A Famous YouTuber TIG Welded My Aluminum Intake! Mighty Max Ep. 21

In order to mount a front wheel drive engine in a rear wheel drive vehicle, some changes need to be made. In this episode, I got together with Justin from @TheFabricationSeries to film the modification of the 4G63t Intake Manifold for the Mighty Max. (And learn a little about TIG welding in the process!
/ @thefabricatorseries

[@deancain9387]

that was great! Laughing all the way through the video, so many real time bloopers. it is good to show real life fab so everyone understands that nothing ever goes to plan and true fabrication is about problem solving on the fly. Fantastic job on the 50k keep up the great work

[@GarageFab]

So much agreed! I used to get so aggravated when my projects never went the way they did on KZbin. Made me feel like less of a man.

[@deancain9387]

@@GarageFab do you, that always works best. Looking forward to seeing new videos 👍

[@TheFabricatorSeries]

I love this edit! It's like watching us without being there! BTW.... "Give it hell" = full speed "Nice and easy" = soft feed (let the saw do the work) Soft feed keeps the battery off of your noggin.

[@GarageFab]

Haha! So soft = boring.

[@1186javierzuniga]

I follow The Fab Series and have learned a lot from Justin's channel. It's super awesome to see u two on a collab. Keep u the awesome work!!!

[@GarageFab]

I hate to admit it, but I learned a couple things from him too. 😩

[@johnnyaltomare2422]

Ln. no on. Knob kbbk no on oh boob polo😊 youdssyy😅 😂Okay hi😅😊fy66-/43

[@DeagleBingo]

@@GarageFab i was so cocky from watching a couple of his videos 8 years ago that i said "hey i can do that too!" and immediately got a jd2 bender, junk cheap amazon tig welder and started tig welding stainless frames and rails for people's boats with no experience. ..almost broken a few wrists with corded milwaukee magnum drill and hole saws way too many times.... still learning, still not that great at fabrication compared to both of you. but i made some extra cash and my work doesn't suck ass anymore. oh and since safety and broken wrists etc etc... most dangerous tool in the vid is that band saw. even those little porta bands... will go right through your knuckle in a split second. leather gloves might give you a half a second to keep a tendon from getting cut.

[@GarageFab]

@DeagleBingo I was just considering getting a Portaband. Now I’m second guessing. 😳 I think that cockiness is immensely important. Without it, you may have never started with so much momentum and might not have gotten to where you are now. Most people are too timid to try new things.

[@DeagleBingo]

@@GarageFab as far as making things easier doing it the old fashioned way (ie no cnc tools) the portaband with a little diy table or basically a plate with a slit cut in it and clamp it to whatever and actually this little m18 cold saw from milwaukee have been the best upgrades. so just imho if one had a couple hundred to burn and wanted to make the biggest impact in metal prep (other than die grinders and angle grinders etc) its the horror fright portaband (bauer) and that hundred dollar (bare tool) mini circular saw thing for metal that have saved the most time when i wasn't using a plasma. the portaband injuries are obvious as to why they happen i think... pushing too hard on the work piece in a rush so your finger/hand slips ... or it grabs and binds. or wasnt holding the work on either side of the blade (or small enough that holding it that way wasn't possible) and it would seem like an easy thing to avoid : just don't do that right? but even knowing these things and having worked in an ER... i still almost ended up a patient in my own ER a few times fabbing tube for people on the side... the leather gloves and keeping your hands and fingers to the sides of the blade at all times is enough problably. its still way safer than a full size band saw like you were using at justin's shop. it just surprised me how easy it still was to make those mistakes a second time trying to hold smaller work and make detailed cuts. as far as usefulness i would definitely still say get the portaband, just be advised and weary and always wear the thick gloves as they give you that quarter second extra to remove your knuckles from harms way. belt sander tube polisher has been a huge godsend for me too. also if you feel like it wonder if you could ask justin at TFS to put up his cut files for that sweet folding fixture table. he got really good tolerances and makes me wanna try and cut that on my cnc plasma too. cheers man. your channel is good... filling the gap of stuff we wanna know about. keeping it simple for diy ppl is the way even if advanced tools are purchased later, and i'm sure they will be. lol. thx

[@Toyotajunkie]

Laughing so hard at the glove hairdo! Spot on bro! Love both of you guys!

[@89Mirageman]

Agreed! That shit was hilarious.

[@GarageFab]

Not gonna lie. I laughed a while after seeing the footage for the first time.

[@craigm5511]

Great two see the collaboration. Congrats on 50 episodes and 50k !

[@GarageFab]

Thank you, Craig! Good to see you again my friend.

[@russellcollier1599]

I always learn so much from each one of your shows respectively. The two of you do a great collaboration. The razzing on each other is appreciated.

[@GarageFab]

Haha! That was a really good time. We’ll be doing more in the future. Thank you, Russell!

[@ClintsStreetMachines]

Great collaboration video! Justin has a great channel. I've got a spool gun for aluminum but haven't tried using it yet. The one time I tigged aluminum makes me think the spool gun won't be easy. Grats on the 50k, that's a big deal and you deserve it.

[@GarageFab]

Thank you Clint! Definitely give that spool gun a shot! It’s for sure not “easy” but it’s not ridiculously hard either if you’ve got a decent grasp on steel MIG. You need pure argon and I’ve learned that once you get the settings right, the beginning and end of each bead is garbage so it’s best to start the weld off the work piece on a piece of scrap and end on a piece of scrap. The cut the scrap off later. I’ll likely be using the spool gun a fair amount on the next project on some aluminum sub frames. 🤔

[@ClintsStreetMachines]

@@GarageFab Excellent, thanks for the tips. I need to patch a hole in some cast aluminum so I'm glad Justin told us about melting out the impurities before welding too.

[@designandbuild3953]

Great collab video buddy, congrats on the 50K. Talent has brought you here, we're excited to see where it takes you next! Keep moving forward!

[@GarageFab]

Thank you my friend! You’re always appreciated. Sorry for the delayed responses lately. KMF!

[@dennistwitchell8821]

So many videos put me to sleep but yours always make me laugh and pay attention.

[@GarageFab]

Nice. That makes me smile Dennis. Thank you!

[@MyRestoRide]

The Justin doppelgänger at the end was worth watching the entire vid. Nice job on collab video.

[@GarageFab]

Haha! Thank you my friend!

[@austinburtch5972]

This is hilarious! You and Justin made a great video. Looking forward to more collaboration videos in the future. Great looking stunt double! 😂

[@GarageFab]

Haha! Let him know! I’m sure there will be more in the future.

[@heidielliott3881]

50 is amazing!! Great collab!!

[@GarageFab]

Woooo! Thank you, Heidi! 🙌

[@bryceweeks5498]

I just got the frame on my dakota back together after doing a z notch because of your videos. I still have a ton of work left before i can drive it, but it has turned out great so far. Thank you for the inspiration and the instruction.

[@GarageFab]

My pleasure, Bryce! Keep up the momentum. 👊

[@TravisFabel]

I love that I could actually see The fabricator guy and his reactions. One thing about his channel is he's teaching you but since you're not there messing stuff up in front of him, he doesn't have to react to it. He doesn't get to hide it this time.

[@GarageFab]

Hahaha! So true.

[@petermccuskey1832]

I have been welding for over 50 yrs and I love your attitude and skill. I enjoy your simplified instruction and narratives. I still am struggling to learn the new inverter machines but still enjoy the pursuit

[@GarageFab]

Thank you, Peter! It seems backwards but I can imagine it’s much harder to learn new hardware when you have as much experience as you have. I’m sure there’s some UNlearning involved which is really tough.

[@337amm]

I'm a righty, but after 25 years of paintball, which you learn to shoot left handed, I find myself using my drill left handed a lot. Awesome video!

[@GarageFab]

Interesting!! I’m assuming shooting around corners to the left. I’m a firearm owner. I should probably be training that exact scenario. 🤔

[@joell439]

Congratulations on the subscription count. So satisfying that people are appreciating the great content of this channel. I watched both uploads of this collaboration and learned more both times. Thank you 🙏

[@apaulothegreat1581]

It is a honor to watch two great Craftsmans having fun as they walk/travel thru life. You're the greatest both of you. 7-11-23 Getting first eyeball fix. Hopefully that Tuesday The surgeon will be at his best. I miss driving a truck and being able to weld. This is why I had to take a early retirement. Is your prayers would be welcome. Happy fourth of july brothers.

[@GarageFab]

Thank you, Apaulo. Best of luck my friend. I look forward to updates on how things went. See you soon! 👀

[@bradpage8967]

Congratulations on the 50k subscribers!!! Great content grows a channel!! I am very thankful that you stuck it out!!! Oh, and don’t feel bad about buying a TIG welder before you knew what you needed. Now I know that there are two of us!!!😁

[@GarageFab]

Haha! Sorry about the bad news, Brad. On the bright side, it appears machine prices are dropping. Maybe it was meant to be.

[@bradpage8967]

@@GarageFab luckily I bought what I was really wanting, I was just not knowledgeable enough to know any different. Sometimes you get lucky!

[@_lumpy8859]

What a treat! My two all time favorite KZbinrs!

[@GarageFab]

Nice. Thank you my friend. We’ve been discussing possibly doing some joint projects. Lemme know what you would want to see!

[@89Mirageman]

Your channel is one of the few that I stop whatever I'm doing and watch the new video right then. I've learned so much and you make it fun. I remember Justin from way back on the Mitsubishi Mirage forums. The glove on your head had me rolling!

[@GarageFab]

Haha! Thank you so much my friend. 🙏

[@TheFabricatorSeries]

The legendary 89Mirageman! I know you're still killing it, and its awesome to see a familiar name from a long time ago.

[@89Mirageman]

@TheFabricatorSeries Dann man, that means a lot! Thanks for the kind words. I'd love to shake your hand one of these days brother. Keep up the great work!

[@TheFabricatorSeries]

@89Mirageman come to Vegas and we'll all get together. I'd love to meet you too in the flesh. Maybe I can drag out a couple othel MPF guys from back in the day that are local.

[@RichRusso4218]

Love the collaboration!!!

[@GarageFab]

Thank you my friend! It was a good time.

[@michaelanderson3771]

I too have had to learn the hard way but your pre drill the hole is my Light Bulb moment of this week.

[@GarageFab]

Hahaha! The quick release hole saws are great for that.

[@juanignaciocaino]

Love you guys. I dig the "AH" vibe you pull on each other.

[@Richie5480]

Two of the Valley greats, I’m just over the hump from you guys.

[@GarageFab]

Hooray for Pahrump! I occasionally consider making the move. I hear Land is a bit cheaper and far more available.

[@Richie5480]

@@GarageFab Yeah we bought our house about 8 years ago, my is 2 shipping containers 18 feet apart and roof and walls built around, it’s almost 40x40.

[@GarageFab]

Sounds awesome. 👏

[@Will_my65gmc]

Congrats on 50,000 subscribers and 50th episode!

[@GarageFab]

Thank you Will! Hope all is well with you. 🍻

[@Elver_Galarga_jugo]

Thats what we love about you, you help us learn or give us ideas, but you also take a moment to take advice aswell. Love you man, take a blue pill and kee it up

[@GarageFab]

Thank you, Elver. Love you back, Brother.

[@antonyedgar3453]

KZbin recommended your gow to weld vid. Your humor, presentation and ability to get stuff across well brought me to this vid. I have watched loads of Jaysons stuff, he is really informative and funny. You both together was hilarious! Leant loads as well as laughing loads. Cheers for the brilliant content. 👏

[@GarageFab]

Thank you, Antony! That means a lot to me. I appreciate your time watching. Thank you for the kind words my friend. 🙏

[@philjafo2]

Congrats on 50 episodes and 50k, keep going.

[@GarageFab]

Thank you, Phil! Imma go till I can’t anymore. 👊

[@seanalexander9531]

Two of the *smoothest* YT fabricators out there - awesome video. Thanks!

[@tezsullivan6048]

Congrats on the 50th episode and 50000 subscribers👍 that was a great collaboration, I watch both your channels. Great tips on welding cast aluminum, or as we say in Australia, Aluminium. Thanks again, great to see you both having a laugh. 👍

[@GarageFab]

Thank you Tez! I think we’re the only ones in the world that say aluminum. I’ve got family in England that would agree with you. That could only mean that we’re the weird ones. 😆 Cheers my friend!

[@bearcoatcustoms3619]

Congratulations on the 50 ! Always looking forward to your next video.

[@GarageFab]

Thank you my friend! 🙏

[@imcanika2715]

from Mexico i can say: Nice colaboration work !! thank you for show us how to tig weld all or many tips and tricks like this!! Congratulations..

[@GarageFab]

Hola! Thank you very much my friend.

[@4thgenZ28]

Great collaboration, and I hope you two do more! I have been following you both for a long while and to see you all working together and having laughs just made my day.

[@GarageFab]

It was a good time! There will likely be more in the future. Thank you for your time my friend!

[@JustinPaul1st]

Congratulations on 50.2K viewers...very nice colaborations...well done on you mate

[@GarageFab]

Thank you, Justin! Cheers!

[@ypaulbrown]

Hey guys, this is a very interesting presentation........having watched you guys in your other programs....this was marvelous, Cheers from Florida, Paulie Brown

[@GarageFab]

Thank you, Paulie!

[@egorich2316]

Eine Arbeit, die Spaß macht, ist immer besser als nur Arbeit. Schönes Video. Schöne Arbeit. Ich freue mich auf die Fortsetzung.👍👍👍

[@larryreece1403]

Great video. As a welder I can tell you we all Dip the tungsten once in while!

[@GarageFab]

Well that’s good. I thought he was faking knowing how to weld this whole time!

[@markrs2000]

Another really good show.

[@GarageFab]

Thank you, Mark!

[@Cantthinkofahandle117]

Before cordless impacts were a thing, I was running a 19.2v Porter Cable drill with a heavy-ass nicad battery for work. I got my bell rung once or twice because I never bothered with the clutch. I feel your pain, brother 😂

[@commonsenseisdeadin2024]

And I bet you still don't bother with the clutch! We don't have time for that... We don't have time to go buy a new drill either but we take those chances! (Am I the only one who got angry at the drill and broke it? Clearly it's the drills fault! ***this is a joke)

[@faroironandcustoms6577]

Brilliant!!! I saw Justin's video when it dropped. He makes TIG welding look effortless. Looking forward to the next one!!!!

[@GarageFab]

Indeed! I think I’m going to bug him for some lessons.

[@cotybrown1226]

Congrats on the 50k subs! And awesome collab with TFS. Looking forward to the next 50 episodes.

[@woodnwaveracer]

You deserve so many more subs. You do an amazing job with your channel. It's helped me a lot with my current project. I have rewatched several episodes to help get my project moving.

[@rwbodiford]

I knew it was only a matter of time before you two crossed official KZbin paths, love to see it!

[@GarageFab]

It was a good time!

[@38Chev572]

Congratulations on reaching 50K Subs. I knew early on you , and your skills would very successful on YT. Keep moving forward!

[@GarageFab]

Thank you my friend! We are getting there! 🙌 Weeeeeeee!!!

[@tsstn]

Big congratulations on the 50k brother. A fantastic accomplishment and well deserved. Also a great video and amazing colaboration. What an awesome opportunity. You surely made the most of it.

[@GarageFab]

Thank you my friend! 🙏 You are so very much appreciated.

[@soltribeprojects2055]

Can't enough of your videos man ❤KMF

[@GarageFab]

Yes!!! 🙌 You’re gonna be stoked when you see the hats that are being made right now. 😉 Thank you my friend. 🙏

[@gasd6542]

Tip: When you're blending aluminum like you did with that radius, try using a 90⁰ die grinder with a 2" wheel. It gives so much more control than a large flat grinder. Plus, you only have to change out the disc, not the mandrel. You can go from 120 grit to scotchbrite with the setup. Good luck and great videos.

[@GarageFab]

Thank you my friend! 🙏

[@cynthiazanone8612]

Congrats on the 50,000 subs, sir! 🎉

[@GarageFab]

Thank you, Sis! ❤️

[@HeavyHiitter]

just stumbled on this channel. Damn hilarious. The stunt double got me, lol!! Been on Justin's channel for a while, and the collab is great.

[@GarageFab]

😆 Thank you my friend! I appreciate your time and kind words. It was a good time.

[@dekebell3307]

That was fun to watch man! Loved it!

[@GarageFab]

Thank you, Deke! 🙌

[@tborkman]

You always do such a great job on your videos. It keeps me entertained and I love your personality.

[@darrinfraser]

Loved it! Very cool collaboration! Also very cool throttle body swap. Just goes to show you that anything is possible. Hope life is treating you well. Keep up the awesomeness.

[@GarageFab]

So true. All is possible. Not everything is affordable!! But definitely possible.

[@jasonfikes9514]

Love all the left in bloopers. Congratulations on 50k subscribers. Great video as always. ✌️😁

[@peters5333]

I like the way you work with Mr Tig (Wyatt....) I mean Justin. Look forward to seeing more of these episodes.

[@anthonynardini4295]

Great episode! The banter between you both kept me laughing the whole time, you had a straight guy/funny guy dynamic between you. Not to mention, Justin is a very skilled fabricator, the two of you together could cause major trouble!

[@GarageFab]

Haha! Thank you Anthony! Glad you enjoyed. Will probably be doing some more stuff together in the future. It was a good time. 🙌

[@turboflush]

Your 50k will probably jump after this collaboration. Can't belive I have watched 50 episodes. Keep it up brotha.

[@VictorMPR]

That’s 50 effing awesome videos. Thank you for your efforts!

[@GarageFab]

Thank YOU, Victor! 🙏

[@matthewpeterson3329]

Awesome! I love seeing two of my favorite channels collaborate. You two knuckleheads should do more content together... y'all are damned funny together.

[@GarageFab]

There will certainly be more Matthew! It was a great time.

[@rgl_motorsports]

I saw Justin's video when it came out. Been waiting for this one ever since.

[@robertrusso877]

Well that was a fun collab and congrats on the 50k subs! Another step in the transformation is complete. Waiting on the next video. Thanks!

[@scottsprague9974]

Congratulations on 50000. Your information helps on anything we maybe be building. Thank you for all the entertainment.

[@jayinmi3706]

Great video! I think the last TFS video I watched was when he was building the frame for his minitruck. Also, I was at the junkyard this morning and came across a D50 with a mint dash, bench seat and pretty nice door panels. The sticker on the bed side said it was a 92 1500. lol

[@GarageFab]

Haha!! Brilliant.

[@iceman45ification1]

That was hilarious!! 😂 Loved this episode!! Love how that manifold turned out too. 👌 I was going to mention that would've probably been cool to find a 2.4 engine out of an 80's era Mitsubishi Starion turbo. Those were some really cool cars too. Really hard to get ahold of one those these days though. Great video my friend!! 💪🔥

[@IronGordon]

Congrats on 50 and 50k 🎉🎉🎉

[@GarageFab]

Thank you my man!! 🙌

[@path3853]

Congratulations on the 50K and as always, great video.

[@johnc7431]

I enjoyed watching your video. Extremely funny and entertaining. I can say I actually did learn a little bit more how he hated the metal up on the casting. It was funny watching you guys Bond. Excellent video like all the others

[@GarageFab]

Thank you, John! I’m thrilled you enjoyed. Cheers!

[@bryanmaynard905]

Congratulations!

[@solicitouscomics9478]

I have done the left-hand trick but i never thought of using the clutch lesson learned thank you.

[@andyb7754]

Fantastic video ! I was watching Justin when he was working out of a small garage doing fab work. Have him teach you to Tig weld (take his course) so you can add an extra bit extra skill to you shop (I would, but I think this 70 year old would take too long to learn). Thanks for the video.

[@GarageFab]

Thank you, Andy! I will definitely be taking some courses. My next project is going to have a significant amount of aluminum welding, and I can’t afford to pay someone else to do it.

[@tdeje]

Great Stuff !

[@GarageFab]

Thank you Tom!

[@DinasGarage]

Congratulations brother! Well deserved! Glad I have found you so long ago! Keep moving forward!

[@JonathanWhoever]

Another great vid, thanks.

[@GarageFab]

Thank you, Jonathan!

[@Iowa599]

That reminds me, TIG sunburned me bad! It's worse than MIG or ARC! I added a lightweight, but opaque, long sleeve work jacket to my welding bag. It is pretty warm to wear a jacket on hot days, but it's better than the next day (if I don't wear it when TIGing!)

[@GarageFab]

I haven’t done any TIGging myself so I haven’t experienced the burn yet. I can’t imagine wearing a sleeve, especially in this weather, but yours sounds bearable.

[@paulnewton943]

Funny as man. Enjoyed it to the end, you now know why you have 50k of us tuned in

[@GarageFab]

Thank you so much, Paul. I appreciate your time.

[@ronbelldvm]

Great tips using the hole saw. I've not gotten smacked in the face, before, but have sprained my wrist using one, so the clutch and left hand tips are going into my bag of tricks to be pulled out next time I use the hole saw. I really enjoy both channels, and enjoyed watching you both working together. Congrats on 50K subscribers.

[@brandonensing7444]

I love tfs! His videos are what got me started on learning to tig weld! Loved the video!

[@GarageFab]

Eh. He’s ok I guess. 😆 Thank you, Brandon!

[@jonathanwiggill8242]

Best Arc Shot.

[@GarageFab]

🙌 Much appreciated, Jonathan.

[@michaelanderson3771]

Congrats on 50K Aaron. Lets get 100K by your 100th video. Keep them coming. Looking with bated breath for the mini truck with quad bike chassis and the bike engine

[@GarageFab]

I can’t wait either! Once it cools off a bit here in Vegas, I’ll likely work on it in the back yard. The goal is to make it street legal. Don’t know if it’s possible but I’m gonna try. Thank you Michael! With the rate things are going, we’ll get to 100k LONG before 100 videos. Probably before 60 even. 😳 We’ll see!!

[@jdwisdom9433]

I learned some promising techniques that will come in handy! Thanks for the HUmor! JD

[@KARR]

Cool seeing justin cutting up with you!

[@FilamEFX]

Congrats on 50k. Good job mate.

[@GarageFab]

Thank you my friend. 🙏

[@ronwalsh]

Had to subscribe after this video. Fits my style directly. I cannot do any of the things you do, but I am slowly learning.

[@GarageFab]

Even without knowing you I’m pretty confident you can do the majority of the things I do. Having the proper tools is the most frustrating setback.

[@Flaw_Less_Farms]

Thank you sir for the 2hr rabbit hole. Very well done sir!

[@GarageFab]

Haha! My pleasure my friend.

[@frankdeon6539]

Loved it.

[@GarageFab]

Thank you, Frank!

[@nerophine]

im actually a big fan of him !!! its soooo freaking cool when you see cool ppl collaborate !!

[@GarageFab]

It was a cool experience! 🙌 Thank you my friend.

[@dirtychina5331]

Try using the clutch settings while driving drywall screws into drywall. Its mainly used to set the depth of he screw head so it doesn't blow through the cardboard layer during installation. Im sure there's many other ways to use it but drywalling is where its most effective. While drilling straight torque and a strong grip works best.😊

[@GarageFab]

I try not to do drywall! But if I can’t avoid it I’ll certainly give it try! Thank you!

[@LimitedGunnerGM]

As much heckling as you and Justin do to each other, I was expecting you to pull out some Alumi-Weld rods from Harbor Freight.

[@GarageFab]

I love those! Does Harbor Freight have them?!

[@LimitedGunnerGM]

@@GarageFab sure do, subtly placed in their welding supplies.

[@Elver_Galarga_jugo]

Would love to see more content with you two, especially since justin also has a truck hes building iirc

[@GarageFab]

I’m sure it’ll happen. Let him know you want to see it! I’m sure he’ll be getting back on his truck before too long.

[@brianluck84]

Tell the fabrication series to finish his damn mighty max!

[@rocky19811969]

Pretty cool things happening with you man!! Happy for ya

[@GarageFab]

Thank you, Rocky! It’s been a fun ride so far.

[@rocky19811969]

@GarageFab lmaoo man that's hilarious my name is John. I just realized profile name is rocky from my teen yrs. ROFL..right on brotha kp up the amazing work

[@GarageFab]

Too late. I’ve already committed Rocky to memory. 😆 Thank you, John.

[@marcusluna6977]

Good detailed video. We are lucky in Vegas to have you guys! True inspiration, brings me back when I get pissed because my stuff always messes up, like the drill smacking me or twising my arm, etc. 😂

[@GarageFab]

Haha! True happiness comes when you can learn to laugh at getting smacked in the face. 😆 Thank you, Marcus!!

[@itzamedave6242]

true entertainment as usual had me in stitches glad you didn't get any lol great content as usual sorry I'm a day late lol

[@GarageFab]

Haha! Well sorry I’m 4 WEEKS late Dave! These comments have gotten out of control. Just know you’re always appreciated and I’ll always consider you an OG Garage Fabber, even if you don’t hear from me. Hope all is well my friend. 🍻

[@itzamedave6242]

@@GarageFab no worries You're clearly busy and I don't expect a response to be honest lol and I'm not on Instagram anymore but it is good to hear back from you from time to time

[@davidthompson245]

True professionals!, enjoying your content!!

[@GarageFab]

Thank you, David!

[@drewbrouder4233]

VERY interested in this engine conversion series...

[@GarageFab]

Thank you, Drew!

[@drewbrouder4233]

@@GarageFab thank you for the fantastic walk through tutorials I own a 1994 Mitsubishi Triton lwb (Australian mighty max) with a Weber blow through turbo setup I'd love to do this engine conversion

[@drewbrouder4233]

I am learning a lot from you thanks again

[@leslieaustin151]

Well done! I’m enjoying all you do, and I’m certainly not doing any hot-rod custom stuff. More like 125cc motorcycles, but it’s still relevant to me. Thanks. Les in UK

[@Elevator74]

"Hope you have good health insurance" - Beat Drops - Welding Happens. Congrats on the 50k friend!

[@GarageFab]

Haha! Thank you, Kenneth!

[@somewhatfast]

2 of my favorite channels. Awesome

[@GarageFab]

Thank you my friend. 🙏

[@mattvelardes8072]

Great video! Always entertaining.

[@val.2283]

Много людей в России смотрят твои видео, но не все понимают английский язык.... Всего самого наилучшего и добра!!!