A Jeep Mod we didn't know was possible

#dirtroadcred #jeep #jeepwrangler #jeepgladiator
A Jeep Mod we didn't know was possible
Today, we're thrilled to be installing custom Jeep Wrangler JL and Jeep Gladiator shift knobs for the first time. These shift knobs feature completely licensed Jeep emblems and factory paint codes. We've customized the shift knobs for our 2024 Jeep Wrangler 392, 2024 Jeep Wrangler 2-door Sport, and 2022 Jeep Wrangler JL. Let us know which modification is your favorite!
Check out American Brother Design! (Use code DRC10 at checkout for 10% off!)
bit.ly/AmericanBrotherDesign
“If you buy through affiliate links, we may earn commissions, which help support our channel. “
Order your next Jeep Wrangler or Jeep Gladiator from the Jeep experts at Dan Cummins! (Exclusive DRC Pricing)
bit.ly/DealershipAffiliate
New Shirts Here!
www.dirtroadcredmedia.com/pro...
Best paint-matched parts Jeep parts in the country!
www.distinctionapplied.com/?r...
Buy a 2024 Jeep Wrangler Grille!
www.distinctionapplied.com/?r...
Bulletpoint Phone Mounts (Use DRC10 at Checkout for 10% Off)
bit.ly/bulletpointmounts
Check out our Amazon Store
www.amazon.com/shop/dirtroadcred
-------------------------------------------------------------
Email: [e-mail]
Patreon: bit.ly/DRCPatreon
Instagram: @dirtroadcred
-------------------------------------------------------------

[@Dmh06178]

Love the look of the new shifters on all three Jeeps! Thanks for showing us the install

[@randyroy3163]

All of them came out great 👍Up . I'm looking them up right now

[@philkane4390]

Cool mod .. knobs look great! Thanks for this.

[@jordanfields3402]

Awesome video. One thing extra I would do is stuff a clean rag in the opening so as not to drop any screws into the transmission opening. I do occasionally have a case of butter fingers.🧈

[@GoXplr]

Yep …. That’s me too

[@wailingalen]

Me too

[@Outlawoverlanding2015]

Yup same thing I would do lol, I know for a fact I would fumble and drop the screws haha

[@dennisr7452]

Those shift knobs look great. Thanks for showing how to install them, makes it a lot easier for anyone who wants to install them. The Anvil color looks great.

[@DIRTROADCRED]

Thanks for watching!

[@timreynolds2935]

Another great video. I love the products you find. Keep it up, it's fun to customize

[@SeaMonkey137]

When I had my manual Rubicon I installed a set of Holley B&M shifters that were really similar to these and I loved them. Totally transformed the look and feel of the Jeep. But I really like the customization you get with these American Brother shifters. Nice job on the install video, too!

[@DIRTROADCRED]

Great to hear!

[@michaelashores4073]

Love it! I have been wanting to do this for a while, but haven’t checked it off my list. Hopefully I will get to soon. Thanks for the video.

[@DIRTROADCRED]

You should!

[@GT_KREW]

They look wonderful, definitely ordering some later today.

[@DIRTROADCRED]

Awesome!

[@alexzaro9798]

great looking shift knob

[@cdshmn]

I'm so glad you got them from ABD-great guys and products!

[@craigkim5995]

Dammit, I had no idea I needed this :). Looks incredible!

[@DIRTROADCRED]

lol!

[@leerfarmer]

Thanks for sharing more toy's for our toy's‼️

[@Carlos.A.M.]

Another great mod vid! Thanks fellas! p.s. Matt...nice tan! You got some color! I'm jealous!😊

[@DIRTROADCRED]

lol thanks man!

[@rodlowell7448]

Love the video, and had no idea this product existed. I would recommend putting a towel in the console so if you did happen to drop a screw it wasn't gone forever.

[@DIRTROADCRED]

Good idea!

[@hdcrazy1456]

Awesome vid! Looks great

[@DIRTROADCRED]

Thanks!

[@teedeerolo]

I really love all of these!! so cool. not sure if mine would as good since I am black on black..... thanks guys!!

[@robertbelongia6887]

Interesting, I’m on the fence. Enjoyed the video and the three different colors.

[@johncarro5755]

That is absolutely badd ass!!!

[@danielwest5967]

8:34 “So I can’t pull your knob off while you’re driving…” 😂 Well then what’s the point! 😂

[@DIRTROADCRED]

Lol

[@Verb130]

Nice product. Love the mall crawler mod. When is your next working-mans affordable performance product?

[@DIRTROADCRED]

Got some more budget mods coming,

[@WreckedBrewery]

Those look so cool!!

[@DIRTROADCRED]

Thanks!

[@franciscocruz6726]

That is so cool.

[@user-zp2ms8cv5r]

Oh that's sick on both of your jeeps 🚙 I definitely been looking for this on my 2016 Oscar Mike thanks

[@DIRTROADCRED]

Any time!

[@chipparmley]

Very cool

[@dianacarolinamonrroy8496]

Is there any hood latch locking system you recommend??

[@adamwagner4567]

i looked at those but went with b and m shift knobs

[@RezidentZombie]

I looked on the website and didnt see where you could purchase the raidio trims. I found the gear shifter but not the trims

[@primaljackal]

Distinction Applied has left the chat. 😂

[@DIRTROADCRED]

lol nah. They don’t make shift knobs

[@dksgarage6061]

Great for any Jeep that don't take their Tops off. I can't imagine how scorching hot those get in the sun!! I guess the design on top will leave a pretty cool brand on your palm though.

[@-Wolfgang]

Just curious. Is there an OEM replacement for the window switches. Mine are peeling off the switch.

[@jlautomotive6349]

What an incredible video and now I need to save even more money to buy more Jeep parts… lol. As always you guys do an amazing job, keep up the incredible work!!👍

[@DIRTROADCRED]

Thanks again!

[@Billrovid]

I saw that. wacken off the shifter lol!

[@masterchef2408]

392 Stroker 😂

[@DIRTROADCRED]

lol 😅

[@ajlanger5]

Hello, Wife got a 2024 Wrangler 4xe recently. We live in MIDWEST and worry about undercarriage rusting. What is recommended to best protect it? We've heard of Fluid Film (yearly application), NHOU (yearly application), and Wax/rubber based (one and done?). We'd prefer a "one and done" solution over a yearly one, and we plan to wash it regularly. TIA.

[@stratdx]

For $165, they should drive to my house and install it.

[@DIRTROADCRED]

Made in the USA, billet aluminum , custom paint, custom logo, mopar licensing, etc. it’s not cheap.

[@stratdx]

@@DIRTROADCRED sorry for the negativity. I was just being a wise guy. a wise guy lol. All that being said, I love your channel.

[@ArtbyPatrickPetruccello]

These look really nice. I do like the stock ones though especially since I have a silver/black/rubi red jeep.

[@DIRTROADCRED]

Thanks!

[@SR-sg7qk]

Maybe a suggestion to place a plastic grocery bag around the knob till all screws are set in place.

[@GaryGill786]

Could please make a video on … which jeep colour need more care when someone planning to buy new like red , hella yella, anvil , white , black … which colour shows more scratches on it … or need care to handle it please

[@DIRTROADCRED]

Good idea!

[@Gunmetalbluejeeptjs]

🔥🔥🔥🔥🔥

[@johnshirbini5801]

Looks ok if you are looking for a change but I prefer the stock one for functionality. I really don't remember what was the last time I notice how they look :). Kind of money maker here that's it

[@DIRTROADCRED]

Fair enough!

[@Swanny.]

One thing to note. Those set screws WILL come lose. Not might, but absolutely will. It's not a defect or poor design, it's just the nature of those setups. The cure is to put just a touch of low strength Loctite (do not use high strength or you may never get them off). Just a dab on each screw and no worries. I have a similar setup from someone else and love it. Love it even better after I did the Loctite. Going to be ordering a set of these for the wife to color match her 4xe

[@DIRTROADCRED]

Good tip, we appreciate it!

[@tobynoe6748]

The hard part is getting the old knob off. 😂😂

[@rwilliamjacob]

Brotherrrrr

[@michaelscott7116]

i went to ABD website to order these 2 knobs and can find neither. All they have available for 2024 wrangler is a "Jeep JL 4x4 Shifter knob". No indication if it is for transfer case or auto/manual transmission. Dissappointing because i'll gladly drop the $300+ to get both knobs but doesn't appear either are available and the website lacks a little to be desired.

[@MrDennymac40]

I like the way it looks but that push to shift looks like a good way to bump it into neutral at the wrong time by mistake.

[@vegasxventures]

But the OEM doesn’t need the button pushed to go from drive to neutral either

[@DIRTROADCRED]

Oem works the same way

[@DawnPennington-wp2hz]

Nice Mod but Im worried about the pressing up and down.

[@tonymunoz7400]

10:24 👀👀🤪

[@williamdomey7584]

Looks like a great mod. They unfortunately don’t make them for 2000 Jeep Cherokees

[@GoXplr]

“It’s Ryan’s Jeep so I have more room for error” …. 😂

[@DIRTROADCRED]

😂😂😂

[@GaryGill786]

Wowwwwwww❤❤❤❤❤

[@TwoFeatherChannel]

I like the shift knobs but don't like the sound of the spring action for the automatic transmission shifter popping up and down. plus don't like the exposed black section under the knob. Your Dads color match looks the best.

[@DIRTROADCRED]

Thanks for the feedback!

[@docfluty]

I had thier parts on my challenger years ago... they were top shelf products. Nice to see they offer jeep stuff as well

[@Everydayjk47]

Do they have it available for a jk?

[@DIRTROADCRED]

Yup!

[@madmac8283]

Maybe I missed it but it would be very helpful if you would have a text description of the video including a hot link to the company you are pitching and your discount code.

[@DIRTROADCRED]

It’s the first link in the description?

[@madmac8283]

@@DIRTROADCRED Doh! I failed to click on ...more Thank you.

[@ArtbyPatrickPetruccello]

I would have had to tape a bag around the shifter..I drop screws all the time

[@DIRTROADCRED]

Lol

[@efrainsalasjr.6583]

Eh.. looks ok I guess. I'm not digging the push to shift. I'll be keeping mine OEM, but thanks for the video.

[@DIRTROADCRED]

Thanks for the comment, definitely not for everyone

[@TwistedOff]

👍

[@joewyatt2269]

Sorry but the push down to activate the shifter seems a little janky to me.

[@DIRTROADCRED]

All good. Definitely not for everyone

[@LukeEdward]

Thanks for showing us your shift balls, guys! Nice color. Nice size. How do they feel in your hands after using them for a while?

[@DIRTROADCRED]

Perfectly cradled in the hand

[@jonasgolden3277]

why does website say not available for 2024?

[@DIRTROADCRED]

Probably not updated yet, works fine as you can see

[@jonasgolden3277]

@@DIRTROADCRED looking to add to my 24 Anvil Rubicon

[@bryangaribay4574]

why did jeep put a cloth dash in the 2024 jeeps, when your wheeling and go through some mud or dirty water and it gets on your dash it's going to stain and your never going to be able to keep it clean, just wondering

[@brianr5145]

*you’re

[@fastfed]

No way im paying money to get rid of my real leather knob for a cheap plastic / metal one!!

[@mariodelrosario9578]

Great product, but isn't cheap. Over 300 for the 2 knobs

[@DIRTROADCRED]

Made in the USA, billet aluminum, custom paint, mopar licensed logo, etc

[@ArtbyPatrickPetruccello]

I think I would have had the Jeep at an angle so it looks like it is going up a mountain

[@DIRTROADCRED]

Good idea!

[@MrBoomStick]

For my 6 speed manual, not being flat on top would be better. Fine for auto’s, but…

[@phillipcraggs6202]

I'd like these in bare aluminum, no etching, just clear coat. I sent them a message... we will see.

[@mmmii702]

It’s NE-VADA not NE-VAHDAH

[@DIRTROADCRED]

lol my bad

[@UtahNick71]

Thats a really expensive shifter. I just want mine to be matte black on top to prevent the glare moments.

[@DIRTROADCRED]

Made in the USA, billet aluminum , custom paint, custom logo, mopar licensing, etc. it’s not cheap, but it is quality

[@JasonWendling]

Matt - time for Katzkins. I just did my second 392 to replace the maroon seats.

[@DIRTROADCRED]

Good call!

[@talktomn]

In this inflationary market, I wonder how many people are spending money on cosmetic mods vs functional/performance ones. Or any mod at all. The product is nice and looks well made, but that’s not where I’m spending my money.

[@DIRTROADCRED]

I like it due to the made in the USA fact and that it gives a cool touch to the interior

[@jonathanmasters6041]

Lmao - yall know if you just had a manual shifter would be a world of easier...bahahah....but guess it's about the community for auto.s...plus we'll no one wanting to drive manual anymore 😂😊❤

[@DIRTROADCRED]

lol if they had the 392 in manual I would do it, and Ryan was going to get his in manual but it would have taken 6-8 months

[@teon39]

Totally worthless mod for $150 I don’t see anything wrong with the factory knobs in my opinion. In this shit Biden economy I would buy groceries before jeep shit.

[@steveludwig4200]

Looks silly.....