Great tutorial as always! Tips(in case you don't know): Hold down Alt + click and drag to select object regardless of your cursor is pointing on another object, surface, etc...
@AdamArchh2 жыл бұрын
Thank you.
@AdamArchh Жыл бұрын
Thank you. What second are you talking about?
@fabriceten38782 жыл бұрын
Great job buddy, keep it up. You could make a video explaining how you did the render and what programs you use.
@AdamArchh2 жыл бұрын
Thank you. Fabrice, Soon
@nasserahmad46532 жыл бұрын
Great tutorial as always,well done
@AdamArchh2 жыл бұрын
Thank you Nasser.
@sayedfazlahmadsadat31152 жыл бұрын
Excellent work ❤️
@AdamArchh2 жыл бұрын
Thank you.
@ZAKarchitects2 жыл бұрын
Amazing
@AdamArchh2 жыл бұрын
Thank you
@anandsankar78742 жыл бұрын
Thank you
@AdamArchh2 жыл бұрын
Thank you too.
@plutoicxe98842 жыл бұрын
Great!!!!!!
@AdamArchh2 жыл бұрын
Thank you.
@umutt80532 жыл бұрын
Nice work
@AhmedMacowAhmedMacow3 ай бұрын
Legend
@discoverourpurereligion37012 жыл бұрын
😯😯😯😯😍😍😍😍😍😍
@guestmi32 жыл бұрын
We wanna hear your voice dude
@AdamArchh2 жыл бұрын
Thank you Jim, but my English is not good.
@ericlee_gf2 жыл бұрын
Like your voice
@AdamArchh2 жыл бұрын
Thank you
@muhammadchowdhury13402 жыл бұрын
Great video can I ask do you use maya in your workflow at all thanks
@AdamArchh2 жыл бұрын
Thank you Muhammad but I don’t use Maya.
@DavidRamosarq2 жыл бұрын
where i find subd tools tab in rhino 6
@AdamArchh2 жыл бұрын
Subd only for Rhino 7.
@zeynepdereli28012 жыл бұрын
Congratulations , very nice work 👌
@imanefdiliya9068 Жыл бұрын
Just finished the modeling, took me few days was doing about an 1/2hours a day with 0.5x speed. Learnt a lot from this tutorial will be very helpful for my final year of architecture degree. Thanks alot
@The-Celestial7 ай бұрын
Yes samee, will be very helpful for my final year thesis project 🙌
@qelsnitch2 жыл бұрын
Love your tuts. But want to learn how you superimposed your renders to a world photo please.
@AdamArchh2 жыл бұрын
The render is not for me. I got the image from Archdaily. However, I will be making Render videos soon.
@alirafaat17522 жыл бұрын
you are amazing, keep it up
@AdamArchh2 жыл бұрын
Thank you
@ebuka_idafum_designs2 жыл бұрын
Thanks Adem, I will try this one too
@AdamArchh2 жыл бұрын
Thank you too. Good luck.
@AUTOGARAGERIM-CARS2 жыл бұрын
nice work please reload the 3d model
@AdamArchh2 жыл бұрын
Thank you. Ok
@AdamArchh2 жыл бұрын
Try download again.
@AUTOGARAGERIM-CARS2 жыл бұрын
@@AdamArchh thanks
@luisfe71872 жыл бұрын
How can you make the sections and 2d floor plans from this 3d model
@AdamArchh2 жыл бұрын
Instead of pressing the object, keep it pressed to frame it.
@luisfe71872 жыл бұрын
@@AdamArchh can you consider tutorial of the ramps of the proyect edificio de estacionamientos en grenoble by poisay architectes the proyect is on archdaily please
@tewodros65972 жыл бұрын
Love your tutorials, but how long it takes to master Rhino?
@AdamArchh2 жыл бұрын
I guess it will take less than 1 year.
@alessandrogrossofacchinetti2 жыл бұрын
Those are some beautiful renders at the end, could you please make a tutorial only for them?
@AdamArchh2 жыл бұрын
I just modeled. The render is not mine.
@umutt80532 жыл бұрын
Good
@AdamArchh2 жыл бұрын
Thank you
@germanbodenbender68992 жыл бұрын
Excellent video!
@AdamArchh2 жыл бұрын
Thank you
@art_forever_322 жыл бұрын
Great work!
@AdamArchh2 жыл бұрын
Thank you Emin.
@tranquilohomie22482 жыл бұрын
is rhino better than sketchup rn?
@AdamArchh2 жыл бұрын
We don't know this. But we love Rhino
@aminemin3426 Жыл бұрын
Definitely better!
@elmanefendiyev298610 ай бұрын
Tell me what material can be used for this complex solution?
@alejandrojimenezrestrepo93779 ай бұрын
me perdí apenas pasados 2 minutos, pero volveré por ti, cuando este al level de esto
@studio_20x302 жыл бұрын
Hello, I'm having problem with the tween curves tool in 12:53 .....i did the same thing but all i am getting are curves outside of shape.
@AdamArchh2 жыл бұрын
Hi, can't you do the Tween Curve command?
@studio_20x302 жыл бұрын
@@AdamArchh i learned it but it was not doing like you did then i exploded the curves and did tweencurves and worked! Would love it if you showed us a tutorial of a building modelling from exterior and also interior floors and windows and doors....i am new to rhino and basically am learning from you! thank you so much
@AdamArchh2 жыл бұрын
Thank you. Ok I will do soon.
@moonbiillust Жыл бұрын
Im having the same problem too , when i do the tween curve it just form out of shape .. how do i fix this ?
@blindedinchains27 Жыл бұрын
holy fuck man, nice finding you!!!
@mitratahmasbifar91612 жыл бұрын
کاش زیرنویس داشت چقدخوب بود
@dakadarek7771 Жыл бұрын
The part when i create the window, i can't split them like u (i mean i can't choose a full poly surface like u, they're split into 2 parts) Do u know how to fix it?
@aminemin3426 Жыл бұрын
Merge srf , if it doesn't work "Srf seam" command
@rizayevshokhjakhon2 жыл бұрын
So good
@AdamArchh2 жыл бұрын
Thank you
@umut23752 жыл бұрын
Perfect
@forarchitecturaldesign4722 жыл бұрын
1:58 why i can't select only the array line instead of select all line inside the second circle? by Shfit + ctrl selection
@AdamArchh2 жыл бұрын
In wireframe mode while holding down ctrl shift. select them without pressing the edges by enclosing them in a window.
@forarchitecturaldesign4722 жыл бұрын
@@AdamArchh thx for the quick reply, i try the wireframe mode selection but instead of line I also selected the face automatically.
@AdamArchh2 жыл бұрын
That's what happened when I was doing it too. Make the selection a little closer to the center. or switch to shaded mode and wipe surfaces one by one
@forarchitecturaldesign4722 жыл бұрын
@@AdamArchh thxxx! I learn a lot
@iftikharmalik639 Жыл бұрын
I love you❤ dude
@selimahmed22302 жыл бұрын
I Love You 😄😄😍😍
@gont1553 Жыл бұрын
Great
@fatmaelshazly8362 Жыл бұрын
wow 💚
@bravelittletoaster34392 жыл бұрын
Okay but how do you make a window when the top and bottom are not symmetrical and at an angle?
@AdamArchh2 жыл бұрын
If it weren't symmetrical, we would've gotten over that too. Nothing is impossible on this channel.
@filipecruz2472 Жыл бұрын
hello friend, do you have a rhino course?
@AdamArchh Жыл бұрын
Hi, We don’t have a course.
@binhphantranhai50892 жыл бұрын
Great Vids for me as a student. Its help alots. Btw how can you osnap or choose "projected Quad" as I can only choose "quad"
@AdamArchh2 жыл бұрын
Sorry I can't understand you. But we will definitely have a follower who can answer you.
@haibinh56782 жыл бұрын
@@AdamArchh oh sorry let me describe more in details, when you draw a line or polyline, you hover the mouse near edges of a surface where it appear something like "near, quad, int, perp,..." my concern is in your vid you have like"projected quad, projected perp,..." like it coordinates along that surface. How can you do that ?
@AdamArchh2 жыл бұрын
I think the problem you are having is related to the project command. In the lower middle part of the screen, there is the Project command. use it.
@sakibulhasan14152 жыл бұрын
Amazing!
@AdamArchh2 жыл бұрын
Thank you
@moonbiillust Жыл бұрын
Hey i want to ask. in 5:43 your rendered background is black , how i can change it like that ?
@moonbiillust Жыл бұрын
Also in 11:34 i can't create loft , i already select both curve but nothing happened
@moonbiillust Жыл бұрын
Alos on 13:41 , i can only delete the bottom part .. how do i fix this ?
@aminemin3426 Жыл бұрын
@@moonbiillustyou select the curves after you use loft command . Or you can just type loft and then select curves one by one .
@noemihenrytorres91492 жыл бұрын
Hello Adam, hope you are well, when i select the lines from the outer part in wireframe mode and top view with ctrl+shift, i do select as well the faces. Is there any presettings i should know? thanks for your videos ;)
@AdamArchh2 жыл бұрын
Hi thanks. You may be missing a small detail. Create the selection window from left to right, not right to left.
@AdamArchh2 жыл бұрын
Can you send me a video from instagram DM?
@noemihenrytorres91492 жыл бұрын
@@AdamArchh thanks a lot for your quick answer. Look min. 5, you do right to left and just select edges. however thanks for all ;)
@AdamArchh2 жыл бұрын
@@noemihenrytorres9149 Okay, let's choose a different method. Open the Filter menu at the bottom of the screen and select Edges only. So it doesn't select faces.
@noemihenrytorres91492 жыл бұрын
Thansk for your support, yes, changing filter works, i'm quite new in Rhino. by the way, when i try to stich vertices (min. 8.30), it appears "Defects are marked with dots and defective components are selected". i looked on the internet, but i don't find the way..
@shaw62082 жыл бұрын
Amazing modeling and rendering.
@AdamArchh2 жыл бұрын
Thank you. Designed and rendered by Of.Studio
@asifpatel49192 жыл бұрын
Amazing work I think v ray plugins use for lighting