Err code then E-1 on every new test strip. How do I fix this? Very discouraged with this new Guide Me meter!!
@zlatdevproduction23134 ай бұрын
Did you find a fix
@Adeelkazmi1897 ай бұрын
It's a useful information ❤
@jacquiemoppett23919 ай бұрын
Very useful
@learnbloodsugartesting9 ай бұрын
Glad to hear that
@roger55es Жыл бұрын
Great description of accu chek . Any idea of what err code exp means? Thanks
@learnbloodsugartesting Жыл бұрын
It is not listed in the user guide, it may indicate the test strips are expired.
@Abdalla.Al-Kilani6 ай бұрын
accu chek instant or accu chek guide, which one is better please?
@sivaprakash.s49847 ай бұрын
Thank you🙏
@josemelendez6573 Жыл бұрын
Como soluciono el err
@cynthiaan11 ай бұрын
Thank you!!❤
@krishneegovender-moller108111 ай бұрын
Thank you very helpful!
@OnceuponAtime-q5j6 ай бұрын
It always shows 6.9 mmol/L whenever i try to switch on the device. And when i click on the on/off button again there appears 7 30 90 day average option. And nothing else when i check my glucose
@turbopokey6 ай бұрын
Mine comes on automatically when I insert the tester strip. Not sure what it’s showing with the on/off button as I don’t usually use that except to turn it off.
@mrsinglelive35902 ай бұрын
Sir I have changed the battery but still e 7 occuring what should I do
@Umar-ue7hy4 ай бұрын
is error 9 means low battery?
@habeebunnisa87313 ай бұрын
Means
@mrpush253211 ай бұрын
E-9 won't go away even with new batteries at 3.3v. Now what?
@g.freeman21415 ай бұрын
have the same problem...do you found a solution?
@habeebunnisa87313 ай бұрын
Same reason what to do
@engrace70753 ай бұрын
Had the same issue. On checking further, the batteries seemed to be loose fitting. Tried fixing the issue by placing a piece of paper to keep the batteries tight in its place. And with this it started working again!
@susannbasta297211 ай бұрын
Test strip will not "click" in to reli On machine
@learnbloodsugartesting11 ай бұрын
You may want to ensure you have the compatible Reli On test strips, as there are at least 3 different types of Reli On test strips.
@Umar-ue7hy4 ай бұрын
error 9?
@leyobligacion97577 ай бұрын
Mine is, upon opening and using it through usb cable. It says “PC” and blinking.
@learnbloodsugartesting7 ай бұрын
The usb cable needs to be unplugged while testing.
@leyobligacion97577 ай бұрын
@@learnbloodsugartesting thanks ❤
@chuchaychay3268 Жыл бұрын
Hello sir can you help me, I select the wrong language and cannot correct it.. I'm using accu-chek.. thank you
@ahlamabrh55911 ай бұрын
How can i charge it ?
@learnbloodsugartesting11 ай бұрын
It is not rechargeable, it has a replaceable battery.
@turbopokey Жыл бұрын
I keep getting “error 4” almost as soon as I touch the strip to the blood. I’ve tried 6 times and never gotten a reading, only error code.
@piyalakkaewbudda1317 Жыл бұрын
same problem,what should i do?
@turbopokey Жыл бұрын
@@piyalakkaewbudda1317 -ok, got it to work, apparently you need to squeeze out a bigger blood drop to make it work. Oh and make sure your puncture area is fully dry, drop might start leaching away through the fingerprint whorls if is still wet.
@turbopokey Жыл бұрын
Might have to work at it for a bit, if it just won’t come out anymore, you might have to use a deeper setting on the puncture device.
@FuzzyScaredyCat9 ай бұрын
@@piyalakkaewbudda1317it means your strips have expired.
@PamfromPensacola6 ай бұрын
I kept getting an error code also. So mad. After wasting ( strips and lancets, I looked up the error messages. I must not have been putting enough blood on the test strip because the 6th time it did give me my reading. Yay!
@rajnishranjan87717 ай бұрын
Repetedly showing error message..how i can fix it..