A DISASTER, A TEST DRIVE AND A BREAKDOWN - THE VAUXHALL VIVA RUSTY RESTORATION CONTINUES

[@Norfolkonsea]

Take your little lad out every ride! "Why have you parked in the middle of the road dad?" 😂

[@RetroRebuild]

After seeing himself on the TV he wants to come on more test drives 😄 no filters in kids minds brilliant some of the stuff they say 😄

[@flatcapjohn]

Great content, mirrors look grand. Kids made me laugh with commentary 😂😂

[@RetroRebuild]

Thank you mate, kids be crazy 😆👍

[@buickmclean8163]

Well , what a modern Dad . My Dad would tell me to get out of the car and push . I remember trying to push a 1967 Humber Sceptre up hill during a snow storm. It does n 't take a lot to upset a rear wheel drive vehicle in bad weather. Pushing cars , shovelling coal , the smell of paraffin , and standing on the passenger seat with your head out of the sun roof . What sort of childhood do they have now ?

[@RetroRebuild]

😆 sounds like great memories mate 👍

[@robleary3353]

Bril!, always a laugh, always an education!. Love that you use words like 'thingy mebob! and the like, reminds me of my dearly departed Dad!. Nice one!. Nuff said!. 🙂

[@RetroRebuild]

Thingy mebob and thingy mejig the universal language 😆 thank you mate 👍

[@terrortorn]

"Are we gonna crash" ........ classic banter!

[@RetroRebuild]

😆

[@michaelwaite6725]

Love your lad's comment at 13.02 "watch that old lady" 😂

[@RetroRebuild]

😆 👍

[@chloedevereaux1801]

ahhh bless him, it was clunky from new !!! 😃😃😃

[@RetroRebuild]

😆

[@richardhunter7363]

You need a Colortune set - glass cored sparkplug that allows you to see the flame colour in the cylinder. Loved the new tool for the weather strips - made me laugh out loud.

[@Taz6688]

Was just about to add the same, the Colourtune was handy back then for getting the mixture closer to optimum.

[@DarksideoftheSteve]

Blimey I remember those! I remember my Dad tuning his MK1 Cavalier with one of those when I was a lad. Great bits of kit.

[@RetroRebuild]

Thank you mate, 😄 I'll keep a look out at some auto jumbles for one 👍

[@troygoodacre2718]

I had a 1971 viva. I bought for my first car from my grandmother. It had only done 25,000 miles. But as soon as you drove off it took me back to 1984 you never forget the sound of a viva. Mine sounded just the same

[@RetroRebuild]

Ah brilliant mate, what a first car ! sounds like great memories 👍

[@troygoodacre2718]

@@RetroRebuild yes. She got a mk1 fiesta and found she couldn’t reach the clutch very well so she had the viva back and I had the fiesta. She had lost her confidence a bit and the first time she went back out in the viva. The gear stick came out in her hand she never drove i again after. That and the viva was kept as a spare car for all the family

[@RetroRebuild]

@Troy Goodacre I've heard of that being a common thing on the vivas the gearstick popping out !

[@Ken_Dodds_Tickling_Stick]

Another top video Steve. I look forward to a Sunday to view your exploits. And yer young 'uns commentary is priceless.....youve created a new star there.....expecially when he looks into the camera when the car stopped and says "sorry guys" 😂😂😂😂😂😂😂😂😂

[@RetroRebuild]

Thank you mate, appreciate it, 😆 yeah they have us in stitches most days, kids unfiltered minds 😆 I was howling when I looked through footage and realised he said that!👍

[@OldspeedJDM]

Steve 😂 the butter knife was an excellent choice 👌🛞💨💨🏁

[@RetroRebuild]

😆 thank you mate, adapt and overcome 😄 👍

[@OldspeedJDM]

@@RetroRebuild the truth ❤️‍🩹😆

[@keithburnett-i7f]

There should be a guide in the Haynes manual re the mixture Steve. From memory, if the spark plugs are sooty & black the mixture is too rich. If the plugs have a white, powdery deposit, the mixture is too lean. All the best mate 👍

[@RetroRebuild]

Thanks mate, yeah there is I'm working on mixture and carb tuning at the minute 👍

[@paultierney8867]

Great vid, made my Sunday morning, Looks like great family fun. Professional use of correct tool had me in stitches, amazing they can still be found. LOL !

[@RetroRebuild]

Thank you mate, 👍 😆 adapt and overcome, if I haven't got the right tool I'll make something work 😄

[@johnmorrow7080]

I served my time as a panel beater at Adams &Gibbon Dunn st Newcastle worked on hundreds of Viva's HA, HB and HC's , my Fave is the Droop snoots only ever seen one a Magnum Sportshatch as well as HS Chevette's , I came across some lads Vauxhall mad down the Felling , one had a Cavalier Calibre I had never heard of them , a mate has a Chevette with a red top in it , any case looks a half decent little car normally the inner wings are rotted out good luck .

[@RetroRebuild]

Thank you mate, ah that sounds great, what a time to be working there, I love all the viva's and the chevettes, pretty much all the classic and retro vauxhalls 👍

[@dreammaker730]

Ha ha when your son said sorry guys, just the sort of thing my son would have done . See you on the next one .

[@RetroRebuild]

😆 crazy kids, unfiltered brilliance 👍

[@ronyardley3833]

Hi Steve you can make adjustments to carb with engine running with that tool on path, if it overheats it's to weak. Drive in forwards though, you can make fine adjustments. Once a command sight cars breaking down and being pushed. People today would have a hissing fit and could not handle pressure.

[@RetroRebuild]

Hi mate, thanks I'm messing about with the carb at the minute so hopefully get something sorted, 😄 I've pushed plenty of cars in my time, I used to have to bump start one myself every morning to get to work😆👍

[@ronyardley3833]

Hi Steve, me too push starts in morning and after work lol, try doing a vacume test on carb and try to add red ex or fuel additive, I think modern fuel starts to go off after about 3 months.

[@DJ-Daz]

What a gorgeous colour. All cars just look the same as all the other cars. You can't say that about the 60's 70's and 80's cars. I learned to drive (thank you dad) in a Cortina MKIV 1.6 and what a drive that old tank was.

[@RetroRebuild]

Thank you mate, too right you can't beat the old styling, I love the cortina,s too 👍

[@garyoneill3052]

I'm now famous 😎thanks for the mention Steve I wasn't expecting it 😃it was funny seeing your son with he just reminded me of mine when he was that age twenty questions 😆my son is nineteen now so he just asks me when I'm getting the beers in! Keep making the videos mate 👍

[@RetroRebuild]

No probs mate, thanks again, yeah they crazy kids, they've got no filter funny the things they come out with,😄👍

[@andiparker3733]

The shot of your Viva in the sun at the beginning of the video was gorgeous 😍

[@RetroRebuild]

Thank you !👍

[@edwardmahony8160]

She's lookin great Your kids are a pair of cool dudes too!!!

[@RetroRebuild]

Thank you mate 👍

[@oldjaaag9804]

Nice to see the bright yellow Viva out amongst all the dull moderns!

[@RetroRebuild]

👍It was a nice day for a cruise round the doors mate

[@Mitch-Hendren]

Yer lads were the stars of this episode .. eldest do you like it ? "Erm .....yeah.. " His wee face saying the complete opposite 😏 And a male future version of hyacinth bucket in the making ..." Watch out for that owl lady " Give us a big belly laugh that did .. Shame about your mirror. Hope you can get glass cut to size for it. Try a glazier. Them engines were always fussy . Mix and timing have to be spot on that much i remember from mine. Great vid as always. You're winning !!

[@terryatkinson899]

Couldn't agree more with your comments 👍

[@RetroRebuild]

Thank you mate, yeah they've got no filter they brilliant! You can still pick up glass replacement for the mirrors pretty cheap 👍

[@Ridley2907]

Its always great when you realise you have the right tool for the job in the kitchen drawer. 😂😂.

[@RetroRebuild]

😆 adapt and overcome 👍

[@DarksideoftheSteve]

Another great video, Steve. I simply cannot get over how smooth and sweet that almost-fifty-year-old engine sounds!! The only complaint I have about this video is that there simply was not enough tea and biscuits consumed...this is unacceptable and I would like you to remedy this in the next one... everyone knows that tea helps you think better when doing these jobs 😂 Coming along nicely mate...keep chipping away at the little jobs and you'll get there...I for one am enjoying the proverbial ride! - Steve

[@RetroRebuild]

Thank you mate, she's not sounding too bad is she! 😆 I did eat quite a few cookies and drink a lot of tea making this vid but forgot to put it in as it was a rush to edit, I'll make up for it next time 😆👍

[@stevenjones19-m8i]

Hello Steve, another top video,the door mirrors look to fit the car alright spec wise til you find another one.

[@RetroRebuild]

Hi mate, thank you, yeah they'll do for now 👍

[@G7IQJUK]

VIVA HA, HB, HC , VAUXHALL CHEVTTE Worked on many 80s 90s owned vivaHC 1995- 2000 . ALLWAYS carry basic spanners / socket set , screw drivers, pliers . spare fuel pump , points condenser , points to coil wire water pump , hoses core plugs , fan belt diaphram for carb . DONE many repair on side off road always got home happy days .

[@RetroRebuild]

👍😄 oh ill be carrying a stocked tool box with me mate 👍

[@G7IQJUK]

@@RetroRebuild YEP always get home old school 30+ yrs old . . Not like modern after 1997, under 25 yr old stuff ECU COMPUTER controlled need osd reader if sensor fails u stuck .

[@kevinnye5132]

First child I haven’t heard say “ are we there yet “ 😉, seeing you drive on road takes me back to 70s when you saw Viva’s everywhere 😁 such a nice memory from childhood and saw many being pushed to 😂, have to ask Steve ? Is it not allowed up north to take 2 kids in a car at the same time 😂😂, car sounds great and runs ok 👍🏻.

[@RetroRebuild]

😆 thank you mate, there's no seat belts in the back seats so that's why I took them out separately 👍

[@kevinnye5132]

@@RetroRebuild Oh of course , yeah 70s cars rarely had seat belts in back , safety first good thinking Steve 👍🏻.

[@RetroRebuild]

@Kevin Nye thank you mate, I do want to fit some in the back eventually 👍

[@chloedevereaux1801]

puts new mirrors on, rips them off reversing out the drive 😍...

[@RetroRebuild]

I ripped it off from inside the car trying to adjust it passenger one is too low to see well 😄

[@hoggmotorsport]

Alright mate 👍 "watch out for that owld lady" class 🤣🤣🤣 glad to see you had the correct tool for those clips 😉🤣 ya really need it on a exhaust gas analyser to set the mixture. The's a auto jumble on at the North East Restoration Club, Washington on the 28th, think its on every few weeks, they might have an analyser too 👍

[@RetroRebuild]

Alright mate, 😆 yeah they both unfiltered and funny I was howling looking back at footage, thanks for that mate I didn't know about that jumble, I probably won't make it to the one this month but I'll definitely being checking them out regularly from now on 👍

[@RetroJay1974]

Should have been at night with a full moon WOOOOOOOOOOOOOOOOH lol! more brilliant content :)

[@RetroRebuild]

😆 thank you mate 👍

[@terryatkinson899]

Weatherstrips... frustrating when they don't come with instructions or the extra bits you might need and they're not bloody cheap either.

[@RetroRebuild]

I know mate 👍

[@geordiemagpie8785]

What are you like, waited all that time for a pear of mirrors then you go and break one you numpty. Great video and love your home made tools.

[@RetroRebuild]

Thank you mate, a na nevermind tho,😆 the butter knife a versatile tool 👍

[@malcolmbutler8451]

From memory (1990) i took the glass out, the weather strip is secured to the (rotted out) strip then pushed inside the apperture pulled up and clips to the chrome strip on the inside then put the glass back in. you will probably need plasters, coffee and hobnobs. try not to bend the missing bits as the weather strip wont lie flat to the glass, great entertaining content look forward to your next instalment

[@RetroRebuild]

😆 thanks mate, coffee and hob nobs are an essential in garage tinkering 😄 👍

[@tyroneharris2790]

Hey what did I say about the breather hose ? the hose was disconnected from the top cover of the air filter housing ! also DO NOT disconnect ANYTHING AT ALL and put the air filter cover back on and make sure all hoses are connected. Also check there is no leaking vacuum hose to the vacuum advance unit, you can check the vacuum advance diaphram by pulling the thin pipe off the inlet manifold !! and then suck through it, to see if it pulls the diaphram on the dizzy, if it does not !! it then means you have a perished vacuum advance unit, BUT it can still work when the pipe is connected back on the inlet manifold, as this only happens if the diaphram is very slightly perished because of the engines strong suction. And finally... you should ONLY adjust the mixture when the engine is running at idle WITH THE CHOKE FULLY OFF after the engine is FULLY warmed up. It looks like you have a Zenith or Stromberg CD3 carb by adjusting the mixture from the dashpot damper, also Stromberg have it at the bottom on the float chamber bowl, that's the CD, CDS and CD2S but Stromberg CD3 is on top, I was not sure which one you had. But there is a special tool to keep the needle valve central as it screws in the damper thread and you put the Allen key in the centre of it, I use to have one but lost it a few years back otherwise I would of sent it to you. REMEMBER you cannot disconnect anything !! because when you reconnect it will throw the mixture right off !! On a positive note...there is nothing wrong with that engine !! it is good !!! I know for a fact it should run sweet at 850rpm, and yes the gearbox does let it down. The Magnum slant fours also had terrible gearbox's but Vauxhall are well known for bad gearbox's. Anyway all the best and keep on rocking !! 👍😀

[@RetroRebuild]

Thanks mate, I had the breather disconnected because I had the airbox open while I was lifting piston to listen for engine revs anyway so it didn't matter about breather I've got the special tool for adjusting needle that's what I was using mate, I'm going to remove carb to set butterfly valve clearance 👍

[@Boppa1260]

Sorry guys 🤣👌Brilliant.

[@RetroRebuild]

😆 thanks mate 👍

[@TheJackSampson]

Amazing what you can use a butter knife for,,,,,

[@RetroRebuild]

A versatile tool 😆👍

[@bobgorman9481]

I must say , your headlining seems to be very good condition, most Astras made 20 years after your Viva used to drop theirs after a few years!

[@RetroRebuild]

I was just saying that mate, yeah it does look in great nick for the age 👍

[@Ken_Dodds_Tickling_Stick]

The headlining on vauxhalls from this era had metal rods, which were fed through the lining and located into holes above the doors. Headlining in the astras, cavaliers, calibras etc were glued onto a fibre backing plate......through time the glue disintegrated and the top layer drops off the backing. Why vx changed this design I'll never know.

[@kins749]

Your youngest lad made me laugh "Dad, why are you parking in the road?"

[@RetroRebuild]

😆 they're both crackers, the footage had me laughing too editing it 👍

[@mickspencer4171]

Mirrors look a treat, bast about cracking one, bloody typical as you just fitted then, your little un made me laugh. great vid, keep 'em coming Steve.

[@RetroRebuild]

Thank you mate,will do, yeah he's a cracker 😆👍

[@brianrobinson7984]

"and for my next trick, I'm now going to change my tyres with this dessert spoon I got out of the kitchen drawer, worked for my bmx back in the day and I reckon it'll work for this" 🤣

[@RetroRebuild]

😆 I wish mate, I did a video where I changed my tyres myself with a manual changer,they were tough old bloody tyres to get off, it was kind of like a big spoon i used 😆

[@aaronbensi9723]

Good video. Keep them coming.

[@RetroRebuild]

Thank you mate, will do 👍

[@Saaketti]

My HB viva owner ear says that the whining noise from the gearbox especially in 2.gear is completely normal. If it faides away in 3rd and 4th gear. The gearbox is fine then.

[@RetroRebuild]

Thanks mate 👍

[@vandervecken2577]

My kids are grown up now, I kind of miss comments like ‘Dad, Why have you parked in the middle of the road’ … classic, bless ‘em. Seeing the Viva driving is epic, it was actually quite a nice looking car for it’s day👍🏻. Just a quick info bit , you can tell if your mixture is too rich by black coloured exhaust👍🏻

[@RetroRebuild]

Thank you! Yeah kids be crazy mate, 😆 it's brilliant how they just say what they're thinking, yeah you can't beat the 70s styling On cars, thanks for the info I'll check it out 👍

[@DanDoge-wp7uj]

I learned how to do bodywork on my mother's Battleship grey HA. It had ten tubs in it. I was 14 years old. LoL. Got to get you some rostyle wheels. Some big spot lights. A stereo to drowned out the strait cut gears..lol. sawdust in to he axle and box. LoL. Good luck.

[@RetroRebuild]

Ah class mate, what a learner car! 😆 I've got some spot lamps and I do have some rostyles that need a refurb👍

[@DanDoge-wp7uj]

@@RetroRebuild Great job. Get um on. Summers here. LoL. Need some chrome rings. Good luck.

[@DanDoge-wp7uj]

Fixing mom's HA was 1978. LoL.

[@BigDave1965]

That gearbox whine is normal, my Dad had a new Viva estate every year as a company car, so grew up hearing that whine 😅

[@BigDave1965]

Forgot to add I work at the plant were the gearbox was made, knew some of the guys who were on the gearbox line most of them whined a lot 😁

[@RetroRebuild]

Good to know mate, it certainly is whiny like 😆

[@RetroRebuild]

🤣

[@nadimatteeque4028]

I'm sorry my friend but it never occurred to me, I was at the Beulieu Auto Jumble and I could have found you the other door mirror. If you haven't found one by the end of August, let me know as there is usually one in September.

[@nadimatteeque4028]

That is supposed to be Beaulieu Auto Jumble. Didn't check my spelling.

[@RetroRebuild]

Thank you mate, appreciate it 👍I'm going to be searching a few auto jumbles in the next coupe of months just found out about a one near me that's held every month too.

[@FordTransitvan]

Good to see your lad wanting to get out in the car ❤

[@TheGramophoneGirl]

With added Breakdown Peril included for free. Excellent.

[@RetroRebuild]

Thank you😃

[@TheHorsebox2]

If anyone asks, tell them it's got a gearbox from a '56 Cresta. They all whined! Love the gag with the knife, laughed hard at that. 😂. As for pushing a 70s car, that's authentic. Our Dads did it, and it's good enough for us.

[@RetroRebuild]

😆 thank you mate 👍, yeah youngens don't they're born these days if they've never had to push a car, I remember bump starting a one on my own every morning to get to work 😆

[@terryatkinson899]

Last time i bought mirrors glass it had a plastic clip so you push it onto the motor... easy right 🙂 not for me, pushed too hard and glass through the thumb 😭

[@RetroRebuild]

Ouch! Nightmare mate!

[@chloedevereaux1801]

clean the clips, put them on the strip the insert the whole thing into the door..... and don't try to wind the window up without them..... bye bye strip lol...

[@RetroRebuild]

Don't think theyl work the bottom of strip hasn't got the same depth as old one, clips won't reach, it hasn't moved yet its holding in there 😃

[@micktuck5377]

Love a ‘’over reaction’’ Steve great video. Could you get a new glass for the mirror, it’s a shame mate

[@RetroRebuild]

Thank you mate, yeah there's a website that does replacement glass for them for about a fiver 👍

[@richardhaywood4123]

I think if you look at the workshop manual or the factory shop manual there is a rough guide to getting the mixture ok by warming up to temp then take the airbox off and with a small screwdriver and lift the piston a little,can't remember which way it goes but if it dies then picks up it needs to be richenned up or weakened can't remember which way but you can get it pretty close using that method.

[@stevehill4615]

That's about right, on SU's you have a lift pin and the setting is you momentarily lift the piston, if the revs die it's too lean and if the revs majorly pick up it's rich (slight increase is acceptable for good acceleration).

[@RetroRebuild]

I was lifting the piston with my finger and listening for the engine revs mate, but I am gonna take the carb off to set the clearance on butter fly flap thingy 👍

[@stevehill4615]

@@RetroRebuild is the carb setting tool like a T handled tube with 2 "teeth" on it and long "allen" key down the centre, because on them Strombergs don't you have to loosen the needle clamping screw (accessed through the mouth of the carb iirc) to allow the needle holder to move up & down or am I mixing up models of Strombergs?

[@RetroRebuild]

@Steve Hill that's right about the tool mate, you don't have to touch needle on this one, the tool moves it up and down, this carb can't be adjusted from the bottom of it, its the later stromberg 150 👍

[@tvdel]

Could the strips be bonded onto the door Saves messing around with clips Enjoying the videos

[@RetroRebuild]

Thank you mate, That's an idea, possibly may happen if I don't figure something out 👍

[@LeeTanczos]

Lovely. I changed the carb for a Webber on my hc 1256 years ago to try and get it running a bit more eager. And after I broke the output shaft, fitted a chevette van gearbox, slightly uprated apparently.

[@jaggass]

Are the ratio's a bit different on a Chevanne?

[@LeeTanczos]

@@jaggass from memory I think they were the same?

[@jaggass]

@@LeeTanczos It probably is as Vauxhall just carried the running gear over on the Chevette and Chevanne.

[@RetroRebuild]

Thank you, Class mate, I've been thinking about switching to a webber carb when funds allow 👍

[@lindameehan949]

Good see kids teil you car chunky

[@taxidude]

Check the diaphragm in the carburetor for tears or pinholes or even it's lost its elasticity.

[@RetroRebuild]

It's not that old but I will check mate thanks, I have a replacement one handy 👍

[@kathleenreeves324]

Great..don't hit the old ladies/ lady..😅

[@StuartOneill-u3m]

😊Beautiful car

[@nwoerad3806]

Doing up a cortina at moment,gave up a few times,but ur video's keep my going,cheers pal.

[@RetroRebuild]

Ah brilliant mate, thank you and good luck with your project! I love the cortina's 👍

[@marklittler784]

Can never have too many shelves, maybe the gate posts could be a little further apart.

[@RetroRebuild]

True mate, the gate posts are very narrow, but I broke the mirror by trying to adjust it from inside car and ripping it off😆👍

[@marklittler784]

@@RetroRebuild Maybe you could get a cheap generic glass.

[@RetroRebuild]

@Mark C Littler you can buy replacement glass for them for about a fiver mate 👍

[@marklittler784]

@@RetroRebuild Yeah because it's annoying having a broken mirror doesn't help relaxed driving like noisy wipers.

[@malcolmcowan9554]

Stick a red top in it. And a mazda mx5 6 speed gearbox in it

[@RetroRebuild]

If you've got one to donate mate I will do 😆 something like that is certainly gonna happen on the channel eventually mate 👍

[@JohnnyPaton]

Just think of the gearbox whine as "character" lol

[@RetroRebuild]

😄👍

[@Ribeirasacra]

oh look a mini me.😄

[@RetroRebuild]

😆

[@chloedevereaux1801]

never heard a viva described as feisty before.. 😜

[@RetroRebuild]

You have now 😆

[@pal555]

I remember my dad buying a viva about 30 years ago for £50 ran it for years take care leaning over the fan with your hoodie on you could easy strangle yourself with the draw string 9.18

[@RetroRebuild]

Ah class! I know mate I was thinking the same thing myself 😄👍

[@DarrenBurnham]

haha Lucas is funny ; a future KZbinr.

[@RetroRebuild]

Thanks mate, he's a cracker alright😆

[@notnewnottradecars675]

Does it smell of an old car ? I love these old motors

[@RetroRebuild]

Yes mate it's got that lovely old car smell inside and out,you know what I mean when your standing next to an old car and you can smell the gear oil and petrol 😆

[@notnewnottradecars675]

@@RetroRebuild im there ! Love that smell

[@mikeymike3240]

Those black back plates push into the bottom of the mirrors to protect the paint from the metal bottom of the mirrors, there are times when I don’t know if you are serious or not or just don’t know, DOH 🙄

[@RetroRebuild]

They go between the base plate and the car door mate they're just like a spacer gasket thingy 👍

[@LawnMowersThingsThatMakeNoise]

Im autistic and i love this channel. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 🙂

[@RetroRebuild]

🙂 thank you mate, appreciate it 👍

[@jaggass]

The engine wasn't happy was it?

[@RetroRebuild]

It's getting there now mate,i need to get the carb set up better 👍

[@TheHorsebox2]

Just wondering about this chap... haven't heard from him for some time.

[@craiggillespie8426]

Hi .you not posting videos anymore.

[@lucythemoggy1970]

steve if it's drinking fuel then it's too rich mate

[@RetroRebuild]

I'm working on getting her running well mate, tuning the carb from the manual 👍

[@brianwillson9567]

These unreliable Vauxhalls. On Friday Jane and Abi off to Buckingham palace for Abi’s gold duke of Edinburgh award. Corsa expires in Northampton. Abi, 23, fails to say, why have you parked in the middle of the road, mum. They must have made a lovely sight in the wrecker truck coming home, in their posh frocks and janes purple fascinator. Keep up the good work, mate, that little viva is going to be a cracker.

[@RetroRebuild]

😆 ah never ! Thank you mate, will do👍

[@angelsone-five7912]

When I was young and there were Vivas everywhere they all sounded like yours, a bit whiney.

[@RetroRebuild]

😄👍

[@Крот-с1у]

Двигатель покажи у меня такая машина но двух дверка

[@AlanGeorgeBates-oj9zr]

Looks like this car need a restoration this 1976 vauxhall viva need work and it's ready for the road.