A10 Thunderbolt print on creality 3D printers.

You've been waiting so long. Finally finished the A-10 'warthog' Thunderbolt II.
STL- fab365.net/items/297
This plane has a slender body and wide and thick wings that are not symmetrical in many ways. So it was very difficult to put a characteristic structure. After much deliberation, I decided to make it a little bigger.
By making it bigger, I have more space, so I made structures that I had never been able to express before.
Canopy opening/closing, engine cover opening/closing, flap movement, etc. In particular, it is speculated that this is the first time in 3D to reproduce the structure of the flap that opens up and down at the same time.
It is recommended to use a brim for the wings. Otherwise, it may fall over during printing.
Created custom supports for several parts. They must be carefully removed with a knife. The side from which the support has been removed must be trimmed evenly to ensure good bonding.
Unlike the real thing, this plane is heavy at the back, so when it's finished, the front is lifted. In order to prevent this, I made a small support bar that is not actually there.
In an airplane, the left and right sides are uniquely used, and the port on the port and the starboard on the starboard are distinguished. So, I wrote down P and S for parts that are likely to be confused on the left and right (eg engine).
1 : 48 Scale
Largest part in printing, size = X 77mm, Y 190mm, Z 154mm, After full assembly size= X 371mm, Y 344mm, Z 96mm

[@user-sg9ql8nk1u]

that actually one of the most detailed model i seen in a while

[@fab365_official]

Thank you very much for your comment! Please enjoy~

[@teenagerinsac]

you seen?? HS GRAD RIGHT?

[@davidalonsoperez2040]

great like all the models you design, I hope you can make the legendary antonov 225

[@lopantolulu]

or T-bone 225 who also succumbed to Supa Hot Fire

[@shane142]

Love the work you do with these videos. But one day it would be nice if you did a video on your personal settings, pit falls, and traps others may have made with Fab365 3d prints that could help others. Supports and types of filaments work best, where and when.

[@frankierzucekjr]

Very cool how it all snaps together. You chose an awesome plane to build too

[@stewartfield1386]

Just bought the STL files, super excited to start printing it. Thanks for the build video!

[@fab365_official]

Thank you so much! I just released weapons. fab365.net/items/302 Please enjoy them too.

[@foxywinterfox7575]

Really well done for the A-10 Thunderbolt II model. Wish there was more 3D printed Aircraft model for the content.

[@fab365_official]

Thank you! If there are many requests in my request page, I will make. Fab365.net/requests

[@foxywinterfox7575]

@@fab365_officialalright, I already make one on your list.

[@tomhofmann5277]

Amazing work! Outstanding modelling and design and top craftsmanship on the print! Greetings from a new subscriber from Argentina

[@fab365_official]

Thank you very much for your comment and greetings.

[@rcosprey-v22ausden3d-druck7]

Sehr Sehr schön. Hut ab. Ich hoffe da kommen noch einige Modelle. Bin begeistert.

[@rarityadf11f]

Awesome! Great job!

[@fab365_official]

Thanks for watching! Please enjoy~

[@bil230660]

Yeaaa,, that's really cool! Nice work!!

[@fab365_official]

Thanks for watching! Please enjoy~

[@msnepthys1]

**freebirds starts fading into the sound**

[@gumarocardenas9966]

We need more youtubers like this Man

[@fab365_official]

Thank you for your comment. I will do my best~

[@x4runnergunnerx9]

Yeah so....I'll be buying this STL lol. Nicely done

[@zombiehunter1152]

That’s a nice looking model

[@fab365_official]

Thanks for watching! Please enjoy!

[@jonathanviterise1681]

I really wish I could learn how to design and get pieces to snap together so tight like you do.

[@zsavage1820]

it's not that hard.. get a program called Matter Control.. you can even take parts that are already there and mod them or ones with high polygon count and make them even finer... very cool program and it has a learning curve but the payoff is well worth the time..

[@jonathanviterise1681]

@@zsavage1820 I already know how to design in fusion 360, but the way this guy designs parts to snap fit so perfectly is obviously a skilled secret that this guy is only accustomed to in 3d print design, I've only ever seen snap fit connections in this guys models.

[@ditoalfrido]

this is cool short movie about 3d printing, lmao 😄👍

[@fab365_official]

Thanks a lot~ Please enjoy~~~ 😆

[@stijnVDA1994]

I think some bombs or drop tank would be neat. Also would the cessna a37 dragonfly be a cool aircraft be cool to replicate in 3d, note: the a37 could have come with like 3 or 4 drop tanks per wing so maybe a cool base option😉

[@GwA927]

Perfect dude

[@fab365_official]

Thank you~ I will do my best~

[@sergione2941]

Muy buen modelo. Seguramente mi próxima impresión.

[@hrexthedoish3419]

Amazing

[@fab365_official]

Thank you~ please enjoy!

[@agff1962]

Excelente. Parabéns.

[@fab365_official]

Thanks for watching! Please enjoy~

[@Kehteron]

Everybody gangsta Til you hear “Mama bird”

[@franksciarretta7128]

I love this design as I do all the others of yours that I have printed and built. I'm just having a bit of an issue with this one with the ailerons. Any suggestions getting parts C & B to fit into A? I'm printing the at 0.1 as suggested but when I put C&B together, I can't get them to snap into A without A breaking. Thanks in advance for any suggestions.

[@robertgriffin662]

Nice! Now she needs some MAVERICKS, J-DAMS, PAVEWAYS and SIDEWINDERS. Awesome build, I've built models of the A-10 that were not as detailed as yours.

[@Tweetsix]

Agreed give him a week he typically has multiple versions of models like his tiger and his t 34

[@freekillspider8890]

I printed the model and there are pre made holes for the pilons

[@lazyyoutuber6473]

So cool

[@fab365_official]

Thanks for watching! Please enjoy~

[@reinaldosorgan3944]

My God, Wonderfull

[@fab365_official]

Thanks for watching! Please enjoy!

[@Otras_cosas_de_Jorgito]

Excelente !!!

[@fab365_official]

Thank you~ please enjoy~

[@freekillspider8890]

Very nice

[@fab365_official]

Thanks for watching! Please enjoy!

[@billyeast6819]

EXCELLENT

[@fab365_official]

Thank you for watching! 😁😁😁

[@cuteboy7496]

오랜만에 보는데 엄청 잘 설계하시네요 ㄷㄷ

[@fab365_official]

감사합니다. 매일 매일 새로운 디자인들을 고민하고 있습니다.

[@morphinebeats]

Great design. Will you be adding the weapon load-outs (10:06) I see there are placements for something like that?

[@morphinebeats]

Well done past me, they did create the A-10 Thunderbolt Armament.

[@Impulzehypro]

just to let you know you dont need to bend the bed that much it could ruin it overtime and the prints should come off on their own once everything has cooled down

[@fab365_official]

I know. but when we are making video, we don’t have much time for wait. Thank you~ 😅

[@jaylenjaylen1618]

Cool

[@forrestneighbors2722]

What adhesive did you use? What color filament for canopy? Thanks.

[@gabrielpoa2007]

I'm printing it right now..lots of hours at 0.12mm layer height 😁

[@fab365_official]

Thank you very much for your printing! I hope you enjoy! When your printing is done, Please share on my review page. fab365.net/reviews

[@morphinebeats]

By the way, What purpose do those bars play when connecting the plane together? Cant they be separated for Purse Mini's? So we can print seperataly

[@jamesb4693]

I so hope you keep doing modern jet aircraft.....would love an F-14 Tomcat and the Lockheed Martin S-3B Viking...that would be a great one, same TF-34 engines as the a-10, has bombay doors, big wing span, MAD boom that comes out the back end.....it was a Sub Hunter/Killer for the US Navy

[@fab365_official]

Could you ask or vote on my request page please? fab365.net/requests Thank you~

[@markroquegeronimo3718]

+1 for the F-14 Tomcat

[@albertomaligne8933]

Excelent job!. What kind and color filament did you use?. thanks

[@fab365_official]

I used normal grey PLA filament. Thank you~

[@thebandoffice53]

Increase the scale to 1/18 and make the canopy removable. And you have a product people will buy for gi Joe's

[@fab365_official]

😅😅😅

[@zoomzoom2276]

It’s kind of like assembling a Spru-Kits model

[@Nico2109.]

Hello. I would like to make all these models, but would need recommendations for the Artillery Sidewinder x2 printer.

[@Bang_Pekky]

BRRRRTTTTTTT

[@fab365_official]

😁😁😁

[@studiolucephotography8484]

hahaha...made my day. First thing that came to mind when the print began. Still infantry's best friend.

[@marianonavarrovelasquez8814]

Great channel. Please, show the printing process.

[@fab365_official]

Please check my design process video.- kzbin.info/www/bejne/rqjUZI1slLaFj5o

[@aarontaylor1484]

Very Well done.....but.....Im crazy and want to see you to get the 500x500x 500 version and scale that to at or minus 450......yeah that would be cool....except for supports thats allways a drag..

[@jcofpv]

Which filaments are you using for this? Very awesome design!👌

[@fab365_official]

I use normal grey PLA filament.

[@Lost_silhouette]

I want it so bad because it will be in my colection

[@WinVisten]

This would make a good ASMR video.

[@fab365_official]

May be…? Thanks for watching!

[@michaellipousky9143]

Awesome! I wish I had a young son to do this with over the weekend. I’m curious as to the cost of the printer filament and how long of printing time it took?

[@florisvandenbeld6621]

Filament is pretty cheap, it's less than 300 grams of filament according to the website in the video description. So that's like 10 dollars/euro's in PLA filament. The total running time is pretty long because of the detail on the parts and their size, 83 hours in total according to the linked website.

[@Flecoide]

que locura es muy bueno!!!! Felicitaciones! tienen planes de hacer algún ovni (ufo) ?

[@MrAcuta73]

Did you do a resin version or just a version without the supports? Can't look at the model without buying, and my FDM printer is out of commission for at least a while. DO have a Saturn S resin machine, though... Edit: Picked up your Millenium Falcon, would buy the AT-AT if I could find it?

[@chrisquibell6434]

How do you make it where the tabs that are included in you parts able to move without pins

[@drewroy22]

Everytime I see the engines on an a10 warthog, I think of podracers from star wars the phantom menace

[@jcofpv]

feels more like the engines on mando's razor crest

[@makewithmegma]

🔥💕👍

[@fab365_official]

😁😁😁

[@patrickunderwood5662]

Can you tell us the profile and width/depth of the panel lines? Thanks!

[@Sardschka]

Wow, it looks so smooth with no stepping visible, what printer and nozzle do you use? Great design!

[@1985HEZE]

ender 3

[@Adlevio]

So basicly 0.4 nozzle and the stock 0,12 profile

[@RealDaveWinter]

There was a lot of stepping visible. Really, a lot.

[@1985HEZE]

@@RealDaveWinter no ... definitly not!.. its like a babys-ass

[@adamlato253]

How you're doing this that your 3D prints are so clean? Not even a single z-axis line.

[@briangutierrez5635]

How much would it cost to build something bigger like A10 70 mm but instead of a 70 you can put a 80mm just saying because I'm looking for something bigger I know I have to modify it myself

[@pnwRC.]

What flexible build plate system do you recommend? What do you use to clean your build plate between prints?

[@fab365_official]

shop.fab365.net/products/twotrees-3d-printer-3d-%D0%BF%D1%80%D0%B8%D0%BD%D1%82%D0%B5%D1%80-parts-pei-spring-steel-sheet-hotbed-pre-applied-flex-magnetic-base-hot-heat-bed-for-cr10-ender-3d-printer-parts-accessories

[@fab365_official]

I use this bed. And I apply hair gel on it.

[@fab365_official]

fab365.net/pages/14013138306/not_sticking_to_bed

[@pnwRC.]

@@fab365_official Thank-You for the information!

[@everythingaviation7945]

You should put a weight in the front or in the cockpit so the palne won't fall back.

[@fab365_official]

That’s right. So I designed supporter for tail.

[@Antesyd]

Look nice. But the canopy is not clear. Can it be done with a resin printer?

[@fab365_official]

Sure~ canopy glass can be printed with resin printer.

[@budavargas]

Dude, more than de STL, please include your slicer profile! I've never been able to get such detail in an FDM printer

[@fab365_official]

If you buy my design, you can download my slicer setting. fab365.net/help/43/how-to-download-slicer-setting

[@digdug7483]

I would love to see P38 Lightening

[@Natakue]

Ok, you outdid your self here. If you ever do another plane please do the F14 Tomcat.

[@fab365_official]

Thank you! If you have a design you would like to request, please leave a picture and description on the request page. fab365.net/requests Thank you~

[@markroquegeronimo3718]

yes F-14 Tomcat please next

[@thePavuk]

beautiful, just missing some loadout.

[@user-og5ql3po3d]

👍😊💕💕💕💕like

[@fab365_official]

😁😁😁

[@meineg21]

is there a stand for display, like the F22?

[@fab365_official]

I have plan for that. Please look forward to it.

[@brunotaciano1218]

Hi. i bought it today. What settings to print with ender 3?

[@fab365_official]

Thank you for your purchasing! you can download my settings. fab365.net/help/43/how-to-download-slicer-setting

[@paolomontagna5286]

😍😍😍😍😍😍

[@fab365_official]

😁😁😁😁😁😁

[@FABIUSMAXIMUZ]

Hoooooowwwww boy🤤🤤🤤🤤

[@fab365_official]

😁😁😁 Please enjoy~

[@wellingtoncosta3685]

Só faltaram os mísseis...conseguiria modelar e incluir no projeto?

[@LucasBatista352]

Muito top o modelos de vocês gostaria de saber se posso comprar e fazer para vender aqui no Brasil parabéns pelo trabalho

[@fab365_official]

To print and sell Fab365 designs, you can purchase Fab365 and a design license. Please check the following page for details. fab365.net/contact/business Currently, 3 companies have purchased licenses for Fab365 and are selling them. www.spacerocketlab.com/collections/cose-per-modellismo/products/falcon-heavy-booster-1-100 www.spacerocketlab.com/collections/cose-per-modellismo/products/spacex-starship-crew shopee.tw/product/8767695/17924014655/ We hope you will join us here too. Thank you.

[@zsavage1820]

Nice model... where is the free version???

[@PHOENIX-lp5wo]

What printer did you use ?

[@minetube9932]

Does it print well and easy?

[@fab365_official]

Sure~~~

[@etandekeijser2818]

Fascinated is this human spaceflight?

[@jasonjulian1]

What? It's the A-10 Thunderbolt, known as the Warthog. Longest serving aircraft in U.S. Military. Can still fly with most of its airframe shot to hell and half a wing.

[@clydebalcom3679]

Hello beautiful. That is the damn sexiest plane in the Air Force inventory.

[@gorillaau]

The plane that they are still trying to find a replacement for. The trouble is that the A-10 Does what it's designed to do very, very well.

[@danielbritton8588]

Could have been a 1/48 scale U.S. Navy catapult that you could have "sold" no matter how many you printed.

[@bruceyoung1343]

Lil hard to see but what flexible build plate do yo use in this video

[@fab365_official]

shop.fab365.net/products/twotrees-3d-printer-3d-%D0%BF%D1%80%D0%B8%D0%BD%D1%82%D0%B5%D1%80-parts-pei-spring-steel-sheet-hotbed-pre-applied-flex-magnetic-base-hot-heat-bed-for-cr10-ender-3d-printer-parts-accessories

[@fab365_official]

I use this bed. really good.

[@bruceyoung1343]

@@fab365_official how much was it?

[@CallMeAnnoDominiAD]

10:20 thumbnail confirmed

[@envynemo4170]

what setting an filament.?

[@operatorstryker9865]

Make a 3d print Su27 and T90 or T72B3 please :)

[@Mac10Ben-Real-IThink]

Can this work on ankermaker? 3D printer?

[@fab365_official]

Sure! I checked AnkerMaker bed size. AnkerMaker bed size is 235 X 235. So Anker Maker 3D printer has enough size to print this design. Please enjoy~

[@ws1742]

무장파트도 공개예정인가요??

[@fab365_official]

당연합니다. 저희 페북에 과정이 공개되어 있습니다. ^^

[@thomaslore730]

What scale is this A-10 in???

[@fab365_official]

1:48

[@thomaslore730]

@@fab365_official Thanks.

[@YlmazDALKIRANscallion]

Now fly it!

[@fab365_official]

😅😅😅

[@gregory3340]

su-25 next :-)

[@KalijahAnderson]

I wonder if this would work on a resin printer.

[@fab365_official]

I haven't tried, but I think it might work if you turn off the support option.

[@KalijahAnderson]

@@fab365_official do you have one to try with?

[@slamoto2]

how is this FDM and not DLP. Looks so much like a resin printer.

[@Kuzgun_Kuskan]

Pleeaasee share the link i have been searching for a good a10 for ages

[@fab365_official]

fab365.net/items/297

[@fab365_official]

Please enjoy~

[@Kuzgun_Kuskan]

@@fab365_official thank you so muchh

[@joshstarrett9931]

How much would you charge for a 1/72 model of AIRWOLF???!!!

[@fab365_official]

Please vote on this request. fab365.net/requests/3514817390/Airwolf_It_would_be_great_if_this_model_was_manufactured_Who_hasn_039_t_seen_the_Airwolf_series_

[@flash_sentry]

Brrrrrrrt

[@fab365_official]

😆😆😆

[@fishdas1591]

Que modelo es la impresora?

[@fab365_official]

Ender 3 S1. www.shop.fab365.net/ender3

[@stickyburger7192]

basicly free revell set

[@thejonathan130]

Is this done on a fileament printer?

[@fab365_official]

Sure!

[@thejonathan130]

@@fab365_official No I mean, what printer did you use? The detail is amazing

[@Aagggyy]

@@thejonathan130 He’s most likely using the Ender 3 pro or any of the Ender 3 printers.

[@thejonathan130]

@@Aagggyy Thanks

[@kavorka8855]

PLA?

[@fab365_official]

Yes. I always use PLA.

[@adunno7355]

Make an aircraft carrier with little planes on it

[@joj4096]

Try adding color as if you’re making a plastic model kit

[@davidperezleon5486]

Zusuki jimny please

[@SuperVwgolf5]

what is this 2d drucker ender3 or ender5

[@fab365_official]

drucker? what is drucker?

[@SuperVwgolf5]

@@fab365_official 3 Drucker

[@SuperVwgolf5]

Printer

[@tigergamejankeaw6297]

What scale?

[@fab365_official]

1 : 48 Scale

[@tigergamejankeaw6297]

@@fab365_official do you have king tiger 1/18 scale?