A MUST HAVE For The Jeep 4.0 Exhaust Manifold!

In today's video show we replace our exhaust manifold and bolts on our Jeep Cherokee 4.0L with stage 8 locking fasteners and we run into a big issue….
jeep xj 4.0L exhaust manifold replacement
• Jeep XJ 4.0L Exhaust M...
Jeep 4.0 locking fasteners
www.stage8.com...
Devos Outdoors Website with 10% off discount code "2AOVERLAND"
www.devosoutdo...
2A_Overland Patreon Page: / 2a_overland
#JeepExhaustManifold #Jeep4.0L #JeepXJManifold
Thanks for watching and if you enjoyed the video please like and subscribe for more of our future adventures!
Follow our #Instagram for more awesome content!
/ 2a_overland
Affiliate Links Are Provided In The Description Of This Video

[@PHARSiD3]

I wish I knew what these fasteners were. When I bought a replacement motor for my XJ, it had these fasteners on there as well. I wasn't to sure about it so I took them off 🤦‍♂️. Know I wish I kept them on there.

[@2AOverland]

Oh noooo 😭 I’m sorry about that!

[@mnvjim7900]

Any time I have a stud break off like that, I always weld a nut on first. I never have good luck with extractors. They always break off and then you are screwed

[@2AOverland]

I was going to attempt that if the stud wasn’t so far recessed in the block but I should of tried anyways. I knew the second that extractor broke I was in trouble 😅

[@mnvjim7900]

@@2AOverland I know it seems sketchy but I’ve build up the middle with multiple spot welds and sometimes it works out. I hate when I break an extractor off.

[@citizen4power]

Great time to wrap your fuel line also,it gets a lot of heat right under the header.

[@2AOverland]

Yep! I couldn’t agree more 😊👌🏼

[@RollinMyOwn]

Same problem for the dodge 4.7l except the dodge 4.7l will break all the bolts offer back them out. I learned that the hard way....

[@2AOverland]

Oh no 😭

[@campoutwestus]

Those look pretty sweet. Maybe I'll install some the next time my exhaust manifold cracks. 🙄

[@2AOverland]

It’s not if, it’s when it cracks 😅 might as well when you’re in there

[@kjohns236]

Thanks for the video! I wonder why that stud broke off.

[@2AOverland]

No problem thank you so much for watching! My guess is the stud broke from me torquing it too tight on the original install or maybe some bolts loosened and the manifold put stress on that stud and broke it 😬

[@offgridrecon]

👏🏻👏🏻👏🏻

[@2AOverland]

Thanks for watching brother ☺️

[@offgridrecon]

@@2AOverland always! You got good videos!!! 👍🏻

[@2AOverland]

@offgridrecon means a lot to me thank you 😊

[@davidjayroe828]

Drill that bolt out and retap the hole, you don't need a new motor 😂

[@2AOverland]

Shhhhhh 🤫 the wife’s already convinced. I wanna build a stroker for this thing lol

[@davidjayroe828]

Oh yeah, sorry 🤫🤣 ​@@2AOverland

[@davidjayroe828]

​@2AOverland thanks for the video, changing my manifold gaskets next week 🤘🇺🇸