A Deep Dive to HG-2 & HG-2MS by Plugin Alliance - Guide tutorial

[@striverfor7628]

Notes for myself Pentode and Triode. 0:40 The fundamentals. It's a saturation plugin. Saturation and Air Amount. Options along the top. Has immediate effect upon adding it on the track. Harmonic distortion. Mix control. 1:31 Pentode deals more with even order harmonics, Triode is on the third order harmonics. Both have even and third order. Pentode is first saturation part in the chain. Nothing on Pentode means nothing on Triode - need to use both of them - demo. Control the Output. Plugin off then on demo. 3:20 Sum-up. Density and Calibration 3:32 Pentode turned up. Triode adjust. Saturated type of sound. 4:09 Top controls. Mix - the saturated and non-saturated sound 4:38 Input, Density and Cal. They're important. Turn Input down, it affects harmonic distortion - you're driving less into the plugin, can drive more if you want. 5:11 Density - drives the plugin input gain harder or softer, but it affects how the sound goes out. It compensates the Gain on the Output, demo, changing Density, Output stays the same, Density control is aware of the Output setting. 6:29 Cal. Dark, Norm and Bright, they change the shape, the bump. 7:20 Affects how the sound comes out, sound demo changing the Cal settings. Saturation 7:57 Low Flat High section is off by default 8:46 Pentode and Triode are an emulation of real tubes. Pentode and Triode use 6U8A vacuum tubes, Saturation is an emulation of a 12AX7. Turn on Saturation, demo, it's really saturated. 9:57 Can turn Saturation dial to 0. It's a parallel saturation on the plugin. Can check how it sounds without saturation. 10:32 Alt Tube, a different modelling of the 12AX7, it's cranky. 11:04 Low Flat High - works when Saturation is enabled. Changing the settings, demo. 11:34 Low setting, listens to the lows - saturation will be applied on the low freqs, demo. Flat does it to the whole spectrum - saturates everything, starts to sound bright - why Cal options are important, demo. 12:17 High setting, sounds very different, more saturated on the high end. Can just use a little saturation. 12:45 Recap. Air Amount, turn it on and turn up Amount, boosts the highs. Demo with Saturation settings. Doesn't help the Air if you saturate the highs. Changing dials. A tiny boost. Vs HG-2MS 13:51 It's a 2-channel plugin. Bottom right controls. Bottom left controls. Can also do Mid or Side. Can unlink parameters, and offset them the way you want. 15:18 TMT, analogue mode. They modelled different versions of the plugin. Because it's an analogue kind of plugin the left an right are a little different. 16:18 Changing controls and seeing differences. Select different channels.

[@RealHomeRecording]

THIS video deserves 123,000 views, not that White Sea Studio guy's video who has no clue what he's doing. Thanks for this in-depth tutorial. Even though I've been using the HG-2 plugin and hardware for awhile, I learned some new things. SUBBED!

[@joseluisrevelo]

Don’t know why but I dislike that guy too. Maybe too clickbaity?

[@Arcessitor]

@@joseluisrevelo He does low-effort first impression video masquerading as reviews.

[@REMRODFILMS]

no one has done a review this detailed! great job!

[@imaginarytube]

I agree!

[@DjeanU2b]

Maybe this is the best review I`ve seen in my life.

[@mbot48]

Best explanation on plugins. Thank you sir!

[@renebrossard]

Well structured comparison of each units. This is very useful. Two thumbs up. Thanks!!!

[@XNBeatsMusic]

Glad it was helpful! Thanks for the comment.

[@philmassey931]

Watch all your guides. Great job keep it up. Thanks

[@burongaroso2538]

This is the best Channel on YT explaining how Things really work. Thank you my Friend ❤️

[@SamitoBeatz]

This was very helpful to me, thanks a lot and keep going!

[@kmalectro]

Well done ! THX

[@joramletlora8079]

Awesome! What tool do you use to see the freq curves?

[@NoSurrenderMuzik]

Its called dr.plugin

[@NoSurrenderMuzik]

Plugin doctor

[@toolondaboards]

Looks like Plugin Doctor

[@ronduremusic5972]

just got this so helpful thank you !

[@Ainsley.Silver]

Masterclass!

[@martinmessineo]

Exelent !!

[@dadoux11]

Very nice explanation of this plugin... Thx ;)

[@mfoster404]

Best review ever !

[@JLedet]

what is the plugin that you are using to analyze what happens when you turn each knob?

[@XNBeatsMusic]

Plugin doctor.

[@leo_jones]

Good guide!

[@striverfor7628]

Nice, of interest to me, I have this because of a PA bundle I got a while ago. Will get stuck into it soon

[@bsmpro6118]

perfect tutorial

[@Prod_Xarin]

How are you so accurately displaying the changes inside vumeter?

[@LightersInc]

best channel ever

[@tendingtropic7778]

thanks for this! with these new options, the m/s version of this is quite similar to the vsm-3 plugin from PA? true?

[@SouthPhilly28th]

Thank you!!!!!!

[@StereotacticMusic]

Perfect

[@Bville-E]

You rock......Subbed !!!!!

[@tyalexandercheng]

How do you check the EQ curves of plugins?

[@NoSurrenderMuzik]

Plugin doctor

[@tyalexandercheng]

Can you use the HG-2MS in the same way you use the HG-2? If you get the HG-2MS, does that nullify the HG-2?

[@CrisPearson]

Also curious to know this

[@CrisPearson]

FYI: I just bought HG-2MS and it comes with a license for HG-2 anyway.

[@Arcessitor]

@15:35, no, I get T(eenage) M(utant Ninja) T(urtles)

[@SheharyarMusic-u1w]

Please do a deep dive of "The Oven"

[@GoutamSingh]

osm😮❤❤❤❤❤

[@fabriceoze]