A sign that your GPU may be damaged inside and how to fix it

Рет қаралды 19,047

Күн бұрын

For repair, please contact me by following the link in the channel ABOUT page.
Buy me a candy at paypal.me/tonynameless
Tools, schematics, boardview files etc are available here
drive.google.c...

Пікірлер

@15dejo 11 ай бұрын

If anybody deserve 100k that's you bro, for my opinion you deserve milion without any issue 👍👍

@venerandarain3 11 ай бұрын

yeah, he is A GPU's Maniacs ( a.k.a Professor GPU )

@teddp 11 ай бұрын

Tony deserves at least a million subs but I don't think there are that many people technically inclined to like this type of content even around the world.

@u9Nails 11 ай бұрын

Nice fix! No music. The copyright lawyers are going to go broke not suing this channel into oblivion.

@wetering 11 ай бұрын

You should have 100k long time ago. I have seen too many reballing footage, (done a few myself), but it continues to be very satisfying to watch. Greetings from the Netherlands.

@jasonowen2252 11 ай бұрын

I would say your the best GPU repair of all! because you really go out of your way to fix them!!

@danieldroguett2407 11 ай бұрын

You give hope to the poor and those who do not study to learn something new or at least understand a concept. Thank you for sharing your knowledge.

@horusfalcon 11 ай бұрын

Neatly done as usual. Hope you make it to 100k and beyond.

@sodaft 11 ай бұрын

7:09-11:11 love the music.

@yacinebotingo6556 11 ай бұрын

wait there was there music ?

@JamesTK 6 ай бұрын

@@yacinebotingo6556the sweet sound of silence

@Saifbas 8 ай бұрын

You honestly deserve a statue at Nvidia and AMD as well! I am someone who follows you, and I congratulate you on your prowess in fixing the problem. Someone like you is following the problem. He deserves to have millions, not the greedy Alex. And I feel sorry for him.q

@ColdOne234 11 ай бұрын

Love to see hardware being restored rather than thrown in a landfill. Do you make a decent living doing these repairs or is there something else that keeps the lights on?

@dvlx8453 11 ай бұрын

probably yt

@GadgetUK164 11 ай бұрын

Amazing work again! Where are you based - and how much is a repair like this typically?

@rongray8934 11 ай бұрын

Great repair. Learning so much from your channel.

@napoficial7123 11 ай бұрын

Zotac: "live to blame"

@imamanas 11 ай бұрын

poor zotac

@ivicastojadinovic9907 11 ай бұрын

It's good that isn't flame. Pot(ac) - with that potholes after lifting the core and memory with ripped pads

@teddp 11 ай бұрын

If it doesn't try to kill you it's garbage 😂. Also Tony at the reballing part of the video there was no sound at all, you usually put some music, maybe KZbin muted it or something....

@facelessvaper 11 ай бұрын

Was gona send you my GPU as I thought it had lost audio over ARC, but then I realised, you missed out the music & I am using SPDIF optical to soundbar.✌

@toffeeroffles 11 ай бұрын

I like the way Zotac also places a sticker over the area of the hook crack...

@caiovinicius5241 11 ай бұрын

Dude i absolutely love all your videos, keep up the great work. SInce you talk about this in this video, do you think custom fan curves wear the fans faster? I currently have my fans set to 80% on 80c hotspot and 100% on 90c hotspot and always wondered if this was bad. My card is a MSI RX 6750 XT Mech V1 (2x Fans), so it runs pretty hot if i dont do this (105c hotspot default fan curve vs 85c hotspot custom fan curve )

@Bsc8 11 ай бұрын

Hi i have the XFX Merc Black version of that gpu and i confirm it runs hot. For AMD cards the delta between HotSpot and GPU temp should be less than 30 degrees, the ideal delta it's around 20C. Mine few months ago was 23C (90C hotspot and 67C GPU temp) but i replaced thermal paste with NT-H2 and i run the card with little overclock (2787MHz / full vRAM oc and 250w unlocked tdp). I also use custom fan curves + thanks to my good case airflow i can set the fans at max 80%, most of the time they runs at 40-50% speed. BUT i've noticed the temps gets hotter over time i think it's the infamous NT-H2 paste pump-out effect. So i'm tempted to try the new THERMAL GRIZZLY KryoSheet instead of the classic paste, i only have the hotspot that runs hot all the other things like vrms and ram chips are operating at max 50C under full load.

@michaelhemric5228 11 ай бұрын

Thanks for the flux info❤👍🏻

@MeitsMSX 11 ай бұрын

Those cards are expensive, but seeing your videos it seems like all manufacturers make junk. I'll be in the market soon for a new card myself, but I have no clue what brand is the least worst. What's the top 3 of actually OK brands/cards that don't break on you as soon as you look at them? And which brands/models to absolutely avoid?

@fedegr0x 11 ай бұрын

"if is not going to kill you even more garbage" xDDD

@barbarianzg8826 11 ай бұрын

i don't even see the padsi see a master daVinci doin' his magic

@Mandrag0ras 11 ай бұрын

100k is on the way.

@MrDeathknight1 11 ай бұрын

did sound drop while he was reflowing it / reball

@ProfShikari 11 ай бұрын

If I could create another 3k YT channels, I would, you deserve more than 100k subs though :)

@taiiat0 11 ай бұрын

it's always amusing to see such support Frames on a PCB to crack, because you wonder if the Alloy they're using is really just that hard that it snaps rather than has a bit of Ductility, or if People are just allowing their GPU's to bend to an unreasonable degree that we shouldn't expect such thin Metal to be able to handle on its own.

@Alan_Skywalker 11 ай бұрын

I actually recommend Senju or Alpha flux. Less smell, less bubbling, better effect with fewer usage.

@BiOnyx. 11 ай бұрын

As you've seen so many cards with poor design for longevity, would you have a personal recommendation which you noticed holds up better? I understand all brands will have bad eggs, but just one brand that tends to come in less frequently?

@JDD_Tech_MODS 11 ай бұрын

Been rocking 3090 and 4090 Suprim X cards and no problems..

@northwestrepair 11 ай бұрын

I dont keep track of that. It really depends on any given model. Zotac Trinity are bad due to the frame design. Otherwise no different from anything else

@PSXman9 11 ай бұрын

they are all fine as long as you don't treat your stuff like garbage (like almost every GPU in his videos) i owned so far over 50 Graphics Cards and not a single one has failed except of one DOA 1060 half a decade ago.

@AnthonyAccount 11 ай бұрын

I miss the synth wave music

@northwestrepair 11 ай бұрын

Tomorrow

@Moloch_Baal 11 ай бұрын

Why you didnt swap those crap black thermal pads? 😢

@luisd.2109 11 ай бұрын

Those are terrible. I changed mine after 2 month after I bought it because of thermal throttling

@drupiROM 11 ай бұрын

12:30 truer words have not been spoken :))

@Rmm1722 11 ай бұрын

Good work 👍

@Junior_POA 11 ай бұрын

I really love your opinions and acid comments. 😂

@idolsister 11 ай бұрын

Music where?

@adlorin 11 ай бұрын

Missing the synth music for the good parts. :/

@FilipMunk 11 ай бұрын

looks like it was damage in shipping?

@yokailover 11 ай бұрын

just wondering, what does "pex" stand for? I keep hearing you checking "pex reset" but I have no clue to what you are referring.....

@kunka592 11 ай бұрын

PCI Express.

@waynejohnson2419 10 ай бұрын

Imagine if graphics cards are edible. We could actually get some return on our overpriced cards.

@TheMailmanOfSteel 11 ай бұрын

Can you buy the tiny solder balls for "re-balling" cores like that, or do you make them yourself?

@northwestrepair 11 ай бұрын

Buy

@Inphinityproductions 2 ай бұрын

Why no music?

@blunaa943 11 ай бұрын

What is that tool you pick the steaming core up with? It looked like tweezers with a suction cup🥴🤣

@stewiegriffin6503 11 ай бұрын

we will invoice the customer and deem it no fix. it's just not practical. Check our shop, glare light, low melt solder. thank you for watching

@kunka592 11 ай бұрын

Amazing, we did it.

@napoficial7123 11 ай бұрын

🤣🤣🤣🤣🤣

@mashedpotatoes5323 11 ай бұрын

Is that supposed to be northrigefix?

@zetsubou3704 11 ай бұрын

Damn blown mosfet with about 4 traces that need restoration; ABSOLUTELY IMPRACTICAL IT IS A NO FIX ALSO DON'T FORGET THE 100$ REPAIR ATTEMPT FEE

@mashedpotatoes5323 11 ай бұрын

I like northrigefix and obviously he is successful at what he does but some of the things he says are just so wrong and he should know better being who he is lol

@ecuadoriano2 11 ай бұрын

U da real deal

@thisoldminer 11 ай бұрын

@northwestrepair how much do you charge to repair plz? Like for the GPU you just did. 😃

@kpakpatojournal1555 11 ай бұрын

indeed i enjoyed it

@kumbaj1612 11 ай бұрын

good job :)

@waynetaylor2784 11 ай бұрын

Hot air bga rework station?

@GenBumbleBee 11 ай бұрын

i got a 3090 on ebay that came in with shipping damage. the IO plate and PCI was bent in on itself. i messaged the seller and he was willing to do a return and at first i was going to do it. but he did ask if i could test it to make sure it works and witch it did. but i was still going to go though with the return. but later in the night i was that the metal plate like the zotac was bent and i was thinking. if i remove the OI shield the PCB will go straight and it did. so i tested it again and it will worked. so i messaged the seller asking if it was cool if i try and fulling fix it and he said go for it. i toke it apart unment the metal plate put it back together and it still works as of me posting this comment. its now been about a week and im happy that it wasnt damaged inside the PGB.

@GiGaSzS 11 ай бұрын

You make it look too easy, which only praises your experience with reballing. I have tried to reball a BGA nand on USB drive, and it was a hassle. Every detail is important like how much flux to use so it does not move the balls when heating the board, and then even heating with low airvolume so the air does not squish the balls.

@Foxx_69 11 ай бұрын

I am interested how you built that BGA tool you got there? I can see the preheater resembles similar units. Do you have a vid of your tool box

@northwestrepair 11 ай бұрын

I have some videos but not much.

@Foxx_69 11 ай бұрын

I have a 2070 i’d like to try lifting the core on. That looks like something you purpose built for these chips. Love to see a video on it one day!

@m-elokkichawki9694 11 ай бұрын

nice job

@freeisalwaysme 11 ай бұрын

Sigh........I swear you can throw a rock and hit someone with 10lbs of Amazon packing in their home. Its amazing gpus keep coming in like this.

@alexturnbackthearmy1907 11 ай бұрын

All better then garbage packaging. Just ordered ram and it come in huge box filled with packaging...on one side of the box and a stick on the other right against the wall. Thankfully delivery men was a living saint and it was perfect, not even slightly dented.

@rustynail8622 11 ай бұрын

I'm a merchant mariner who travels a lot. This was my GPU which was sent from Oahu to Luzon. Customs in Luzon literally cut the box in half for inspection. The mail service standards we're accustomed to here are radically different in other parts of the world.

@stefensmith9522 8 ай бұрын

Hurt my feelings lol I have been a zotac fan since the gtx 680

@easyhardenduro9847 6 ай бұрын

Did/does zotac out source? I have a zotac 1080ti and it looks alot like my msi z170 motherboard.

@Phys1csMan 11 ай бұрын

6:04 "Nvidia GPU Testing Utility by Joe Biden"

@northwestrepair 11 ай бұрын

Yep !

@racztamas1980 11 ай бұрын

Nice Video.Please give more details about why did you not reball the 3rd ram chip as well, how did you know it was not faulty?

@matthewpokora336 11 ай бұрын

No cool music 😢 great video as always though

@Kiekerr 11 ай бұрын

Now that EVGA is gone, what is the best brand I should get? Asus, MSI? Im avoiding gigabyte and zotac.

@kunka592 11 ай бұрын

Asus, probably.

@ThePopolou 11 ай бұрын

Glue = Jaws?

@aleksandrbmelnikov 11 ай бұрын

Не влезай, убьёт! Not (be) involved, (it) kills. «Danger: Keep out!»

@aliemlek 11 ай бұрын

👌👌👍👍

@slkslk9324 11 ай бұрын

🥳🥳🥳

@goku445 4 ай бұрын

I get the humour but I wouldn't take my health lightly. At least apply the flux with protective rubber (piece of broken gloves comes to mind) instead of the bare fingers.

@neildoherty9428 11 ай бұрын

Hell yer love your stuff

@Kriza666 11 ай бұрын

Northbrige say this repairs don't last ...

@HiHi-eq2tn 11 ай бұрын

where u from

@northwestrepair 11 ай бұрын

soviet union

@JohnChrysostom101 11 ай бұрын

@@northwestrepair LOL

@x-ray8047 11 ай бұрын

@@northwestrepair так и знал 👍 увидел характерный въедливый подход к своему делу и сразу подумал что вы из бывшего СНГ. А если не секрет, откуда конкретно?.. и как давно в штатах?