386

[@dvinpeace]

So now its done its a big difference thanks again Ted! Runs cooler 😎 👌 Amazing harness....

[@tuninginnovations5481]

Thanks for the feedback.

[@keithjones7674]

Hi Ted, have your fuel lines, they work great thank you! I connect a ground switch to the CCRM so I can turn high speed fan on manually but sounds like that might overload the system if I run it too much. Can I set this harness up with a switch or have a temp sensor but also have a override switch? How do I buy the harness? thank you

[@tuninginnovations5481]

Hi Keith, what I build is rated for contiguous use. It can be triggered with a thermal switch and override or built to use a positive trigger usually supplied by the CCRM. You can DM me if you want one, thanks

[@last302]

Hey Ted. Good video. I probably watched this video 5 times since posting it. Any chance to see a CCRM delete setup with better relays and wiring?

[@tuninginnovations5481]

Thanks, let me see what I can put together.

[@jamiesonkimball5635]

You say in the video that you make the wiring harness, do you sell them and if so how much is it for one? I would like to purchase one for my 94 cobra running a terminator x

[@tuninginnovations5481]

I can build them to order. Please message me from my website tuninginnovations.com

[@tuninginnovations5481]

We are at Ponies in the Smokies until 3/26/23

[@tuninginnovations5481]

Looks like those will sell for 110.

[@carlosfoster8143]

I just purchased one of these where would you connect the trigger wire.

[@tuninginnovations5481]

Once it arrives I'll go over how to connect the trigger.

[@carlosfoster8143]

Man thank you so much just took air out of new radiator and wired your setup before... Worked like a charm... Highly recommend this setup

[@tuninginnovations5481]

@@carlosfoster8143 You're welcome

[@hunternewby5727]

Ted, do you know if it still shuts the fans off above 45mph when the A/C is on?

[@tuninginnovations5481]

Yes. 45 MPH wind speed through the radiator is more than the fan can produce.

[@DanielRamos-jf3up]

Hey Ted. Always great vids. Where would I trigger off of to run the really at the lower temp? Or would I need my chip updated first?

[@tuninginnovations5481]

I use the old fan power wires as triggers. Just depends on what you're doing. It can be done with tuning also.

[@DanielRamos-jf3up]

@@tuninginnovations5481 sweet. If I wanted to bypass ccrm completely and just run a relay setup I can trigger off the ecu low fan output correct? What wire gauge and fuse are you using? If you don’t mind me asking. I did some research for amperage and stuff. Would I need to use 6 gauge wire and a 50 amp fuse? Speaking longevity wise

[@joerodriguez8412]

i have a 98 mustang 3.8l my fan does not turn on when should i have wired a switch to it to turn it on and off i want all new wire for my fan ive checked fuses

[@dominicdelaurentis1574]

Do u sell these wires relays

[@tuninginnovations5481]

I can build them to order. Please message me from my website tuninginnovations.com

[@mikehyink5018]

How much to build me the harness for my 94 mustang for running the fans

[@tuninginnovations5481]

Hi its 125