E46 330i Burble and exhaust pops Tune

This is an M54B30 engine, with an M3 cluster.
Exhaust: Schmiedmann headers with race cats and Eisenmann race exhaust.
The car has a burble tune, pops and crackles which was installed for fun and to check out how it sounds.

[@philipcoin7484]

Nice tune I need this flash tune pls can you help 👍

[@betothebarber116]

Map for this burble and pops and bangs please ?

[@chrispy9736]

Good shit 🔥

[@dokterkarel]

makes it sound like someone ate taco bells and is farting in your exhaust

[@tamasfazekas6882]

Szia, olajhőfok simán működött vagy kellett valamit alakítani?? Látom hogy leírásban irtad hogy minden további nélkül müködik.

[@HPAddict]

Szia, egybol ment az olajhofok.

[@tamastakacs6947]

Szia. Nekem egy e46 323ci m van 1999 Ott is egy az egyben ki tudnám cserélni az óracsoportot M3 ra? Vagy azoknál ezzel is többet kellene matekozni. Köszönöm a tanácsod előre. Ui.: gyönyörű a hangja

[@HPAddict]

Szia, köszi. Maga az óracsoport simán megy egyből, futásteljesítményt kell kódolni az fix. Nálam a vízhő mutatót is át kellett skálázni kicsit.

[@956jt]

How did you get you’re car like this????

[@amggang8517]

What tune is this??

[@StimulatorCam]

Stihl MS 170

[@zyrafywchodzadoszafy3046]

pure

[@kissel7429]

how is normal driving with this tune, does it get annoying or does it pops a lot less when driving?

[@HPAddict]

xtasy sorfex I don’t drive it on the street, it is my drift car for track only

[@ProFsxVideos]

Having the same exact tune, it get's pretty bloody annoying and boring after a while. I just untuned my car back to stock maps... I prefer it that way.

[@HPAddict]

Mike Dart I have also removed the burble from the tune. So unnatural though

[@ProFsxVideos]

@@HPAddict Exactly... I prefer the "organic" burbles more than the artificial and rather forced POPSSSS BANGSS.

[@zerkagames3845]

​@@ProFsxVideos Can you tell me please how to make this mod? please, send me an email([e-mail]) or here, please!

[@richardgirus1719]

Hello! Érdeklődnék, hogy kinél programoztattad az autót?

[@HPAddict]

Szia, én csináltam, Tunerpro meg galletto.

[@klevo1593]

@@HPAddict Szia kérhetnék egy elérhetőséget esetleg? Lenne 1-2 kérdésem , ha nem gond! Pacsi✌🏽

[@lownslownx7880]

Nice cluster bro is it just plug and play?

[@HPAddict]

I had to modify the water temp reading but otherwise it was plug and play

[@lownslownx7880]

HP Addict planning on putting one on my 325ci what modifications did you have to do to it?

[@HPAddict]

@@lownslownx7880 it just plugs right in

[@lownslownx7880]

HP Addict I mean to the temperature? And can you make it read the oil pressure/temp like an M3?

[@vadymkolodkin1702]

How did you modified water temp readings?

[@balazshajdu8685]

Ezt megrudod nekem is irni? M54 van nekem is. Ha igen valami kontakt jol jonne.

[@HPAddict]

Sajnos csak N54-eket csinálok már.

[@lyshing1144]

How can get this for my E46 please 🙏

[@kilhoffpeter]

Most olvastam csak hogy hogyan 😊 m52b25 arra is meg lehet írni ?? 1997

[@HPAddict]

Kilhoff Peter hasonlot meg lehet irni, de ez csak m54-hez van ugyan igy. De barmelyik chippes megirja a durrogast

[@B5CT]

Where can I get this?!

[@ItzGomes96]

How do i get my car file to do this?

[@abdullahremaj1405]

How do u get the tune ? I don’t know how to get it

[@shahzeboy1609]

you have to go to a tuning shop to get it done

[@1importedguy]

RK Tunes sells it

[@erwinfelgendreher]

Can you make this Pops and Bangs on Stock Catalyst

[@ozan45]

probably not, would destroy them

[@silas.anderson]

@@ozan45 what if you wanted to destroy them ;) i got hatless headers but sadly they fit everywhere but the flange. so still on stock headers but i really don't care about my cats. i want to blow them out with a tune if its possible. i already know how to tune and everything and got some burbles but want them destroyed

[@MrWhiteboi604]

​@@silas.andersondelete secondary o2 sensor.

[@silas.anderson]

@@MrWhiteboi604 did that also. did tons of countinues round of anitlag with lots of extra fuel and no o2. did it for like 15 sec then 5-10 second brake intervals and they looked brand new when i took them out. now have hatless headers.

[@joelpoundari9687]

How to get this tune?

[@again8192]

Are these the cats that cage with the headers?

[@HPAddict]

Adrian Gainz yes they are!

[@kilhoffpeter]

Ez hogy program ? E39 525i -nél is meg lehet oldani ??

[@casianflorentinoros222]

igen lehed csak angolul fogom irni mert nem nagyon tudok magyarul, on the release of the gas pedal you program the car to retard the ignition from the spark makeing it to explode on the exhasut valve open :-D

[@drunknmonk12]

Your car sounds like it's shitting it's pants.

[@kekethetoad]

Cringe. So contrived. Doesn't sound genuine at all.

[@emersoncanales1155]

How do I get those pops and bangs ????

[@chrispy9736]

I stg I was on the freeway and my car started doing this as My car downshifted an I accelerated had my heart racing

[@lyshing1144]

Can you help me please

[@msck64x]

😍😍😍😍

[@luisnascar100]

Where did u get the tune, i want it

[@HPAddict]

luis diaz jr you can find it on ms43wiki for free

[@betothebarber116]

@@HPAddict exactly name for the map please ?

[@betothebarber116]

@@HPAddict ??

[@Meox_YT]

@@HPAddict please answer

[@Meox_YT]

@@betothebarber116 did you find it?

[@ejg1003]

Do you have to have catless downpipes ?

[@HPAddict]

E J G no but if you are catless, they are louder. But with excessive use you could probably do some damage to the cats.

[@ejg1003]

HP Addict where’s a good website to get after market cats ????

[@bkdetailing]

@@HPAddict i have e60 with m5430 with empy front catalyst converter...and others is stock..will pop n bangs sounds like this or 🤣

[@lafarkesil7107]

i think its a m3

[@HPAddict]

Just the cluster, the engine is an M54B30

[@lafarkesil7107]

That's interesting, thanks for telling me

[@maxblaze340]

Афигеть

[@SixSpeedSeven]

It’s not weird having a gauge cluster with a redline at 8K when your car only revs to 6500? Lmao

[@HPAddict]

it shows oil temp, that's all I needed. It was a drift car, I couldn't even look at rpm if I wanted to.

[@Robin-lh8ky]

@@HPAddict how did you get oil temp working?

[@HPAddict]

@@Robin-lh8ky you just plug it in and it works right away. coolant temp gauge needs to be readjusted though.

[@brandonnguyen1999]

Hp gains??? 😍

[@henrik1743]

lol hp gains? It will fuck up the engine quicker and you sound like a tool, that's all

[@brandonnguyen1999]

@@henrik1743 man shut the hell up, just asking, ignorant peasant…

[@henrik1743]

@@brandonnguyen1999 ignorant peasant lmfao, keep revving the crap out of your stock auto 330 cab bro, I am surprised you passed your driver license with that intelligence you got. Unless you revving mommys car that is

[@FlamingPurpleCat]

Lol that’s a 3.2l s54 engine though, not a 330😂

[@HPAddict]

alright, I love it that it is my car and everybody knows better, dude check my other drift videos, I even have one where I have the hood open. It is an m54b30 and has an m3 cluster.

[@FlamingPurpleCat]

Well cool modification then! But without clarifying that in the video you gotta expect comments like that. I literally never see people with changed out clusters lol don’t get offended when it blatantly looks like a m3

[@HPAddict]

FlamingPurpleCat the name of the video start by E46 330i and the first line in the description explains everything. How can I do more than that? Anyways, I only run the m3 cluster to monitor oil temps. It is a drift car.

[@FlamingPurpleCat]

Yea that’s my fault but I usually don’t read descriptions on KZbin lol how hard was it to change the cluster?! There’s a lot of m3 being parted out where I live would be a sweet feature!

[@HPAddict]

FlamingPurpleCat it plugs right in, I didn’t bother with coding the vin and all that, but I did change the hex file for water temp scaling because it wasn’t in in the middle at operational temp.

[@jelaniperry1896]

First off it's an m3 not 330ci

[@HPAddict]

Jelani Perry first off it’ an m3 cluster in a 330i

[@Lazysmackz]

@@HPAddict 🤣🤣🤣

[@GamerNRetro]

Sounds horrible. Why is this a trend?