97 Jeep Grand Cherokee Cherokee long arm lift is almost done.

[@kristynwebb799]

😍😍😍

[@rigsoffrods9386]

Could you tell me what you used in your kit, springs, shock absorbers and arm? measurements, sizes

[@JEEPERDUDE98]

I’ll have to look for some part numbers but the front springs are rubicon express 5.5in lift with 1 inch spacer’s. Front shocks are bilstein 5100’s mono tubes I think extended length is 26in compressed length is like 16-17in long rear shocks idk they came off a stock f250 4x4 they are extremely long. I haven’t maxed them out yet. Rear springs are from a 98 limited 5.2l grand Cherokee and have 2in spacers on top. The long arm kit is a rough country long arm upgrade kit you will need the trac bar and drop bracket from them also bought separately. I bought the track bar kit for the 4.5in-6.5in lift something around those numbers. Front Brake lines are for a 92 1500 Chevy 2wd. Pretty solid kit I did a v8 grand Cherokee steering swap drag link and tie rods,off a v8 parts jeep I have sitting around. This kit does not utilize a rear sway bar with it so I wouldn’t recommend using the front to back springs they seem a little soft for it. I plan on getting 5.5in rear springs later on and adding something to guide the spring back into place so it won’t fall out every time.

[@rigsoffrods9386]

@@JEEPERDUDE98 it was very good, congratulations