9MM NUKES!...Unlimited Ammo 124 Grain Self-Defense AMMO Ballistic Gel Test!

Checking out some defensive 9mm ammo from Unlimited Ammo, loaded with Nuke bullets. Could these be another good carry option? Heavy clothing ballistic gel test using a Glock 17 and Canik Mete MC9!
Join this channel to become a member of The Range Gang:
/ @toolsandtargets
I am not promoting, nor do I have any affiliation with, any of the retailers or manufacturers shown in this video unless specifically stated otherwise.
All shooting is performed on a private, closed range on private property under controlled situations. Do not attempt any activities shown in the videos on this channel
No firearms or ammunition are offered for sale in this video or video description. There are no links provided to sites where firearms or ammunition are available for sale.
Good Stuff! campsite.bio/t...
Amazon Affiliate Storefront: www.amazon.com...
* 35- 50% OFF Axil Affiliate Links!*
GS Extreme Earbuds bit.ly/3VfRMUH
XCOR Earbuds bit.ly/3yVQTuu
15% Off Code For Everything Else On Their Site: TOOLSTARGETS

[@deletdis6173]

Best ammo channel since Tnoutdoors9.

[@ToolsandTargets]

Appreciate that!😎👊

[@deletdis6173]

@@ToolsandTargets And I appreciate your informative content. 👊😎

[@Bob.W.]

Ya, agree. Miss that channel.

[@zanegardner6488]

Yup

[@robwilson3749]

Easily.

[@spaceghost17]

RMR is top notch in quality (match grade) and customer service. Haven't tried the 124's... The 115's work excellent nukes, tc flat nose, and fmj . I believe they resigned the nukes a while back. My pc9, g17, gc2 and p89 love them! I've loaded and shot thousands of their projectiles. 100% American made! A mainstay here! 💪😎

[@ToolsandTargets]

😎👊

[@defiantmunitions]

As an ammunition Manufacturer I concur with you. They are top notch

[@billdye3530]

Never too hot for Jelly Time

[@ToolsandTargets]

It's gettin close!🥵🥵🥵

[@billdye3530]

​@ToolsandTargets Gen 2 in these may be interesting. Velocity was good even if expansion with separation lacked a little. I do like the fact they kept more of their base than other brands. For the cost they are worth a try. If they fail send flowers 💐 😂.

[@chrissewell1608]

Unless the Jelly Melts! 🌞🌫💧

[@billdye3530]

​@@chrissewell1608He's too quick on the trigger for that happen 👍.

[@defiantmunitions]

I’ve tested these bullets extensively and they need a minimum of 1200-1225 to perform properly in gelatin with the heavy clothing barrier. Unfortunately they then fall short at 13-14 inches of penetration. They are indeed made by RMR bullets. I’ve been using their 9-115 FMJ bullets for my range load offerings and they are hands down the best FMJ in the industry!

[@ToolsandTargets]

Good to know. I was hoping to see em open up and look all fancy.😆

[@defiantmunitions]

@@ToolsandTargets same here!

[@andrewpowers1655]

Safe to assume the factory powder loading wouldn’t support that velocity out of an 8 inch barrel? Was that a part of your testing?

[@Judge102]

What about a 16" barrel?

[@defiantmunitions]

@@andrewpowers1655 I personally only tested them from a G19 & G17

[@radomguy9678]

Are you an RMR customer? I have been buying RMR bullets for a while, watching their company grow again and again. One thing that was extremely impressive about RMR is that they never raised their prices any more than absolutely necessary to cover just some of their own price increases for lead and copper, during the "toilet paper apocalypse." They barely raised their prices at all, maybe 10%? I forget. But they kept on producing bullets non-stop and kept customers informed the whole time when some minor delays hit. I have real respect for Jacob Wilcox and his RMR operation. I am glad to see you give them a shout out here. Thank you, they deserve it. RMR's bullets are even on Hodgdon's Reloading Data Center site now, and in the Lee Reloading manual. I love to see a serious 2A company grow!! Regarding the Nukes projectiles: I bought 1,000 of the 124 grain variety a few years ago but finally started loading them a few weeks ago. Still waiting on a maiden voyage through some 9mm barrels! I do not buy a lot of factory ammo because I reload almost everything I shoot, but that's great to know about Unlimited Ammo as a company.

[@ToolsandTargets]

This is actually the first I had seen from them. I do have reloading supplies and equipment so I may have to order some bullets from them now.😎👍

[@rifleshooterchannel208]

Very likely the ONLY gel test of the RMR Nuke JHP on KZbin 👍🏻

[@CrashRacknShoot]

Im actually pretty happy with it. I have thousands of these, and dont mind venturing a bit into +p territory. Seems like these are a great reloader's bullet.

[@ToolsandTargets]

I'm curious what the "2.0" is gonna be. Might just be a different loading from Unlimited.🤷‍♂️

[@rbur394]

​​@@ToolsandTargets thanks for another entertaining video. I have a request for future tests if u get a chance to pick up some aac 75g bthp 5.56 and aac 77g otm 5.56. I can't find any gel tests for them anywhere

[@bewbew0016]

​@rbur394 I'm pretty sure "Mr Gunsngear" has a gel test of their 77gr OTM. I'm 99% certain. I also believe Buffman Range did as well and included velocity and practical accuracy.

[@rbur394]

@@bewbew0016 all I found was accuracy tests for them, and the aac 75g sierra match grade is tested but can't find their 77 otm or 75g bthp

[@BarbosaUral]

Well, when you have 9mm bullets that expand to .50 caliber and retain mass, I think that's not so bad at all, even if they open fully.

[@ToolsandTargets]

True

[@theviolator818]

Love how straightforward is channel is.

[@orpheus280]

"Oh wow, what a powerful sounding name! I bet these things are crazy!" "...oh, no, they're standard pressure 9mm with a lackluster projectile." Very convincing marketing, I'll give them that much.

[@ToolsandTargets]

Seems like marketing is better than the product with a lot of things these days. Sig, for example, has mastered this art.

[@yomomma107]

Great test brian I've never heard of this company but im really impressed so far Think I'll pick up some for my carbine.

[@ToolsandTargets]

Curious to see these out of a carbine myself.

[@ronaldbenskin493]

I use the 115 grain nuke at 1400 fps + out of a czsp01. At that speed, on hog carcass anyway, they blow up and only travel about 10 inches. Keep up the great work 👍

[@ToolsandTargets]

Nice 💥🐗💥

[@semichiganandy2127]

Thanks, these were OK. Not great but decent. I hope you eventually get some of the 2.0 version.

[@DanielMartinez-lz3ot]

I would be happy with those, not the best, not the worst. Too bad they are limited, but I am gonna keep an eye out for the "2.0" version.

[@ToolsandTargets]

😎👊

[@kens17761]

Jelly time is always a good time!! Stay cool T&T!!

[@ToolsandTargets]

💥😎👊💥

[@caleb6988]

Wouldn't mind having some of them.

[@ToolsandTargets]

😎👊

[@markcerajewski5709]

The RMR 9mm Nuke 115/124 grain was remade to open more easily at 1k fps

[@CrashRacknShoot]

I'm really curious to know if these were the gen 1s or what is currently on offer. I know the first hp RMR made was just called the "MPR," or multipurpose round. The new ones took the "Nuke" moniker. Still, even looking head on to the bullet tip, I can't tell which it is. Still though, I got a few thousand of these things in reserve, and now I don't feel too bad at all knowing that if I give them a couple tenths of extra space, they'll work very well if need be.

[@TUKByV]

I'd try some.

[@ToolsandTargets]

Cheap enough

[@ion123456]

You should look into this 185gr 9mm from Seismic Ammo. They call it "QuakeMakerTM +M 9mm NATO". There are no videos on YT that actually have a meaningful display of the ammo, pretty much clips of people shooting it, or just talking about it (no jelly, no chrono). It's possibly a good option for suppressors, due to its lower velocity.

[@ToolsandTargets]

I keep checking on that ever so often but it's always out of stock.

[@danperry3116]

I would guess that the bullets lost the jacket pieces right where they turned around. At that point they were expanded and that parachute caused them to turn. Price is enough to get me interested.

[@scottsteeves]

I just bought some, great price right now.

[@murphymmc]

Your tests with the heavy clothing on the gel separates the sales pitch from real life. Unlimited Ammo website shows a nice, beautiful expansion. Your test indicates they used bare gel. Another great test.👍

[@ToolsandTargets]

Thank you sir. The cloth really does throw a major curveball.

[@kerino1]

Tools - these are a new one to me. Another fine test, Sir! And RESPECT to Alan for all of the interesting ammo he sent in!!

[@ToolsandTargets]

Same here. Appreciate you!😎👊

[@CeltKnight]

On clearance these are now "budget" JHPs and frankly, seem to perform as well or better than a lot of other budget JHPs. For the price, heck, I might pickup a few bags. Better than FMJs.

[@ToolsandTargets]

Yep

[@keganwallace8753]

Expansion and color of the lead core from these projectiles reminds me of the bullet wounds on the T-1000 from Terminator.

[@coloradoguns]

Can never get enough of the ballistic tests ! Keep em coming brother 👌🏾

[@ToolsandTargets]

Appreciate ya!😎👊

[@usafammo461]

I've ordered the 124gr Nukes from RMR. I wanted these so I could load up some cheaper SHTF bullets, that can still get the job done. If you don't see these on the RMR site, it could be they are temporarily out of stock. BL, they are the makers of the Nuke projectile.

[@ToolsandTargets]

😎👊

[@bobwilson758]

I have never seen this ammo - Looks pretty good . Thanks for the testing !

[@ToolsandTargets]

Same here. I got some more stuff today that I've never seen.

[@steelpunisher6944]

Interesting…. I think they could have real potential with a little tweaking from Unlimited. Not a terrible result but I’d bet +p might be the ticket. I’ve ordered and loaded thousands of bullets from RMR but never these. I might have to play with some. Great info as always my friend 👍🇺🇸🇺🇸

[@ToolsandTargets]

Thank you sir. They look very cool, expanded.

[@xringarcher1440]

I have been interested about this company for a while now. Somehow I’ve gotten on their email list lately so they’ve been sending me promo emails and such, doesn’t look too promising for these Nukes, but they’ve also got a different hollowpoint named the “Raptor” which are solid copper and I believe frangible in some form or fashion. Wouldn’t mind a test of those either!

[@ToolsandTargets]

😎👍

[@CrashRacknShoot]

HEEEELLLLLLLL YEAH, BROTHER! Been waiting for this, good or bad! Thank you for testing it.

[@ToolsandTargets]

💥😎👊💥

[@carlsorensen8360]

That bullet looks like it might function very well out of a 16-inch carbine

[@docgunn286]

Excellent, as always. The 124 NUKE has a FAT ogive that needs to be loaded to a short oal (1.060") in order to fit barrels with short leades. Loaded to 1.120" it will not fit Gen5 Glocks nor a few European pistols. I loaded some 124 NUKES to 1.120" and they were only around 1090 fps from a 4.0" barrel. Subsequently shortening the oal to 1.060" not only made it fit into all our barrels, it also increased velocity to 1200 fps. RMR claims they will expand through bare gel at 1000 fps and through denim at 1100 fps. Your testing confirms this. Like you, I think they'll do fine at a +P velocity of 1200 fps.

[@CrashRacknShoot]

I load them to the same OAL. I actually had both my 9mm pistols reamed to make sure they fit rmr bullets lol. Chonky boys. I love their stuff. And now that I see how well they work, and will definitely work better with a little extra pep, I certainly don't feel bad with the couple thousand I have in reserve. I'd love for Tools to find a company loading their 69 gr. 223 hollowpoints as well. Tried getting him to shoot some of my reloads, but he (correctly) doesn't shoot reloads unless they're his own or he knows the person personally, which is a totally reasonable approach. I'd do the same.

[@docgunn286]

@@CrashRacknShoot They are very accurate loaded to 1.060". That's the correct c.o.a.l. for the 124 Nuke loaded as a 9x19mm. It is very unwise to load a cartridge that might not work in ALL your potential pistols. (I have not loaded it as a .357Sig, thus far.) THE OTHER IMPORTANT LESSON from my original post is how pressures rise as cartridge length is shortened.

[@CrashRacknShoot]

@@docgunn286 hence why I said both. Meaning I have two. And that's what I load them to. Had I not reamed one of them i would have been at 1" flat. Not ideal.

[@tamadrummer001]

This is what I was asking you about in that live stream a couple Weeks ago. The 2.0 isn’t the projectile but the case is now in nickel plated brass and they are stamped +p but not sold as +p. Edit: I am definitely disappointed in the results. I will run them in my pcc. I don’t think in a pistol they will perform as good as they should.

[@ToolsandTargets]

Ahh, that makes sense why the actual bullet maker doesn't mention anything about a 2.0 version.

[@AxiomsMedia]

Heatwave making its way around. Great video as always,

[@ToolsandTargets]

Thank you sir.😎👊

[@scottmorgan1016]

I reload the RMR projectile in 124 grain i run them hot. Out of my TP9SF Elite my chrono has an average of 1190 fps. No jelly test but accurate. You do superb work sir

[@ToolsandTargets]

Appreciate that, brother.😎👊

[@markjones2859]

Brother, I just love what you do. I just got into your channel a yr or so but I'm now a huge fanboy. Keep up the great work 👍

[@ToolsandTargets]

Appreciate that!😎👊

[@ronaldbarnes8302]

Haven’t heard of that type of ammo before. Decent performance. Thanks for the jelly test Tools!

[@russellridge8623]

Not terrible. Maybe that’s why they’re on sale. Get what you pay for. Better than FMJ for sure. Have a nice weekend!!

[@WayStedYou]

People said they are on sale because the 2.0 is better down to 1000fps to open up so clearing old stock

[@jasonshults368]

I've ordered a lot from RMR, and highly recommend their projectiles. From my tests, these 9mm bullets do exactly what I want them to do. I carry them, as does my wife. I use their 147 FN in my 9mm woods loads. Accurate!

[@mekkanic1979]

Good tests! Would be interesting to compare with the Unlimited Ammo Raptor 9mm .....I don't see a lot of test on those .....

[@JoeA418]

Usable in a pinch would make great practice ammo and getting to know and understand the hollow points characteristics, if thats all i had or could afford i would load them up it preformed decent and would get the job done.

[@scarifrougeone7225]

Another good test and commentary. Pretty much agreeing with you Tools. Never seen this ammo before. I kinda thought they would definitely expand of fragment. Good velocities. Middle of the road there. $9 per box is good they are worth that I would say. Be safe thanks for sharing. Nice update on the XCOR hearing protection. Looking forward to that XCOR review. 🇺🇸⭐️🇺🇸⭐️🇺🇸

[@richarddixon7276]

I bet these "Nukes" would do a great job in Your Henry Homesteader , the potential extra velocity should help with the expansion . Thanks for another great video , see You next time . Shoot Straight Stay Safe & Stay Well.

[@charlesr.aliffjr.4050]

I always enjoy your videos; you do a thorough job. As far as JHP ammo goes, I still think Federal HST is the gold standard followed closely by Speer Gold Dot. If Federal would increase the velocity a bit on their HST line, they would really have something. As it currently stands, IMO, Underwood Xtreme Defender ammo is top dog.

[@rico300zx]

Interesting petals they look sharp

[@2aTriggernometry]

RMR is a great company with high quality projectiles. I just wish they carried subsonic weight 300 blackout projectiles. The 124gr nukes are awesome!

[@josephpacchetti5997]

Thanks Brian, I believe I'll stick with Federal on the nine mil, stay cool, this is going to be a hot weekend down here as well, 97-98 👊🇺🇸

[@ToolsandTargets]

🔥🥵🔥

[@Adam-nv9zo]

Another great test, as always, brother.

[@Bob-lq9ys]

Not great but not bad, better than some that you have tested, Thanks for sharing

[@ToolsandTargets]

Yep

[@kevo-o-o]

I would love to see how you pull the bullets out of the gel. It would probably be a satisfying, less disgusting version of pimple popping

[@HighRoad317]

I much rather see a heavy clothing test than a plain gel test!!!

[@edwardstephens936]

Thanks for doing the test, I was wondering about these... I appreciate you.

[@ToolsandTargets]

Thank you sir 😎👊

[@truthhurts7836]

Appreciate all the videos. Stay 😎

[@ToolsandTargets]

Thank you sir.😎👊

[@jamesJohnson-qe4gw]

Your 1 liners hit harder than any bullets

[@ToolsandTargets]

+P 😎👊

[@donniebaynard8430]

Love your videos. I only have the bell indicator turned on, on two channels. You are one of them. You need to do another stream. Loved it. 25acp > snukes

[@shakennotstirred32]

Living the dream over in VA? Send some of the love to KY 😂

[@ToolsandTargets]

Over here sweatin.🥵

[@mikes1097]

@@ToolsandTargets Another Virginia guy here

[@shakennotstirred32]

@@ToolsandTargets Us too!!!! I think todays high is 96 here in Louisville.

[@ratagris21]

Thanks for testing these Tools! From what I've read on tte reviews they don't work well in G43X. In any case, for the price these are better than those old skool pre Tools tested Sierras.

[@ToolsandTargets]

😎👊

[@markcerajewski5709]

I thought this was about the projectiles from RMR … the 9mm Nukes in 115/124 grain I use them and could not be happier But the company that made that ammo use commercial grade powders that are most likely house blend powders that while they work ok across a verity of calibers they but not caliber specific. So when hand loading these nuke projectiles you have to pick a powder that was designed to work with these weight bullets and you can do that with commercial grade canister powders I use VV due to it’s consistency and clean burning and right now VV powders are about priced as Power Pistol

[@ToolsandTargets]

😎👊

[@Sentry1835]

Great video again, love your format of your videos., you don't bloviate or try to crack unwanted jokes..... Like other ammo reviewer's do You cover all the wanted ballistics and technicals in a short concise video Thank you.

[@dereksp6785]

Id like to see you do a 22 ammo test out of a ruger lcp ll 22lr , beretta tomcat or similar micro 22. Thanks for the great videos !

[@ToolsandTargets]

I have something in mind for that.😎👍

[@texasbeast239]

The expansion looks like Stranger Things Demogorgon's face.

[@dlstanf2]

As well done & informative as your videos are I find it difficult to believe that you are stuck at around 75K subs. I’ve been with you since your early days.

[@ToolsandTargets]

Growing at the same % rate as always every month. It just seems to go slower with bigger numbers.😆 I could flood the channel with clickbait trash and shorts just to see a bigger number, but those type of subs don't watch anything but clickbait trash and shorts so it would do me no good. Most of my longform videos get 2 or 3 times the views of a lot of channels that have 5 or 10 times my subs because they got them from trash content. The main problem is that YT only promotes gun stuff to a small specific audience so until you get a nice sub base, you're at the mercy of the YT garbage algorithm.

[@WhiteoutSnowy]

Nice , could be great options for budget 9mm rounds. I will look into this!

[@ToolsandTargets]

😎👊

[@RichiesHouse]

All ammo is dangerous, not being ready is even more dangerous.

[@joemokrzycki2006]

Congrats on 77 k Brother

[@ToolsandTargets]

Thank you sir!💥😎👊💥

[@allenbolen9705]

Not terrible is not what you want for your self defense ammo! Thanks Tools 👍🏻

[@ToolsandTargets]

This is true, but it is better than terrible.😂 Appreciate you, brother!😎👊

[@donakahorse]

You're a lot more kind than I am. I see a projectile that disrupted because it was tumbling, terrible expansion. if it hit a bone it would be deflected easily. garbage. lol Thanks for testing it though! have a great weekend

[@ToolsandTargets]

Thank you sir. I guess I've seen so much straight up trash at this point that even "meh" performance starts to look decent.😂

[@donakahorse]

@@ToolsandTargets nah, you're good, if we agreed on everything there would be no point in watching. It's better than a lot of stuff out there, but I tend to look at it in light of "would I use it" and the answer is always no if it doesn't expand or penetrate. I don't want to have to end a life, but if I pull that trigger, there can't be any question of what's going to happen.

[@furmanmackey5479]

Guess I'm going to have to pay Unlimited Ammo a visit via the world wide web and see what other calibers they have available. I have a sneaking feeling that the bullet design would perform a lot better out of a four-inch .357 Magnum or maybe even in a .38Spl loading. Come to think of it, I would love to see what would happen with such a bullet, 130 to 135Grns, out of a pistol chambered in .38 Super.

[@misterfister7262]

Thank you so much. Never even seen this ammo but I love the options and results you show everybody. Sorry I'm a poor or else I'd donate.

[@ToolsandTargets]

Watching the videos is plenty, my friend!😎👊

[@sertank735]

Best ammo testing channel. Frog horn leg horn with a block of jelly.

[@adamadams6740]

Like to see these out of a 6inch PCC or with more powder for sure.

[@VroomNBoom]

Man id really like to see you test out the 22 tcm

[@chretired]

Interesting results Tools. I guess that explains why they are coming out with a 2.0 version Have a great weekend. Be vigilant and always be safe my friend.

[@ToolsandTargets]

Thank you sir. Makes me wonder if the "2.0" might be +P.

[@curtisbottoms3316]

RMR did update their round to open at slower velocities because this was an issue. It mentions this in the description. I use shell shock cases so I can load these +p. Luckily I discovered after they updated the projectile.

[@ToolsandTargets]

Interesting

[@neptunestrident4364]

Been very hot 🥵 and humid at my location as well. I’ve done some shooting but it wasn’t that pleasant

[@ToolsandTargets]

Yeah, especially if you don't have some shade. It's rough.

[@yuvgotubekidding]

Can’t expand if it breaks apart along the way. That’s the way the cookie crumbles. 👌😎🇺🇸👊

[@ToolsandTargets]

💥🍪💥

[@williambaker1753]

They are on clearance and cheap for a reason but for the price I would pick up a bag or two how many come in a bag 20 or 25. I'M gonna jump on the sight and check them out probably grab a few bags. Can't wait for the 2.0s to come out hopefully they push them a little faster or change the design of the projectile will have to wait and see.

[@noneyabiz8225]

would probably be a good PCC ammo with higher speeds from a longer barrel

[@raybo34]

Great test. Appreciate you out there in this heat bringing us some good content.

[@ToolsandTargets]

Thank you sir. It's warm for sure.😆

[@Ughthisagain]

For 10$ a box I would use these at the range for JHP practice. But they are sold out. I’ll have to look for the 2.0

[@hoffpbass]

I kind of like irregular expansion -- causes unpredictable damage, which can be good. Then again, I just made the case against it, too. 😅

[@ToolsandTargets]

😂

[@craigmyers5569]

I bought 1k RMR 124gr Nukes recently but hadnt loaded them. I wonder if Unlimited used their older design that needed more fps. Thanks for testing these. If possible it would be great if you could test Unlimited 2.0 loading to complare.

[@jeffreybean5363]

Interesting ammo test Tools 🇺🇸👊, I'm thinking if they had more sauce behind them like a +P they might have a better result.

[@ToolsandTargets]

💥🔥💥

[@terryrichards8645]

Thanks for another great video! 😊

[@KennethRisner-fz9sc]

looked ok to me. About the same results I'd expect from a hornady critical duty

[@ToolsandTargets]

Yep

[@danieldixon7595]

I wonder what these would do in a carbine? Maybe a little extra velocity from a 16" might help with expansion?

[@bobbarker5884]

Love it!!! Never stop "Jelly time"!!

[@05Rm250RideAlong]

Love ur content man, do you have a video of southern munitions hybrid HP 124gr?

[@artwebb6939]

For what they're asking you could buy it and use it as range ammo

[@Gator69420]

Thank you so much dude for what you’re doing!

[@davidfielder1418]

Great test good information. Good price.

[@paulfrevert3662]

It would be cool to see what they do fired out of a carbine

[@ToolsandTargets]

😎👍

[@charlesmorgan1879]

I've not heard of these til now , good price tho. Thanks for info .

[@ToolsandTargets]

😎👊

[@backh00d]

The best ballistics reviewer on the tube

[@chriswalsh9989]

Glad to see your video show up today, i missed seeing the wed wall video this wk. Was hoping everything was ok. Far as these go seems like they might be a decent back up ammo for shtf especially at that price or maybe even out of a carbine?

[@ToolsandTargets]

Appreciate ya. Didn't get anything done in time this week. Dealing with YT holding everything up on top of it.😆

[@chriswalsh9989]

@@ToolsandTargets ah, i wondered if this new YT BS was affecting things or not. Such a load of crap, anyway just glad all is well. Thanks Tools

[@147CombatMedic]

Couple of dirty bombs vs. full-blown mushroom clouds 😄 We'll have to see what the H-bomb 2.0s bring to the table. 💥🍄💥 Can't complain about those clearance prices, though 👍

[@ToolsandTargets]

💥🍄💥

[@twitterjackedmitchell8096]

Were you able to do the Nuke 2.0 tests??

[@ToolsandTargets]

I haven't gotten any of them. I'm not understanding what the difference is because they don't talk about what any difference is and I'm pretty sure the velocity they show for them is lower than the first ones.🤔

[@TAWier]

I wonder how they would perform out of my Beretta CX4 Storm or my Kel-Tec Sub-2000.

[@chevrofreak]

I was wondering when you were going to test some RMR bullets. They are super accurate and very reasonably priced. I load the 124gr Nuke in 9x25 Dillon.

[@ToolsandTargets]

None if it around here so I'd have to order it online.

[@chevrofreak]

@@ToolsandTargets I have been reloading their stuff ever since I got into reloading over a decade ago, but not a lot of companies seem to be loading their JHP's. Eley loads their FMJ RN in their match ammo. The predecessor to the Nuke was just the MPR and it did very well in bare gel. I could load some up pretty hot (+P book load) if you want to see what they do at higher velocity.

[@withoutprejudice8301]

Curious to see how they'd do out of a PCC with the additional fps gain.. Might have to try them through my Gen III S2K.

[@ToolsandTargets]

😎👍