I bought TWO CHEAP dump trucks at an ONLINE auction SIGHT UNSEEN! Will it Run??

[@michaellynskey7124]

If you want to lose your eyes sight for good then carry one using a soft pad with no eye protection, Drills grinders welders or any engineering equipment always protect your eyes and ears, Fifty. Years in welding and fabrication I think I no what I’m talking about, Take care and look after your organs when using any equipment 🇮🇪🇮🇪🇮🇪

[@99Projects]

Good advice

[@shingerz]

Well said you only get one set look after them

[@RobertBosch-t6z]

Mystery oil

[@doraexplora9046]

Ya know, I used to do a bit of wire wheel work. Removing rust and dirt etc. The wheel was stationary like a grinding wheel. I got caught twice. I wore full eye protection, yet a broken off strand of steel wire managed to bounce off my face and into my eye ball, where it lodged itself. Twice that happened. From then on I now wear a full face shield, no matter how dorky it looks. The most panful and irritating nights of my life.

[@alfitz2189]

Turkey baster with a long tube will get the water out of the cylinders and then fill them with PB or WD and leave them for a few days. Turn the crank nut to break it loose.

[@TimTurner115]

ATF and diesel 50/50 in each one of the cylinders. And 2 to 5 gallons of diesel in the crank case. Let it set a day or two. Then try to move it back and forth.

[@franktrue308]

Pull the heads and spray down the rocker arms and valve springs PB blaster. Turn the engine and see what valves are working. Tap the valves lightly with a hamme to loosen themr. Marvel mystery oil in the cylinders. Let it sit for a week if necessary. Soak valve assembly in Evaporust if needed. I have seen stubborn pistons persueded with a piece of wood and a hammer. You don't look like you're in a place where you can pull the engine and take apart the bottom end, but that is pretty much the last resort. Good luck! Nice dog 🙂

[@99Projects]

We’ll give er another try. Thanks

[@dancinggoat22]

I love watching you make old things that people see mostly as junk work again! Fantastic. I look forward to your content. Loving your cabin! Can't wait to watch it become a home again! 👍

[@leticiasingleton4186]

Max saw the Frisbee and wanted to play with it he likes his frisbee good ole max love max🐕🥰💙💙

[@nickb5391]

@1.50, i was waiting to hear what it was, i can see what the Bedford TK (U.K truck from the General Motors group) idea came from it is so much alike, look up Bedford T.K & you'll see what i mean

[@99Projects]

The bedford is a cool looking truck. Id love to find one of them just bcuz its from the UK

[@gregreinhardt1293]

The international engines are notorious for "seizing while sitting" Couple of different ways to free up the engine are out there. Best I've ever had was clean/ vacuum the water out of the cylinders and dump CLR into the cylinders, put the plugs back into it, and let it sit for a week. If it works, it worked. If not it's time to pull the heads and start there. Also, drain the engine oil and replace it after you CLR the engine and before you try to turn it over. Good luck

[@99Projects]

Thanks for the advice I’ll give it a try

[@LisaMedeiros-tr2lz]

I get the dissolving the rust part of using the CLR, but that isn't going to lube. I would definitely start by getting an adapter to neck down the shop vac to a tube you can get in there. You have to get the water out. I think I might try a combination of transmission fluid with some acetone to free up the rings. You can use used transmission fluid if you have any to save on the cost of throwing more money away on it.

[@Railrider765]

Marvel mystery oil

[@chipps1066]

First I've ever heard that and we have run IH equipment for 70 years.

[@gengische]

I agree with Alfitz on the extraction of water. But vinegar in for a few days, to dissolve the rust, turkey baster again, and then marvel oil or pb. Big pipe wrench on the harmonic balancer, it should loose the rings, but there is the issue of the crank being possibly rusted. Same thing in the bottom

[@bertgrau3934]

I agree with the others, try to get the water out of the cylinders use some kind of oil I would suggest putting the transmission in high gear then try to pull and push the truck to see if the engine will break loose . If it has air brakes you can cage the spring to release the brakes. Trying to rock the truck in gear will prevent breaking the crankshaft bolt . Just a suggestion. Good luck whatever you do.

[@peterwatts4163]

If I was trying to start a petrol (or gasoline, to you) engine that had been sitting idle for some time, the first thing I would do would be to clean and gapt the contact points in the distributor. I would also clean all the cobwebs and other crud away from the carburettor air intake.

[@BackyardBuilder513]

For future reference on the IH COE the cab is WAY easier to lift up manually if you open both doors first

[@99Projects]

Awesome! Thank you

[@unpredictabledave3893]

Red truck motor stuck go to the fly wheel with a bar. First off trans fluid on cylinders for a week or 3 then try bumping the starter and go from there might take a while

[@JohnnyAFG81]

Great little gem of a channel! Love the intro scenes!

[@corydriver7634]

You know you’ve got a rust problem when the battery tray disintegrates when you put a battery in it.😂

[@rge2410]

Just a hint about towing with the chain. Slide the chain through a long piece of pipe. You then don’t have to worry about the towed vehicle running into your towing vehicle.

[@LisaMedeiros-tr2lz]

I would definitely start by getting an adapter to neck down the shop vac to a tube you can get in there. You have to get the water out. I think I might try a combination of transmission fluid with some acetone to free up the rings. You can use used transmission fluid if you have any to save on the cost of throwing more money away on it. The bigger issue you have is the body of the cab. It looks really bad. You are going to need a stash of sheet metal, and some supreme welding skills. Then afterwards a boatload of bondo and body skills to get it presentable. It will be a tremendous amount of work. I really might consider starting with something in better shape to begin with. Freeing the engine might still be worth doing to be able to sell the engine and transmission to recoup your cost. Going forward and looking into "barn finds", I might invest in a scope you can use to check the condition (somewhat) of an engine before you take the time and trouble of bringing it home. I would not think a seller would have much issue with that as long as you stop if the plug doesn't want to come out. However, thoroughly checking out the body work top to bottom is something you should be able to do a better job of before dragging it home. This way you know what you are getting into to. That body was just sitting there waiting for your inspection.

[@mattdanger-ny]

I love love love cabover internationals from that era. Too bad the cab is so bad. A lot of guys have luck with soaking the cylinders with a 50/50 mixture of acetone & ATF

[@mrbill8542]

That hood alone is worth $300 --well bought !!

[@davidhoffmann5737]

Drove an international just like that years ago, the 5 on the column was nice to shift

[@CC_Ent]

Battery box goes to complete nothing. Delete. Pulls new one out of thin air. Makes the truck it's very own beer bong! Lol😅 Keep going man!

[@tonyfreeman5048]

I really hope you get the binder running. Might try diesel and trans fluid

[@delmargray9379]

I once freed up a tractor engine by filling the cylinders with white vinegar. Tried many other things. Vinegar worked overnight.

[@virginiawestcot3111]

Unbelievable how you got that truck running!!

[@lomax117]

International made pretty good 345s. I'd save it, get it going again

[@davidjones8680]

I have more or less the same truck here in the UK and in RHD form too. It was one of a small batch of pre-production trucks assembled here and displayed here at the annual big truck show. However they never did end up going into full production. Mine has a Perkins 3654 diesel. It also is the exact same red colour as yours.

[@99Projects]

The diesel would be cool

[@marciabaldwin2506]

Do international have any links with general motors? The coe cab kinda has a Bedford look to me? Cool though I'm also in the UK too. Great video well done for getting it running again ❤

[@garycollins5434]

I have used a little bit of transmission fluid mixed in with the marvel mystery oil

[@andreashjulstrom9275]

Save it

[@125sm3]

Great video, nice coulple of trucks .

[@lildavidjax]

Would have loved to see this if it had been live. After where the fuel line goes in the carb, is a float to control the fuel level. if its sat for that long its STUCK! I'm surprised it actually let go without a hammer smack! You guys got lucky! Almost NEVER happens! Love ur content! Give Max a big kiss for me! And AWESOME on the clutch aligning tool!

[@corydriver7634]

Too bad about the COE but I think I’d punt especially as bad as the cab is. At least it has some scrape value.

[@scottstaudacher7735]

could always do like another you tuber did when they have a stuck motor like that. They made a chain grip to wrap around the balancer on the crank so that way it don't break off the crank bolt an you can apply a huge amount of leverage to the crank. Also fill the pistons with mystery oil or trans fluid an leave it sit for awhile but try to get the water out of the cylinders first pf course.

[@99Projects]

Don’t have anything to loose at this point

[@colinl9018]

Don't know what you did but i would part it out and cut my losses. A better truck is out there somewhere. Great dog you have there. Rottys are the best, my boy is 9 and part of the family, great with kids too.

[@richardcline1337]

Judging from the yellow paint under the hood I'd guess that old Ford is an ex-highway department truck or maybe a county truck.

[@SelectCircle]

And we gotta get both trucks to SEMA in two weeks.

[@99Projects]

That’d be tough lol

[@LisaMedeiros-tr2lz]

Good one. It is a tight deadline, but if we work all night the day before leaving...

[@janaljus12able]

First get rid of the water vacuum out the water then pour some marvel mystery oil down spark plug holes. Let it sit overnight. That should do it for you.

[@michaelours9784]

I had a truck like that old ford it was red and had a 3208 cat and an automatic transmission I loved that truck but I had to sell it last year because of some bills I needed to pay

[@dannyhoward2779]

Blow the water out with air then fill the cylinders with acetone and transmission oil drain the motor oil and fill it up with diesel and let it set for a week

[@BoonesMountain]

Nice work man! Great save!

[@garybrady9531]

Oil the cylinders down rock the engine pull the valve cover on the side you have water check the condition of the valves to see which one is stuck open maybe have to pull the valve train possibly pull the head you need to see the cylinder condition clean up the valve/head you could benefit from a solution of ATF and white vinegar to soak the cylinders it's fairly extreme but you have yo free the motor it's not dead yet just stuck

[@thetwoboyos8366]

Is the cab shell on the red international the same as the English bedford tk's ?

[@99Projects]

I don’t know. I had another guy say it looked like the Bedford

[@CycolacFan]

They look similar but I suspect the TK cab is smaller and narrower.

[@NileKelly]

Rare to see a Rottweiler being a Frisbee dog--I am impressed...lol.

[@99Projects]

That dog loves to play

[@dannyhoward2779]

Blow the water out with air then fell it up with acetone and Trans. Fluid

[@BobTassinari]

I think this video is your best yet. Love the ford ln series trucks. And your dog.

[@99Projects]

Thanks

[@JohnnyAFG81]

Stacey David rebuilt one of these years ago on his show Gearz. Would be a great place to get some inspiration.

[@bertgrau3934]

I seen that too, gas engine, 9 speed Eaton transmission. He got the engine running, then pulled the engine and transmission and put a Duramax engine and Automatic transmission in. I would have wanted to keep the 9 speed myself.

[@jerrystout3032]

Great Job Pete!!!

[@moalleboanne]

2 beautiful retro Trucks ... Better then the new styles. Regarts from Holland 🇳🇱.

[@99Projects]

Thank you!

[@WilliamOrtscheid-t5u]

Get all water out put mistery oil in let set for wile

[@norbertosoto3733]

Put WD 40 in the cylinders and let it sit

[@johnpetrucci2590]

Is that road salt with tires on it? What are the tires for?

[@garyclemons1129]

Nice job keep up the good work buddy

[@99Projects]

Thanks

[@chipps1066]

They were called Cargostars.

[@charlesbrown4765]

300 bucks wow dump truck I need old truck awesome 👌

[@phillipgarrow2297]

I would love to find a dump truck like the Ford I've been looking the ones that would work for me are to expensive

[@jeansonnea]

What online site did you use for the auction? I’ve been looking for a skid steer and a dump truck. Don’t want to get a 2nd and 3rd mortgage for them.

[@99Projects]

I don’t even remember. There’s so many online auctions now

[@jeansonnea]

@@99Projects thank you. Keep up the content. Enjoy all what you post

[@99Projects]

@@jeansonnea thank you for watching

[@HellTriX]

Evaporust in the cylinders, its not an acid, onlys eats the rust, not the metal.

[@3sparewashers-lg3gf]

7.3 swap for the Corn Binder! Lol

[@jacobbuckley8232]

if u can get the water out of the engine put marvel mystery oil in it that might free it up

[@albertcyphers1532]

I've had really good luck with freeing stuck engines with brake fluid

[@99Projects]

Iv tried that before

[@simov8chevy]

Those Deutsch plugs aren't as waterproof as you think. Regularly have to re-pin them due to corrosion caused by water ingress.

[@99Projects]

Should add dielectric grease to connections as well

[@joshuawalls7102]

That is neat never heard of a 5sp on the column. But do you just plan on taring these trucks apart like the others? Lol

[@iscariotproject]

you should buy a beadblaster with the amount of rusted stuff you keep buying

[@rangefreewords]

That 345 will be simple. I would definitely pull the rockers, rods, heads, and pan get it all cleaned up. New exhaust bolts. Pressure wash degrease, new plugs, New gaskets,oil, cap and rotor, clean points, rebuild carb, antifreeze. Good to go! 5 hours of tear down, a couple days of reinstall parts. You're not out anything. Save it. $4-500.00 project. It'll do 60mph. Smiles for miles and haul everything that you'd need to do with that Ford. Then make it roadworthy, new hoses, 5-10 gallon hydraulic, 90WT and brakes. Fun truck.

[@don6317]

Swap the engine and transmission in it with a newer model or put a 12v Cummins then swap the cab with the COE one you have sitting next to it. Make for some good content.

[@Eclipse91445]

get as much of the water out as you can then put ATF down the plug holes and let it sit

[@janaljus12able]

That truck looks pretty cool. I say fixer up.

[@99Projects]

It was a cool truck

[@janaljus12able]

@ did you get rid of it?

[@scottshugdinis2660]

I think you should part it out and come over my house and buy my Ford 850 tractor with a 713 backhoe. I dont think im too far from you. Im just wondering what got you interested older equipment. My guess is that you like to see how things work, and constantly challenge yourself. Have a nice Thanksgiving.

[@99Projects]

I’d be interested in checking it out for sure, shoot me an email, it’s in the about section on my channel page. I got started in old equipment partly bcuz iv always flipped stuff and older stuff was cheaper and then I’m really good at being poor, stuff has to be cheap to come home with me

[@pdandersondo46]

Watch Jennings motorsports. He's got good ideas as to how to free up engines in the same predicament.

[@oneillkza]

My three year old says you should fix the red truck.

[@99Projects]

That’s hard to argue with! Smart kid

[@THX-vb8yz]

$300 for a dump truck? Deal.

[@deborahplyler6528]

Sweet dog

[@gamingit1]

I know whats wrong with it, it aint got the gas in it🤣

[@Junkerclunkerz]

Vinegar and soak

[@ανακολ]

hay man you forgot to ask the warranty for two years

[@99Projects]

I always forget to get those lol

[@jacobbuckley8232]

310 is a deal for that ford for sure.

[@michaelfraser5723]

Why did nobody weigh these scrappers in when they were parked? because you all have far too much land.

[@Nicholas-d8x]

Pull the head, and oil pan, not much work, will need to be pulled anyway

[@mikegomez3673]

Release the water poor apple cider vinegar in carb

[@ericsmith2876]

I see your fur baby is deprived of attention. Lol

[@lecirus2140]

Good for scrapping!

[@99Projects]

It might be lol

[@mikestuart5278]

That engine is no good and it never will be. You need to get that truck to the junkyard while the price of junk iron is still high.

[@alfredamantijr3908]

Dump diesel fuel down the motor

[@jacobbuckley8232]

That cabover with that much water in it is junk.

[@kevinfoster1213]

Read thru the comments.. best bet is load up the cylinders, load up the wife, chain up the white truck and bump the beJesus outta it. The truck--not the wife. Good luck.. remember, we're all in this together

[@99Projects]

Good comment lol

[@alanomerle2707]

Boh....mi sa che hai comprato un mutuo.....😮

[@kenmontgomery2910]

SCRAP!

[@fatbelly2438]

pull the engine and strip it

[@toddgittins5692]

I hope you paid by the pound.

[@99Projects]

That would probably make it more expensive

[@markcoulthard4692]

pool acid

[@ManuelLuisis]

Scrap it

[@Rasputin-p4e]

Very dissapointing. You dont know how to free stuck engines. You surrender easily. Im out.

[@MikeRemillard-yq4ex]

not worth saving.

[@curtbilyeu8701]

should have kept the ford.

[@99Projects]

I’ll probably get another

[@hrxy1]

unwatchable,

[@hswing11]

DID HE REALLY DRY START THE FORD