99% Don't Know These Woodworking Tips and Tricks (Compilation)

[@731Woodworks]

Click "MORE" to expand for links to tools and more! Video To Watch Next: 99% Don't Know These Wood Storage Mistakes! kzbin.info/www/bejne/rnKbpZaGfqh_n6csi=ZT4mtASanZUJgIX8 Build a woodworking business without expensive tools or a big budget. Learn more about my coaching program - sawduststartups.com Tools in this Video: MicroJig DoveTail Clamps and Bit - amzn.to/3u4NuqD DFM Square - amzn.to/49C1mcu DeWALT Table Saw - amzn.to/3QW8lED Massca M2 Pocket Hole Jig - amzn.to/47fFulp Face Clamp - amzn.to/46fc4Tb Right Angle Pocket Hole Clamp - amzn.to/3QA3YP5 CA Glue - amzn.to/3snj5Uh Pocket Hole Screws - amzn.to/3uhCLcM DeHumidifier - amzn.to/46e7CEn Bora Wood Storage Rack - amzn.to/40Bsx2Q Pre-Stain Conditioner - amzn.to/3FYNhIu Sanding Interface Pad - amzn.to/49K5Q0G Spray Laquer - amzn.to/40ymQmh Sanding Mouse - amzn.to/40AN1Zr Swanson Straight Edge - amzn.to/3SAPZev Kreg Rip Cut - amzn.to/47gXcFm Bosch Router - amzn.to/3ukYOyX DeWALT Router - amzn.to/46hg0To Skil Router and Table Combo - amzn.to/3sy4ntw Whiteside Router Bit Set - amzn.to/3u8RrdT Sanding Disc Organization Container - amzn.to/3sBKmCc Paste Wax - amzn.to/46hWVQR Bow Push Sticks - lddy.no/1i927 Bow Featherboards - lddy.no/1i928 123 Blocks with Connection Hardware - lddy.no/1i929 Table Top Fasteners - amzn.to/46hXha9 Framing Square Fence - lddy.no/1i92a Where I Get My T-Shirts - bit.ly/40oBlJt As an Amazon Influencer, I earn from qualifying purchases. This helps support my channel so I can continue to make content like this. Some of the links used in this comment are affilate links and I may earn a commission on qualifying purchases. 📲 Never miss another tool deal. Sign up for my Tool Deals SMS Alerts - NOTE: I text out tool deals so you don’t miss any! text DEALS to 1 [phone] Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Important to add the word DEALS to the text! 🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! www.patreon.com/731woodworks Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

[@michaelsavino3631]

❤❤

[@samriley8278]

Opq😂

[@simonpetermurrell]

For someone who has done woodworking for some time, I find it refreshing to still listen to your solid advice because I always believe we never stop learning new tips and also remember tips which you may have forgotten!!!! Keep the videos rolling! They are brilliant!

[@Shannon-v3r]

As someone who is just coming up on a year of starting their journey, even though I’ve watched these videos individually, it’s nice to watch again. There are so many facets to woodworking and after hours and hours of researching and watching videos, it’s impossible to retain everything. I’m only 45mins in and already have so many things jumping out to me

[@johntiefel4248]

I been in carpentry and general construction for over 50 yr. I really appreciate your videos, I always learn and relearn ideas from your shows. Thank you.

[@kyledefreitas89]

As a hobby, and sometimes professional, woodworker for the past 21 years I can say this is a great video for any moderately new woodworkers to run in the background on some isotunes while sanding. Multiple times. Lots of really good information here! Well done guys. You're appreciated.

[@NM-gr7ol]

Every time i watch one of your longer videos i find you take me on a joirney i didnt forsee and i almost always end up somewhere i needed to be. Thank you for all the time and effort you and your family put into your craft. You help far more people im far more ways than youll ever know.

[@Quazimo]

2:19:03 absolutely, felt like a failure lately, feeling stuck, overwhelmed, lost, but we gotta get a grip and party on, aint nothing to it but to do it! you got your mind set on a goal, or project, dont sit around and procrastinate, causes time for doubt, get a game plan together and rock it out, no one is stopping you but YOU

[@andrewallen8764]

Thanks Homer 😂😂😂

[@SharonHendricks-x8f]

As I'm watching ALL of these things you present in this video, I'm reminded of just how much I DO NOT KNOW about the power tools that I have. One time....just once....I had a kickback on my table saw and honestly...? I'm quite intimidated to use it again. And just that fact alone makes me hesitate to use it, especially when I'm by myself. I have a router but I've never used it, and I want to use it. Watching you with those templates was so good for me because I knew I had no idea of the correct way to approach it. You had 6 kickbacks....I bet I replayed that whole thing at least 5 or 6 times to get it straight in my mind of what you were doing and why you shouldn't have done it that way. Thank you for demonstrating the correct approach. I'm a 79 year old grandma who loves to make things, but I want to be safe in doing it!

[@rosethorn8613]

Thank you for being an inspiration. 😃 I am 51 and a woman on my own, just looking into starting wood working. I've been doubting whether or not I could even do this and I haven't even got any tools yet! Still researching what to get to start out with. Also, not many women do this, so I've been doubting whether I'm even physically strong enough. So reading your comment has been a big help to me. Especially the part about the table saw. That's a scary tool! I'm definitely not going to get one of those any time soon! 😆 However, your bravery with your table saw has me thinking that I will, one day,..... just not right now. 😬😆 Thanks again. 🤗🧡

[@awhite55grands]

Matt, I’ve been subscribed since your days of small beginnings! Found you years back with the farmhouse builds. You are amazing!! Even with the great success you’ve been blessed with, you’re still humble & serving all of us. It’s human nature to lock into the negative comments, and skim over all the praise. I read many of the comments here and the one (1)! that was complaining about the length of the video gets swallowed up by the sea of gratitude!! 🙏🏻 !!! So, pay no mind to that unfortunate person who clearly missed your objective! Keep on keeping on Matt! You make a difference & an impact!! THANK YOU!!!!!

[@731Woodworks]

Thank you!

[@jamiew.lacroix7055]

You're video gives me the hope I can become an extreme amount better using my power tools, just so you know my father was a East Coast Master Cabinet Maker and he taught me zero you however have made my small dream come to closer reality. Thank you for all the hard work.

[@NastyE420]

I loved it Matt, when are you gonna do another like this? A bit more informative than that shop class I used to go to when I was school.

[@theone1347]

Totally agree that it IS a long video but imagine the amount of great tips a new woodworker hobbyist will learn in just 3 hours and save themselves money, time and probably their limbs. Excellent work. Keep it up.

[@mikeandlucky]

Really appreciated the shopping for hardwood section again. You do a GREAT JOB on doing these interviews and ask the questions that most woodworkers would ask themselves. It is intimidating to go hardwood stores at least initially. I found the first couple of places I went to be seemingly annoyed by a hobbyist woodworker just wanting to buy a few boards. By expanding by search radius I found some really great hardwood suppliers in North Carolina who treat me great and appreciate my business and I now enjoy the process very much. I have to drive a bit but it is well worth the trip.

[@ca3921]

Great video! I Learned to use an Inspection at the SerfPrep booth at AWFS back in July. Has made a HUGE difference in my finished products. You were trying to show sanding and planer marks on raw wood that only shows up after the wood is stained. An inspection light (hard Light), held at the side lets you see all of the imperfections by creating shadows on the scratches and imperfections. Light at the top does not show the imperfections, you need to move the light 90° to the side. Then you can see all of the scratches as you work your way through the grits. It makes a huge difference.

[@Damon_Barber]

Great tip!!

[@Edgar.242]

Really nice Matt, this is the Bible of carpentry, really appretiated all your effort you put in making videos and share your knowledge with the community I have learned alot not only from carpentry but also from being a good person. Greetings from México

[@mongo.outdoors5479]

I am loveing the video. I even started it over to take notes with time stamps to follow-up on when I run into different problems.

[@mikekoss1i]

Dude! That was mind blowing how simple and versatile that setup is! I never would of thought! I'm still a rookie carpentry enthusiast and love learning new hot tips! Thank you! You're also great with your demonstrations!

[@HomeImProveMentHow]

Thanks for the heads up with the plastic push Stick, But No wood worker needs a plastic woodstick.Nothing *Like a wood Push Stick💥👍💥*

[@benjamintimmins1656]

Lot of good info. I like the piece about not being lazy and not telling your customers the little mistakes you made...👍

[@martinda7446]

Beautifully presented. A true craftsman's skilful problem solving given to us DIYers with much generosity.

[@frenchgreguk]

My favourite part of your video. The hardwood lumber store! Mark Puente was sooooo knowledgeable and passionate, unreal they still make men like these 😂

[@sazennonumber]

Loads of good stuff. Didn't blink the entire time (although I did eat an entire chocolate bar). Your friend Mark is amazing too. He knows stuff and he's humble and mellow. Thank you for uploading!

[@scottlanesimpson]

Thanks for communicating your tips with a grace filled attitude. That makes us more attentive and the message sink in deeper. Keep your light shining it’s a blessing to see. :)

[@bradsimi3337]

Side note: Baltic birch is great for Sound as well! Very good resonance particularly in the lows if you ever want to build yourself a nice sub enclosure for home or car high ply 10+ Baltic 👌 more plys the better! Would love to see you build one on a video! Be good to test those angle screw skills you have! Sure the end product would be beautiful and sound amazing!

[@North_9]

Really enjoyed the video. You sure did find a lot of ways to join boards w/out a jointer but forgot a really easy, convenient way that's been done for centuries. A handplane. A good, sharp jointer plane is pretty quick for small one-off projects. A decent plane might run $150, so not dirt cheap, but it's money well spent.

[@2tart]

I appreciate your content man, I've watched all 3 hours and 32 minutes over a couple of days. Learned a lot and I just want to say thank you for sharing "the most dangerous tool in woodworking" I can see how much that bothered you and you posted it online for us to learn from it. So thank you, buddy!

[@731Woodworks]

Thank you!

[@T0MaTOS]

Thank you for your informative videos. I enjoy watching and learning from them. Thank you for the advice on just getting started in woodworking. Mistakes will be made but as long as you learn from them. JUST DO IT!

[@xref-vz1zw]

Best 3+ hours spent yet. Thanks for sharing your knowledge. Best tip was .... well two... the jointer sled and the last miter saw tip. I'm looking for plans to incorporate my worksite table saw, miter saw and router table into a work bench. Miter saw would need to flip down so the bench could serve as a runout table. Do you have plans for that?

[@731Woodworks]

No plans for that yet. Sorry

[@billzima7068]

Just finished and just wanted to say thank you for putting together some great tips and tricks. And it's only the real men that shows his mistakes just so it can possibly help others from making the same mistakes and I really appreciate that. Im definitely gonna subscribe..great job brother!!

[@MattVance]

...gotta tell you~ blew my mind on the trick for cutting angles larger than your miter saw was capable of... BOOM~ mind blown... Thx,

[@andrewhayward2345]

I loved this video. Very informative and very professionally presented. I spent a few days watching it and going back over parts of it again. (in between other things) in this video I learned a variety of techniques I was unaware of as all I have learned has been through experience and KZbin. I have saved it to watch again!😊

[@jesserojas1957]

These videos my be somewhat repeated from other videos that I have seen it comes in handy as I forgot or forget some important steps along the way so so I appreciate the go overs on these videos thank you for tips and I enjoy watching all that you have to offer sincerely Jesse

[@jerrybyrd7778]

Actually I watched the whole video, and what I have to say is thank you. I realize that a lot of this is old hack for a lot of people, but I did find several useful nuggets and a couple of good reminders tucked in. Again, thank you and if you make another one like this, I will probably watch the whole thing 😊

[@731Woodworks]

Great to hear! Thank you!

[@ravenheart1439]

Wow glad I come back to watch the rest of this...I just learned a TON about wood....man thank you...

[@inflamedcarnie]

2:01:55 The easiest way I've found to prevent blowouts with a forstner bit: just place a piece of scrap wood under the piece you need to drill. The downward pressure keeps it perfectly clean. Great video!

[@StarburstMC]

Tip #2 Was very Helpful, I am building some cabinets and I had that problem, thanks for the awesome tips!

[@RAcreativewoodworks]

Matt went I am in the shop I listen to you in the background. If I hear something I stop and watch what you are doing. I think that some creators videos are to short. Thanks man keep it going 🎉

[@731Woodworks]

Awesome, thank you!

[@EEEZSolutionS]

Matt---- you've outdone yourself with this one!!! I'd already seen, probably, 50% of this compilation but as one of your other commenters said, as a newbie (1 year now) retaining all this information is not possible and the review you gave is a master course review! Thanks sooooooo much for taking the time to educate us new kids on the block. So many of the tips and tricks you share really help folk like up our game. I'm not interested in making a profit but rather enjoy making things as gifts for friends and family.... such personalized gifts are so much more meaningful than store bought. I do have on question... do you use software for project designs? Again, thanks for sharing the knowledge -- and BTW, I have purchased many of the tools you've recommended such as the framing square fence and BOW Xtender fence and they are AWESOME!!!! -- Larry

[@731Woodworks]

Thanks Larry!

[@kaydogg2086]

Positive attitude even gives a peptalk and nice to look at then I saw his T-shirt subscribing ❤❤

[@JUANCANTU-y1c]

I''m learning a lot from the tips and tricks you provide, means a lot to me, also i got a question (if you don't mind), where do you buy your t-shirts? I love the message on them. Thank you and God bless you and your love ones !!!

[@terryheimerl8674]

Great video for newbies and us old farts. The inspirational section will definitely help new starters. Good safety tips and examples to either teach the new or give us older types a slap on the back to show that you are never too old to be reminded of safety. Terry from Australia.

[@Flatlinerrr]

Found your channel recently looking for diy desk designs and have been watching a bunch since. Really enjoy the content, can’t think of much better woodworking videos on KZbin. Great work

[@731Woodworks]

Awesome! Thank you!

[@SenorBigmac]

I'm just starting. Love this. Glad to see ryobi. I love that brand.

[@LivingTheLifeRetired]

This is a marathon. I need to come back and finish watching. Excellent so far.

[@asd67lkj]

Had this video in my 'watch later' folder for some time and over the past 2 days watch the video in full, Some great tips there.

[@G.I.JeffsWorkbench]

Thanks for this compilation. While the video is long, it’s also comprehensive (the purpose of a compilation, right?). I have learned a lot from you since subscribing. The biggest thing I learned, or was reminded of, is that you can get it done if you try & if you stick with it. The best part & why I keep coming back to your videos is that you are an ordinary man trying his best to share what he’s learned on his woodworking journey (not just another KZbin “actor” reminding us that he’s a fancier woodworker). May God continue to bless you, your family & your business.

[@731Woodworks]

Thank you, I appreciate that a lot.

[@mesoed]

Note of the tapering jig. Don't add the grooves all the way across the jig. Stop about a half inch before the blade side of the jig. This is more of a safety measure to ensure that the clamp doesn't stick out of the jig... something you really can't see once your piece is on the sled.

[@seanjohn83]

Good Stuff. I literally came to the comments to suggest this very thing.

[@EEEZSolutionS]

Yup. already cut the tip of one of my clamps because I wasn't paying attention!!! Great suggestion!

[@trevorswearengin3335]

Came to say the same thing.

[@steveasula]

Great video, nice to have all the tips in one place. I can just pause and come back to it when I like.

[@circe42]

This Video was absolutely Awesome THANK YOU FOR THE GREAT TIPS

[@joejames3929]

Matt, great use your library content for us followers. I have watched you for a few years now and have to say that most of this I have seen in years past however, it is great to know I can find it in one location. Highly recommend more in the future. Time well spent. Thanks. Carl

[@731Woodworks]

I appreciate that!

[@Megellin]

An old sock makes a great applicator for staining. It stays on your glove hand well, and gives you a lot of control over the staining process.

[@EvanSarris]

Regarding measuring inside a cabinet or between two walls etc, I just watched a video with this tip: I’ll use the inside of a cabinet that is 16” wide as an example. Take two pieces of wood such as 2” x 10”. Place each end of each piece against the wall of the cabinet. Secure both sticks. The total length of both sticks is the EXACT width of the cabinet

[@joshuaknestaut7356]

Love the long format video and thank you for all of the knowledge/pro tips that you give us.

[@thegrither2811]

My biggest mistake when starting out was using my table saw without really knowing how. Got REALLY lucky with a few kickbacks

[@rickgibson8220]

Best Video my favorite all together thanks! Have a Blessed Day

[@731Woodworks]

Thanks!

[@KCandKacie]

I for one loved this video. You don’t have to watch it all at once

[@stevenpayne827]

Thank you for the video you taught me a lot from these videos thank you. God bless you 🙏🏽

[@sellarsr123]

Where is a good place to order some good wood for projects I’m new to woodworking ( Beginner ) you have inspired me so much. I’ve been in a bad place for a while trying to get my disability started and it been over 3 years so I’m trying to get some tools together to start by spring. You and another guy I’m following have put life back into me and I thank you so much. You are a good hands on teacher. Thank You.

[@731Woodworks]

Woodcraft in-store, f you have one close, or you can purchase online from Woodcraft, Rockler, or Woodpeckers. They all have regular sales on their hardwoods.

[@dwintster]

Another great video, it applies to artists and designers as well.

[@warrensmith2902]

Additional tip -- Keep enough pocket hole bits on hand to set them to the appropriate depths you use and then leave them at that depth.

[@anthonyfortier8765]

Nice tip. I might add to use some loctite if using this method.

[@ThekiBoran]

@@anthonyfortier8765 red or blue? :-)

[@anthonyfortier8765]

@@ThekiBoran If you want the ability to take it apart, and aren't covering with dowel, blue. Wet coat and straight in. If you want permanent, use red and let it set up before installation. Coat the threads, give it at least 5-10 to form an outer layer, and make sure you compress it between threads.

[@erallen97]

That’s a great tip using he pocket hole drill bit as a counter sink. I will be using that tip. Thank you!

[@reddlief]

Tools I used around others or had someone want to borrow a hand tool, I used the plastic dip to mark my tools. That way they are immediately recognizable. Thanks for the reminder, I just added a can to my Amazon order.

[@redslover5293]

Country Breakfast, thanks for taking the time to putting together some of the best videos I've seen about woodworking. I've been watching them for some time and really get a lot out of them. Please don't let your "fire" burn out. I have often wondered how you came up with the name "731 Woodworking" and, after reading your bio I know. I really like your reference to Hebrews 6:19. Hope you and your wife have a blessed day. Red Ps: I really like the Christian T-shirts you wear and have actually bought one of them.

[@nicholasrichardson2330]

I just picked up my first mitre saw (Dewalt 779) that I got for a steal. This video was very helpful as I had doubts re. the contractor grade blade that came with the saw. I’ll be using the saw for hobby use, including picture frames and cutting crown moulding. Thanks for the information. I’ll likely pick up a Diablo blade…, but definitely will get a 80 or greater blade count. Your videos are terrific!

[@KennethD8557]

Have watched serveral of your videos... Really enjoying them! Keep them coming!

[@danfleury7342]

I fell asleep with the TV on, woke up to this guy describing the dangers of what I'd assume to be linseed oil soaked rags. This dum dum proceeds to place crumpled rags in a pile of dry leaves outside 😂

[@zubirhusein]

Same lmaoo

[@HBSuccess]

True - but if you’re going to burn your leaves (around here - common) it’s win-win 😂

[@amandablurton7874]

Same i just woke up to this

[@GoblinSpanker]

This is why I checked the comment section. Dumb thing to do. If you insist on leaving the, crumbled up, leave them in a fire proof bin, away from anything flammable. Maybe the leaves were wet. 😂

[@LyndaMathis-ob2to]

02:00

[@ryanchristopher2207]

Hey Matt just wanted to offer a suggestion to try. In regards to your workbench Having a sticky feeling left to it I am thinking something like tacky feeling. Something I very very recently learned using spray paint here in humid Florida sometimes the curing process doesn't go great and I end up with a tacky finish that can last days, weeks sometimes it seems indefinite. A little trick I learned it's a bit messy but you could try sprinkling some talcum powder or even baby powder on the tacky surface and allow it to sit for a day or more. Then sweep or vacuum up the powder and you just might find that tacky feeling is gone. I can't promise that it will work but what do you have to lose? The powder will absorb any residual leftover moisture that you're finish might have left on it. Again I was doing this for tacky spray paint but I feel it might work for your application as well.

[@jonathanrose456]

Great video. Nice to be reminded of these

[@hollygaming2020]

Brand new beginner and all I’ve got is a circular saw, 12 inch miter, sawzall, sander, and router. Trying to do small projects to learn on and would like to do picture frames, etc. What tool would you suggest next? Just go full bore and get a table saw? I’d like be able to plane and joint as well as I have access to free pallets. I know the answer is buy them all but what would be best as my next tool in the shop?

[@garymiller5937]

Thanks for all the tips Matt. I appreciate it! 😊😊😊😊

[@DerbyDad03]

So many great tips! Consider another: Right handed people should be using left blade circular saws. At 51:02, as you are looking "at the inside of the blade", you are leaning over the saw because the blade and the cut line are on the opposite of the saw from where you are standing. If you switch to a left blade saw, you can look directly down at the cut line to line up the blade. I learned this from a master framer 50 years ago. Imagine how much leaning I've avoided in half a century! Try it once and you'll never go back to a right blade saw.

[@darrellsr0526]

Awesome info. Thank you for all of the very important tips!!!

[@bluefalconcatering]

This video really made a difference in my woodworking. Thank you.

[@731Woodworks]

Glad it helped!

[@JUANCANTU-y1c]

AMEN BROTHER ! GOD BLESS YOU AND YOUR FAMILY ! GOOD JOB!!!

[@ProudDadVet]

When it comes to push sticks, I don't trust anything plastic, but I do like the Gripper so... I made a wooden gripper using (2) 2x4x8" long. I cut a dado into the top for a forward slanting "D" style handle and an 1/8" thick piece of hardwood attached to the back end to catch the back of the stock for ease of pushing. It rocks and best of all, I made it from scraps. 😁

[@Deek-iw7tl]

This is one of the best videos that I've seen and very I'm explaining

[@billzima7068]

This is very informative video and some great tips for newbies and even experienced with a open mind and willing to change with the times. A++ on the video

[@denisbeaudry5396]

Great video, love the compilation.

[@731Woodworks]

Thanks!

[@Shannon-v3r]

Oh yeah, I have to add that if this was available a year ago when starting or even just the researching and trying to build the confidence to start, this video would’ve been an absolute essential. And that’s not to take away from the value of it to me today

[@andrewallen8764]

I built a frame at the end of the kitchen cabinets and now 'm trying to match the kitchen trim to trim that frame were talking about a 44 dollar pice of maple here don't want to screw it up but.. I HAVE NO IDEA WHAT IM DOING I SO APPRECIATE THIS VIDEO...trying to figure out if I need a router table...so forth and so on anyway thanks for the encouragement 😊😊😊😊😊😊

[@Jonathan-gb6co]

Excellent video, and great to have several great pieces of advise in one place so I didn't have to go looking for them separately!

[@Skebtik]

Why does KZbin always suggest your Channel? I don't even woodwork, I do metal. Man stuff.

[@IsWIM872]

Just woke up alsy to his vids 3th time this week. Mot really even a sub or fan at all

[@731Woodworks]

Well, I appreciate KZbin helping me out and auto playing it for you 🤣

[@mr.ramosvm367]

I completely love the hall video 😊 I really enjoyed you explaining all the details, God bless 🙏

[@Billy_bSLAYER]

An awesome gathering of some of your best! Happy Holidays and God Bless!

[@bobdriggers6111]

About measuring. I always use the same tape for a project. Go to the tool store and grab a few and check them agaist each other........you may be suprised on the outcome. For inside measurment, make story sticks. They are very simple to make and, there are many videos on how to make and use them. I also use them after my first demensional cut for the entire project.......just make sure the initial piece is square. Also, bevel the downside of the sticks for easy removal.

[@bobdriggers6111]

Also, bevel the downside of the sticks so you can get them out!

[@roderickharvey1427]

THANK YOU. I loved the Believe section. Thanks again.

[@lelandpowell2468]

You can get rid of clamp dents with a household iron. Put a cloth between the iron and the wood. A damp cloth will reduce the temperature of the iron but isn’t necessary.

[@true_believer72]

Cowboy Cerrone is doing woodworking now. Cool

[@Megellin]

To fill cracks and knot holes just use fine sawdust from sanding the same wood mixed with wood glue, and it will closely match the wood when dry

[@vernsteinbrecker3759]

Took me quite a few attempts to finish, lots of pauses , but got through it. Great video

[@lutherbeck5235]

Great vidio! I am a new woodworker and learned so much! Keep up the good work!

[@JamesKnighten-j1s]

Great tips and tricks. Thank you.

[@pashay4723]

i really like your presentations. Thanks

[@731Woodworks]

Glad you like them!

[@Mike-wc1ns]

Awesome presentation and very informative!

[@Walter-ts1vu]

thanks for sharing.

[@medic5271]

Youre from Maine? Awesome tips and I did almost the exact same thing wit a push stick (without injury, thank God)

[@731Woodworks]

Thanks. Not from Maine, had the previous Colonel of the Maine State Police send me that plate as a gift.

[@DaveEbert]

thank you for your videos helps me alot

[@MikeStJohn-du5ue]

Thanks, some of these I had seen but many I had not. Nice to have them all in one place. Look forward to more in the futuer.

[@731Woodworks]

Glad you enjoyed!

[@lkayh]

If they’re telling you not to stay in the house during bad weather, including blizzards, it’s not sturdy at all. It could break up on you in high winds or under the weight of a lot of wet snow. I wouldn’t go for that last one-I’d be really cautious about all of them. It’s probably worth the additional money to go with reputable modular or tiny home builders in your area.