A Major Malfunction with WM’s Brand New Mack

Disclaimer: This video is for entertainment purposes only. NEVER UNDER ANY CIRCUMSTANCES SHOULD MY VIDEOS BE USED AGAINST DRIVERS.
TO THE PEOPLE AT WM THIS VIDEO IS FOR ENTERTAINMENT PURPOSES ONLY. DO NOT USE MY VIDEO AGAINST THE DRIVER AT ANY POINT.
Well, here we have what I think to be a once in a lifetime opportunity. Back in April or May, I was out filming 106292 in the morning and everything was normal. Later on in the afternoon around 4pm, I was wondering why he was so late. I ended up finding him right as it started to rain. According to the driver, a sensor had broken around 10am and was causing the truck not to grip all the way. It wasn’t a problem until it started raining because the bins had become slippery. And seen in the video is the result. The driver could have gone back to get a spare but chose to keep the truck seeing that he only had about 200 stops left.
Also, this is my 1k sub special. I want to thank everyone who subscribed to my channel. Everyone no matter when you subscribed I truly thank you for supporting my channel. Back in 2017 I never thought that I would be to this point and actually have 1k subs but when COVID happened everything blew up on my channel. I truly mean it thanks for subscribing to my channel and look forward to may more videos to come.

[@noelryan7943]

That driver did a good job of riding it out and finishing his route That looked tough Nice job

[@TruckMaster642]

Yes he fought through it

[@wasteprofloridarefuse8508]

If I was the driver I would say screw it I'm getting a new truck byee

[@trainlover123trainsrock]

@@TruckMaster642 This truck gets a seal of approval for the most amount of fails on a route. XD

[@HardeepSanghera-vl3dy]

I inn in my

[@aaronkoeppe9057]

Not even! Did a horrible job

[@kiiyabell8533]

I would have cried and took that truck back to shop for an exchange lol

[@andrewthetrashkid1435]

Awesome video! This is probably the most entertaining garbage video I have ever seen. I’ve never seen a truck screw up that bad before. I bet the driver had a long day. It was really cool to watch all the bins go flying. Awesome video, and congrats on 1000 subscribers, keep up the awesome videos!

[@TruckMaster642]

Andrew The Trash Kid Thanks, I’m glad you enjoyed the video

[@friendlyneighborhoodcow8776]

My algorithm finally recommended something good

[@TruckMaster642]

Great. Glad it’s already going through the algorithm. This was a the most interesting video I’ve ever filmed

[@Joshuasfunandgames3136]

Same here.

[@kenj4296]

good on him for carrying on, I know for a fact days like that are frustrating

[@wasteprofloridarefuse8508]

11:50 that is skills right there 😂😂

[@TruckMaster642]

I rewatch this video every so often. Makes me laugh every single time

[@wasteprofloridarefuse8508]

@@TruckMaster642 yea and it's funny to when the truck threw the can when it was coming down

[@wasteprofloridarefuse8508]

@@TruckMaster642 and the thumbnail when I saw it I was like I know this is going to be good

[@Joshuasfunandgames3136]

The can did a backflip lol.

[@Joshuasfunandgames3136]

@@TruckMaster642 Sharing this with my friend he is going to be laughing so hard when he sees it.

[@briangammage5351]

THE BEST VIDEO I HAVE EVER SEEN!!!! 5:20 AND 13:19 IS THE HIGHLIGHT OF PASSIVE AGGRESSION!!!!! I KNOW HE WAS P-O'ED FROM THE CANS FALLING IN!!! THANK YOU FOR MAKING ME HURT LAUGHING!!!!!!

[@SirX27]

The ASL's are problematic due to the many moving parts and it sucks when their not working properly, I had two brand new ASL's one was an 2017 Mack/Heil with the rapid rail arm, other was an 2020 Mack/EZ Pack also with the rapid rail arm both arms gave problems. But I'm glad this one was repaired.

[@chrismaze3441]

I was a cnc machine operator at dana/hyco for 11 yrs we built cylinders for garbage beds heil, ez pak, leech lot of other dump druck beds crysteel, heil tishamingo in MS heil garbage beds are made in ft payne alabama

[@ryanhimenes6709]

Our mechanics at wm In nor cal, had our arms and grabbers tuned perfectly. Same arm as this truck . He's trying to grab the smaller cans near the top so it's slightly wider because the grabbers won't close all the way , won't squeeze right . That's a horrible way to work ,look at all the down time cleaning up and pulling cans out of the hopper ? When you climb in there , or even climb up on the truck AT ALL , you have to tag out lock out . Every time .

[@chrisbrown6945]

And thats why i dont work for WM anymore 15 years with them. Now if you even breathe wrong they will shit can you

[@lts5674]

This guy is a menace! Idk why the poor trash cans continue to subject themselves to such treatment! I blame the recycle bins!

[@ecotechippy4014]

What a caring & professional company, taking over the industry like this is easy if we dont do our jobs at all

[@goofyguy2]

I can immediately see the problem,The claw doesn't have rubber grips on it,It's WM and the automizers where they leave the claws with out rubber grips.

[@TruckMaster642]

No the problem was that one of the sensors broke the truck was brand new. The sensor wasn’t allowing the claw to grip the bins.

[@goofyguy2]

@@TruckMaster642 So after a certain point of closing the claw just stops after that point?

[@crollwtide9452]

It seems that the rain and the can design are both exposing a major weakness in this type of trash collection strategy.

[@josephbennett3482]

Nope, the rain doesn't have anything to do with bins being dropped it's due to the claw not gripping the bins at the right strength

[@parkergray5346]

The claw is broken, that is why there are so many issues.

[@TrashBulldogProductions]

We all heard of butterfingers but now get ready for buttergrippers! Seriously though this rig needs to hit the shop ASAP because retrieving a hoppered cart at almost every stop gets old fast.

[@TruckMaster642]

Yes. For sure. The griper sensor broke which was the problem

[@pandaman9171]

5:25 😂😂 Hitting the bush got me

[@fasterpastor4383]

I have ran one for 20 years and haven’t dropped that many in the hopper in The whole 20 years. He also doesn’t have the rubber on his forks that keep it from slipping.

[@TruckMaster642]

The problem was a sensor broke

[@sidwellsk8er]

I've had plenty of days like this. Lately actually I've had a week like this.

[@TruckMaster642]

Wow that must suck

[@sidwellsk8er]

@@TruckMaster642 I recently took my old truck back after it's been a spare for two months or more. It's a Heil half pack odyssey automated front loader. The internal sensor in the front fork cylinder has gone bad. Once the hydraulics warm up the sensor fails and the Curotto bucket won't dump or undump properly. I have to turn off the auto dump feature and run it like a regular front loader. It wasn't designed to be ran like that so it's very problematic. I had a brand new Heil Python but we are extremely understaffed from Covid19 right now so all yardwaste trucks won't be running until probably fall and we have to pick up the yardwaste as we pick up the trash. In the Python that wasn't the easiest thing to do so I gave that truck back and took my old Curotto Can truck back. The guy who's been driving it gladly gave it back because he doesn't have the skillset to run that truck when the sensor fails nor did he know why it wasn't working so he takes the truck back in and gets another truck every day. I'll make it work until a new cylinder with a good internal sensor comes in.

[@mach1james]

Same well almost

[@walterkersting6238]

It looks like something you’d see on family guy.

[@Joshuasfunandgames3136]

Like it really does. They should make an episode about this

[@davidhead5943]

Is he getting in the truck and bringing out the trash cans that he is dropping in ? Funny video !

[@Kevnadian]

Somethings wrong with the grabber for sure. They're supposed to tighten up as the bin lifts. Poor guy.

[@WastemanagementofOregon]

18:24

[@deadnedz]

I’ve worked a truck like that… unfortunately some of them are real lemons no matter how new they are. Ends up being pretty expensive replacing all those carts.

[@daniellewilson7374]

Did he get the bins out?

[@TruckMaster642]

Yes. After doing the lock out tag out method

[@rblx_rptrooperdaniel7649]

Are city purs on things by the wheel too catch it

[@FormerWMDriver]

Looks like the gripper is out of adjustment. Someone will need to take a few minutes to troubleshoot and correct. It's definitely not suppose to do that.

[@TruckMaster642]

Yes. The driver showed me what broke it was a sensor that had snapped around 10am. Sucks that he had to deal with it and hoper all of these carts. Luckily they took it back to Mack and it was fixed and inspected in under 3 days

[@wasteprofloridarefuse8508]

@@TruckMaster642 mack sabotaged them

[@RiggyRonnie]

It does what it’s made for! It throws the trash away, I’d even say it does more than what it’s supposed to.

[@youhavetodealwithproblems7323]

God bless the person who helped them

[@cable30]

Wonder if the cans that get left in and not left get reportd or they get new cans to replace any that dont stay in arm any.

[@TruckMaster642]

I can confirm they were all taken out

[@minnesotarefusetrucks1505]

Nice video my main dude, entertaining to see a wm truck keep hoppering and the claws throwing carts out of grip, that sucks that’s censor went wrong, would be cool to see a python do this haha, did those people around the beginning say anything to you? Just wish they didn’t buy sterlings might as well buy icons since there much better or even ottos

[@TruckMaster642]

No the people at the beginning were cool and I wish the bought rehrigs instead of cascades. These ones keep breaking.

[@minnesotarefusetrucks1505]

Truck Master642 yeah I bet even universals or nb or even egs would work maybe even nv or what ever there called would work

[@mitchellwhite5175]

Looks like arm mid height limit switch is out of adjustment. Keeping a finger on the gripper close button helps if that happens

[@TruckMaster642]

That’s a great idea and it actually worked towards the end of the route when the driver thought of that.

[@FresnoRefuseTrucks]

Really unfortunately that my guy had a really bad day. Hopering cans here and there and sometimes flinging them in the air. What is shocking is to see it's new yet has these fails. Nothing against wm it's just, Why? Shout out to you for trying to help the guy out. I laughed hard seeing the carts fling out or bring hoppered and im sure the driver did too just that he had it worst. They should have put the helper hand on the route to help out.

[@TruckMaster642]

So What happened was one of the sensors on the arm broke and he told me that all day it was fine but it was in combination with the rain that made the carts fall in. To be honest I don’t know why it broke and am sure that it’s not the drivers fault.

[@Amrep335]

it's the truck

[@FresnoRefuseTrucks]

@@Amrep335 We know. I read the descriptions.

[@sidwellsk8er]

Stuff breaks, picking up trash is hard on equipment and no matter how much money you spend on equipment, how well they build it and how hard you focus on not breaking it it will always break.

[@craigmcbeth1584]

What was wrong with the truck??

[@TruckMaster642]

A sensor snapped

[@MendocinoRefuseTrucks]

This is past a malfunction, this truck gives the word malfunction a bad name

[@TruckMaster642]

Agreed

[@goofyguy2]

It's more of Waste Management Leaving some trucks without grips on the sidewinders mostly.

[@MendocinoRefuseTrucks]

FloofyBirb These are automizers but yes most likely

[@goofyguy2]

@@MendocinoRefuseTrucks Oh,Sorry. My DPW truck is a sidewinder XTR,So as soon as I see that arm I get it confused.

[@MendocinoRefuseTrucks]

FloofyBirb Lol i used to be the same way, always got Sidewinders and automizers confused

[@citrusheightstrashtrucks]

Some of republics older rapid rails over here will slowly ungrip the bin once it is over the hopper for some reason as well

[@WasteManagement828]

nice video the house at 3:40 is that the house that put sawl dust in thier recycle bin

[@TruckMaster642]

Yes it is

[@WasteManagement828]

oh sawl dust is not recyable

[@socksmeow8828]

Ahh yes, 20 minutes of our content! Lol

[@trashmanthomas9033]

He should’ve called the supervisor or mechanic to look at the problem so he’s not behind on route. Or send another truck like a python to do the route

[@TruckMaster642]

He called a few people to help him and non of them finished. I think even with this truck problem he might have finished before them.

[@trashmanthomas9033]

Truck Master642 oh ok

[@landbouwengameNL]

HE ALWAYS TAKES THOSE BINS WRONG, HAS TO PACK THEM MUCH LOWER THROUGH THEY FALL INTO THE CAR. GREETINGS FROM THE NETHERLANDS

[@scottp4063]

What does it say on the side of the box?

[@HighDesertRefuse]

just add a red circle over that cart, and this thumbnail will be perfect.

[@TruckMaster642]

Lol that’s a great idea

[@Local_Gamer_kid]

@@TruckMaster642 why do the bins keep faling in

[@tlaw_sanitation]

@@Local_Gamer_kid read desc

[@zp12684]

Usually WM isn't allowed to retrieve hopper carts but I think if he followed that policy the whole route would need a rollout haha

[@TruckMaster642]

At this yard they are allowed to get carts out of the hopper

[@bukolaotubu4957]

You should go to the machine to do adjustments with the grabber

[@bukolaotubu4957]

I love garbage truck especially when is a Mac and the grabber cool and there’s a side loader

[@hamtrak_p42dcamtrak67]

WHAT IS YOUR MAJOR MALFINCTION!!??? Also great video

[@TruckMaster642]

Hamtrak_p42dc Amtrak the malfunction is the grip

[@hamtrak_p42dcamtrak67]

Truck Master642 I know I just wanted to say tat

[@hamtrak_p42dcamtrak67]

Truck Master642 I still can’t see why they could not send out a replacement truck

[@Joshuasfunandgames3136]

@@hamtrak_p42dcamtrak67 the driver just didn't want a replacement he only had an hour left. So they didn't send one.

[@hamtrak_p42dcamtrak67]

@@Joshuasfunandgames3136 cool

[@cwcspyninja2249]

1:55 why you putting trash in recycling

[@kanyongamerrecycling3913]

He put it under there because the original can he had the trash and was too small and it was gonna fall in either way so he put it in the recycle bin so the driver could have a better grip on it rather than the small can just hopper

[@shenacooks]

Did he get the bins back out or was it a loss and the had to be replaced?

[@TruckMaster642]

Yes he got them back

[@michaelkashani9086]

what happened to the bins that were tossed into the truck?

[@TruckMaster642]

They were pulled out

[@kiiyabell8533]

The driver climbs up and pulls them out

[@TruckzNTrainz]

Operator. Take it easy on them brakes lol😂

[@starcodejay]

why does the bins fall in the hopper every time?

[@TruckMaster642]

Sensor issues

[@starcodejay]

@@TruckMaster642 oh ok

[@victorrodriguez3171]

What does that garbage truck has problems because the problem that it has that I’m seeing the clot is like going up when I kind of see the driver put the claw up then just slips through and goes into the garbage truck

[@christianascherin5306]

how do the people get there cans back

[@Wildwood56]

Ok ya pick on the go green B's wm thumbs up

[@raffa7300]

Warum fallen dem ständig die Tonnen rein? Ist es ein neuer Fahrer oder ist der LKW kaputt?

[@johnnyboo127]

Can i ask why the driver didnt down the truck for not operating properly? Whats the point of continuously dumping cans in hopper? I assume the driver had to try and remove them no?

[@TruckMaster642]

Idk probably cuz he ily had an hour of the route left and only 1 out of 5 carts fell . The video is just the fails. Probably quick just to deal with the problem

[@jonathanshowalter6629]

Just so were clear, we (MACK) only build the truck and frame, then ship to a "BODY SHOP" the customer chooses to have that company install Dump,Flatbed,Roll-off,Tri-axle,crane,cement pump w/e they need.

[@TruckMaster642]

Yea I got that but sounds better saying new Mack than Labries. Definitely not a Mack problem here

[@daragirlstar]

why do the bins fall down allot

[@TruckMaster642]

Truck was broken

[@daffyduck6969]

Why are the cans all turned sideways

[@armandolule6946]

Driver + new way system problem? We have a brand new new way and so far hasn’t giving us that problem. Maybe it’s made for big carts?

[@TruckMaster642]

This was actually just a simple sensor problem. Crazy how such a little thing can cause such a huge problem

[@judithjoya4776]

Why in this video ars throwing away the trash cans??

[@TruckMaster642]

It is a fails video. The arm was messed up.

[@judithjoya4776]

Messed up?

[@tlaw_sanitation]

What was wrong with your rubbermaid?

[@oepaga12]

Dude that thing is the Rankor of garbage trucks! 🤣😂🤣. I think it ate like 30 whole cans!

[@TruckMaster642]

Yea it was funny to watch but a real pain for the driver

[@TheAustralianGarbologist]

Bruh I felt so bad for the driver, legend for helping him out though! Just dropped you a sub! Hopefully you get to 4k soon!!

[@EchoVids2u]

They really need either a new type of trashcan that is easy to grip or a better claw.

[@O-dawg]

I think this was happening because the driver was grabbing the top of the bins so when he dumped it the can slipped and then the grabbers grip was to big causing the bin to fall into hopper. I also think the rain had something to do with the grip. You can also see that the grabbers had a good grip on the can when he grabbed the middle part of the can.

[@TruckMaster642]

Well from what the driver told me a gripper sensor broke causing it not to close all the way but the rain definitely didn't help

[@O-dawg]

@@TruckMaster642 oh, that makes sense maybe that is why he was grabbing the cans on the top half of the bin. Oh also I forgot to say that this was a great video and was really funny!

[@jesusaronquillo9292]

That is for sure

[@jamesm7486]

I could be wrong but looks like one of the operators are grabbing the tote extremely high and the hydraulic claw is not securing it properly.

[@Garbofan]

What state was this filmed in?

[@chicagorc3967]

i think a few people who are missing cans now know where they went lol

[@TruckMaster642]

lol

[@christophernicholson20]

5:29 lol 🤣🤣🤣🤣🤣💀💀💀💀

[@lydiacolcombe4565]

what happend to 102997?

[@TruckMaster642]

It’s still around, just a spare.

[@garbagetrucksofsanmarcosca]

Amazing nice video dude.

[@TruckMaster642]

Thanks

[@andyng3666]

It is obvious that the bucket grip is quite loose & not working properly. The rubbis truck should be sent to the service centre to have the bucket grip system repaired, adjusted and inspected thoroughly for any faulty or loose parts before the rubbish truck can be used again.

[@TruckMaster642]

Yea. It was fixed the next week when the truck was taken out of service

[@krojas7607]

They need to redesign the claws on them trash cans or make the trash can bigger

[@javisantiago1585]

was this go pro footage or no

[@TruckMaster642]

Yes GoPro forage

[@javisantiago1585]

@@TruckMaster642 ok

[@TheThreeMusketeers91214]

Is there green waste???

[@TruckMaster642]

This is trash

[@TheThreeMusketeers91214]

Yes the vid is but is there green waste for WM??

[@TheThreeMusketeers91214]

Truck Master642 please reply

[@kanyongamerrecycling3913]

@@TheThreeMusketeers91214 it’s just a normal delivery waste management what’s my name trucks doesn’t depend if it’s recycling or trash there still for the livery You can still put rash or any leads on the garbage

[@TheThreeMusketeers91214]

@@kanyongamerrecycling3913 Alr thanks!

[@newmexicorefuseentertainme9406]

Man that truck is a complete piece of junk it’s sad that these newer units are not how they used to be very entertaining though glad you were able to film this

[@TruckMaster642]

Thanks for the comment. For reference this was all over one small sensor that caused all of these problems. They send the truck back to Mack and it’s fixed now

[@newmexicorefuseentertainme9406]

Goes to show how these new Mack trucks are absolutely junk

[@Trashman702]

@@newmexicorefuseentertainme9406 it has nothing to do with Mack. It’s a NW Sidewinder body with a bad gripper set up

[@WillieMeetsWorld]

Aint no way, I would have called dispatch so fast. I’m coming back and I need a new truck or an immediate adjustment to the arms.

[@michaelbialoski643]

Are those malfunction on the New Mack or is he just bad at gripping the can

[@TruckMaster642]

The sensor on the arm for the gripper broke

[@SouthwestRefuseVehiclesIreland]

5:29 SLAM DUNKIN CANS

[@TruckMaster642]

Yes that one was very funny to watch

[@gamermula]

Ahahahahahahahhahahahahaajahahha

[@gamermula]

Bro that garage truck driver is like me when I play with my toys

[@hunterklowss]

"Cristinan Hernandez Joya" commented this exact same thing 2 months earlier than you.

[@SouthwestRefuseVehiclesIreland]

@@hunterklowss what

[@cwcspyninja2249]

Today the garbage truck came to my house it was Pratt Trucking like always sometimes other companies do it

[@TruckMaster642]

Nice

[@cwcspyninja2249]

Truck Master642 yup I love them as a garbage company

[@CatNaps33]

The malfunction is between the front seat and the steering wheel.

[@fuchs7112]

Not really

[@everybuddy5924]

@@fuchs7112 actually it was, the driver apparently was not paying attention to what was happening.

[@Truckmaster5347]

why did i see carts falling in the truck

[@TruckMaster642]

The truck had a sensor issue

[@donlown1879]

I don't think its the truck or the driver. Those look like cheap as* containers. Mine are heavy duty and would never squeeze like that.

[@CoppersInKiltZZ]

i would say its not just the truck but partly fault of the driver gripping the can right at the top seems very odd

[@TruckMaster642]

He did that because the claw wouldn’t grip and it gave him more time to pull the bin down before the bin fell in.

[@ddanjoint1611]

Ya he obviously had more of a chance of holding the toter up.where it is wider which actually made sense. Kudos to WM driver for doing what he can with what he had to work with.

[@krojas7607]

I see the problem the claw is not coming down low enough to pick up the trash can in the middle it's gravity at the top and that's what it keeps throwing them in the trash can all the trash truck or throwing it on the ground

[@resjr330]

Why would you continue to deal with that all day? Take the truck in, or have the service truck come change the proximity sensor if you know that’s the problem.

[@TruckMaster642]

Honestly i don’t know. It was only the last hour and about 1in 4 carts fell in so it wasn’t as bad a the video makes it look

[@judithjoya4776]

61 FAILS?!?!!! 🤯🤯🤯🤯

[@zoelim2709]

💩💩💩💩😢

[@BikeHub1234]

How much bins did the garbage truck eat? JUST HOW-THAT TRUCK MUST HAVE MORE BINS TNEN RUBBISH

[@refusetrucksofCT]

Enjoyed this and why did he have this broken truck

[@TruckMaster642]

I broke during the day an I caught him while it was broken

[@refusetrucksofCT]

Truck Master642 oh btw I watched this like 20 times lol love the fails.

[@census3370]

Needs bigger bins for that claw.

[@boblamb8421]

Garbage truck mechanic for 31 years. Rookies at their best. Cannot say I've seen it all.

[@TruckMaster642]

Actually it was a sensor that broke but we could use a few more mechanics

[@boblamb8421]

@@TruckMaster642 Here in Mesa Az concerning the fleet of city owned Curb tender's it was either broken wires or a limit switch malfunction mostly due to dust and dirt contamination that sends a false signal. People have no clue how seemingly simple things can affect the operation of automated side loader circuitry..

[@LEU_WM_266]

Waste Management’s most careless yard

[@ppi_god_619]

Is he taking the trash cans out of the truck or just saying fuck it

[@judithjoya4776]

WHERE ARE THE SENSORS?

[@extremegamer103]

Did he take the bin out of truck when he drops them in by mistake

[@kanyongamerrecycling3913]

Sensor broke

[@aundreaspaulk72]

idk if the truck is having a bad day or what

[@TruckMaster642]

A sensor broke

[@lisafesta5675]

what is he doing different that the bins are falling in so much

[@pyrofan317finn2]

61 Fails Nice Viedeo

[@TruckMaster642]

Thanks

[@gamermula]

Why he holding it on the top?

[@gamermula]

That was dumb

[@kanyongamerrecycling3913]

@@gamermulaso the can would not fall in Bec the cans were slipping

[@raffa7300]

Ist's the silliest driver ever! Hahahaaa

[@minibinwaredisposaldude5641]

Imagine what happened at 5:26 happened at 2:52 and the Cart hit them

[@fremontgarbagetrucks]

Ooohhh 😂🤣

[@TruckMaster642]

I can only imagine

[@minibinwaredisposaldude5641]

Truck Master642 yup

[@mariefoy242]

How would they know who's garbage can to replace once it's been crushed

[@TruckMaster642]

We’ll the blade wasn’t working so he was able to climb up and get them all. It does take time with the lock out tag out Rules tho

[@DJFVLOGS]

13:04

[@jordanbass9167]

Are these truck auto dumpers?

[@TruckMaster642]

no there not. this had a sensor issues that caused all the fails

[@christopherlovelock9104]

Wouldn't it have been cheaper and easier for the driver to ring the depot and get them to either send a mechanic out to fix it, or bring another cart and swap them. Surely they must have 1 at least sitting in the yard spare, especially with this Covid thing going on at the moment that cart is eating bins nearly faster than they can produce them.

[@TruckMaster642]

Well. The driver decided to just finish up the route only had an hour left and by the time he got a spare it would have taken longer. Also for the carts they were all retrieved, it just took a while

[@christopherlovelock9104]

@@TruckMaster642 Ah I see, (should've read all your top bit). So with the bins it was a case of - here's your bin back, it's a different shape, - (new style "crusher tested"), - doesn't have any wheels, and no lid, - other than that you should be able to get a bag or two in. I liked the lorry at the beginning - now that's what we in the UK call - 'A Truck' - very nice indeed, operators name suited it as well. Was the 'bar device' for some form of full length sheeting the load, or for lifting things on and off. Oh yes I forgot to say you have a 'new subscriber' as well.