Acrorip V10.3 on the Epson XP15000 | Settings to Print to A4 and A3 Paper and Film

Acrorip V10.3 RIP software works on the Epson Expression Photo HD XP-15000 Printer. It is important to use the correct settings depending on the PAPER SIZE that you are printing to, and also to ensure you have entered the correct page width that the PRINTER is capable of printing to (which is 13 inches). Both the PAPER SIZE (which is set in the View - Template tab) and the PRINTER PRINTABLE WIDTH SIZE (which is set in the Layout - Page Width section) need to be properly set. This video shows what those settings need to be for A4 paper / film and also A3 film.
It is also important to note that some film is more translucent/transparent than other film, and since printer has sensors that serve the purpose of sensing the paper to identify the width of the paper, if the printer's sensors do not recognize the film properly (such as if it is too transparent and the sensors don't "see" the full width of the film), the printer may not print to the edges of the film - this does not have to do with the RIP, it has to do with the printer sensors not sensing the film (the printer is expecting paper, not transparent film). If this occurs, you could add a few sheets of paper behind the film and this should fool the printer into sensing the full width of the film.

[@Sr_iRL]

I’ve been looking at this quite closely. I just recently figured out DTF and this was very informative and interesting!

[@calvindusch2084]

I have an xp 15000 and acrorip 10.5 . I can't get my printer to print. It sends but just goes into que. I've tried everything I can think of. Printer works with trial version of cad link no problem. Any ideas or solutions?

[@michaelm5480]

Do I need to make any more changes to the printer driver or is it just installed and best not to move anything?

[@delr3151]

Why the software is not downloadable? The UK dealer link on the Acrorip website doest work.

[@johngrate8100]

So how fast does that printer print with dtf ink?

[@MrBofficial0913]

I got my epson xp 15000 converted to DTF updated everything installed chiless firmware, followed all the procedure then got my acroripV11.2 installed my printer printed but the image i got in my software didnt came out it just blue ink all over the paper no image at all. Need help please

[@nsix9]

does the film always need to be set to the far right location ?

[@Unreal_hanruki]

Hi, why it does not print the white background? Did you edit it? Whatvis the setting? Thanks

[@zeimusic3473]

Thats is what i need to know too

[@johngrate8100]

And how is the maintenance on this printer?

[@melissadaniels1848]

My printer is only printing a middle strip Of my design. Please help

[@leesahcage3297]

Great video, do you have any videos on the color and white settings for DTF transfers?

[@lissettechanlatte8923]

How I print full page?

[@titipongsaelee9383]

I want to know if Acrorip 9.03 works with xp-15000 printer or not.

[@smooth6181]

No. That's what I tried to start with

[@sandorsebestyen8620]

Tell me please setting of Printout-size Revision. Thanks

[@printetc]

acrorip.com/forum/?qa=230/what-are-the-recommended-page-width-settings-epson-15000-8550

[@tomaszbak26]

what did you do in the printer settings to prevent the film from jamming in the printer?