99 Speed Spot Welding Machine, with Intelligent Numerical Control

[@elektronomia5988]

Rencana mau beli spot ini juga... Tapi masih jarang bngt yg review model ini

[@iwamus2439]

kzbin.info/www/bejne/nIaTfGh7oqh4Z8k Yg ini tinggal pakai sudah terpasang dari sananya. Hanya men display gear saja, sedangkan yang satunya (yg datang pretelan) men display gear dan voltage secara bergantian. Secara fungsi sama saja asalkan power supplynya bagus min 40 Ah, 12 V. Dibeli online @Lzda.

[@elektronomia5988]

@@iwamus2439 klo spot yg biasa tanpa display saya udah ada, cuma kemarin meledak mosfet nya gara2 saya pakai super capasitor 3000f x 4 biji, yg pake trafo juga ada cuma listriknya sering trip😅😅... Makanya mau cari alternatif

[@iwamus2439]

Banyak pilihan ini juga handy; kzbin.info/www/bejne/j2qXlmOHmc57l7s

[@oturanboga6225]

[@themastereal8345]

How should i wire up with the foot switch interface

[@iwamus2439]

Connect with male jack socket (similar with LapTop Adaptor/power supply socket) then connect to foot pedal. www.amazon.co.uk/mxuteuk-Momentary-Nonslip-Handsfree-Industrial/dp/B08JLQCZ4C www.amazon.co.uk/mxuteuk-Momentary-Nonslip-Handsfree-Industrial/dp/B08JLQCZ4C

[@dj_sorra8605]

Can I power the module with a 15v 3.5Ah power supply?

[@iwamus2439]

@@dj_sorra8605 voltage is higher than required. It may damage the module

[@kgsalvage6306]

Wish you would have shown the the other settings. Just got one and cannot figure out what P- 1,2,3 and A- 0,1 is?

[@iwamus2439]

images.app.goo.gl/X1zDeZWVEKo8sovd6

[@iwamus2439]

kzbin.info/www/bejne/nIaTfGh7oqh4Z8ksi=Zdpk2pNYT0g62Yg-

[@zoeconner11]

Any help on making this battery that will work for the welder?

[@iwamus2439]

Hi there, here is the power pack I made for Spot Welding used battery ex laptop. I used this spot welding module connected to Sedan Battery 50Ah to make 3S14P from 18650 battery. Since this Power Pack was not able to fulfill the power requirement for Spot Welding then I modified it to become 3S20P 18650 Power Pack (used 60 battery 18650). To charge this Power Pack, I used Laptop Charger 60 Watt 18 V, stepped down to 12 V used step down module. This system work perfect. Have a good try. kzbin.info/www/bejne/gGTHeHh3fZeif5Ysi=_NKFF4_-BHe935r1, if you need more info, please let me know.

[@iwamus2439]

kzbin.info/www/bejne/lZyTXmhmq8d8ncksi=w4TKzJ59ydPblZke

[@iwamus2439]

kzbin.info/www/bejne/nIaTfGh7oqh4Z8ksi=EmArVaB8bAVO71WJ

[@mauriciolopez7368]

Thanks for sharing, do you know which mosfet your equipment has? thanks greetings

[@iwamus2439]

Here Is the link, May be you can find it there. The unit Is left at home, mean while I am travelling. images.app.goo.gl/X1zDeZWVEKo8sovd6

[@bitealarmtones3104]

Love the gloves

[@iwamus2439]

Thank you, good gloves make job safe and cool.

[@5b4aezmarinoscyprus71]

Question: is there anyone managed to design or download a 3D enclosure for this device...

[@iwamus2439]

I have terribly sorry no idea about 3 D.

[@5b4aezmarinoscyprus71]

@@iwamus2439 no problem I found it...

[@redbirdln254]

Can a large car battery be used to power this? 550-800 cca lead acid battery.

[@iwamus2439]

Hi, I initially used a sedan battery (40Ah) in making a power pack for powering the next spot welding. kzbin.info/www/bejne/gGTHeHh3fZeif5Y After that I used my homemade power pack (3S20P) for powering the spot welder machine. kzbin.info/www/bejne/nIaTfGh7oqh4Z8k Good luck, have a good try.

[@iwamus2439]

DX 10 plug and play unit, works great. kzbin.info/www/bejne/j2qXlmOHmc57l7s

[@mohamadrazali2741]

Not power enough, when u wel 0.2 mm up.

[@iwamus2439]

Use this KKmoon 99 Gear s.lazada.co.id/s.SzWzN for 0.05 to 0.3mm

[@iwamus2439]

Other type 99 Gear up to 0.3mm as shown at kzbin.info/www/bejne/nIaTfGh7oqh4Z8k

[@Comrade_YG]

Trash product i bought a assembled version of this from ali and doesn’t even leave a dent on maximum power and yes i have a good battery and good connections and tight screws

[@pepemartin1811]

you dont know what you are doing...🤣🤣🤣

[@iwamus2439]

Thank for your comment

[@iwamus2439]

Thanks for your comment, I am still learning. Here's another one. kzbin.info/www/bejne/nIaTfGh7oqh4Z8k

[@iwamus2439]

This is the first unit, work like a charm. kzbin.info/www/bejne/gGTHeHh3fZeif5Y

[@electronicartis]

can it weld 0.15 pure nickel strip

[@iwamus2439]

www.aliexpress.us/item/3256804834390132.html?gatewayAdapt=glo2usa4itemAdapt

[@iwamus2439]

Yes it can spot weld up to 0.2 mm nickel strip.