PETERBILT 379 6NZ GETS MAJOR CHANGES & UPGRADES!!!

[@mrymkos]

Greg just loves playing with his Peter

[@yepitsme2536]

(Cough) bilt

[@isuckm8887]

Indeed

[@billneely7525]

You can convert the sleeper from a bunk to a bench seat with seat belts . It would make it more practical for you since your trailer has a sleeper birth .

[@jesserasso1042]

A I'm gonna put a 60 inch tv in my sleeper LMAO 🤣

[@jesserasso1042]

A projector screen yea come on

[@jamiewilliams5673]

The piece on the compressor is called a pressure relief valve or "pop off valve". And in my opinion, I'd get rid of the backup alarm before the next video.

[@superiorhotshotservicesllc2831]

WASH THE PETE!!! The hand prints, and new clean shiny parts being put on a dirty truck is driving me nuts!!

[@bryantglass9623]

Did Micheal go to Greg’s shop to fix his transmission and just never leave? Is he allowed to leave? Is Greg holding him hostage?

[@dazzleyd]

I think michael is doing all the fabrication and greg does the bolt on parts

[@HoffmanOutdoors]

Makes ya wonder if Silent Mike is even co-owner of Kingspeed anymore...how can he possibly have time to step away from his customers? Something fishy here...

[@Straight6Addict]

@@HoffmanOutdoors yeah, I was coming to the comments to see. I didnt know micheal was co owner of kingspeed. But I was wondering if he quit and is like working for Greg now. Or because of covid kingspeed is super slow right now and micheal has no work to do there.

[@dodgezilla1012]

The Pete would look good with fiberglass teardrop fenders😎

[@Itsatoddlything]

Get you some 24.5 wheels and sheet metal in your frame with some chicken light 👌🏽👌🏽 be one clean unit

[@joelevans9720]

Paint the hubs front and rear black and spiked black lug covers all the way around. No center covers front or rear, old school look with the coffin bunk and flat top. Diggin the truck it’s really coming together!

[@joshuayoung3988]

Love the truck.. looks like a different truck.. I really like how u get down to the small things to pull everything together.. I’ve watched ur videos for years now and u have made me be very good at doing the small things to each project

[@bradthacker9904]

I dig the spikes not sure about the center covers though.

[@vintagespeed]

put a check valve after the air compressor to the system, so it can't leak down after charging.

[@jackhowlett7413]

Truck looks great!!! I think the polished oil bath caps are kool on the front

[@noelybarra1769]

That Pete’s going to look good rolling down the road with the race trailer 👀

[@Straight6Addict]

Besides the race trailer is too small for it. Lol

[@rickymitchell7586]

This build is coming along nicely, spikes are good. Truck looks awesome

[@80sfordguy]

That 6NZ can be turned up to 600-650HP & 1900-2000 lb-ft or rebuilt/converted to a C16 to as much as 750-800HP & 2200-2400 lb-ft. That’s gut wrenching power and torque still considered stock HP & Torque just for a different application that can still be useful in your truck, just make sure your Eaton 18 speed is rated for that input.

[@hunterbond1902]

Absolutely in love with the Pete after the drop panels! Now you need some of the full rear fenders from WTI. As far as the lug but caps go, I also think the cylindrical caps would look good too! Great work fellas, keep it up!

[@mattlogel8567]

Absolutely love the spikes. I can’t even believe your contemplating it. You do spikes on everything hahaha

[@NotYourUncle]

Patiently waiting for Greg to wash this behemoth 😂😂😂

[@jchefboyardee]

That is a Super Nice Build! You will be envied when complete.

[@glennrobichaux7490]

Had spikes 10 years ago. Like the 3" tall cylinder covers now. No center cap with chrome oil bath caps for the wheels

[@codybettack2227]

Top hat lugnut covers would look awesome on this truck with no center covers. Love the truck so far doing a great job Greg looking forward to more of the rig. 🤘🤘

[@kygambler22]

Those side skirts need lights in the bottom flanges........the horseshoe brace behind the oil pan needs lights in it also......that Pete is taking shape now....good job boys....

[@Shakira_6.0]

Greg please seriously concider this. Every year in July, usually the second weekend, there's a truckers jamboree up here in Walcott Iowa at the I80 truck stop, (aka the world's largest truck stop). PLEASE bring it up to the 2021 truckers jamboree. Id love to see this truck in person when it's done and id love to meet you

[@psavel274]

Awesome you took my suggestion on the sleeper lights!👍 Those drop panels really set this thing off and makes this Pete look super clean. Great work dood! 😎

[@gaiaalfa9949]

Very nice, like how its turning out.By the way I'm pretty sure that the peterbilt 389 doors will fit your 379 you should get them since you have the newer sleeper and since you want to modernize the interior they would be a lot nicer, look them up they will be a nice touch for the truck.Keep up the good content.

[@k.t.c.t.c.4104]

21:50 hey I havn't seen that black beast with stacks in action yet! is there any vids in action of that stacked truck?

[@Slay_Reese]

Just a tip, when you were hole sawing the foam, run the drill backwards, the sharp teeth won't catch and it will still cut it, works well if you are cutting something that already has a hole and u want to make it bigger. Love the content

[@bradmyers3327]

Yeah......the drop panels look dope! Need some more lights under cab and sleeper

[@ryanc8188]

You need to see if you can fill in the gap between the cab and the stacks under the sleeper. I would go with some flat top lug nut covers to go with the flat top stacks

[@jamescrouch8783]

I like the wheels just like they are with the spikes, drop panels are making the truck. Thanks again.

[@bernhard8540]

That truck would look so good with plates to fill in the open frame and a low profile spot for the air lines and trailer hookup

[@MokanaMelodious]

Spikes going to look better once that rim is polished up.

[@beardeddad74]

Looking good every time we see it. Can't wait to see what you do with the interior...

[@mdlipps]

That truck is mint! I love the spikes they look mean.

[@woolmanworkx1144]

The spikes look good, I usually like the top hat style but your Pete pulls the spikes off very well

[@kevinsiegele2106]

Love the spiked lugnut cover look, if this truck was like another foot or 2 longer and a bigger bunk it’d be killer in my eyes but so far I love what you’re doing so far, can’t wait to see what you’ll do next

[@hd42gaming54]

Anybody else at 0:20 say damn that combo is gonna look killer rolling down the road!

[@bobsullvian3274]

Spikes and big holes are a must they look so good

[@drivewaydiesels]

on the air compressor fitting just take it out and pipedope it and bam air leak fixed. its also struggling to build air because of the random air leaks here and there. so id get those taken care of before slapping a new compressor.

[@pscycle]

Sleeper berth is 2015 or newer. The older berths just had a small door what is like on your passenger side. The newer berths with the full doors are so much nicer being an over the road driver,parking on summer nights and being able to pop thatdooropen for fresh air. Also in case of a fire and being able to get out!!!

[@jasonhira4671]

The Pete coming together nicely mate,I like the spikes on the front 👍🏼.drop panels looks mint👌🏽

[@bryiarvernier7914]

Entire rig looks amazing

[@Skillet4491]

Love the spikes and covers!

[@austinheard6074]

I’m with everyone else. Please do a Greg A Deleon the backup alarm. As soon as you said you was changing up the front lug nut covers I was really hoping you had spikes and you did, 2 thumbs up

[@Wickedtrucker75]

Yes! The billet oil caps

[@matthewhite1699]

Lug nut covers are called top hats that stick out and flat. They are available in chrome or black

[@IMCABLETV]

Greg I love this truck! It looks killer and sounds the same! I will be crossing my fingers for paint matched full rear drop fenders

[@dustincanale184]

I would put sound deadening material in the hole sleeper and cab. The Amazon stuff is great

[@robertwebb539]

Looks very clean! Spikes aren't terrible...

[@firefighterrobert134]

I like the way it the wheels came out once you guys polish them it will come out killer I say keep the spikes and hub covers on

[@ansonhackett9791]

YESSS!! THE SPIKE LUGS LOOK KILLER ON THERE!!!

[@dragonwolf0610]

The truck is looking really good like the spikes but i do have a suggestion since your thinking of updating the light to leds then i would also change the brake lights to leds also much brighter and would overall looks better then the bulb style in my opinion

[@turbomania4436]

Missing 1st gen videos but still liking the Pete project getting done👌👌

[@jasongregory3561]

I like the old school look on the peterbilt 😍

[@jasonmyers3847]

To make it look right, it needs full fiberglass rear fenders. Painted black, of course. The frame would look stretched, too.

[@robertbond3617]

Love the the spikes and the drop panels

[@trucka4205]

Spikes awsome front oil caps in chrome would be slick

[@airsoftsnipes100]

wide tire front would look cool, not sure the name but dump trucks, heavy haul and concrete trucks typically run them

[@smcox1991]

God damn those stacks are huge 😂 I think I would chop at least 20” off. Definitely need to paint the fuel tanks black. With the polished straps they would look killer. It needs 4” cylinder lug nut covers.

[@Sargen013]

Hate the spikes, love the billet oil bathers and a classy lug cover.

[@timgiven3826]

Top hat covers look good, for the lugs and the bolts on the frame

[@kevinkruegar6802]

Love the spikes! Keep em!

[@davelemmen4283]

would look verry nice if you build some lights above the airtanks so they light up at night. also clean the front wheel hubs and paint them...in the netherlands we als do that it looks sick

[@bigdreamsonsmallacres]

I swear it’s like an episode of The Office with Greg yelling ‘Michael!’ 😂

[@timothysmith2465]

I would put a light on each side of the bumper on the bottom.

[@travislesmeister1123]

You should get train horns, 18 speed, and window chops lined up with your visor.

[@adielcerriteno1990]

Just needs some drop fenders to match those panels!

[@classyjeremygaming]

The old u should do bad ass 4link kit I am really excited for that build should start on that truck soon bro love Pete build keep them coming bro

[@Daves_adventures4315]

Oh yeah wheels look so much better with the smaller caps and spikes

[@MjK931]

make sure you check the butter bearings on the muffler system right

[@hayhustler5865]

The spikes look better than what was on it but I think the top hat nut covers would look the best

[@chrisslayden8870]

Billet hub oil covers

[@marioregalado3129]

What size of holesaw did you use to cut out the holes in the sleeper? I want to add more lights on my sleeper of my pete as well.

[@Thunder-iu6ev]

Pretty sure they're 4 "

[@warringwarthog]

after a little work i used a volvo hood latch on my pete. it really confuses people nice clean look the only thing good about a volvo

[@outcold1982]

Bet some billet oil fill caps for the front hubs will set it off!

[@tuckerscherbarth9506]

Now you that truck was pulling a step deck trailer with three Cummins on that damn you’d have a dream rig

[@SoldierforJesus777]

Did you consider the amount of drop the cab will do when bags deflate

[@hunterprowsemrereviews9141]

Awesome awesome video Greg A, love the new upgrades to the Pete! Now time for black double hump rear fenders lol.

[@IMCABLETV]

Same bro same

[@chriswolley7596]

Hi love the truck! I was wondering if you have lowered the front at all? Also what rear suspension do you have and tire size? I'm currently building a 1994 379 day cab and really like the way your truck looks.

[@michaelmurphy8521]

It is on the way to you as we speak... truck is looking killer

[@logankorten3867]

I wouldn’t put the style hub cover you took off after being on the rim for a while it wears in a circle around the rim

[@stuartmorey870]

Love the dirty Pete vids Greg. Keep em comin.

[@jmartin8604]

HELL YES on the spikes!!!!!

[@BigTyler]

The oil hub caps do not come polished you have to do that your self. Test and check your unloader valve in your compressor might fix your problem. Good luck truck is looking awesome

[@glennrobichaux7490]

No you can buy chrome oil bath caps.

[@cedriclee-carter8809]

Sleeper window visor windshield chrome trim single cb antenna and under glow

[@tsimmons1974ts]

Every Largecar needs a hood swan 😎😎😎

[@chrisluloff4861]

Love the spikes!

[@brittonseay2639]

Get a piece of diamond plate most likely chrome or black and put it all the way down on top of the frame rales or in between ish and if you have the means or capability get a larger rim size

[@jordanb1960]

They make “inserts” to go in the holes on the rims, you could get black inserts. Just to see how they look maybe?

[@davidcoronado9184]

I think with the spike lug nuts do the center spike cover

[@bullhauler3120]

16:07 don't worry bubba... your not the only one who's done it.... hahaha

[@Cmbcw]

Love the spikes 🤙🏻

[@anthonygomez7984]

Hey Greg, you gonna polish the fuel tanks and front grill?

[@kylnnivy-bailey826]

24.5’s mega holes with spikes is my favorite

[@CarsTrucksWhatever]

I like what the Pete has become so far but I like bigger sleeper on trucks and plus you have room to move around in it too

[@kennethives2517]

Are you going to fill the wholes in back of cab and frame?

[@woodyharrell7921]

Absolutely love the whole truck 🤩

[@jeremywest9836]

Man, she's really looking good

[@austindriskell1545]

Smooth deck plate would like good too

[@1995peckro]

The drop panels need lights love the spikes not the centers... she needs washed and needs full fenders over the rear tires.... but.... damn I got a cdl and would love a chance to play with her.