A Pro Tip That I Didn't Listen To

Some free advice....
Like and Follow On The Tone
/ onthetonerctt
Music by…
And So It Begins - Artificial Music #rccar #rcracing #rcvlog

[@rcracing5066]

Hey Mark, if you don't mind me asking, what camera and audio gear are you using in your workshop? Thanks.

[@SmoovD]

Make a “how to get into club racing” video!! Different classes and tips👍🏼

[@robthemouthmillan301]

Hey Mark why don’t you raise 1/10 scale buggy and come out here to Tacoma and see if you can hang with us because you know as well as I do my nine-year-old can drive a four-wheel-drive I just think it’s a little harder but I love your videos bro you’re doing an awesome job keep it up and God bless

[@RcOffroad9513]

My esc is only 6v and 3amps, what's a good external bec? Because, I want to run my servo @ 7.4v? Thanks

[@MarkSantaMaria]

I used to run a castle BEC. I didnt like it because its one more possible point of failure.

[@kennethjeffries5022]

Its fine my old Hobbywing is only at 6v and I run a high voltage servo with a glitch buster on my.

[@kylewilliamson6228]

For someone that’s wanting to start racing what would you recommend for an electric 4wd buggy? I have been looking at the arma and team associated.

[@philthyco1]

Good info bro..Servo savers get on my nerves!! lol

[@huckaberryfpv4986]

Had 2 sub..you throwing out some good tips bro:)

[@MarkSantaMaria]

Thanks for the sub! Glad you liked it!

[@TurnII]

Can you tell me what parts mat you have there on your right with the hex drivers.....

[@MX304]

That servo saver delete piece will break before the servo. In fact, after breaking two in pretty short order, I swapped back to using the servo saver.

[@MarkSantaMaria]

thats what i was hoping, that it would break before the servo. So you run the servo saver turned all the way in?

[@MX304]

@@MarkSantaMaria I crank it all the way down and back it off 1/2 turn. Just enough give to not hurt parts but tight enough it centers up and doesn't feel weird.

[@seanhatch4425]

Protek servos are great servos. I run them in my nt48.3 as well 150t steering and 150s throttle

[@MarkSantaMaria]

That is the exact same setup that i run in my nitro buggy.

[@anythingbrap8843]

i run a protea 170s servo in my trx4 and even rock crawling its amazing

[@kennethjeffries5022]

I been running a Savox high torque/high voltage servo for a while still running although doesn't center the best had to use a decent amount of sub trim and steering trim lol.

[@brucebartlett1950]

Running protek 100t throttle 130t sterr. Great so far in my losi truggy was thinking of racing at indy but I need more practice do not want to be a rolling speed dump.

[@HL-OOI]

My spring is dead after many jumps when I only back off like half a turn on my MT..wish that plastic piece that screw onto the servo is coming from the tray itself for steadier servo mounting...😁..after some removing and installing the servo, that piece 2 screw holes striped..

[@arthurfisher7198]

i dream to have a room that looks like yours one day

[@wydopen701]

FYI Protek speed and torque servos are identical aside from gearing. Neither is more robust than the other

[@braddahdussifyoumuss596]

Do you crawl too?

[@noahnegrete6051]

Get a MKS 599 servo, those are the best.

[@extrazero1593]

but why sell/buy a new car every season? also, would tekno give 50% off your next kit if you send them your car from last season? parts exchange... =)

[@LawrenceTimme]

If you've had it in 3 buggies you have saved your self loads Vs buying a new set every time!

[@Getnhoes]

So I'm reallly wanting to get into building tekno kits but I really dont understand hearing motors and gears. Any advice. Ps. We dont have a race league here. Sure wish we did

[@MarkSantaMaria]

i would love to help. What do you mean hearing motors and gears? Nitro engines or gear mesh?

[@Getnhoes]

@@MarkSantaMaria gear mesh. Servo motor the whole electronics. Building the kit wint be too big a deal. Pretty mechanically inclined. Picking the right electronics ,spur an pinion combos scare the heck out of me

[@crashescrashes9267]

@@Getnhoes gear an mesh on a race buggy depend largely on track motor and batrery selection

[@Getnhoes]

I want to get alot of takeoff speed and top end speed. Probably be running on dirt. I'm gonna attempt to get a racing league started here in branson Missouri

[@crashescrashes9267]

@@Getnhoes there are a ton of tracks to race in the midewset.... Smac track in st louis... There is no ideal gearing for all tracks and conditions what kind of car are you running on road or off road what motor brushless or brushed what is the c rating of your battery if i go to a new track i take all my pinions and spurs

[@t2nate137]

Put on a shirt dude. I can’t see it.

[@MarkSantaMaria]

haha... i love that shirt

[@t2nate137]

What shirt!?

[@xd_gangster693]

well i cant afford to buy new electronics every few months so i just run my stuff till its dead

[@danielwalter5268]

I’ve never seen someone change a servo so fast!! Amazing. 😂

[@rcdudes3475]

You need new music