Daily Maintenance on the XP15000

[@Searching4Knowledge]

Thank you. I’ll watch this video every night after printing until its memorized

[@janinlopez8825]

I wish I had found you awesome videos before I fryed my printer. Currently on the hunt for a new one. Thank you for the great tutorials

[@ssvcustomtransfers]

I offer converted printers. www.southernsassvinyl.com/collections/dtf-converted-printers

[@janinlopez8825]

@@ssvcustomtransfers thank you I will take a 👀

[@izzysc24]

How did u fry it I just order one😨

[@jeanaatkins8083]

I fried mine too, luckily I was able to send it back and get another one. I feel like I fried it because I was pouring so much cleaner in it. I didn't use cleaning carts.

[@sergiomm1020]

Sorry, I bought an xp 15000 printer and I have little experience with this model, I'm having problems with the print head that doesn't finish printing well, I've talked to the technical service and they told me what it is, because air is getting into it to the print head, leave the printer for about 24 hours without using it so that the air comes out only due to gravity and if the head will fill with ink, he has told me that I have to remove the two caps for the refillable cartridges but In your video I see that the cartridges have the two caps on, without the two caps, or with the two caps? Thank you and best regards.

[@AnaHernandez08]

I’ve tried all these and my Cyan is not printing out strong enough! 😭 I’ve cleaned it daily for 3 weeks straight and nothing. After doing the napkin and alcohol I can see the Cyan on the napkin but it’s coming out spotted on the nozzle check, even after the print head cleaning. I’m running out of ideas. Help please ! 😭

[@cindyhouben7264]

Hi, I like your video's, I watched thema more then once. I am learning a lot. I have a question. The cleaning cartridges, do they have a chip? So I know which to purchase. A lot of greetings Cindy

[@crcdesign9886]

Can I leave it like that for a week ? Or is this only an overnight cleaning process?

[@jorgeromero8474]

My printer is printing just magenta, I’ve done this a couple of times and I don’t know what else I can do. Is it the printhead? It is new. 😰

[@tinyrandomthings]

I found there are a few (cheaper than the OEM) replacement ink, like DTF or sublimation. Of course we would need a chipless firmware/cartridges, but beside that, do I need to do anything to fill it by DTF or sublimation? (I wish it was simple just as filling with a syringe)

[@WeirdWatchShorts]

So do your cartridges ever leak. I bought them and was afraid to install because people were stating they leak and ruined the motherboard and the print head. If u have a link to the kind you use and any issues.

[@w5ttx]

Let me ask a stupid question, I'm assuming that the daily cleaning is required because of the DTF ink and would not be required if you used the OEM ink to print photos etc...

[@ssvcustomtransfers]

Correct

[@w5ttx]

@@ssvcustomtransfers Thank you very much, have a blessed day!

[@Lilham90]

Will this work if it was turned into chipless?

[@thepunisher794]

Great tutorial!

[@shaskull]

Thank you so much for this video!!

[@ssvcustomtransfers]

Please let me know if there is anything you want to see.

[@shaskull]

@@ssvcustomtransfers yes ma’am can you do a video on the morning routine?

[@ssvcustomtransfers]

Will do

[@lindanelson9128]

So do I need to do this each time I'm done using my printer. What if I don't use my printer on a daily basis

[@lisarauch1027]

The cleaning carts are filled with cleaner?

[@zeimusic3473]

Really?

[@Romanelbeborosales]

That’s alot of work to be doing daily

[@gaylandthibodeaux9517]

Where do you purchas the cleaning carts and chipless software?

[@terrencetyler7242]

What type of printing you do, sub or dtf?

[@NSCsky]

Hey I’m doing a project for my uncle on converting that exact printer into DTF for him. I’m so sorry to bother you about because I could probably look it up myself. But could you possibly link me the cleaning fluid and swabs please?

[@ssvcustomtransfers]

ssvcustomtransfers.com/products/dtf-ink-film-powder-and-cleaner-direct-to-film?

[@brejocoop]

Where did you get the cartridge

[@arttocharmer]

do your cleaning cartridges need a chip?

[@ssvcustomtransfers]

No

[@Bonjour-World]

How often do you empty the printer's dirty diaper pail (maintenance box)?

[@ariellefiveysky7556]

Typically there is an external waste tank hooked up to it so you don't have to mess with replacement and chip resets (WIC)

[@rubenagurcia906]

where did you buy a single cartbridge for cleaning?

[@ssvcustomtransfers]

You have to buy a set. They aren't sold in singles.

[@yololin1837]

Could you post the link of cleaning solutions in video?

[@ssvcustomtransfers]

Vibrant Vibes Ink, Kingdom DTF or Printhead Hospital from Amazon

[@pilarp9mmm]

Do you have to have a CISS installed on the XP15000?

[@ssvcustomtransfers]

No. I ran carts.

[@jruth5005]

Where can I purchase the cleaning sponges

[@ssvcustomtransfers]

Amazon

[@erodriguex2k]

how long can you keep your inks in the cartridge? let's say you are a weekend printer. can you clean it and store the cartridges to use on weekend?

[@highgeared4959]

Im sure you figured this out by now, but if your properly maintain the printer just like the video, i bet you can leave it for a week. as long as you seal all the fill holes and bottom of the ink cart you can pretty much leave it for a few days.

[@erodriguex2k]

@@highgeared4959 ty

[@19sxfr]

How long have you been using the XP 15000 continuous for Sublimation? Hearing bad maint tasks.

[@ssvcustomtransfers]

I don't use for sublimation, I use for DTF. I used for over 6mths before I sold it.

[@janinlopez8825]

Would this be the same procedure if I’m using the OEM cartridges? Thanks in advance

[@ssvcustomtransfers]

Yes

[@janinlopez8825]

@@ssvcustomtransfers thank you

[@leothedog2023fan]

what would cause the black ink to get into the magenta cartridge?

[@highgeared4959]

that's very interesting. i'm not completely sure to be honest.

[@highgeared4959]

the black ink could have backfed through the print head into the magenta cartridge. that's my best guess

[@cuteako6845]

Can you we use maintenance carts without chips? And thank you for your tutorials :)

[@ssvcustomtransfers]

Yes if the chipless firmware is installed

[@danieldishman8611]

Do you have a video of the start of your print day?

[@ssvcustomtransfers]

kzbin.info/www/bejne/pYmzloN-q7uJqrs

[@jynclr]

What cleaning solution do you use? TIA

[@ssvcustomtransfers]

www.southernsassvinyl.com/products/dtf-ink-film-powder-and-cleaner-direct-to-film I use the concentrate. Directions say to mix 1:8 but I mix 1:10 for daily cleaning and 1:6 for heavy cleaning or to remove clogs.

[@jynclr]

@@ssvcustomtransfers thank you!

[@chippietom]

I can’t see what you are doing.. you need to re-site your recording device..

[@justinscott8119]

@JustinMajor-er2ko