A highly unusual gaming chair - ThunderX3 Core Review

Prawn here with a look at a really interesting and remarkably comfortable gaming chair that I'm a big fan of. With one big caveat - stick to the end of the video to see that!
Anyway, this is the ThunderX3 Core gaming chair. A chair that offers all the usual customisation in terms of position (reclining, tilting and more), with 4D arm rests and such, but has other highlights that I've not seen elsewhere like a lumbar support module that moves with you. So it adjusts left and right and tilts back and forth as you shift around in your chair.
Other highlights include a large footrest that alternatively acts as a rest for your arms when using a controller, a plush headcushion and some superbly padded arm rests too.
The ThunderX3 Core might be one of the best gaming chairs I've tried, though it is unfortunately squeaky.
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions. Unless otherwise stated, the videos are not sponsored financially.
Please note links listed here include affiliate links which may earn me a commission. Find out more below.*
Amazon US - amzn.to/4a6ssIU
Amazon UK - amzn.to/483frhc
Overclockers - tidd.ly/4a5XsbL
Amazon FR - amzn.to/3GuabHQ
Amazon IT - amzn.to/3R6akpQ
Amazon DE - amzn.to/3tbwajD
CaseKing - tidd.ly/3TgXzey
Amazon CA - amzn.to/3R5YWdx
See the official site - thunderx3.com/...
Specs of this chair:
Model CORE MODERN
Recommended weight 150kg / 331lbs
Frame type Steel
Surface material Leatherette
Weave Fabric
Inner Material​ Molding Foam
Latex Foam
Base Size & Type Aluminum, 350mm
Caster Size & Material 75mm / PU Scratch-resistant
Gas lift class & traveling BIFMA tested class level 4, max. 80/100mm
Lumbar support CORE.RDY 360 TECH
Mechanism Type SYNC6, Multi-adjustable
Tilt Type Synchronous Tilt
Forward Tilt
Lock Multi-angle
Adjustable Armrests 4D With Cushion, Lockable
Adjustable Seat 2-in-1 Up & Down, Front & Back
Footrest 3-in-1 Multipurpose Footrest
Headrest Memory Foam
Up & Down Adjustable
2-in-1 Neck & Side Support
Chair height (A) 134-144cm
Backrest width (B) 59cm
Backrest length (C) 91cm
Seat width (D) 55cm
Seat depth (E) 48-55cm
Seat thickness (F) 12cm​
Seat height to floor (G) 46-56cm​
Armrests width (H) 68-72cm​
Armrests height to floor (I) 66-83cm​
Base width (J) 70cm​
🏆Big thanks to my super awesome KZbin members:
SirSpawnsALot, Meatykeyboard, Rawrr483, Space Cannons, Mike S, Jay Shank 007, Jason Morgan, Starastin, McFarty, Chief Hao, Kraken Tortoise, Chris Thompson, Lank Wimb, Bhushan Mahesh Gandhi, Roburrt, isgursoy, Beaster Bunny and Gaming Nomad.
Want to send me things for videos or other reasons? Use this address:
The Provoked Prawn
PO Box 13277
MANNINGTREE
CO11 9BE
United Kingdom
🔫Sub to my gaming channel🔫 / @theprovokedprawnpews
Come check me out on Twitch - / provokedprawn
Join my Discord to keep up to date or ask questions / discord
Follow on Reddit / theprovokedprawn
Read this far? You're awesome. Smash those sub and like buttons!
📌 Support the channel:
😍 See the benefits of being a member here - / @theprovokedprawn
Get some merch - the-provoked-p...
Check out my dedicated Amazon Storefront to see my current fave gear - www.amazon.com...
📸 Recorded with amzn.to/3kYrhGP

[@JosephDalrymple]

I was actually just about to buy one of these when I found out that they sell to pretty much everyone except for the US. hahah

[@TheProvokedPrawn]

Sorry to hear it

[@svlagonda7417]

The lumbar on this is soooo uncomfortable as it doesn't adjust.

[@TheProvokedPrawn]

it moves as you do though? But yes, it doesn't adjust in or out. So I suppose it depends on your body shape and height.

[@svlagonda7417]

Which makes it pointless as everyone is completely different in terms of body size/shape/height etc. It's like the Razer Ishkur ie completely OTT/absurd lumbar pad. I bought this chair 'blind' and have been regretting it ever since. @@TheProvokedPrawn

[@googlereviewer1944]

I've tried this chair as well and the lumbar support is just too aggressive. I found that I had to slouch to try and avoid the non-movable lumbar section which just isn't good for your back in the long term. People are far better off buying a proper ergonomic office chair. @gavlatennis2824

[@Blurris.]

i agree, my back hurts alot after 3 days. returning it now

[@googlereviewer1944]

Never buy plastic leather. It's cracks easily and starts looking very tatty very quickly. Not a very breathable material either.

[@paft]

Yep, after 3 years (if the chair doesn't fail) it will look a mess, unless you only wear silk PJ's on it. I cannot comment on this chair, but in my experience it is a bad choice for longevity.

[@mikesunboxing]

I have been testing out this exact chair as well and can say i am in agreement with the points mentioned, and as far as lumbar support goes, this is without doubt the most supportive chair i have ever used

[@TheProvokedPrawn]

Does yours squeak too?

[@mikesunboxing]

@@TheProvokedPrawnyes it does a little, I thought it was where the back was rubbing on the Kallax units behind me

[@morbid6944]

I got this chair a couple of months ago and I've got to say the lumbar support was a complete game changer for me. I've never experienced something like it. I'd like to comment on the squeaking though! I opted for the grey fabric version which has no squeak! But have noticed in other peoples reviews that bought the pu leather version that it was squeaking for them so I am guessing it's maybe because of the material? Maybe something for people to consider when buying this chair.

[@TheProvokedPrawn]

Thanks for sharing!

[@audiojunkie5435]

It definitely sounds like the PU leather rubbing. It's crazy how things like this get overlooked, especially as the lumbar mechanism is supposed to move constantly...

[@mantanomix8442]

How tall are you? Is it comfortable to sit in the chair if you are 168cm tall?

[@TheProvokedPrawn]

175cm so should be

[@soulhax]

Just got this chair yesterday and I must say that I really like the back support and it's innovative BUT the chair itself is wobbly and makes sounds. Like you can feel small bumps when moving front and back and just the usual usage. I don't even know how to explain it.

[@JackInDaBoxx]

Just got this to replace my old SecretLab. Thunderx3 wins. For the price it is way better value for the back support you get. The arm rests are so so comfortable. The material and build quality is on par with SecretLab. Overall a better chair for the money you're paying.

[@bonanzabrandon6877]

I've been using the Herman Miller Embody for over 6 months now and, while it's not cushy, it does provide the support that I need to work at my desk comfortably for long hours. Finding the right chair for you is difficult, but also very important.

[@TheProvokedPrawn]

Nice. Glad you're enjoying it. I'm planning on selling mine to see if I can recoup some of the losses.

[@bonanzabrandon6877]

@@TheProvokedPrawn Have you considered trying out the Haworth Fern? I watched a bunch of reviews on it, and it seems very popular. It was my second choice after the Embody.

[@audiojunkie5435]

Top tip: GT Omega have recently started selling a head cushion which should really suit headphones users. The cushion supplied with the core will constantly bump headphones with 50mm drivers.

[@jadygamez2026]

Should I get this chair or the SecretLabs Titan Evo?

[@jamestombling4665]

This or the Razer iskur v2, razer enki or enki pro? Chair wouldnt get much use, just want something thats comfortable on my cheeks but still offers decent back support.

[@TheProvokedPrawn]

I've only tried one of the Razer chasers and it's decent but I prefer this.

[@silverfang9227]

Is the seat and lumbar firm? Had a secretlab evo and Razer enki and both where to firm for me.

[@marcioantoniodorazio9235]

Even better than razer iskur v2?

[@RickStumbo]

I have a question about the lumbar support. How is it attached to the chair? I had a chair with a very similar lumbar support but it had a fatal flaw. It attached to the chair by sliding UP into a bracket on the chair back. Unfortunately, this led to the lumbar support sliding back down and falling out if you moved around enough. If they had flipped that bracket where it slid DOWN into the chair it would have been amazing.

[@mikesunboxing]

it is on a massive spring and the whole thing moves to contour your back without needing any adjustment

[@PinKeeDJ]

6:28 I see you've stocked up with Irn Bru in case you overuse the green Jack we can see in the background :D

[@TheProvokedPrawn]

Green jack?

[@a.r.1611]

Are you still using this chair, and if so how has it held up?

[@TheProvokedPrawn]

I am and I still like it. Though the squeak is driving me nuts as it gets picked up by my mic a lot and I'm worried people will think I'm farting. But that's ok, because they I just do my voice overs standing up which is better for me anyway haha

[@Kaido128]

How'd you know that I was was watching chair reviews lately

[@TheProvokedPrawn]

I know things!

[@rayvarnson8976]

At At $1,500 USD, no thanks.

[@TheProvokedPrawn]

Whaaaat. That must be a dodgy seller

[@lambbosbread123]

its not 1500 usd LOL