Codes C1140 C1142 C1200 C1401 C1010 C1012 C1022 C1024 C1032 C1141 mercedes benz m class cars
Пікірлер: 40
@tpdtopcop2010 Жыл бұрын
Thanks for the video. I am about to replace mine as the bas/esp light illuminates on the regular after turning corners.
@JerreHui3 жыл бұрын
Thanks so much, it helps me to get the idea, of how to remove the concel. Good work on youtube, Thanks, Brandon!
@brianderekbass3 жыл бұрын
Great vid! This is a big help. We have a 2000 ML320 and this is one of the problems it has. Thanks Brandon for posting! Subscribed!
@Brandonlexx13 жыл бұрын
Brianderek, thanks for the feedback and thanks for subscribing! Hope it helps you out. Good luck to you my friend! Oh and keep smashing that bass! Sounds great!
@brianderekbass3 жыл бұрын
@@Brandonlexx1 Thank you buddy!
@Brandonlexx13 жыл бұрын
You bet! Good luck!
@donmerryman7607 Жыл бұрын
Aloha, When you replaced the lateral acceleration sensor what lights on the dash went out? I did enjoy & learned some things about replacing mine. A 2002 Mercedes Ml320 Mahalo, Don
@Brandonlexx1 Жыл бұрын
Aloha Don, when they go into "limp mode" they flash like every light on the dash. It shut them all down.
@emfarfan Жыл бұрын
Hi sorry to resurrect an old thread but you just popped up. I have a 2000 ML430 and find it interesting that many components can cause the ESP warning lights etc and beeping. What code did you find or was it simply live data read out. My ABS goes out and I consistently get C1300. I have tried various fixes including my last change of the ESP module with a used one. I was good for two days and now back to every time I drive. The only test its failed is no power across 2.46 and 2.23 in the connector. No describes this test throughly so I don’t know if key on, connector off is valid or it has to be plugged in. I of course replaced the relay K25 and F22 looks good. I have gotten an intermittent C1314 but also seems to point to lost contact to ESP control module, any thoughts? The only independent tech I trust does not work with after market parts which is all that is possible on my older ML
@Brandonlexx1 Жыл бұрын
This was a long time ago but I remember that there were many codes related to the stability system. Think this fixed them all but there are several other sensors that could likely cause similar codes. Probably worth the diagnostic if you don't have the equipment to do it your self. Good luck
@FeritElveren-im2hv Жыл бұрын
w163 can't move forward when one wheel on the same axle goes free, brakes apply, same situation, on muddy ground, the brakes lock, can't move forward, malfunction lamp does not come on, what could be the problem?
@Brandonlexx19 ай бұрын
No idea of the top on my head. What did you find?
@PEGASEYE.4 ай бұрын
Did you find a solution? My W210 reacts the same. Brake lights are good too
@chadwick6673 жыл бұрын
Good day, I'm a little curious about your $10,000 scanner? Where can I find one in Canada?
@Brandonlexx13 жыл бұрын
The scanner is the newest Snap-on brand scanner. Most of our dealers in the US are mobile trucks that go from shop to shop. Honestly, I jumped the gun a little when I bought it. I love it but there are other significantly less expensive scanners that will do much of the same thing. In addition you have to pay yearly to keep active software. I would look at the Bosch if I where going to buy another.
@andrewchase1754 Жыл бұрын
Great video. I'm a car guy. I have these codes. C1140-8 C1142 C1022 Light goes on and off. 1999 ML 320 140,000 miles. Car is in great condition and very well maintained otherwise. Any ideas? Thanks
@Brandonlexx1 Жыл бұрын
Sorry for the slow response. I would have to view live data on a scan tool to get an idea of what it is doing. Sorry.
@ninerpointone19119 ай бұрын
Great video! But for the love of God, I do not understand why nobody wants to use a tripod instead of shaky, paused videos, one hand cameraman...
@Brandonlexx19 ай бұрын
Thanks, working with what I got!
@jacobmarcus32632 жыл бұрын
Can that sensor stop the vehicle from accelerating.p1605 is the error code
@Brandonlexx1 Жыл бұрын
Yes. Limp mode.
@mahmudmohammed71552 жыл бұрын
Hello What causes c1401 fault code on my ml320 2000y
@michaelclark8137 Жыл бұрын
Most likely the brushes are worn out in the abs motor.
@jayvirtusio10812 жыл бұрын
if i take it out can i still drive the car with out it ? put it back once i get the new one.appreciate the help.thax
@Rhajosy12 жыл бұрын
I have the same question. Will it avoid the unintended braking problem if it’s just disconnected?? Can I drive it that way?
@cipri662 жыл бұрын
@@Rhajosy1 no
@jayvirtusio10812 жыл бұрын
@@Rhajosy1 yup! still waiting to his reply hopefully we get answer before xmas😄😄😄
@Brandonlexx12 жыл бұрын
Sorry, but I am not %100 sure. I know that you will indeed have lights on and that you traction control will surely be disabled, and it may mess with your braking.... But I can not confirm if the car will still operate without the sensor in place. Never had a reason to try... Responded before Thanksgiving even!
@jayvirtusio10812 жыл бұрын
@@Brandonlexx1 got you 😂😂😂
@toutsandler3739 Жыл бұрын
Did that sensor made the car fall in limp mode ??
@Brandonlexx1 Жыл бұрын
Yes
@toutsandler3739 Жыл бұрын
@@Brandonlexx1 Thanks for the reply. I really needed that answer.
@janeokija80712 жыл бұрын
Where you located at
@Brandonlexx12 жыл бұрын
Northern Utah
@cipri662 жыл бұрын
This lateral sensor is very expansive,don't understand why can you confirm ?
@Brandonlexx12 жыл бұрын
Sorry, but I am not sure that I understand your question. Are you asking why it is expensive?
@cipri662 жыл бұрын
@@Brandonlexx1 yes
@Brandonlexx12 жыл бұрын
Oh.... It's a Mercedes Benz.... 20 years old or not, everything is expensive!