A Ferocious Ferrous Metal Remover! 3D GLW Series Iron Remover!

[@apexdetail85]

My absolute favorite ferrous metal remover is Fireball Iron Burn. Which is your favorite?

[@MNpicker]

Oberk Wheel Cleaner / iron decon has been my go to for close to a year now and has has been working great for me.. yes..a little spendy...but ohhhh mannnnnn👌

[@gordonliddy9418]

The meguiars ultimate wheel cleaner seems ok for the money. Do like car pro iron x but the price is too high for me.

[@1stfrompuertorico568]

As iron remover I like Bilt Hamber Korrosol

[@LilRick96]

Fireball Iron Burn SE. Potent stuff 🔥💯

[@mattmarnella1375]

Believe or not I'm still using eagle one. When they stopped selling it or discontinued it, Ollies got a few cases for $4/bottle so I think I grabbed 8-9 bottles of it. Still my go to. Megs ultimate is ok, easy to get a bottle if needed. Adams is also good, slightly weaker but works. Haven't tried many but eventually I'll run out of my eagle one. Don't think I'd spend more than $15 for an iron remover so this may be out.

[@pappajohn8912]

I love your content. No intro needed… Thank you!

[@ckone671]

NO intro or Outro needed, straight to the point is best! Awesome vids man!

[@RongDuck]

I wouldn't miss the intro. Getting right to it is always a welcome relief.

[@mikea5205]

No need for intro/outro...straight to the point is how we like it. Thanks Brian.

[@jimrogiokos9690]

Quick intro with a Blue Logo for Apex . This goes well with your Blue Collar products as a subtle reminder of your products .

[@apexdetail85]

I appreciate the feedback....thank you.

[@neilwalker5041]

I think the audio and video sounds and looks great! This truck was hammered with iron and the iron remover worked very well. The new 3D line looks to work extremely well with what you have shown! Thank you for the video. Intros are good to keep your work fresh but do not put a lot of money into one.

[@barrybij8079]

No intros needed... I always fast forward past

[@limoman4125]

Same here hit the 10 sec button twice and get to the video

[@AJ56]

Remove the intro, agreed!

[@TheMstwntdLMSV123]

I personally really enjoy the intros. They've been a staple of your videos for such a long time

[@Ricky_R]

No intro needed Brian, just your great content and knowledge 🍻🍻🍻

[@BelLavoroAutoSpa]

Seriously the best (or least worse) smelling iron remover I have used. shame it is too costly for professional use vs the competition.

[@steveclark2426]

I love your honest reviews on products and all of your advice. I always fast forward the intro. My vote is not to bother with them. Thanks

[@richardseem7948]

Ur family doesn't care what you do we are here 2 see you and ur amazing videos that no doubt has helped thousands I'm I'm 1 of the lucky ones...

[@yanniobkirk5744]

3D was bought out by a private equity firm called MPE Partners and one of their portfolio companies Hi-Tech Industries. Looks like 3D adds to their portfolio and is not a duplication. There was concern that these new products were formulas from another company just sold under the 3D brand. Probably not so. Tunch is no longer driving decisions and direction at 3D. Make no mistake. Private equity has one goal in mind - maximizing profits. If a decision they make benefits consumers it’s only because it also improves profits.

[@apexdetail85]

Thanks for the info.

[@MNpicker]

Straight and to the point is a very good thing 😀👍🏻

[@millerdetailing4176]

Great video Brian ,looks like it works well overall. I’m curious if the Adams iron remover that’s been reformulated is any better. For price purposes it would definitely be the cheaper option.

[@lucasaubin1661]

You should look at Labocosmetica sidero. You can dilute it 1:4 and at that dilution it is as effective as others like gyeon iron, IronX, etc. It is the cheapest effective iron remover by far

[@cmongimme]

Agreed...I usually fast forward thru all videos

[@cmongimme]

Intros

[@jerryscorolla602]

Great videos every time, simple not complicated. No need for GoT style introductions like most channels do😂

[@keithknechg3217]

Any tips for seeing a reaction and if its satisfactory for black paint?

[@apexdetail85]

Great for any color… you will see the color change.

[@dhaladetailing1225]

No intro / outdoor required! We all like the meat n potatoes without the excessive audio and graphics.

[@jonschmunk7719]

Thanks for your review Brian. My favorite is Gyeon Iron.

[@richardf9137]

Great Sound and Video Quality!!

[@Mzek2112]

Iron removers are a tough category for me as the price is so high most times. I've used many in the past, but considering this is the same price as the Adam's IR, then I'd give it a try. I've sat comfortably on the Adam's for a while now (just be sure to shake it) because of the $50/gal spot. Once product breaks a certain point for me, I'm out, as that make me far less profit. Brian, with that said, how would you compare this to Adam's, if you've ever used it?

[@bigd9848]

Another great video Brian 👊🏼

[@derrick8064]

Hey Brain. Do you like this iron remover more the Fireball iron burn?

[@peterjurenovskis5933]

I enjoy 3D products. I have seen some youtube sources using the iron remover (spray on) and using it as a lubricant for claying (to save time). Thoughts?

[@OraEtLabora0]

🤔8:45 clay-bar because it was so neglected AND you were correcting it after or because you don't yet do the Perforated Synthetic Decontamination Towel ?🤔

[@apexdetail85]

Correction was to immediately follow.👍🏻

[@chrisrochester4511]

Great video! My favorite is Gyeon Iron. Love your videos but usually skip the into.

[@kimnewling5728]

Would you say this is as good or better then Carpro IronX? Thanks for review. I like your introduction. Resets my mind from what im doing to concentrating on the video.

[@apexdetail85]

On the same level…as good.

[@47KRO]

Hi there, awesome review as always. Not sure if you still check messages from older videos but if you need another input on your intro, I would have suggested to leave the intro only like an AD if possible, for the ones that don`t have yt prem.

[@ryancowles5633]

P&S iron buster is my preferred iron remover but it’s just so expensive. It REALLY works but just not economical. I’d say either Adams iron remover or this would be a more economical solution. I’ve tried the meguiars stuff and it just doesn’t work as well as the previous mentioned two products

[@asymptomatic84]

How's it compare to gyeon iron and carpro iron x

[@perfectshineofjax]

I like just starting the video.

[@alexgutierrez3349]

Does this product stain the floor? Cement/asphalt etc

[@epattonm]

Sheesh that truck had a lot of iron deposits on it! Do you apply iron remover on dry or wet paint? When working a panel at a time, i always have overspray on my next panel, so ive done it when wet.

[@apexdetail85]

I like it on dry paint to avoid it being diluted.

[@tommyholt3465]

3D’s BDX is $85.99 a gallon and it’s excellent. I’m not sure offering this product at $49.99 for 64oz. ($100 a gallon) is good news if BDX is discontinued so as not to compete with the glw product. Hopefully the nano pails stay in the line as well.

[@beebop4333]

QUESTION if the iron is under the clearcoat already rusting and ruining the paint, will the spray on iron cleaner ruin the entire clearcoat or paint where no spots are? Do u have to claybar after you apply?

[@yanniobkirk5744]

No and no. Get the iron out as soon as you can. If the metal of the car is already rusting you can’t stop it. Have you cut it out and repair.

[@apexdetail85]

The iron remover will not do more harm than the oxidation and ferrous metal already has.

[@danmorrissette4814]

no need for intro Boss! 3D does have a good line of products..i usually activate iron removers after it does its magic, i use Optimum Ferex and use it as a clay lube after its done decon, 2 step in 1 really, a good time saving trick, was given to me By Yvan Lacroix

[@OraEtLabora0]

5:46 EXACTLY! remove, i always skip it anyway. it's at least 3x right-arrow (5s each) to get me over it, on desktop. btw for top-tips, watch 2h interview with Mr.Beast on how he does his viral videos...he doesn't need intro/outro...

[@JohnMedved]

Glad you're asking Brian. I love your videos and appreciate all of the information you provide, but I really don't like your current intro and skip it every time. I vote for getting rid of it and just get right into the action. Thanks again for so much good info on your channel.

[@superado2k]

Keep in mind that if ordered from 3D that shipping is free.. they often offer 20-25% OFF... and you accululate points thar can be used as cash toward future purchases

[@kennythomsonjr5553]

Video only, thank you

[@mikeyp2447]

Great video! No intro.

[@superado2k]

How was the smell? Full on rotten egg or masked any at all?

[@apexdetail85]

Not bad… not as strong as others.

[@paul6749]

Thanks for the high quality video. Glad you mentioned maybe dropping the intro - they annoy me. I always felt your intro was too long. John from Forensic Detailing has no intro but shows his logo in his garage at the start of each video to help reinforce the “brand” identity. Pan the Organiser’s intro is OK - it’s nice and short!😊

[@ETPAK]

In n out. Thanks.

[@robertcarnochan9454]

Skip intro outro and get to the point … love that about your channel!!!!

[@inoagaiwhodetails]

THE NEW 3D OWNERS SHOULD KEEP QUALITY AND FIND A WAY TO KEEP PRICES LOW. SELL GALLONS TOO

[@yanniobkirk5744]

Their goal is increased profits.

[@aldaley3537]

Intro and outro is of benefit to new subscribers.

[@norcalspitshine6406]

Nice

[@Chris-wb7ni]

Gyeon iron remover. After using it I don’t know if I can switch. Does the 3D smell like rotten eggs

[@Xaviers300ZX]

I usually skip intos if they're longer than 2 or 3 seconds 😅

[@archiepezek]

Another informative video Brian. As far as the intro is concerned, I'd rather not see one. I even skip past the longer ones on other channels. Thank you for asking.

[@apexdetail85]

I truly appreciate the feedback....thank you. I agree.

[@richsmith3120]

It seems to work like other iron removal chemicals.

[@apexdetail85]

With the exception that I have not needed to repeat the step no matter how bad the contamination has been. Some out there.....I do.

[@denniscolyn5435]

The content is great and always appreciated however I always skip the intro.

[@pwrshots]

I’ve used carpro’s Ironx. Stuff smells like pot🧐

[@TimPaddy]

If you keep the intro, I'd appreciate a lower sound level

[@jtekdryice]

Ditch the intro, straight to the content, save you're time and mine 👌

[@goldenbear31]

Skip intro. Thanks!

[@blademan7671]

Intros are fine. Interesting to see the intros evolve over time

[@angl8317]

Get in and get out… the only way

[@MarkSegree]

My 2 cents: Open up with your product intro, then skip to the 12 second mark of your intro video where the logo is revealing, then get to the process. Summary: This let's you keep the professional look for new comers to the channel while making the OGs not want to fast forward the video.

[@SpringVinMoto]

Shorter intro. Do not eliminate. You need some kind of branding so we know who it is. Short and simple

[@Enthusiast_detailing]

Don’t mind intros really but sometimes I do skip them so probably better off without them.

[@FullCeramicDetail]

Just ignore working on the intro - I'd rather it get into the video right away. My 2 cents.

[@nateludy6749]

We dont need any intros.

[@chrishendley8652]

I always fast forward everyone’s first few minutes because the intros are just tiresome

[@LaMa-fx2yn]

Not see one

[@danielnielsen5499]

Not a big fan of intros, long ones are especially annoying.

[@WHEELSRT7]

Replace intro and outro with humor during the vid.

[@glodavhog]

thanks for NOT having an intro. love your videos but intro and outro is not needed

[@1stfrompuertorico568]

First!!!

[@aliaskink]

Just stop hummer boy. You give such great hummers

[@danakern2440]

I suppose the intros are unnecessary but if you do change it for a new one please include the shop manager❤

[@dustin3700]

Ads, commercials, intros and outros are just irrelevant and irritating and take away value of videos.

[@toddn.3123]

Ditch the intro. It's a waste of time.