Adam Drake from Mugen Seiki Racing talks about cleaning and servicing NMB bearings.

Adam Drake from Mugen Seiki Racing talks about cleaning and servicing NMB bearings.
amzn.to/2XmpiLP

[@seanhatch4425]

Wow I was blown away at the end when you spun the wheels. They just keep spinning and spinning for ever. Talk about perfect!

[@AdamDrake]

:)

[@eminstinct4114]

Agreed

[@bluegroovemodelsports9650]

Great tips. Good maintenance and race prep as always from Adam Drake....thanks for sharing

[@AdamDrake]

Thank you!

[@alexandre6940]

The end is terrific ! 😮

[@Duececutty6972]

Thanks Adam! Great videos for many years. Almost making me want to switch to Mugen because you provide so much great information. 😉

[@AdamDrake]

Very cool, let me know if you have any questions.

[@johnband3]

Thanks for sharing, incredibly helpful.

[@AdamDrake]

My pleasure!

[@agustinsegovia6523]

Thanks for the video! It helps a lot!

[@AdamDrake]

My pleasure!

[@gmax876]

The Legend! I'll be binge watching.

[@AdamDrake]

Thank you!

[@nardo2354]

👍👍wow they really roll. Great video!

[@AdamDrake]

Thank you!

[@kruzracing1692]

Heck yeah. I like doing this. Nice trick on the jewelry cleaner agitator!

[@AdamDrake]

amzn.to/2XmpiLP

[@Remcot3]

top !

[@skycorrigan6511]

That tiny US cleaner in awesome!

[@AdamDrake]

I love it!

[@shaneglover99]

Hi Adam, I just purchased one of your Jammin .21 on ebay for my Tmaxx 3.3, and was wondering since it was tuned by you if you could tell me what's the best plug and fuel used please bro. I am so excited to see what it will do. Any help would be so highly appreciated sir. Thank you

[@tlrcamp8009]

Would 0W-20 be good for rubber seal bearings instead of the tri-flo?

[@seanmccormack5888]

Adam question . Once you start on this regime with cleaning and light oiling of bearings do you need to clean and oil them right after use so they don’t seize up? I followed the same regime and raced on a track that was wet when we started. I didn’t get to cleaning the buggy until the next day and some of the wheel bearings had siezed. I managed to free them up as this was only one day but now I’m wondering if I used enough oil on them. Any ideas? Thank Sean NZ

[@AdamDrake]

Yes, it's not a bad idea to oil the bearings and pretty much any of the moving parts. After run oil is really important to have them last a long time especially if it's humid.

[@donaldhoneycutt3879]

Do you do this to all the bearings on the machine or just the wheel bearings? Thanks in advance and great videos man!!

[@AdamDrake]

I do it to all the bearings.

[@skaargan]

Hey Adam, I see almot all NMB bearings i found are metal shielded. Does the metal shielded bearing can hold up outdoor dusty track environment?

[@AdamDrake]

Yes, they still work great for outdoor racing and they're pretty easy to clean.

[@manaz28jose]

I'm digging that jewelry cleaner box. What brand is it, and where can I buy one? TIA Adam. 😎

[@AdamDrake]

amzn.to/2XmpiLP

[@vloneseraph]

do you use NMB's for every bearing in the car or just the wheel bearings? and do you clean and relube a brand new set?

[@AdamDrake]

All the 8x16x5's and 6x13x5's are NMB bearings. Not when they are new.

[@mastmec]

So you just use metal shielded bearings ? Do you use rubber sealed anywhere on the car ?

[@AdamDrake]

The inner hub bearings use a rubber seal, but the rest of the bearings I use have a metal shield.

[@slimjimmcsausage1279]

Between a metal shield or rubber, which of the two do you think have a better seal against dirt.? What are the pros and cons of rubber and metal ?

[@trentmarlowe7655]

Metal shielded = less friction Rubber shielded = better sealing

[@AdamDrake]

A rubber seal will seal better, but have more drag.

[@sith4mmer558]

Adam... where did you get that trick agitating box?

[@AdamDrake]

amzn.to/2XmpiLP

[@shaneglover99]

Can you give me a link to that bearing oil. Also can you give me a link to good Tmaxx bearings. I'm about to buy one of your .21 JPX Jammin engine for the Maxx so want it perfect

[@davidaarons2488]

Hey Adam, hope all is good with you. Can you get NMB bearings for other brands? God Bless Ya Dave

[@adamdrake8006]

The 8x16x5 and 5x10x4 NMB bearings will work with most 1/8th brands of vehicles.

[@j-1lokes294]

Adam were did you get your blue container cleaner..:

[@AdamDrake]

I don't remember, I've had it 10+ years. :) Here's a link to a similar one on Amazon. amzn.to/2FwX61o

[@HL-OOI]

Basically these bearings do not have grease inside right?

[@kruzracing1692]

Yeah, no grease. The grease would hold dust. Degreaser and brake cleaner would remove grease if it HAD any.

[@HL-OOI]

kruz racing169 so can I do this with rubber shield bearings? Remove the grease and then oil it..😁

[@kruzracing1692]

@@HL-OOI , yes you can. I know that most remove the rubber covers if using brake cleaner.

[@HL-OOI]

kruz racing169 thx bro..👍🏻

[@AdamDrake]

Yes, just a light oil.

[@BDcumminsdiesel]

Can you use gun oil on the bearings

[@AdamDrake]

I haven't tried that myself.

[@devil_samuraix6176]

full ceramic bearings cant be used?

[@AdamDrake]

You can

[@brandonsheldon4783]

What about bearing grease to thick?

[@AdamDrake]

Yes, I prefer the light oil.

[@billbarberconstructioninc.17]

@6:30 wow...

[@AdamDrake]

:)

[@zynaryzaidi7883]

Put the bearing in zippo oil. The shake them in a small glass bottle..try it!

[@AdamDrake]

Thanks! Like zippoo lighter fluid or is there a special oil?

[@zynaryzaidi7883]

Zippo lighter liquid thats it!..

[@AdamDrake]

Very interesting.

[@zynaryzaidi7883]

@@AdamDrake shake the bearing in zippo liquid with a small glass bottle, then u will see all the dirts come out. We also apllied it in mini tamiya 4x4 bearing..see the differences.

[@AdamDrake]

Very cool, thank you.

[@zynaryzaidi7883]

We use zippo oil.

[@AdamDrake]

Very nice.