Homemade Rifling Machine | New Idea Solve An Old Problem

  Рет қаралды 121,126

AB-SHOP

AB-SHOP

Күн бұрын

Пікірлер: 90
@ftownroe
@ftownroe 8 ай бұрын
Another absolutely fantastic project.
@ab-shop
@ab-shop 8 ай бұрын
Thanks for your wonderful comment Fred!!
@TheRecreationalMachinist
@TheRecreationalMachinist 8 ай бұрын
Cheers Alberto. Good to see you busy in the workshop again 👍 🇬🇧
@ab-shop
@ab-shop 8 ай бұрын
Hi Matt! Yes! :) i need 1 month 1/2 to arrive to the end, to win a bet with a friend that now have to pay me 2 beers!🤭 No great pitch on lathe? Yes, It Is possible 😀
@Rustinox
@Rustinox 9 ай бұрын
That's a nice project. With a lot of thinking involved.
@ab-shop
@ab-shop 9 ай бұрын
Thanks Rusti, not easy to make a cutter that have to cut 😀
@MyLilMule
@MyLilMule 9 ай бұрын
Nicely engineered, Alberto. Well done.
@ab-shop
@ab-shop 9 ай бұрын
Ciao Greg! Very happy to hear from you!! Happy you think that about the video, first "how to make a long pitch", second " how to make a cutter that cut"! Ciao Greg have a nice week!! Alberto
@williammorris1763
@williammorris1763 8 ай бұрын
Looks good. very similar to the old machines they originally made to semi automate this process. more advanced than the musket bore OG wood one too.
@ab-shop
@ab-shop 8 ай бұрын
Thanks William, you know i dream to make this device for 1 year, i decide to make it after the idler joint idea: before that the project was stuck! Another problem to solve was the cutter, in HSS not problem but in normal carbon steel not easy to make sharp edge, that It gas to cut like a knife!
@GardenTractorBoy
@GardenTractorBoy 8 ай бұрын
This looked like a fun project and it turned out great, thanks
@ab-shop
@ab-shop 8 ай бұрын
Thanks Joseph, the most big challenge until now...here in my channel !! :)
@andrewdolinskiatcarpathian
@andrewdolinskiatcarpathian 9 ай бұрын
Wow! Alberto. Now I know why you have been so quiet recently. What a project. So involved. So many processes. Enthralling from beginning to end. Thank you for sharing. 👏👏👍😀
@ab-shop
@ab-shop 9 ай бұрын
Ciao dear Andrew, thank you for stopping by! Yes first the "how to make a long pitch", after " how to make a cutter that cut 🤭", so It Is a tool and a machine in the same time 😀 Happy to hear from you dear Andrew, see you soon with a new project! Alberto 🇮🇹
@Preso58
@Preso58 9 ай бұрын
Wow, made my brain hurt just looking at the build. Nice job, Alberto.
@ab-shop
@ab-shop 8 ай бұрын
Wow Is My answer to your comment, Mark 🤭 Thanks Mark! It was a long time that i tried to solve that " problem", a small pitch in the same axis of a long pitch! 😀
@Gunny-Smith
@Gunny-Smith 13 сағат бұрын
Beautiful work!
@ab-shop
@ab-shop 13 сағат бұрын
@@Gunny-Smith Thanks a bunch Gunny, happy that you like my work!
@termlimit
@termlimit 7 ай бұрын
Awesome project! Any chance you have plans? Really interested in how you made the cam for the cutter to use a screw for precise depth of cut adjustments. Thank you!
@ab-shop
@ab-shop 7 ай бұрын
Thanks for your comment! I upload the drawings on "Homemadetools.com", there you can find it!!
@termlimit
@termlimit 7 ай бұрын
@@ab-shop brilliant, found it. Thank you!
@ab-shop
@ab-shop 7 ай бұрын
@@termlimit You are welcome !
@MrCheezeus
@MrCheezeus 8 ай бұрын
you really should remove your wedding band while machining ... it's real easy to receive a degloving injury working with heavy machinery
@allangibson8494
@allangibson8494 15 күн бұрын
Any jewellery is a potential issue (along with long hair, beards and loose clothing). Very easy to have a life changing injury with machine tools.
@soren2893
@soren2893 4 күн бұрын
All of that stuff makes me cringe
@ETsBees
@ETsBees 10 сағат бұрын
Yeah, and people have even had their finger torn off without rings, so just think about it.
@daveb3910
@daveb3910 8 ай бұрын
Really like your choice of music
@ab-shop
@ab-shop 8 ай бұрын
Happy, Dave, that you like it !! :)
@williammorris1763
@williammorris1763 8 ай бұрын
Same ❤ 🔥
@torchmd
@torchmd 8 ай бұрын
That’s funny. I can{t stand the music. To each their own.
@Eatherbreather
@Eatherbreather 8 ай бұрын
I can't find the music - especially the first track. Can anyone tell me what it is?
@billdoodson4232
@billdoodson4232 9 ай бұрын
So; I'm going to be really interested to see what this has been built for. That looks like it will be the real project.
@ab-shop
@ab-shop 9 ай бұрын
Hi bill and thanks for the message, it is a machine capable of performing a "helix" cut with a pitch that is not found on a lathe, because threads with a pitch of 250 mm or more do not exist; it was a bet with myself to be able to build a compact machine that could do that type of work, therefore to rifling a gun barrel or to create slots for lubrication (spidering)
@billdoodson4232
@billdoodson4232 9 ай бұрын
@ab-shop There is no better reason than, "I wonder if I can. Yes I can"
@ab-shop
@ab-shop 9 ай бұрын
@@billdoodson4232 Yes really!!
@benedettacastagna8856
@benedettacastagna8856 9 ай бұрын
Complimenti Alberto, un bel progetto 💪🏻
@ab-shop
@ab-shop 9 ай бұрын
Grazie 😀orgoglioso ti sia piaciuto 😀❤️
@canadianoddy8504
@canadianoddy8504 8 ай бұрын
Very nice work. Clearly you are very skilled. I made a Clint Westwood design rifling machine out of scrap metal I had laying around. It did work ---- sort of. The real problem is doing small bore rifling like .22 cal. Your machine would only be good for large caliber like 9mm as is the Clint Westwood design. Just my opinions. CO
@olegplisiuk4687
@olegplisiuk4687 8 ай бұрын
Это не совсем так. Сама конструкция прекрасно сработает с любым калибром. Но сам резец, для 22lr, имеет другой вид. Он цельный, и роль и оси и пружины выполняет разрез в материале резца. Представте себе цангу фрезерного станка, на одной из губок которой торчит зуб резца, а вместо фрезы - в коническое отверстие в середине - вкручивается винт, раздвигающий губки. Вот так и выглядит резец для 22. Только две губки всего
@canadianoddy8504
@canadianoddy8504 8 ай бұрын
@@olegplisiuk4687 Спасибо, что прояснили это. Я обнаружил, что любой стержень, на котором есть резец для калибра .22, стержень очень маленький и будет гнуться, если только он не очень короткий, как у короткого ствола пистолета. О стволах под калибр .22 не может быть и речи.
@olegplisiuk4687
@olegplisiuk4687 8 ай бұрын
@@canadianoddy8504 нет- нет! При нарезке 22 калибра - резец не толкается! Он тянется, и натянутый стержень становится ровным как струна. Проблема в том, что он способен скручиваться, и не передавать резцу угол копира. Поэтому сам резец обязан быть с углом, соответствующим углу копира ( твисту), и тогда он правильно идет в металле
@canadianoddy8504
@canadianoddy8504 8 ай бұрын
@@olegplisiuk4687 Теперь это имеет смысл.
@ab-shop
@ab-shop 8 ай бұрын
Thanks to everyone for the comments, for sure you can get to 8 mm, the first version of my video was with an 8 (mm) head (in fact the central shaft has a thin diameter of 7.5 mm to be able to switch to minimum in an 8 mm hole) but then I encountered friction problems; it certainly cannot be used, given how it is built, for a .22 LR, in which case you need a "button tool", but also a hydraulic press, due to the high efforts it requires!!
@DClarke1954
@DClarke1954 12 күн бұрын
Great project, awful music. I'd rather hear the machine running than that.
@ab-shop
@ab-shop 12 күн бұрын
@@DClarke1954 Thank you for your comment: i know about It, in the last video i made music and machine sounds, to offer both! 😀 A great ciao from Italy, Alberto 🇮🇹
@BobJury-lf6bb
@BobJury-lf6bb 5 күн бұрын
How do you rifle a 30” barrel with that?
@ab-shop
@ab-shop 5 күн бұрын
@@BobJury-lf6bb Hi Bob, with the home 3D printer you can arrive at 300 ( mm) so around 10-11" inches, but with a bigger lathe then mine; my challenge was to separate a long pitch from a short pitch ( like a screw) in the same axis.
@greatdane3343
@greatdane3343 12 күн бұрын
Very interesting. Thanks for sharing.
@everythingtv1910
@everythingtv1910 8 ай бұрын
I like this video it is amazing thank you for sharing to view and i wish your channel more success
@fattmouth7715
@fattmouth7715 3 ай бұрын
Fantastic video but you almost lost me with that TIG welding
@samrodian919
@samrodian919 20 күн бұрын
Yes it was of pigeon shit MIG quality lol
@RustyInventions-wz6ir
@RustyInventions-wz6ir 9 ай бұрын
Very interesting. Good work
@ab-shop
@ab-shop 9 ай бұрын
Thank you Rusty 😀
@fainderskurs-koi8767
@fainderskurs-koi8767 9 ай бұрын
Лайк. Хорошее видео.👍
@wellingtonrodrigues6659
@wellingtonrodrigues6659 2 ай бұрын
very good idea
@ab-shop
@ab-shop 2 ай бұрын
@@wellingtonrodrigues6659 Thanks for your kind message, happy you liked it! Alberto
@jionghanqin9970
@jionghanqin9970 7 ай бұрын
nice project.
@ab-shop
@ab-shop 7 ай бұрын
Thanks 😀
@simonesalamon4388
@simonesalamon4388 9 ай бұрын
Grande! Conosci la miss passione quindi non posso che dirti ❤
@ab-shop
@ab-shop 9 ай бұрын
Grazie mille 😀❤️
@floutv4004
@floutv4004 9 ай бұрын
Was hast du da genau genau gebaut und was kann man damit manchen?
@ab-shop
@ab-shop 9 ай бұрын
Guten Morgen, ich habe eine Maschine gebaut, die in der Lage ist, einen Propeller mit einer sehr großen Steigung zu beschreiben. Mit dieser Maschine können Sie beispielsweise das Gewehr der Läufe oder die Ölkanäle zur Schmierung erstellen! Damit habe ich eine Wette gewonnen, nämlich dass es auch auf einer Standard-Drehmaschine möglich ist, Bearbeitungen mit enormen Teilungen wie 1:250 mm durchzuführen.
@adriandumitrascu4292
@adriandumitrascu4292 18 күн бұрын
homemade ECM is the way, no need a lathe for that :D
@allangibson8494
@allangibson8494 15 күн бұрын
You obviously haven’t tried to make an ECM machine without a lathe…
@adriandumitrascu4292
@adriandumitrascu4292 12 күн бұрын
@@allangibson8494 you obvious dont know how ecm or 3d printing works and what can be done with them kzbin.info/www/bejne/fJjCoGythraUrtU&ab_channel=AmphoraVideo and another one kzbin.info/www/bejne/d6qze2WYp5qBfLM&ab_channel=AGCast
@PaddyFromPaddistan
@PaddyFromPaddistan 11 күн бұрын
​@@adriandumitrascu4292you seem quite retarded to assume one needs 3d printing experience in order to understand a process that predates 3d printing.. 😂 Sure, mandrels and other parts can be made by any idiot with a 3d printer and a downloaded .STL that someone else made.. The accuracy and quality of said mandrels and parts is another thing all together. At least a semi competent machinist can make one with a great amount of accuracy and also durability as they aren't anywhere near as limited with regard to material selection.
@agentcovert
@agentcovert 4 ай бұрын
The VFD on the lathe looks scary.. unfortunately VFDs have a nasty problem with frosting then fluting the bearings on a machine..as stray power builds up on the electric motor shaft being powered to about 70v then finds ground / earth thru the bearings a few dozen times per second of use..at 600 - 700hrs serious damage has happened and the bearings need replacement.. but simply adding a ground/ earth strap to the motor shaft giving a path not thru the bearings prevents this entirely.. the better option is to have a rotary phase converter that powers each machine.. usually a single rotary phase converter is used for the entire shop being a one man set up..Cheers..
@ab-shop
@ab-shop 4 ай бұрын
@@agentcovert Thanks for your comment, i put 4 points of the lathe ( One Is the Dahlander motor) to the earth, from 2017 when i installed the VFD, no problems.( 7 years until now)
@brighambaker3381
@brighambaker3381 8 ай бұрын
This video is worth a subscribe!
@ab-shop
@ab-shop 8 ай бұрын
Thanks so much!!
@renzomattiolo9040
@renzomattiolo9040 9 ай бұрын
ciao Alberto vedo un progetto esteso -si parte da un idea fissa poi si disegna e via di tornio e fresa ..salda affila e montaggio - si un opera così definita è molto impegnativa ....però quel colore della camma ..mai visto....torce un pò la vistaa
@ab-shop
@ab-shop 9 ай бұрын
Grazie Renzo ho scelto arancione perché attrae la vista!! Un super grazie per il tuo commento e non solo!!😀
@hulksmash6476
@hulksmash6476 2 ай бұрын
Why not use a rifling button?
@ab-shop
@ab-shop 2 ай бұрын
@@hulksmash6476 Yes correct, because i don't have a press! So i tried another way to arrive at the same result, using a mix of ideas, 3D print parts and lathe parts.
@hulksmash6476
@hulksmash6476 2 ай бұрын
@ab-shop clock you bar (dti) in chuck and push through using tailstock with ejector pins of increasing lengths. It would be really cool to see you build a jig and maybe even put hydraulic cylinder, bolt to floor? I am no professional gunsmith dude, I did mechanical engineering but in injection moulding industry. Keep on keeping on 😉
@ab-shop
@ab-shop 2 ай бұрын
@@hulksmash6476 Thanks for your comment, i will think about It, every new idea can be a new challenge and a new video!! A big ciao from Italy, Alberto 🇮🇹
@MutumDevarishi
@MutumDevarishi 8 ай бұрын
What's this method called?
@ab-shop
@ab-shop 8 ай бұрын
Hi Mutum, the method Is barrel rifling, It Is an old method with a new idea, putting in the same axis a small pitch and a long pitch ( i have described on the video information), you can make the longer pitch you want!
@geppettocollodi8945
@geppettocollodi8945 17 күн бұрын
Is that for a pistol with a 1.5 inch long barrel?
@ab-shop
@ab-shop 17 күн бұрын
@@geppettocollodi8945 Ciao Geppetto non è per nessuna pistola, solo una sfida che ho voluto vincere da tempo con me stesso, si possono fare rigature di qualsiasi passo e su diametri da 14 mm in su, sotto è difficile per la costruzione del porta utensile che diventa laboriosa e micrometrica..si possono fare anche ragnature per lubrificante come quelle che si vedono sulle bussole delle macchine utensili. Ciao, Alberto
@geoloussian5856
@geoloussian5856 8 ай бұрын
What called this digital piece on your tailstock to have accurate measurement , i want to buy similiar
@ab-shop
@ab-shop 8 ай бұрын
Hi and thanks for your comment: It a normal digital caliper that i modified to be installed on my tailstock: on my channel, if you search, you can find the video where i show how to make It, the only difficult thing it's the drilling operation, because It Is hardened steel!
@MegaRiffraff
@MegaRiffraff 8 ай бұрын
👍🏻
@kreativitasku5048
@kreativitasku5048 Ай бұрын
I cant make rifling barrel tools only 5$ Just use pipe and rod,
@thaiprivateeyes
@thaiprivateeyes 6 ай бұрын
Dont really know how can justofy home made if using commercial machinery Home made to me means made at home with house hold objects
@ab-shop
@ab-shop 6 ай бұрын
Difficult to make a stepper motor at home..
@williamdevitt7866
@williamdevitt7866 7 ай бұрын
nice but say make one for a 30 caliber bore and say try it on a 24 inch long barrel that will be when i an impressed just saying what you have shown is just basic machining 101
@ab-shop
@ab-shop 7 ай бұрын
Thanks, if you consider a cam built with a 3D printer you can easily reach 300 mm, therefore a 300 mm barrel; if you always have the cam made in plastic (because it makes no sense in steel if you don't make 100 barrels a day in series...) but with a CNC milling machine, you can easily reach 24 inches and even more, obviously it must have a larger lathe then mine: the limit is represented by the length of the lathe, with my lathe I reach a maximum of 150 mm; so, if you think about it, it's not really basic machining…
Players push long pins through a cardboard box attempting to pop the balloon!
00:31
Why no RONALDO?! 🤔⚽️
00:28
Celine Dept
Рет қаралды 54 МЛН
А я думаю что за звук такой знакомый? 😂😂😂
00:15
Денис Кукояка
Рет қаралды 3,2 МЛН
Making barrel rifling using 6 flute reamers
8:09
PCP Air Guns
Рет қаралды 204 М.
Poor Man’s Anti-Vibration Boring Bar Holder- Cutting Down on Resonance!
17:27
Внутренний шпонпаз за 2 минуты
18:51
Mehamozg
Рет қаралды 204 М.
This Project SAVED Me THOU$AND$ $$$
31:21
GRINwood
Рет қаралды 1,8 МЛН
I BUILD a Knurling MACHINE for Serial Manufacturing
30:07
Matthew's Tools
Рет қаралды 117 М.
Home Shop Rifling!
24:56
markserbu
Рет қаралды 2,1 МЛН
What's in the box?! 1890s Safe [Restoration]
20:44
Hand Tool Rescue
Рет қаралды 322 М.
Best Mini Lathe mod ever!! No more chatter!
16:05
Brute4rce
Рет қаралды 86 М.