A6GF1,Hyundai Elantra Code P0711

In this video i go over what caused this code. In this case the harness had to be updated. The updated harness is a one piece harness and the Temp sensor is built right in. The valvebody has to come out to remove and install the updated internal harness. I also show how to remove the valvebody, install the new harness and reinstall the valvebody. There is also a TSB on this code Hyundai Bulletin #14-AT=010.
Happy Easter to all and please stay safe.

[@aurelioaparicio7854]

Mr Gary you're a nice person. Sharing and taking the time to teach us.

[@GaryFerraro]

aurelio aparicio Thanks for watching. Glad I could help some people out there

[@oldschool9746]

Thank you, Gary, GOD bless you and your family and your business!

[@GaryFerraro]

Thank you, so far no bad, have the guys on rotating days and haven't had to tap into my line of credit yet, this past week was ok, towed about 6 cars in, so we have work for this week coming. Thanks and Stay Safe

[@JuanOrtiz-mo8be]

Happy Easter Gary , you sure are an essential worker. Stay safe.

[@GaryFerraro]

Thank you, so far we are all ok

[@CaptainNero]

Thank you now I know how to get at my speed sensors if I ever need to and change the harness if I ever need to. Have the A6MF2 in a 17 santa fe.

[@johnnycarpenter1744]

Gary just saved me $750 Thanks for a quality video Keep it up you are helping others survive in this ruff world Thanks again 👍

[@GaryFerraro]

Glad i could help

[@Julie6550]

Of course you can’t just buy the sensor. Of course they updated the harness so you have to buy a whole huge part for an issue with a little sensor. Of course. These people have a special place in hell that profit from that crap. But that is no comment on you and the service you do, Gary! You’re a gem for teaching people!

[@GaryFerraro]

Some cars you still can, this model it's now all in one

[@russnewton10]

Thanks for this video. I just used it to help me fix my mom's 2011 Santa fe. The lower right bolt on the pan is rough to get to in the car because of the cradle, but it was pretty straight forward. I also had to remove the air box, the battery and tray, and the cooler lines.

[@GaryFerraro]

Did you have the P0711 code

[@russnewton10]

@@GaryFerraro yes, and it was hard shifting

[@ovidiolibreros9323]

awesome thanks for video learning every day greeting from colombia

[@GaryFerraro]

Greetings from New York, Stay safe

[@G-TAKLA]

Happy Ester Gary .....100000 like

[@GaryFerraro]

Thank you, Happy Easter to you too

[@samiam3595]

Thank you so much

[@billk5727]

Thanks Gary, and I hope that you had a nice Easter. How are the auto repair businesses holding up in your area, staying reasonably busy?? Stay Safe, Bill

[@GaryFerraro]

Hi Bill, actually yes, staying busy. Stay safe

[@lukestrasser]

Nice video on a unit I'm not familiar with Gary. Do you keep many core units on the shelf? Seems like the days of having a unit in stock are gone with so many different units in use these days. Cheers, Happy Easter.

[@GaryFerraro]

Had a core because customer supplied us with a used unit

[@clearwood]

Thank you!

[@GaryFerraro]

Tanks for watching Jack. stay safe

[@MichaelSmith-dr9sf]

Hyundai has issued yet another TSB #20-AT-014H. Pretty much same info as on previous TSB. But with updated models. Same info you provided. Replace with updated harness......issued 4-9-2020 probably same time you was filming this video.

[@GaryFerraro]

Yes, Thanks for watching

[@aaronleslie4856]

Hi gary, I watch a lot of your videos and I have learned so much. Thank you. I live in Belize, central america. Don't know any other way to contact you. I have a problem with a6mf1 kia sportage. With delay going into 3rd gear. Changed speed sensors changed solenoids still have problem. Is there any advice you can give? Would really appreciate it.

[@ACoupleStoners]

Fantastic video! I always appreciate people sharing how to fix a problem they know others have as well. I'm considering doing this repair myself. Being that I can actually get the old style stand alone sensor, would there be any problem with replacing just the sensor on a 2012 sonata like they used to do? Do I really need to pull the valve body and switch to the new style?

[@GaryFerraro]

yes, to get the harness off

[@jooper99]

What’s up with Transtar pricing? Bushing prices it shows me online are like twice as much as direct from Omega/Sonnax, etc...

[@bradfader691]

Doing mine this weekend. I got a hold of just the temp sensor without the harness. 2012 elentra. P0711 short shifting, over revving and hard shifts.

[@GaryFerraro]

should take care of it

[@bradfader691]

@@GaryFerraro yea seems like the cause an solution based on what ive seen with your videos so far

[@aviator1683]

Hi Gary do you happen to know what could be bad in a E40D Transmission on a 1996 Ford F-250. The symptom is that the truck dies when I shift it in to D or Secod but I doesn’t die in reverse or low gear I pulled the codes and I only have one which is the 629 for the tcc circuit. I did my checks and the solenoid has 20ohms resistance and my wiring is good the tcm seems to be working good so I’m thinking is internal in the transmission. I don’t know if there is another test that I can do ? Thank you in advance

[@GaryFerraro]

Did you try unplugging the solenoids to see what happens. E-mail me [e-mail] i'm just seeing this now, sorry

[@justaviewerortwo2924]

Awesome Video detailed and well explained. My question would be what if one the seals comes out is it a big deal to put new ones in ?

[@GaryFerraro]

Not a big deal very simple to do but to get them may be an issue, only place may be the dealer if they sell them separately

[@4eme434]

Hello! If possible, I would like to ask you for an opinion, or an adviser to guide me, I saw some videos that you upload on youtube when I was trying to understand a problem that I have with my car, and precisely with my automatic gearbox, it's been almost a month since it appeared, it's when I start the engine I hear a noise like a purr, and I'm almost 90% sure that it comes from my automatic gearbox of my hyundai accent RB model 2017, and the sound stops when i put the gearbox in R position

[@GaryFerraro]

Hello, What if you put the car in drive, does the noise stop? as you start driving does the noise come back?

[@zaeiki]

What's the part number of the harness , so I can find it in the internet

[@juanpolanco7490]

Hello. Thanks for your videos, they are very constructive. Could you please tell me how you removed the plug from the harness that is connected to the temperature sensor as explained at minute 10:27. because I understand that it is very difficult to remove Thank you.

[@GaryFerraro]

I just stick a pick in there and and pry outward very gently, the updated harness has the sensor built into the harness

[@nossjsjajsjs2957]

Yo Gary do you remember how many miles was on it when it happened and do you think this transmission is reliable

[@hexxbans3726]

I have got kia cerato 1.8 L engine with this transmission and this transmission has been nothing but trouble with just 50000 km .

[@zaeiki]

i was looking for the sensor for hyundai sonata 12 but it is really very hard to find on hyundai page, what is the part number for hyundai sonata 12 gdi? since that part number is not the same as the Elantra

[@GaryFerraro]

where are you located?

[@Thunderroad8517]

Service info says there is 5V on the temp sensor wire . I have 3.3 . Should this be a concern? Please advise . Thanks in advance ….

[@GaryFerraro]

Are there codes present?

[@Thunderroad8517]

@@GaryFerraro yes. P0711

[@GaryFerraro]

the harness has been updated, installing the updated harness usually fixes the problem@@Thunderroad8517

[@hayrettinerden9530]

hello.my vehicle hyundai ix 35 gdi type gearbox type A6GF1 gearbox 1 and 2 gears while accelerating the sound of metal milking. Sometimes it is 3rd gear. I changed the clutch and steel kits to a new one. The sound decreased but it did not improve. I did not change the 3-5 reverse and overdrive pistons. Do I need to change it? Would you help me with this topic ?

[@GaryFerraro]

Do you hear this noise all the time or when the car warms up?

[@hayrettinerden9530]

@@GaryFerraro always when you take off in general, when you first move, the more noise gets louder when the 1st and 2nd gear is also.thank you.

[@GaryFerraro]

@@hayrettinerden9530 did you find anything wrong inside the trans?

[@hayrettinerden9530]

@@GaryFerraro no.I didn't just change the Pistons, I didn't replace them.I doubt them.

[@GaryFerraro]

@@hayrettinerden9530 Are you sure it is the trans? Is this AWD or FWD How are the wheel bearings, how are the mounts

[@GodofKings-Raj]

My hyundai i20 automatic petrol having 3rd gear incorrect ratio code p0733 error code.. Guide

[@sonjadez9712]

Great video but I don’t understand why we’d have to change the WHOLE harness just for the temp control sensor. Seems like a waste of time and money for the consumer but more money in the pocket of the mechanic. Also more money to the manufacturer.

[@juliusedghill5351]

Hi Gary nice video can you please help me source a valve body for Hyundai Accent 2014

[@GaryFerraro]

If you go on line, there are valvebody companies, I use Reamman and also valvebody pro's

[@hondaveetc82]

Your supposed to check those in neutral...

[@ayazbhatti2990]

hi sir i am automotive technician i work auto electrical and mechanical work i want to work with you