A BIGGER carb always better?!

Рет қаралды 35,019

Күн бұрын

How to know what size of a carburetor you should use? How to size a carburetor and how to measure it? How big is too big? If you have confused with these questions, this video will get you covered!
Please comment down what you have learned if any, so we can have some feedback on what the next KZbin video can be about.
Nibbi PE24FL & PE30 Carburetors: bit.ly/3okcQP1
#carburetor #jetting #nibbiracing

Пікірлер: 42

@shushunliu6572 9 күн бұрын

Would this carburetor be able to work on a predator 212cc as replacement besides mikuni carburetor?

@JCSDieselPerformance 2 ай бұрын

My honda cr80 has a factory 28mm carburetor. So idk where this this recommendations are coming from

@Deucealive75 Ай бұрын

2 stroke engines need a bigger carb than 4 stroke engines. His recommendations are for 4 stroke engines.

@JCSDieselPerformance Ай бұрын

@@Deucealive75 then he should clarify that.

@uper9648 10 күн бұрын

for my aerox 70 cc its ok delorto 21?

@JenkinsJudy-i9d 7 күн бұрын

062 Farrell Greens

@AJ17119 11 күн бұрын

Can any nibbi carb fit a drz400sm?

@claudiohernadez1928 2 ай бұрын

Witch one would b the one for my lil 2 stroke 49cc engine

@mskrk 6 ай бұрын

is a 30mm carb for a 110cc overkill ?

@ziutekpoliski7886 6 ай бұрын

yes , i recomend using 19-21 mm

@culycule 6 ай бұрын

@@ziutekpoliski7886what about 125cc?

@ziutekpoliski7886 6 ай бұрын

@@culycule 24 mm is max. i woudl go for 21mm carb

@yahyarizvi6126 3 ай бұрын

For 150cc possible?

@georgelaw92 2 ай бұрын

@@yahyarizvi6126 no go 26

@Loli4lyf 5 ай бұрын

what's the best carburetor size for my 125cc moped? i want more power while keeping fuel consumption low

@OneBiker98 2 ай бұрын

Most 125cc mopeds usually come with 18mm from the factory. Try a 22mm. I have a PE22 on my Suzuki FL125 and it has good performance and doesn't consume much if I ride it at normal paces.

@hsojrasaec7046 2 ай бұрын

Can you put a nibbi racing carb fcr 39mm on Honda Trx400ex?

@user-ht1dh7uu7f 3 ай бұрын

Might get one for my 2005 CRF100F

@demarrobinson1517 4 ай бұрын

Is a 32mm carb too big for 200cc?

@dkhallal 4 ай бұрын

I am trying to find a way to adapt the 19mm carburetor with the flange to my GY6 scooter and cannot find the right size to put on the carburetor so it will fit the intake manifold on the BBK (went form 50cc to 80cc) head I put on it. The studs on the head are spaced at 46.66mm. I was wanting to use the existing factory manifold but I think it will be too small. Is there any other way to do this?

@user-xm3lm8ed1h 4 ай бұрын

I want a carburetor suitable for a Suzuki AX100 motorcycle. Please, model number if available

@younessbenbraitit7735 6 ай бұрын

I have a 4 gears semiautomatic engine 150cc am using 29mm Wich one is better

@georgelaw92 2 ай бұрын

26mm

@AbduTaleb 9 ай бұрын

whats best for racing on aprilia sr150cc? if you know!

@anthonycortez740 7 ай бұрын

26 or 28

@marshallkaufman3123 6 ай бұрын

hello i have 90cc pit bike and tried putting on pe19mm no matter what jets i use its boggy and super hard to start. is the carb just not designed for motors this small? im gonna try your pz18mm instead hopefully it works

@tiaguinho6756 2 ай бұрын

Try a 21mm... Is it 4 stroke? If it is then i don't know... But if it's a 90cc 2stroke, at least a 21mm is advised... In my country 21/24 are used for 70/80cc racing scooters

@marshallkaufman3123 2 ай бұрын

@@tiaguinho6756 the pit bike was low on compression and needed a head gasket. from Canada, i have a 1990 dt50lc it was pretty much one of the last 2 stroke models they sold before they banned them here. with stock bore it goes 105kmph with aftermarket carb and firebox exhaust

@tiaguinho6756 2 ай бұрын

@@marshallkaufman3123 DT50 here in Portugal there's barely anything stock... It's the N°1 50cc for tuning we have some 100cc and there are some two cylinder fusion etc... Dtlc50 is the n°1. Stock with a good carb, better gearing and stuff you can push it to 120km/h... If you want you can see some projects here