A Shop Full Of Projects...

[@michaeltablet8577]

If you look up excellence in the dictionary there is a picture of Chad's Fab! This channel is beyond Awesome!

[@rickhay9782]

Your garage has the most beautiful view across the street...the mountains are simply awesome! Your parental job raising those boys could not have turned out better ❤

[@KarelRode]

This comment is "approved".

[@terrybrunson8055]

Timp

[@gardenparty3288]

"Can't get upset for the result you didn't get for the work you didn't do" Amen brother.

[@terrygardner3031]

Jaren won the worst and Kehin won the best. welds. I love the way you are building your Cherokee. You don't have to always have the best to have a good vehicle for what you use it for.

[@wycliffeb]

It's clear from watching this video that Chad had all the knowledge but passed it onto the boys. They continue to learn everyday. Brilliant to watch such a great family.

[@donlarsen9807]

Chad's family! The boys projects are coming along nicely. It's a great comfort knowing that there are families that can work and learn together with a little bit of ribbing thrown in and taken with a smile. Keep up the great work and entertainment.

[@user-ne2tb1vs9m]

The family that wrenches together stays together. Great seeing all these projects happening at the same time.

[@jester-gq9jq]

They both won the welding competition. They did the best they could and they learn from their mistakes it can only get better. Success will never come unless you try

[@stephaniewilley2224]

Chad, you're a good instructor. That's why your sons are doing quality work

[@floydstowe]

Kenner gaining confidence both welds looked awesome.Great bunch of Family and Friends

[@TheMr9fingers]

Love how the boys are all in the shop using learned skills or learning new ones the best will be when he can say yeah this is my truck and I built it with my Dad

[@eck8240]

Your whole family is infested just completely contaminated with love and creation you lucky man❤ heaven on Earth does exist❤❤

[@skyepilotte11]

Dad Chad, you're the man ! Teaching all the youngsters hard work and equity is rewarding. Great job.

[@garychaiken808]

Do you also feed Jared?😂😂. If so than you could write him off on your taxes. 😂😂. Good job guys. Thank you. 😊

[@marvincarter870]

The sky outside the garage is beautiful! I like the fact that people are learning to weld, form metal, and figure out problems with little supervision.

[@kenc1800]

“Multiple mistakes”. …… “well I have five kids!” The chemistry of teamwork, know-how and “learn-by-doing” of Chad’s Fab crew is priceless!

[@steven.h0629]

❤ Corbin will be running the whole show one day 👍😎✊

[@barrywallace9522]

That thing is going to be so sweet!

[@mrfunnylookinhayes9088]

I love, love, love the shot of those mountains.

[@edwinschlee8374]

Looks like everybody has a project going. Even Korban washing Kaden's blazer and building a chair!

[@waterislife.9204]

Great fun boy's. When you build something with your own bare hands it makes you value it more & have respect for the knowledge that's been taught to you by the wise. It's going to be an Epic beast. 🙏🍦🥧🥛

[@markburke2533]

Finally enough jobs to keep all of the boys active. Looks like each is doing a good job. Nice projects!

[@robinredman5192]

Kenner is like a sponge. He has some great Mentors. You can see him watching, listening and taking all the wisdom in from everyone and assimilating it to use later. You can see the light bulbs going off when someone explains something that he may be unsure of. And the things he has learned from y'all has been internalized and done quite well on his own. Proud Papa and Mama I bet. John here, from the back-roads of Northeastern Tennessee.

[@kenc1800]

But Kenner is also getting “information OVERLOAD glare also”. I love the family teamwork all hands on deck attitude! Chad’s crew are awesome and learning by doing.

[@archieloy172]

Great show, Chad. I watched it on my TV, getting your boys doing there on project later on in life they will sit around and have great memories. I no this because my father and I did what you and your boys are doing I. 60 now my father father passed years ago but my memories are strong and to this day speaking of him makes me smile laugh and sometimes even speak how mad he make me when he cought me trying to cut corners lmao but be cause of him I became i mechanical engineer and lived a very successful life to we're my wife didn't have to work she raised our 3 daughters and yes they all can fix and repair anything they put there minds to all because my dad put the time in with his son great job dad Chad

[@Serena-g2y]

2:29 this shot could easily represent Chad and all the little voices in his head. 😂

[@HarryS8311]

Aha, most definitely lol

[@chadsfab]

I might have more voices than that......🤯😁

[@HarryS8311]

@@chadsfab lol 🤣🤣

[@jamesboris1233]

Kaden, you have a nice ride

[@noonehere1793]

I so enjoy watching all of you work together as a coheisive family unit, it reminds me of my early years in Downey (up north) at my grand parents house…..and it makes me want to move there to end my days!👍👍 the competition was easy they BOTH WON just by being involved!

[@dudleybaggerman9574]

Oooyea 😊 i remember my shop and 6 kids , with stuff happening in all corner's and tools Everywhere ! But i Wouldn't have it any other way ! 2 boy's / men got there Own shops now and my Daughter can wrench pretty darn well herself. U got a nice family seems like too me . Keep up the Chad/ Sons fabing and im allways looking in the corners for that Toe truck taking shape ! ✌️😊✋

[@timpowell3255]

Chad, you and the Mrs should be really proud of all these boys ! They are amazing kids without a doubt ! Their own projects are coming along just mind blowing ! Thank You Sir for sharing these videos with everyone ! Be safe and bless Y'all ! 🤘❤️🙏

[@Derf1313]

16? Hard to believe, sometimes... As a parent, I congratulate you both, lots long days teaching by example, with skills that cross many fences, & can be meaningful at each. With each.young man. & then all the friends, that choose to be around. Lol, not to mention running a business & YT too. Just to help keep us smiling & entertained... Thanx !

[@jeffwomack5821]

There is a simple answer to everyone saying you should build a 44 or 60. Just tell them this one is yours and you are doing it the way you want. They are welcome to build theirs anyway they want.

[@wadepg]

I have been watching your channel and everyone's who you deal with most (Fab Rats, Matts ORR, Merlin and so -on , and I just wanted to say, your garage is so Family oriented and God driven and I love it! I`m born again and I appreciate good, wholesome entertainment. Thank-you all for doing what you do. For The Kingdom!

[@garymcduffie4151]

On the welding contest.......Corbin, they need help!

[@genegoodman5233]

That was a lot of small pieces put together to make the top of radiator holders. He took his time and it looks great. I worked with guys that were always in a hurry to make an impression. Reworking and remaking do not make an impression, makes waste. He did great.

[@sarahmoore3831]

Great video, love the family working together. Mom you are really great.❤

[@jester-gq9jq]

I really love the attitude of the whole crew.

[@norcoredneck]

Stacey is like having a hyper active brother who walks around poking his siblings. Adds to the magic of the channel.

[@chadsfab]

You are right about that! She does it even more when the camera is off.

[@richis65]

What fun to have your sons learning how to work on the vehicles, tools and fabrication skills.

[@psg6314]

My uncle had 49 Chevy panel wagon that sold to a friend who restored it after it had been sitting in our horse paster for 40 years he won best in show at a car show in Atlanta motor speedway great video keep up the good work God bless from GA and stay safe

[@jeffbeard395]

Thank you for sharing your family time in the shop with us. Watching you guys work through the challenges of the build us great

[@sparky951]

What awesome editing. Flowed from one project to the next keeping me raptured. Keep loving one another.

[@chadsfab]

Awesome! Thank you!

[@stevearnold100]

That is a BEAUTIFUL view from your front yard!

[@jeffreyjohnston6843]

mom made a really good call on putting more support under the vehicle. You guys sure have a lot of nice equipment I would like to have but, i realize I would never use it and it would end up just decorating the garage .

[@archieloy172]

Just a helpful thought when checking hood clearance, take a piece of aluminum foil, roll it in a loose tube around something, slip it off, lay it on piece, reinstall hood then remove hood check your clearance by measuring the undisturbed foil works like a champ good luck guys it works great

[@stephenpoe2037]

Many Iron's in the Fire ! With much Progress ! Thanks for sharing !

[@dalecronk4377]

Looks great, glad all the family are helping. It’s nice to see your teaching your kids a skill and teaching us viewers at the same time. Thank you all!!!!

[@charlesirby9222]

I think he is doing just fine. It looks like it was originally a support following the curves of the body. You've got some very talented boys there Chad.

[@cletusthajester]

Kehin, you need to gusset the upper arm mounts on the axle as well. Especially on the passenger side, they tend to collapse right where it flares out towards the axle housing.

[@chadsfab]

Agreed, they are pretty flimsy right there.

[@kellykonoske91]

I appreciate how your building your JK. The "other guys" down there in Utah, while I applaud their skills and inginuity, They absolutely blow the rig apart to make it handle the toughest trail out there. That just isnt reallity for most of us. Take care guys. Todd Konoske the retired trucker.

[@stevendufresne9994]

Thanks for the Great Video Chad!!👍👍

[@wiresmith2398]

"Are you supposed to be on fire?" Yes. It's.. post-weld heat treating. Perfectly normal, expected, even!

[@pieterbrink4560]

HOPE THIS GUYS WIFES AND GILFRIENDS SUPPORT THERE PASSION AND NOT BE ANGRY IF THEY SPEND TIME IN THE GARAGE AT LEASE THEY KNOW WHERE THEY ARE....LUV FROM NAMIBIA....

[@johngibson7001]

Always a delight to see a new Chads Fab video to watch! good stuff guys! love my hat and tee-shirt with a pocket lol! god bless!

[@Kentucky921]

I was watching intently at the work that was going on, then from no where I hear “that one eyed idiot” and to be honest, I totally lost it 😂😂😂😂

[@ramsey_texano7]

What a great team you have sir. I enjoy watching your videos. Thank you for sharing.

[@KRAVER_]

Nice fab work for rad mount, looks great !! cant wait to see all the personal finished fab work and then paint !! 😶‍🌫😶‍🌫

[@leroywood5383]

You are all awesome mechanics awesome people love your channel. 👍 👍

[@ordinarypete]

19:13 or I bet it’s pretty fun to work with that view. Wow! I would have to take time outs and just thank God every few hours to be able to work with my family, have fun and see that every day. Lovely’ especially at 30:52 😍

[@leroyll1144]

I like chads idea,it will also support that front clip quite a bit.!!! hope the finish body color is the same as his dads BLAZER.!!I have seen a couple pick ups that color and yellow,makes them pop LEMON YELLOW.!

[@jonathandorr2234]

The youngest bredda, is observant, yet we need to process w/adults,.. the young guy, asked the question, about the radiator, and can now be hipped to the generational material change, and fluid difference, from antique-to-modern cooling systems. The younger, has adoration for his big bros, as they practice, the code shortcuts, in the language, of terminology.🙉 The boy, will have percentage points, of his families knowledge, to sum . He has approval stickers. He has integrity. For me, Chad embodies, 5 disciplines, you can choose the categories, and the development of your sons’ talent, is explosive. Let us hear, 2 or 4 of you , in a home studio, ‘sound softened, vocal mics, in u-tube style,‘ to reason ,about structural visualization, which I learned, as a child, from my big brother. When describing a shape or part, you want to manufacture, all conditions, will teach, you , or direct you , and this internal perception, raises, everyones awareness. 💜

[@hibiki54]

Been welding for over 20 years professionally and as a hobby. You can get away without using gloves if you are welding silicon bronze and solid wire .024 and .030 since you will be using under 18v for short circut. It's when you start using .035 and up and are looking into spray transfer or gasless flux core is when you break out all the PPE. When you get that blue spatter that burns you through your leathers you thank the Lord you decided to wear the heavy gloves and jacket.

[@chadsfab]

Haven't gotten into spray welding yet, my next machine I buy will have that capability.

[@davidgrove1480]

you all are great, appreciate you

[@johnperun232]

Really Appreciate all your content, you explain why you are doing and cost effective Thanx for Sharing your experience and knowledge 👍 Have a Great Day 👍 God Bless America 🇺🇸🙏🇺🇸

[@danmartin3522]

Dad's teaching again Well Done !

[@hubertanderson7044]

The green Jeep is more for looks than rock crawling it does look nice

[@garrydurfey9700]

I would say more than a little proud!! Great stuff Chad.

[@terencegillespie6675]

You’re famous. And you’re good. Admirable. Clean up. Paint the shop so that goodness and nicer looking match. Give home fix ups a big boost. Examples sell. You might be able to get a fix up company to do it for you in trade for some advertising.

[@chadsfab]

I would love to but the shop is always full of cars and I can't afford to shut it down for the two weeks it would take to fully clean and paint it.

[@terencegillespie6675]

Go at it with an 8 ft section and your youngest. I bet he can do an 8 footer every day.

[@duanelawrence78]

Beautiful mountains across the way there so amazing!!✌️🇺🇲

[@petergrimes2466]

Kenner's truck would look badass with a @RobbyLayton paint job on it for sure!!!

[@jeffreyjohnston6843]

I think they like the original look, but I could be wrong.

[@petergrimes2466]

@@jeffreyjohnston6843 rat rood would look nice too but i think Robby could work wonder with that truck

[@jeffreyjohnston6843]

@@petergrimes2466 yea any shop worth its salt could turn that out. very easy lines to work with.

[@chadsfab]

We do most of our paint and body work in house.

[@lchebuhar9212]

Awesome family you are. 💪👍🏼

[@allanmacneil1509]

Best get busy. Matt is rebuilding the Bombie. Everyone knows who'll be wiring it.

[@paengsolo2047]

Everybody's working 👍👍

[@JamesDavis-to1hn]

Great video!

[@paulhall170]

Good to see the continuation of CAD; Cardboard Aided Design LOL!

[@kennethevangelista3039]

Can't compliment enough but u chad and stacy r bless 🙏 finally get to c the Cherokee built

[@chiefvilla3167]

Must be a road crew job. 6 guy standing around 1 with the shovel. Caltrans.🤣😂😁😊😉😉🤔. I'd have to go with the only kid with a mustache and he's a little dark-skinned. And he's outnumbered by all the rest. The kid from another mother.🤙🏾😊. Various very interesting day. But I like to know where's the wrecker.🤔🤷🏽‍♂️ mucho trabajo. Astalavista. Ideals mama it is a one good camera job lady👩🏼📹🎥📽🎬.🙋🏽‍♂️🤟🏽😊😎. Remember watch before you walk.🤔

[@kellykonoske91]

A "Steelers Wheel" reference...I like it!

[@louismartorana5167]

Sure glad someone caught that,.

[@theodoredugranrut8201]

It all looks good from here guys, I don't know about 'rock crawling " not much of that around here.I do know a little about hot rod and street performance. Getting weight like the motor lower will make the truck handle much more stable and predictable. Thanks for letting us have a peek to the builds.again my compliments to the production crew. Central California watching

[@leroyll1144]

now he needs to custom vent the hood of the 53,diverter style(direct the air) into the engine compartment.

[@benblasko3115]

It's the "Little Shop, Little Shop of Projects" :)

[@claytonjohn6473]

Those Jeep frames and drivetrain with the 4 wheel drive would fit maybe a Cutlass body or something along those lines. There was a Grand National I saw with 4 wheel drive using a Bravado front axle. Made into drag cars with 4 wheel drive. Be kinda cool to do that.

[@Kyle-ev4fk]

The welder dressed as the Hamburgler seems like a fun addition to the team.

[@thomaslyon2112]

That is a cool looking truck! I hope you are going to paint it,an not leave it all rusty. 👍🇺🇸

[@chadsfab]

It will get painted.

[@paulshannon4576]

When I was younger than Korbin I was also the “tool boy” because it was easier for me to crawl in and out. It’s how I learned my fractions.

[@davidkane2353]

that 16 year old " I T " kid is is holding his own with his elders - no way i could be as proud of him as YOU 2

[@groomnzoom7860]

I collect mercedes A/C fans to add to my trucks. There is always extra room behind the grill of a pickup, and a giant push fan added to the system makes me feel invincible.

[@TheOldaz1]

Great learning curve for all. Thanks guys.

[@rickardee8539]

Tyson's great! I've forgotten what relation is he?

[@Bumblebee4788]

I think he's Chad's brother

[@chadsfab]

Tyson is Dusty's friend from junior high.

[@michaelholden5131]

Good catch Boss Lady!

[@deshb22]

Coolest house ever. Love all the shop space

[@hubertanderson7044]

Chad you guys are amazing

[@Mitch_Bierma]

Haha two quarters of an inch….. haha I love chads fab.

[@Stephenja]

The old Dodge is coming along nicely.

[@geoffreyfox60]

Poor old Shirl he was taken young❤😂🎉😢😮😅😊

[@gordonmurray3153]

I've seen that FabRats have anchor points on the floor of their shop. Why doesn't the Chad's Fab shop also have similar anchor points? Not much time or expense to install, but imo maybe quite a handy utility to have, when you maybe would like to secure a eg an assymetrical load eg a vehicle relieved of its engine and or transmission, balanced on the vehicle hoist. Just saying 🤓👍

[@chadsfab]

I have some anchor pots on the shelf just never needed them bad enough to install them. I have a few friends with frame racks that I can use whenever I want.

[@wayne1959]

I'm calling the weld off a tie guys.

[@skippyjones4195]

Hey Family Love You Guys Great job 👍❤️✌️🙏🏻💪🏻

[@dougdean3134]

Great work by all

[@Bumblebee4788]

Might want to check on a front diff/steering skid plate like Paul has on his Tow truck for the Cherokee....