A&A Supercharged LS3 C6 Makes Killer Power! | RPM S8 E47

[@JGrek]

Performance shops with integrity are hard to find.. much respect to you guys, Crazy to think they quoted him for a new motor with a rattling cat...keep up the great work.

[@adams733]

MAY THE LORD BLESS YOU....Coming from a guy who had a “performance shop” replace the motor in my GTP in 2007 to find out that it was just a messed up cat.

[@baby-sharkgto4902]

I hope the camera guy gets a lot of love in the shop and in the comments. He does a great job!

[@RaceProvenMotorsports]

Zero love in the shop.

[@baby-sharkgto4902]

@@RaceProvenMotorsports hahaha yall crack me up! Another great video (in part via the camera guy)

[@iyfphoto]

I am fairly certain, that if I take my C6 any farther...I will ship it to RPM. It is just a cam behind that one. Thanks for the killer content. Top notch videos and general conversation...very entertaining and informative.

[@stinknyc8041]

Mechanic.....inventor.......singing sensation .....mustang Matt 🤟

[@offdatgogo]

11:42 "D.Y.I. that's how it's done!" 😂😂😂 Never thought I'd enjoy watching a bunch of guys working on vehicles this much even though I'm not turning a wrench. ✌🏾

[@buda18]

lol same here!!! these dudes are geniuses.

[@tonyfranco516]

Nothing like cam chop in the morning. Good day from Burbank!

[@georgem.6136]

That V made big power!! Can’t wait to see the ZR1 with the 2650 from Kong

[@michaeln.7083]

Love when you say Codys broke...Fran said it runs 8s,.. gotta pay to play!! I'm still looking for a "good" C6 ZR1 keep it up great work!!!

[@transam2002ws6]

That gen3 Cadillac CTS-V is a monster. It's crazy how many shops will tell a customer what they assume is wrong. Without actually going through to verify. Even though RPM has a policy of non putting people on blast. These videos are evidence enough that you get what you pay for. Especially when you are looking for cheap. Instead checking to see if the shop knows what they're doing.

[@adamc8409]

Luber up and slide it in! Its all about the cam shot!

[@petercarey6883]

It always pays to get a 2nd opinion. Keep Dr. Fran on speed dial. 👍😉

[@deadwabbit2287]

That CTS V was absolutely beautiful

[@ninja3000gt]

Buddy just had final tune done on his C6 with A&A supercharged LS3. 18° timing at 25psi boost. Made 978whp 854ftlbs

[@pnwc6980]

What pulley and rib

[@Dasher904]

Definitely fully built engine and a ysi supercharger

[@robertwerner5332]

Fran, keep up with the awesome work bro. Chevy power all the way!!!!!💪🏻💪🏻🤘

[@shaneman20]

Not gonna lie. I'd be first in line for one of those LS crank rotation tools. That's sick.

[@MikeMinervini]

whoa good save on that guys "rod knock"...

[@jaredthisdelle5617]

Oh god the v .998hp I'm in love😍

[@nataliedeyton6829]

You know it a wander anyone gets any work done with Steve aggravating the shit out of the guys that are ACTUALLY working 😂 👍

[@Mechanic618]

14:40 is that blower slightly over-revving itself at the peak on that pull? Never heard that kind of metallic bearing noise before on a pull, so just curious what that is. Maybe just a harmonic?

[@buda18]

@10:22 you people dont realize how genius this is. steve well done sir. you planned to do that smooth transition into the hood to close the day and then roll out of the hood for the start of the new day. what i bet most people didn't realize was that it really was a new day!!!!! haha, i feel like so many people missed that. and then to make it even better, matt made fun of you for coming in from the front he's like "why dont you come from the rear", not knowing that you actually just completed an artistic entrance and then eric in the back calls him a hater. hahahahahahaha omg the beauty of this is amazing. i'll only bring my car to you guys if you let me come hang out with my car while you guys work on it. :) yall are fucking hilarious

[@adrianespinoza5531]

Matt has been on a roll..🤣🤣 more like angry funny Matt..🤜🤛

[@jeffclayton9968]

Once again excellent job.

[@georgem.6136]

Matt needs to weld a 3/8 or 1/2 “ drive tab on the oil pump gear so you can use a regular snap on ratchet of your choice

[@richardpenner4686]

Bleeding a clutch...why did you cut it out of the video...would of liked to see how its done...ya I know its boring but it is kind of interesting if you have never seen how its done...I watch this channel cause I want to learn something about corvettes..You guys do a good job...keep up the good work...

[@thekingscene]

Ahhh those cam bearings... Lol gotta love the internet 😂

[@aknownpatriot5746]

"This is my LS7 crank rotation tool." -I spit beer everywhere

[@aumetalmental8403]

I actually saw that Rolex Oyster watch clip too. He deserved it.🤗

[@lowrider5502]

22:00 Matt: we're gonna do meth? I know he means methanol not crystal meth But his face fits choice number 2

[@iibadsportii690]

No classes today so morning is starting out well

[@sureshotchevy]

Matt, “the songbird of his generation.” “Like a mixture of Fergie and Jesus!” 🤣🤣

[@johnirion3023]

Old video but curious if anyone knows what tires are running on the black base C6 with the A&A supercharger? 305's out back?

[@fh5tuningredlinemotorsport766]

What size pulley is on the A&A kit? Thank you for your time in answering its greatly appreciated

[@tuneportblazer]

Just weld that pump drive to the end of a deep socket,problem solved.

[@buda18]

nope, you weld a bunch of of the gears on top of eachother, weld a flat steel to the bottom, and then weld a half inch socket onto that plate. boom.

[@Alex-pl1ye]

Weld the crank thing to a big socket then you can use a ratchet

[@Joe_likesthepump]

Damn that white #V3 sounds amazing!! Good laughs too!! Monster triple!!! 🇺🇸💪🇺🇸

[@LineMUp321]

23:13 ... I'd buy one especially when it gets the ratcheting action.

[@themchangesband]

What's with the "Multiple Meeks" hand gestures?

[@billbob9570]

turning motor backwards?

[@blackbearddave]

What is the difference in size/and power output between an A&A kit vs procharge f1a94

[@mikael4126]

The A&A is better at making power. Depends largely on your tune, but I'm guessing 35+ RWHP with the A&A over the procharger running on a good tune.

[@jaredthisdelle5617]

The slow motion of dyi freaking great this vid was great just LMAO 🤣😂😁🤣😂🤗🤗

[@pnwc6980]

What pulley and rib?

[@charliegugino8047]

Making Corvettes Great Again

[@polloflores6186]

What size injectors?

[@rafatrill]

Dude weld a socket to it and u can use a ratchet

[@TT300zdriver]

I was about to suggest the same thing

[@ghc_gto_6.0]

DYI = do your install DIY= do it yourself

[@JC-hh7dk]

are those stock rims on the ZR1?? if not who makes them??

[@themchangesband]

Weld it to one end of a nice looking wrench

[@booplesschpooples6027]

Gotta ask!!! What do you do with all the cams and blowers that are own and replaced with aftermarket? Do you give them back? Keep them and sell them?

[@RaceProvenMotorsports]

Give them back

[@booplesschpooples6027]

RaceProvenMotorsports I was just thinking what a money maker rebuilding/porting heads and Lsa blowers would be! If you guys offered a small discount and scooped up ls3/ls7 heads and manifolds you could sell them factory cast. Most people might not even know what to do with any of the used parts

[@billbob9570]

my c6 sounds like that "fake cam" sounding zr1

[@justintimberlake9347]

Two videos in season 8 show private not sure if their new or not

[@RaceProvenMotorsports]

They are next weeks episodes they will go live on Wednesday & Friday

[@Lilmattw_freshoutdabox23]

Only 3 haters Not bad for the day...

[@kylemcbeth1729]

I have an Ls7 i have had the valves inspected and fixed on the stock heads. Do i need to continue to worry about valve drop? If i go with you heads cam package do i still have to worry 50,000 miles from now about this issue?

[@RaceProvenMotorsports]

We have never had a single issue on any car we have fixed. We have been fixing them since 2009

[@ryz3367]

Got the E1-E9 ranks wrong , corporal and specialist are both E4 then E5 is sergeant and then SSG but it’s okay I love these guys and they are a performance shop not military 😂😂👍🏽

[@RaceProvenMotorsports]

Just googled copied and pasted

[@digitald5851]

Informant for the CIA. Cam Install Association

[@dannysampson3687]

I have a question off topic if you don't mind, I have heads, cam, E85, I get quite a bit of fuel smell, is this normal are can this be fixed with proper tune ?

[@dannysampson3687]

Any advise would be appreciated !!!

[@zahiremanuel9954]

Sbe for 5 years?

[@t6378tp]

What do you think that base c6 with the a&a kit would need to hit 700rwhp

[@streetoctane1878]

It was only on 10.7lbs of boost. So at 12lbs easy 700.

[@mauricedavis2905]

Boy i am old i remember when my E3 pay was 618 a month 🤣🤣🤣

[@blackwaterdogs4256]

Sheeeitt, son....IIRC, back in `68, PFC pay was $214, plus $55 a month combat pay. The upside: smokes were $1.90 a carton (!) at the PX....

[@ScottStang5.0]

Seeing eric laugh like that had me dying. #notsoangryeric

[@SLAYKINGPEDRO]

Do you guys work on ls1 *2000 Z28 Camaro *

[@RaceProvenMotorsports]

No

[@SLAYKINGPEDRO]

RaceProvenMotorsports damn thanks 🙏

[@bikotheanimator6169]

Previously, on Avatar

[@RobertKohut]

Nice!!

[@tatewhite7876]

A CUP!!! 😂😂😂

[@CompBuilt]

Whats the blue film called

[@RaceProvenMotorsports]

raceprovenmotorsports.net/products/blue-fender-wrap-24-x-200?_pos=1&_sid=4180efdd0&_ss=r

[@kolbyhumbert2545]

I dont understand how that zr1 with the stock cam sounded so choppy?! Someone explain?

[@YELLOW08Z06]

Kolby Humbert if it’s tuned you can make a stock cam choppy

[@cornfed_zed7327]

Ethanol runs cooler than pump gas and it won't burn as efficiently when cold. The chop goes away once it's warmed up

[@ToG_7]

rip to these kinds of vids

[@SubiSkank]

Everyone knows it’s, Do Yourself It...... DYI 😂

[@albertosalinas330]

Dyno 997, insert Nancy Pelosi tearing dyno sheet

[@jonjon-vx7rh]

Enlisted ranks are incorrect😬

[@orionfixr7713]

Steve; " I'm not a stock C6 guy ." So what kind of Corvette do you have , Steve ?

[@Bsaint]

Orion Fixr I’m poor I can’t afford a car

[@orionfixr7713]

@@Bsaint ; I walk a lot too . ( ssssss ! )

[@notbuyingit8047]

It makes me laugh when I see a civilian totally fuck up the the rank structure. 06:36

[@jennyloughry896]

Can y’all get my stock 2018 Escalade to make 1000 whp?

[@RaceProvenMotorsports]

Of course, anything is possible with enough money.

[@jennyloughry896]

RaceProvenMotorsports roughly how much we looking at? You guys source everything. I will take care of shipping.

[@RaceProvenMotorsports]

40k or so

[@jennyloughry896]

RaceProvenMotorsports that’s a damn good price!!

[@davidconley3610]

Paint it black!

[@dominickirkwood]

I love it my guys rpm keep up the work and love video and I love CTS V beautiful 💯💯💯💯

[@Joeshomegarage]

Morning!

[@michigansoundwizard]

Cornfed, I hope it's all up hill from here. I'm still awaiting Fletcher's V to be completed as well. Ucountry has good numbers.

[@1216jimmyz]

That plate said u can try ...I thought the same as you at first

[@Joe_likesthepump]

D.I.Y Mathew!!!!!!

[@LineMUp321]

Imagine... spending 12k on a Motor only to find out it was a cat... ... ...

[@billbob9570]

WAIT WAIT WAIT informant for the????fbi mossad?

[@emmanueltembo9406]

I thought boosted ls3s make more power than boosted ls7s

[@RaceProvenMotorsports]

Emmanuel Tembo LS3s can handle more boost than an LS7. Also Ls3s aren’t 12:1 compression. No one ever said a boosted Ls3 make more than a boosted ls7.

[@kolbyhumbert2545]

RaceProvenMotorsports how much boost do u run on a 12:1 motor with meth?

[@Mattlt1]

Oh to be a fly on the wall at this shop! Lol I would probably pee myself on the daily

[@rogerrolex6981]

That’s crazy you definitely don’t want some moron even detailing your car that believes the motor is bad due to a rattling catalyst.🤯🤯🤣🤣

[@waltmann66]

Nice little editing trick Steve, And KP is still funnier than you.

[@baddbradd89]

The 'previously' opening has played itself out....100 episodes ago

[@waltmann66]

And my car is faster than yours to Steve.

[@Bsaint]

waltmann66 congrats 😂😂😂 not hard to do

[@jeff4air985]

Do you send C6 out for alignment after clutch replacement?