A Players Guide To Eating Worlds

[@pixeils]

Something I forgot to add: If your trench is a bit bigger because of using tnt to make it, then you should flood the bottom of the 15 wide trenches so the floor does not get blown up by downaccelerated tnt from the tnt generators when it gets pushed down or else you wont have a smooth floor.

[@caseygraingergolf]

I see this after my trenches lol

[@BadGamer305]

@@caseygraingergolf what does he mean by that

[@BadGamer305]

@@caseygraingergolf please help I just started Rinnen the water and now idk what to do

[@harryhelina9859]

@@BadGamer305 wait its you from redstonia's skele farm video

[@BadGamer305]

@@harryhelina9859 ye lol xd

[@HelgaRakel]

I love this video. Really well made and goes over so much in such a short time.

[@ehsannd8537]

hey man i wonder can we use leave blocks instead of pumpkin cuz both are good scaffolding and can be broken by piston

[@eshwar6969]

@@ehsannd8537no

[@mikol9832]

Hey pixeils! I found this guide really useful for making my first perimetre, and i wanted to thank you for making slimestone more accessible to technical players who want to learn it. I'd absolutely love if you'd make more guides likes this one (this video was so smooth) about quarries, wall makers, building large flying machines to simulate airships or things like that...

[@robot4jarvis836]

"or you can use friend if you have one"

[@CrazyCaleo]

that hit hard

[@helpimahugedisaster5728]

I just wanted to build farms, why they must hurt me this way

[@verykittypretty]

too real

[@pennyblush98]

cried myself a river 😭

[@TheTrashman147]

Such a high quality video for such a complicated contraption, especially for the size of your channel

[@sensei2657]

Well edited and informative video, really nice work!

[@mappawappa9798]

Fancy seeing u here

[@sensei2657]

@@mappawappa9798 ?

[@mappawappa9798]

@@sensei2657 I like watching ur vids and I randomly see u here

[@mr-pr0cesss]

Man the informations that you give and also the time laps (if I can call it a time laps) is just perfect. Well done! :-)

[@Tapitus-totalus]

Finally found Dom77's world eater design. Appreciate the video and all the proper credits 👍👍

[@Katzastrophe]

just a quick note: im running the 530 by 530 worldeater rn. if u clear out a mangrove swamp, your sweepers definitely crash into waterlogged mangrove roots because their blast resistant. be sure to remove them beforehand or start the sweepers manually again if they run into such blocks. cheers and good luck with your peri

[@bondgaming1667]

i was 3 minutes away from launching my WE for the first time and then read this. life saver!

[@poppinlochnesshopster3249]

@@bondgaming1667 Would have cost you basically no time. The sweeper crashes into the leaves, you remove them, you relaunch the sweeper. No different than removing the leaves beforehand except for the few seconds it takes to relaunch the sweeper. "Life saver" is a bit much.

[@Gabriel-zd8iy]

Amazing video! Underrated channel for sure

[@Zachary3DPrints]

Until, this day I have never heard of a world eater... I just noticed, you deserve way more subscribers!

[@pixel0x]

Ayy very nicely made vid \o/ Keep it up man

[@KiwiRedstone]

3:42 [If you have one...] That's gonna hurt someone.

[@pixeils]

;)

[@yuhu3265]

This is the most helpful video here to me. Schematics and everything! ❤

[@romanzwetzich8150]

How did u get the schematics?

[@TerraVoxel]

It’s finished \o/

[@harryrambo4564]

Really nice video. Definitely the one I'll be linking to people asking for we help :)

[@05廖子淮]

I dont have anything else to say but thank you, this is a very useful guide!

[@LivingWildLive]

I love the camera movements in this, great production

[@scratinhd7975]

Absolutely satisfactory, nice work!

[@kele5783]

My favourite WE by far, great job!!!

[@visionofthesun]

This works great! Easy to fix even if you think you have destroyed it!

[@ncolyer]

wow now i just wanna make a hole

[@Annoyance1969]

great, now i have something to use the starlight mod for

[@Gazzhy]

yeah, I have to install it or else my game will just freeze (I mean it's loading but really slow)

[@20LeeBrian1]

Additional tips: if you pause the game, then the chunks will progressively be updated. - you do not need to use pumpkin or concrete for building the world eater. But pumpkin is useful for helping place blocks without using too many temporary blocks - there are BUDs (block update detector) without observers. Be wary! - orientation does not matter, but the trench sizes do matter. - you can add redstone blocks at the side to stop the machine, not just the main side you are using. - (very important) I strongly recommend to test this in creative before using in your main survival world! This still works on 1.19.2. However, render distance and simulation distance is strictly important, as improperly configuring these can easily break the machine and destroy itself.

[@brwnin69]

where I place the schematic? at the floor? does I need to flat it?

[@20LeeBrian1]

Your yellow concrete marks the center of the world eater. You can place it as long as the center chunk is properly outlined. You also need to dig the trenches (5 block and 17 block) and check if the 5x(size of world eater) and 17x(size of world eater) is cleared so that the world eater does not break. If there is rain, put lightning rods on top of world eater so that it does not trigger TNT for safety reasons.

[@lkdn]

What render and simulation distances are required or is this something to be determined from testing?

[@2Dcubecle]

@@lkdndepends on the size of your machine. the entire thing (all dupers and sweepers) needs to be loaded when running, so if doing a 17x17 chunk area, render distance of at least 18chunks assuming youre doing it alone. having friends can help keep other parts loaded so you can check for breaks, obsidian etc

[@ralf7823]

This was a great vid. And those litematica downloads really helped. Thanks alot :)

[@andreademeco4050]

This video is a masterpiece. Amazing. Thanks!

[@NitFlickwick]

This guide is fantastic. Made the process very clear, all the way up to the smooth floor. Could not have had the result I did without it. Thank you!

[@dariusstarrett8837]

Very high quality video, thanks!

[@manu_faktur]

Fantastic video, thank you very much for creating and sharing this!

[@MTBiSLiVE]

Something to add here, if you're using carpet bots riding the minecarts as chunkloaders, you should set their gamemode to creative or regularly heal them, otherwise they will suffocate after a couple of runs and everything will break

[@BadGamer305]

How can they die?

[@keenban]

​@@BadGamer305phantoms

[@albert9248]

Thank you! This is such a well made video!

[@Karachay_Oramany]

this world eater can work on spigot, you need to change a setting called: "max-tnt-per-tick" default is 100 ( i think). but don't set it too high.

[@stefanocastioni3261]

can you make a guide about making a nether perimeter? In particular some tips for the trenches

[@pixeils]

Perhaps in the future when I’m not as busy.

[@yvanmezencev4669]

This video is a banger I just finished my very first perimeter in 1.19.2 following this guide and everything worked flawlessly!

[@memeball6226]

Amazing video

[@henryhausschwein880]

Awesome video! Thanks a lot!

[@Unpug]

This video is so good, you told me everything I needed to know!

[@SakuraRyokoMusic]

Hey! I see your comment about trying to run it on a Paper based server. I've tried to do this myself (Pufferfish+) and ran into issues obviously before I've seen this video. Can you quickly tell people why in your own words? Personally, I believe I have found out myself the hard way; but found some "work-arounds" that basically render the World Eater into a NON-AFK machine only capable of eating a layer one at a time without it's "regular" run cycle; at best. I ran into serious latency issues and the TNT drop height seems to be wrong, so I had to lower the TNT dupers down about 6 blocks; and even run them independently from the sweepers so they don't get blown up by the "glitched"/laggy TNT dropping. Seriously, the TNT explosions were still happening 5 minutes after the TNT dupers dock; and the sweepers were problematic with Pufferfish's aggressive chunk unloading mechanic; literary ripping sweepers in half.

[@L1min4l]

links dont work anymore

[@1neshade402]

use water logged stairs on the side of water trenches so that after removing water , tnt can only break underneath not the stairs and let the side water to come in

[@juandddee]

great job pixels, i love this video! gg

[@hanselbarrera]

thanks so much bro for the video

[@animal-cm2iy]

hey great video, btw seems like that the schematic for 530 13+ version is not completed, there are some blocks missing at the starting point on a tnt side, i havent tested the rest tho

[@pixeils]

Yea I changed the schematic link to the wrong file, it should be fixed :) lmk if there are any issues.

[@animal-cm2iy]

@@pixeils yeah, thanks

[@1neshade402]

really much helpful

[@emlincharly]

Loved this!

[@guillermocuadra]

This is awesome, I wanted a custom shape but I guess that's impossible with just one machine.

[@Meddysbox]

Vitamin C has an world eater for irregular shapes on bilibili. Apparently has some issues with snow. Failing that, you could try a self-returning 3-way duper. This won't have the liquid sweepers at the base.

[@guillermocuadra]

@@Meddysbox Thanks for the reply but I guess if you build a 3-way at Y: 80 you won't reach bedrock because I guess it doesn't go down

[@Meddysbox]

​@@guillermocuadra You would rebuild the 3-way lower. This would also apply for the trencher when clearing space for a world eater.

[@pvpzulu8247]

Is there a reason why sweepers keep blowing up in the 520 version

[@zipoffs6814]

Hi pixeils, i've run the machine and am nearly finished. not looking for a smooth floor but how do you best launch the TNT bombers and retain the self lowering system to eliminate the blocks in between the bedrock blocks at the very bottom of the map? Thanks

[@pixeils]

once the sweepers have done all the layers above bedrock you just need to disconnect the slime tower and u can start pulling the top section down with a sticky piston. So pull it it down once so tnt dupees launch then after they are out of the way a second time so it is in position for when they return . repeat as much as needed to clear blocks

[@zipoffs6814]

@@pixeils this worked and completed the perimeter perfectly! thank you

[@stormyzz4432]

on the 272 eater the when everything gets to the other side it completely breaks. only two of the tnt dupers start going back to the original side along with all of the swipers. Rest of the dupers just stay there.

[@stormyzz4432]

Found my issue. It turns out I am a colossal idiot. On the top part there are some pistons that are pointing upwards, which is essentially what pulls the tnt dupers down was not extended when I started the machine. So the return didn't work correctly.

[@Necromanszer]

For anyone planning on building this in an ocean, you NEED to remove all the kelp in the perimeter or the entire thing will not work. Spent a few days to figure this out :’)

[@NickAndriadze]

I love to use and run world eaters, you need to eat the chunk of the world the eaters are supposed to eat to begin with, by *manually* digging the trench... Or use the Docm77 certified method of making a small world eater to eat the trench and then make a big world eater to eat the rest of the world.

[@poppinlochnesshopster3249]

The schematic for the 530 block world eater is off. It's only about 500 blocks between the launcher and return station, remember to adjust accordingly if you want an actual square. Not sure why it is off.

[@pixeils]

I never checked after reupdating the links that it was the correct schematic, are you sure the outline isnt 530 blocks wide just the middle section is 500 blocks wide because there is the two 15 block trenches?

[@poppinlochnesshopster3249]

@@pixeils Not sure it's been 3 months since I used it, all I know is I measured the place that got exploded by it after pasting it into a creative world and it was 530x500~, had to add on the 30 manually to get a square for survival, no big deal.

[@zingyburger]

Do you have a schematic of the 3 wide tnt duper?

[@zierdo4821]

hey pixeils! why is there multiple minecarts for the tnt dupers in the schematic for the 272 wide world eater

[@pixeils]

my bad it’s an artifact of me repasting it in creative, in survival just place only 1 minecart

[@eliroepke4691]

Super helpful! Any chance you could include a world download? I can't get litematica working on my PC. :(

[@mikol9832]

I think the 15 wide water remover provided doesn't quite work. One of the sweepers get stuck when reaching the closest station

[@pixeils]

iirc might just need to be push limit behind the flying machine bit because some blocks were removed to make it 7 wide for that module instead of 8 so it’s probably pushing through the wall i’m assuming. essentially just place a bit more sand behind it and it should be fine

[@rajwantsandhu9309]

I know you probably aren't gonna see this but in 1.18 do I just make the trenchs bigger so I have more space to build the next one?

[@insider9665]

I believe it auto lowers its self but not sure

[@dumspring8964]

Hello,I am going to make a spawn chunk perimeter, and my spawn chunk is surrounded by ocean.So do I need to build an anvil wall on both 4 side?Also, can this sweeper due with kelp?Thanks for answering and this great video!

[@pixeils]

you don’t need an anvil wall just adding water walls is fine. it won’t break if the sweeper stops from kelp but it can happen so you would need to relaunch it

[@dumspring8964]

@@pixeils Thanks for answering,also , I use a 16 wide smooth wall trench maker.So I need to flood all 16wide to make a smooth floor right?

[@justnoam6061]

If snow fell while I was building it should I remove the snow that generated on parts that aren't exposed when I finished?

[@pixeils]

nah as long as you have built everything in the schematic it’s fine

[@justnoam6061]

@@pixeils neat thank you so much great video btw

[@Tovarris]

I tried this, but for some reason the tnt isn't duping. Everything else works fine and I've tested it on optifine 1.19.2, 1.19.4, and fabric 1.20 with no tnt falling on any version. I also tested it without any datapacks or resource packs. *Edit* - I accidentally had built the 1.12 version. After replacing the tnt dupers for the newer ones it worked just fine.

[@TheOk98]

In what version did it work just fine? 1.20?

[@Tovarris]

@@TheOk98 It worked well in 1.20 after I fixed it.

[@TheOk98]

@@TovarrisGreat, thank you! :)

[@RedmarKerkhof]

I built this on singleplayer and it launches 4 TNT before it loses the TNT block and whizzes right past the return station. I have no idea what I'm doing wrong. I built it exactly according to the schematic. Even if I cheat and paste in the completed schematic at the same spot in my survival world, it shows the same problem. It doesn't do that in creative. What is it about my world that breaks the machine? I'm at a complete loss here. Otherwise, a very clear and useful video Pixeils, well done. EDIT: figured it out! It was a dynamic light datapack I was running. It interfered with the blockstates.

[@dj_enby]

you da best. also super cute skin! ^.^

[@person1082]

for the final layer if you run the tnt dupers twice after the sweepers clear liquids on the second to last layer, you only need to pull up 2 block every 6 blocks not every block in 1.14+ on servers 528 is technically render distance 15 not 16 also if making trenches that go through water, is there a way to use tnt easily because if nothing is done after draining it the walls will get blown up again

[@pixeils]

i mean i used to do that, but i like this better because it wont miss anyblocks and you can prebuild it while its running so its a lil faster. When using tnt in water just use a water wall, 1:35 will prevent pain when u have water trench. about the render distance thing, its possible that they changed it but it seems unlikely ill have to investigate that.

[@anand_bhasme]

How did you make background of video that white and bright??

[@FunDaOne]

is there a tutorial for a toggalable tnt machine without the sweepers? id rather sponge gradually instead of mine 40 chunks worth of blocks through deepslate just for a water remover ngl (im doing the 272 wide design)

[@poppinlochnesshopster3249]

No idea where you got that you needed to tunnel anything. There are builds for all trenchers listed.

[@Katzastrophe]

Where do I stand when I run it? And how much render distance do I need to have to not break it?

[@piai55]

render distance depends entirely on the size of the world eater. If you want to eat a 16x16 chunk area for example, you'd have to load AT LEAST the 16x16 chunks the world eater travels in.

[@Meddysbox]

If you were trying to make a perimeter around the End portal, how would that work with this world eater?

[@pixeils]

>The sweeper will crash into the end portal, this means the sweeper will stop and by extension the worldeater will stop. >You remove the sweeper when it crashes and build it 5 blocks forward right after the end portal. >You do this for 3 layers until you get past the endportal then it runs as normal. >If the end portal is lit i would cover the top with obsidian so there isnt 100 tnt in the end .

[@harryrambo4564]

i wouldnt use a world eater, as theres nothing to sweep, just use a 3d duper or an array of dupers

[@TherenMC]

Ive gotten far in making this in hopes of making a creeper farm, but I just realized it is in a deep dark biome. Does anyone know of a data pack that allows mobs to spawn in deep dark?

[@KhojeMammad]

how can I launch it for the second time? it wont do anything when I break the redstone block for the second time

[@markoronimark6014]

what about it does not work on a paper server?

[@schoolz7181]

Where is the 272x272 version? I can't find it in the google drive folder.

[@PeruUrdanpi]

one quiestion, if I make the world eater a bit smaller how can i do to the tnt and sweapers to return. when they go for the fist time they didnt return because they dont detect that they are all

[@Butterfliesarequiet]

I made the trencher with the schematic and it won't launch when I press the button? what am I doing wrong, I have double checked it with the litematic hologram and it is exact its the 272 trencher

[@temfarrus0129]

i just made the 272x272 wide world eater but whenever the machine goes for a second way back to the start it just gets stuck and ive made a few backups and all are the same. anyone got a fix_ thank you.

[@UnderMit3]

How do i expand the schematic

[@miractaspinar8608]

Idk if anybody will see this but i wanted to use this design and i used the 530x530 design and shortened it to 500x500 and it kept on breaking. Ive rebuild it like 6 or 7 times now and it doesnt work.I use carpet bots to load the chunks but it keeps on breaking at the last sweeper every time and when its not breaking the last sweeper just disappears. Any fixes or help?

[@derpapottamus]

does this work on minecraft nintendo switch edition?

[@pixeils]

No. Bedrock edition used different mechanics. Also pre sure your switch would blow up if it did, or at the very least sound like a jet engine.

[@Konrad10Hagen]

Great video

[@x_tornado10]

Hey the schematic links sadly no longer work. Could you renew the links?

[@pixeils]

I fixed the ones on this video, hopefully they are the right schematics lol

[@x_tornado10]

@@pixeils Thanks

[@luiseduardoorozcoenriquez2745]

Nope :( first two links are not working@@pixeils

[@x_tornado10]

​@@pixeilsThe links expired again. You could maybe upload them to dropbox or google drive or mediafirenso the links don't expire. Discord links expire after 24 hours

[@pixeils]

@@x_tornado10 I forgot to reply, I switched it to google drive now, didn't realise discord changed how their links work :)

[@danieldevisdiestro4562]

Why does the world eater need the 3 size trench

[@Oso_2221]

Anyone know why if I use a world eater in a server and the server is working at 7 mspt if any player connect to the server the server crash??

[@antoniop2732]

Lets say someone whants to do a 350x350 perimeter whit this what would i have to do to make it work for that size?

[@Ashimo]

Algorithm push, thanks for the design.

[@matcy_]

Nice vid ! Update description for 1.20 ?

[@luchros3693]

thanks but what height should i place the world eater above te ground

[@KamilGugel]

When I am playing on Realms can I split the world eater to 3 pieces ? So I'll have more than 10 fps. Basically building 3 smaller world eaters

[@pixeils]

i mean yes you could but realms have really bad performance in general so it would still probably lag on serverside still.

[@KamilGugel]

@@pixeils i will do it anyway, its not my first rodeo on realms xd

[@hannahp642]

is the 16x16 area in the middle of the world eater for chunk alignment? it fits perfectly in one chunk so that's what I assume. That aside, this is a very well-edited video and an excellent guide.

[@pixeils]

yes it’s for chunk alignment

[@hannahp642]

@@pixeils thanks!

[@hannahp642]

@@pixeils thanks!!!!

[@drummerboii121]

hey quick issue, the tnt dupers on the 530 wide world eater are different from the testing machine, and the 530 dupers dont work, is there a reason why?

[@Cuhvayhe]

Built it twice on my server and it didn’t seem to work… in the part when you start it by breaking the red stone block and put it back, it’s automatic from there correct? Or do I need to always break and replace red stone block

[@MasterElements]

As someone who is really new to world eaters I feel like there is a whole half a video missing of information I should know. I don't even know the right questions to ask but I don't feel confident building a world eater as there isn't enough information here.

[@maosolny5856]

something weir happend. after i paste shematic into world (to try it is still working) flying tnt dupers dont stop at returning station, they just keep going. any idea why ?

[@maosolny5856]

is shematic wrong ?

[@pixeils]

You probably aren’t loading all the chunks so the tnt on the tnt generators is falling off making the flying machine no longer at push limit 12 so it flys through the return station

[@maosolny5856]

@@pixeils no, i spawn bots and its still breaking. Whan i found that tnt is dropping only once and its not dupepd so theres no tnt. When i use mini wold eater from your download evrything is working fine

[@maosolny5856]

the problem is when activator rail got moved down the tnt is updated and gets activated. no duping here

[@maosolny5856]

@@pixeils and how much bots will be enough to load whole terrain? one bot in each corner will be fine ?

[@zorntex_8043]

Can you make a guide about other slimestone machines?

[@pixeils]

anything in particular?

[@harryrambo4564]

@@pixeils The process for using a 3way bedrock breaker wouild be interesting for a lot of people, and ways u can clear the overhead maybe. I know from experience that its easy to make mistakes when doing it for the first time

[@Martine1337]

Any ideas of why litematia ISNT showing any signs of building when I put it into my world? Though, if I use the "Paste Schematic in World" function, it shows up perfectly?

[@crosyz306]

u are probably in render layer mode. Press M click on Configuration and select All or move the layers up. for building i would sugest All Below mode u can assign Hotkeys to move the layers up and down its much better to build like that. hope thats solves ur Problem

[@Martine1337]

@@crosyz306 I did look into it when I had the issue, for some odd reason Litematica decided to turn off rendering completely. But I did figure out the solution, thanks regardless! :)

[@KY-oi9hf]

hi, i just need to align the middle square with the middle chunk right?

[@KY-oi9hf]

the schematic

[@pixeils]

yea

[@maddy3094]

Can you provide the litematica for 272 block wide 1.12 world eater?

[@truecrunch4541]

Hey having problems with the tnt not duping on my server. I have enable allow piston dupe and max tnt per tick to 500. still not working. Everything else works fine. Idk if I need to add a coral duper for the tnt or build a different design. Built in 1.20.4

[@nikothecat1650]

are you on paper?

[@tobiasholstfuglsbjerg207]

the pumpkins in the schematic seem kinda weird to me are they supposed to be placed for the machine to function?

[@pixeils]

The pumpkins are just scaffolding they are not required they are just in a location where they will be automatically removed. Could also use melons or leaves of other blocks if you want to manually remove them.

[@Jakob-ct5nm]

How do you align the world eater schematic with the trenches? edit: nvm figured it out myself, i hadn't looked at the schematic yet

[@jaypagare]

{or u can use a friend if you have one} ohhh that hurts

[@Chrystalaria]

Can i replace the slimeblocks to honeyblocks???