CyberPower PC, GPU not detected - LFC

[@mikelukasik9996]

I owned my own Electronic shop for 20 years in Canada and have been in the repair business for total of 54 year. That was a great repair and shows your dedication to the customer, thank you for putting this video online. Michael

[@procta2343]

I think skills like this is a dying art now.

[@ThisOLmaan]

@@procta2343 : but still very much need it

[@gogee8510]

This is why I love this channel. That was a masterclass. Satisfying.

[@felixlersha]

Going above and beyond as is standard operating procedure for Adamant IT I've noticed. You're local customers are so lucky to have you and many of them probably don't even know it. Most computer stores would at best diagnose a motherboard fault and then just toss out the existing board. They would then perhaps upsell the customer on a more expensive replacement part with a decent markup, plus probably charge more labor than you did in actually repairing the board. So yay to no needless e-waste and another bravo job sir!

[@martin_green]

Fantastic breakdown of how to diagnose, never assuming or defaulting, and then repairing a desktop pc. Maximum respect.

[@scottouellette5354]

Hell of a find. Thanks for taking us along on that journey.

[@Oregonian1]

IMHO this was one of your all-time best videos. You were able to diagnose a very unusual and tricky problem while bringing us along for the ride. I really enjoy troubleshooting videos in general and this was a great one. Please keep up the excellent work!

[@Fatblokeonamoped]

47:52 - That "Hallelujah!" moment when you know you've found it. A lesson in methodical diagnosis. Top man!

[@loman0071]

Absolutely amazing find and fix. Love it when you post gems Like this. 👍

[@chrisverhulst5476]

Can i give you 5 tumbs up Gragam? One seems not enough for this video. Oh i have to answer under a post, i cant post on my own.

[@silas184]

Well done Graham, good diagnostics, thoroughness in checking the board paid off, most repair shops would have given up and sold a new motherboard. Hope your customer appreciates it, but at least you had a really interesting repair video out of it!!

[@procta2343]

i think this sort of repair work now, is getting very thin on the ground. Too many shops just want to the quick swop and away, rather than use skills on repairing, like people used to do. I fixed my PC speakers, with a soldering iron. That was thanks to Markus Fuller, who did electronic repairs, so a quick look at two mins if that with the iron and good as new.

[@yumri4]

Though after he found out it is a chip on the motherboard not any other part that is the problem unless he offers logic board repair services which he does. As most don't and only do part replacement not chip repair they would replace the part that they found to be faulty.

[@DJIInLondon]

Times money mate. A board is cheaper than the diagnosis cost

[@yumri4]

@@DJIInLondon As he seems used to finding the place the error is made it was quick. As most logic board repairs use cheap chips or no chip in this instance it really depends on how quick are the employee at finding the error and how expensive is the board for which one is objectively cheaper after all costs are accounted for. You still have to go through the majority of what he did to find the part that needs replacing as blindly going through a list will take more time then to do simple diagnosis like he did to get to it is a motherboard issue.

[@marianmarkovic5881]

@@procta2343 Well it depends, if it was in warranty, i would recomend use it before soldering...

[@davidmunro5577]

Intermittent dry joints were the bane of my life for almost 40 years of electronic repairs so I am pleased to see I was not the only one. I used to suspect dry joints early in a diagnosis as it was usually easy to fix them. Well done to spot them.

[@andrewquinn5946]

Can’t beat a lunchtime adamant IT upload

[@dennisgriffin1874]

I'm not a computer Geek, but I love watching your videos. You're amazing, love to watch your diagnostics, methodical approach, which goes a long way towards explaining why you're so competent & successful in your career. Congrats!! I look forward to your next video.

[@josephmeholick1300]

i do believe the aio cooler heatsink is oriented in the non recommended way could get air stuck in the pipe.

[@AutodidactEngineer]

@@josephmeholick1300There is always that one guy who thinks like you. For the 10.000th time it doesn't matter, if there is an air pocket stuck in the pump housing he can just rock the case back and fourth until it has moved to the radiator.

[@terminusaquo1980]

@@AutodidactEngineer Well this is in ideal position is one where the pump is the lowest point in the loop but as you say it doesn't matter, it this case you would hear gurgling but nothing more than that. The only thing I will say is that as the coolant levels get lower then you'll get more air working its way into the pump which can damage the pump, some AIOs have fill ports though so you can always top them up. I mounted my AIO in the top of the case which is the best place as you'll always get coolant flowing through the loop, but again as you said, it doesn't matter.

[@drsmith3411]

Your commentary as you continued on with your repair was very entertaining, worth continuing, and amusing. Carry on, well done!

[@astrodogdog]

You should be proud of your work here mate. You're the kind of skilled repairman everyone wishes for.

[@TheGameBench]

One of the most satisfying repair vids I've seen in a while. The only bummer is that the owner will never really understand what you did. Most repair shops would have just stopped looking as soon it worked in another slot.

[@davidlaw2260]

Tons of electronic repair videos on here but this one really was most enjoyable to watch. When you nudged those pins and found them loose, that's what it's all about. Looked like the whole of that end of the socket hadn't been pushed down before soldering at the factory Great stuff!

[@douglasdippold8235]

I can say with a fair bit of confidence that the misaligned i/o plate and the broken solder joints have the same cause. When the expanding packing inflated, it pushed down on the gpu hard enough to not only bend the motherboard, causing the already substandard solder joints to fail, but it also bent the motherboard tray of the case.

[@ve4edj]

Yep I was screaming this at the screen the entire time. Too much pressure from the expanding foam

[@williamjones4483]

@@ve4edj Right from the beginning that motherboard was screaming for attention. There are literally hundreds of copper traces on the bottom of the board that could have been shorting out. If this had been my repair I would have gone for that mobo first. Amateur Radio much? N4RGQ

[@jaro6985]

@@williamjones4483 Traces on the bottom of the board won't short to anything with 6mm standoffs. Sounds like you have no clue.

[@andypandy7461]

My thoughts too 👍 still a good watch tho

[@incandescentwithrage]

"Already substandard"?

[@Sorest2]

That was really interesting. Loved how you patiently narrowed it down to some loose joints that also would explain the intermittent fault dynamic. Love this.

[@KC-nd7nt]

Fantastic work brother . Love to see you work it through . I had a similar issue that only appeared when PC was standing up on feet but once I tilted the case on its side , The problem went away .

[@DaleLadDaz]

amazing to see you follow the traces and just kinda figure out the schematics...that stuff blows my mind...great repair and excellent to see a professional share their step by step approach and thought process...

[@tiemenvanderbijl785]

I so very much appreciate you actually looking to FIX things. instead of replacing faulty parts. you replace faulty parts of parts. I'm sure its more work but I do enjoy the whole "not throwing it away" thing. Well done

[@theoldbigmoose]

The joy of finding the problem at 48:00 !!! Those heavy graphics cards need more physical support IMO.

[@DaboInk84]

Amongst your viewers, I’m sure that I am not alone in stating I enjoy your longer videos more as there is always more interesting trouble shooting. Great upload!

[@techluvin7691]

I build gaming systems and I am totally impressed by your troubleshooting skills. Methodical….on point…..and your soldering skills are far better than mine.

[@Jason-jk3tn]

Wow I love how you went above and beyond for the customer with the fixes at the end! Nice diagnosis and repair.

[@biotrekker]

That was a great example of honing down on the possible problems until you find the source. Makes sends that the problem was intermittent, given the fault. Very enjoyable. Cheers!

[@metrotechguru5863]

Brilliant job, Graham. Well covered with all of the appropriate camera shots. Very enjoyable to watch.

[@duncanny5848]

Loved this vid. Wonderful to see you find such an unusual fault, but even better that you worked out the fix, did it, proved it and we all learned something. Respects

[@sldkjh]

The NVME is maybe connected to the chipset in stead of the CPU. There are two slots closer to the CPU that probably connect to the CPU more directly. I see you fixed it at 55:00, good job.

[@fredscratchet1355]

That was an amazing video. One of the best. Your detective work is super impressive and I'm sure you will have one very happy customer.

[@AcheForWake]

As others have said, this video goes down as one of your best. Great commentary, logical diagnostic process and following through with the fix. Good to see the “Solid” test on the pins gave up the manufacturing fault.

[@_kicaBo_]

In fact, this may be the best channel for repairs, versatile type. The content is getting better and better and there is a lot to learn. Best,

[@Faith.in.His.Grace.]

Brilliant! That is some next level pc repair, anyone else would have scrapped that MB. You not only did a brilliant job but you also saved the customer some money and we all learned something too.

[@Glenn_Wackett]

Your conclusion at the end was perfect for me, particularly if the PC was still new as it is so much less hassle to just get the motherboard replaced. Big kudos for finding and fixing the fault too. Loving the video's, Graham. Keep up the great work!

[@kc_zeppelin]

prefect example of the passion for electronics.. Great Job!

[@bigmotter001]

Fantastic diagnosis and repair! Basic steps to diagnose today's electronic problems are too often bbeing overlooked or skipped for the all mighty buck. Thanks for taking us along and take care!

[@gerrybvr]

That eureka moment is the happiest I've seen you for a long time Graham. Nice one 👍

[@MrWonderstuff]

Epic stuff. Nice to see you actually repair it as opposed to just saying - "yup need new motherboard" - I was following you until you got to the capacitors. Whilst a little over my head I got to understand what was going on due to your clear explanation.

[@rossgee2950]

Nice! It is so much fun to ride along with you as you step through your diagnostic process. That was a brilliant bit of sleuthing. I can honestly say, as a Ph.D. biochemist, I am humbled by your analytical skills.

[@DJaquithFL]

Excellent find, repair and riveting video. The customer should be thrilled with your work! 👍😎👍

[@bigtom1948]

Very good diagnostic and even a MoBo repair with tools at hand. Respect earned and freely given. I hope the customer was happy with the repair and the drive repositioning plus the proper PSU utilization for the load requirements of the 3080.

[@Syntax.error.]

Great fix! Your customers are lucky to have you around. You went above and beyond to get a good and cheap fix. I think most shops would just sell another motherboard and call it a day.

[@MiettedeThonTomate]

Impressionnantes compétences et savoir faire. Fente de GPU, entretoises de carte-mère, cablâge d'alimentation GPU et repositionnement correct de SSD, une réparation 4 en 1. Bravo ! Impressive skills and knowledge. GPU slot, motherboard standoffs, GPU power wiring and correct SSD repositioning, a 4 in 1 repair. Bravo!

[@rufiorufioo]

Probably my favorite video I've seen you do. This video nearly has it all. The weight of that 3080 absolutely cracked those joints on the PCI slot. When you stand the case up that card will for sure sag. Should have a support bracket from factory with the card.

[@fusi0nn]

Crazy what a simple fix it was. I know that had the customer sent the PC back to Cyberpower, they would've DOAed the board and sent it back to MSI who probably would have stripped it for parts and called it a day, but a simple solder reflow due to PCIe 16x slots not being designed to take the weight of how massive GPUs have become is amazing and probably something you've learned overtime. Top notch work and you got a sub from me!

[@megabitestradings]

The most satisfying repair, well done Graham 👍

[@Capt.Marco-Hawk-L.L.A.P]

awesome work, loved how you diagnosed the problem and came up with a fix

[@nicholasbooth1065]

Best video yet. from start to finish, a great overview of diagnostically understanding an issue leading you to the fault. An enjoyable hour of viewing

[@fabian11235]

Great video, solid diagnostics and an interesting fault. Also no idea what you charge but all the little attention to detail like using the two 8 pins, moving the nvme ssd and of course actually fixing the mobo instead of swapping it that's some top notch costumer service man. You really are an independent PC repair shop poster child m8.

[@scottwojcik2148]

Yes another LFC video. Absolutely love watching this channel and the diagnosis process. Started watching the Twitch channel too which is great. Many thanks for the videos and streams.

[@colinreece3452]

When you tried that other GPU and it posted I bet some PC shops would say it was the original GPU and say that was it maybe even try and sell them another. you looked further mate and found and fixed the fault, great work Graham as usual, top man.

[@donaldkuchlersr8776]

Loved watching that repair. Brought back good memories of older times. Congrats on repair.

[@OzzyMetalypsy]

This was a great watch, Thank You very much for sharing this! I learned something new.

[@craighillyard5464]

great seeing a repair rather than a replace , great job

[@charlesm.1638]

Amazing job. I think other electronics shops would have most likely just returned it to the customer and told them it was unfixable. Glad you dug deeper because it sounded like you were going to recommend replacing the motherboard.

[@somewaresim]

Well done Graham. Amazing piece of troubleshooting and repair.

[@viniciusvbf22]

I loved your diagnostic process on this one! All the steps were very logical and concise. Loved it, well done!!!

[@markvvelsen]

Very unexpected... My first guess was a BIOS setting for the PCIEX Gen 3-4-5 that I've seen before but this is much more interesting and congrats for finding and resolving the issue. Let's me rethink and check my incoming faulted PC's just a little deeper now.

[@EpRoos]

When it turned on accidently once on the slot I suspected there might be a power issue. First I thought the power supply which couldn't give enough. But the old obsolete card didn't start at all so that mainly said enough.

[@1966babysnakes]

Absolutely "Pharkin'" Brilliant! You didn't give up & got it sortted.

[@twebit]

That was interesting... I cheered! When you found the fault... excellent job

[@methedutch9647]

At first I thought, just fix the motherboard and be done with it. But I stayed patient, watching the entire video and glad that I did. You are very meticulous in your troubleshooting, and I learned a few tricks because of what you showed. Thank you, you got a new subscriber and I look forward to watching your future videos.

[@Nachesko]

This is the best repairs channel on youtube, great analysis and find

[@lesabre1972]

No, a lucky find would be if I found it. I learn a lot from you man you do an excellent job thank you.

[@infinitejest1471]

Great video - loved the methodical approach and the absolutely glorious moment when you find the fault - top stuff Graham.

[@Stefan-mz5bz]

What a fantastic find! Really thought that it might be a faulty PCI-E since two different graphics card worked just fine in the secondary port/RTX worked on the test motherboard, but it really got me confused on why did it manage to post when the GTX was firstly installed. Keep up the good work!

[@markroberts7093]

Thoroughly enjoyable video. Great diagnostics and glad to see you got it up and running.

[@Ottonic6]

What a great video. Once you found out it was the power to the GPU, I thought right a way there was a broken solder joint on the slot. Not knowing what you do, I would have checked the slot first for bad pin connection. Great job!

[@MrPnew1]

28:03 I have no confidence in this motherboard!!!! Good job Graham, nice deductive reasoning leading to a well deserved fix.

[@shastrichandoo817]

Fantastic video!!! Love your methodology once again. I must say that watching your videos has given me the confidence to transform the way I approach my repairs to a even higher level. Take a bow and keep up the excellent work...respect and regards.

[@mrpoki9]

well i have to say, that was a really awesome video- finding that peculier fault must have been amazing. mad respect tho for sticking with it for so long.

[@speedbird8326]

This was excellent fault finding, reasoning and the repair was great.

[@DanielsGameVault]

Had a fairly similar incident with my old Asus P5Q Premium: I messed up and touched a 3.3v wire from the PSU's ATX connector to a 12v line (don't ask how, but it happened - NVM). The PSU immediately shut off but the bastard wouldn't POST anymore. Both of the 16x Pci-e slots died because of this: the GPU would only get detected in the 4x slots, so that jolt of 12v probably killed a data line on the NB...

[@mwarnes389]

Brilliant that facial expression when you've cracked it,i know that feeling great content thanks again 😀

[@dougler500]

Phenomenal find! You deserve every bloody penny from that fix.

[@ticklesmcqueen2702]

Great video. nice to see thorough testing and problem solving, subbed for more content

[@typicalthrill]

Very cool! Glad you didn't give up on it!

[@mikeburch2998]

That was a really nice fix. Well done to say the least. It wasn't lucky, it was methodical and clear thinking. Greetings from Arizona.

[@mustangk62]

Love to see the "happy look" when you discover/succeed!

[@TechReviews2010]

well done mate, good save for the customer.

[@kevvyg04]

Brilliance through perseverance, its a fantastic feeling once you’ve found the problem, happy days mate !!

[@RACViking]

Very instructive, and exciting as well. Good points made about the parts choice too. So well done, as always!

[@WackyT08]

Adam, that was a great repair! Learned a lot about PCI-E slots. Thanks!

[@chrismcdonnell7448]

Good job on this repair! I definately learned something here. Thank you for all you do!

[@JeffPomaybo]

This one was a good one. I para-socially felt that satisfaction from here. Great work.

[@monkeytutz2]

That’s excellent work Graham. You saved the customer the expense of a new motherboard with some old school board level fault finding. I bet it felt ace when you spotted those wobbly pins 👍

[@bmck9097]

very, very professional diagnosis, thank you for doing this for us.

[@rpgmaniac420]

I loved this one! Normally I would have replaced the motherboard as well but you have shown me sometimes its worth diving in to see if its salvagable. keep these coming!

[@IFRSKIES]

Wow that was entertaining. Well done. Just great service Adamant IT.

[@martinkroutil]

This one was a good one. I really enjoyed listening to you analyzing proces. Good work.

[@petartomic9783]

Long time follower. This one was one of the best repairs. Very nice.

[@personalPickle]

One of your best videos! well done, great analysis

[@erickgruis106]

Super legit repair and I love your channel!

[@someguy9466]

That's the kind of work that earns you the title expert. Nice job. Thanks for posting another great video.

[@bramvandenbroeck5060]

Great fix and what an adventure! Amazing!

[@geraldh.8047]

Wow. Amazing Troubleshooting and fixing skills. Hats off to you.

[@yellownev]

Well done, real focus and skill and one less MB to landfill - top man.

[@josejunca3559]

What a great video...very complete diagnostics down to the electronics level. Thanks for sharing.

[@EXOWill]

Excellent repair. I've been building gaming systems since 1997 and have never run across this problem. With graphics cards getting heavier, it presents a problem for shipping. For shipping I take the extra effort to secure the cards so no amount of jarring will disturb the internals.

[@alexthetech1305]

Really great video. I don’t get to work on many computers any more but I think the old me would have just rma’d the mobo. I really liked your diagnosis process. Saved the customer a lot of time and money. Keep up the good work.

[@AhmadAsou]

awesome mate, that's the best diagnostics and fix i've seen, and i've seen so much