How to Stack Multiboard Prints in Bambu Slicer PLA with PETG

  Рет қаралды 5,708

Mr.Exo3D

Mr.Exo3D

Күн бұрын

Пікірлер: 16
@MrBoowashere
@MrBoowashere Ай бұрын
Nice. Never thought about doing that. Great video.
@pirobot668beta
@pirobot668beta 6 күн бұрын
I've been using TPU as a first layer, PETG above that. Nearly impossible to separate TPU from PETG. My Vase-mode prints now have a 'bumper' on their base...non-skid and all that. Printed on a holographic build plate, black TPU makes a near perfect copy of the embossing.
@frankcarlsen4921
@frankcarlsen4921 19 күн бұрын
That is a very neat trick. Thanks for sharing.
@MrCheddah13
@MrCheddah13 Ай бұрын
Man this is amazing! I have some rather simple parts that are just barely too big to fit two on one plate so I am going to try this soon! Great Video!
@crazyethanyeahyeah
@crazyethanyeahyeah 20 күн бұрын
Thanks for sharing the informative video. I was wondering if this would work with other slicers and machines like PrusaSlicer?
@MrExo_3D
@MrExo_3D 20 күн бұрын
Bambu Studio is basically PrusaSlicer. they are based on same code base. so should work fine. havent tried others.
@mongoro
@mongoro Ай бұрын
How much did you use for flushing amount? I've found that I have to max it to 800 to be sure there is no weak points from contamination.
@mwinner101
@mwinner101 19 күн бұрын
Awesome! Great tip.
@DyoGTS
@DyoGTS Ай бұрын
I just stack them 0.2mm (or whatever you normally use for you Top Z distance) and print them without a support layer and pull them apart without any issues and zero cleanup. Never had any problems with reliability
@MrExo_3D
@MrExo_3D 29 күн бұрын
I tried that a few times too. But had more issues then success
@Alex-yu3ik
@Alex-yu3ik 24 күн бұрын
For those having trouble / just cannot get the supports to show: Instead of doing the settings on "Global" use the settings for the merged "Objects". Worked for me
@willemselten
@willemselten Ай бұрын
But why don’t you print the second part just completely with petg? Then there would be nothing to throw away. If you need to print pla I understand. If it makes no difference then you could print the parts pla, petg varied.
@trappedinroom1014
@trappedinroom1014 22 күн бұрын
Oooo…great idea with zero waste! Love it! We’re new to 3D printing (we’ve got a Bambu lab) so we have a long list of things we’d like to print, so being able to stack them and leave it printing lots of matching plates in one go seems like a game changer (or an awesome efficiency hack). 🙂👍🏻💕
@EricLS
@EricLS Ай бұрын
Feel like inverting the materials is the way to go. I'm new to 3D printing, but I am surprised multiboard recommends PLA when everything ever says use PETG for structural stability
@drewbeirn7704
@drewbeirn7704 17 күн бұрын
I say, use the right plastic for the right application. There is a whole world of different plastics and blends of plastics that have their own unique properties and applications. There are lots of videos out there that can point out the pros and cons of each polymer. As well as good applications for them.
@HughMessenger
@HughMessenger 15 күн бұрын
PETG isn't really "stronger" than PLA, rather it has different qualities that suit some use cases. It is more flexible and impact resistant, but that isn't necessarily what you want for Multiboards, where PLA's stiffness is often better suited. PETG can also be more finicky for dimensional accuracy and shrinkage, which can be an issue for interconnecting parts with tight tolerances. That said, PLA can sag and deform under constant high load, especially in hot ambient temps, so if you plan to hang heavy items in a hot location, PETG might be better. Bottom line, if you are just hanging light stuff in climate controlled space, PLA works great, and is easier and quicker to print.
3D Printed Bambu Spool Tool
23:59
Functional Print Friday
Рет қаралды 105 М.
Bambu Studio | Print More Efficiently Using Print Sequencing
15:57
SLIDE #shortssprintbrasil
0:31
Natan por Aí
Рет қаралды 49 МЛН
УНО Реверс в Амонг Ас : игра на выбывание
0:19
Фани Хани
Рет қаралды 1,3 МЛН
X1Plus Expander adds custom hardware support to the Bambu Lab X1C
15:38
Can't get your prints to stick?  Try this
9:54
Clough42
Рет қаралды 115 М.
Mulitboard + Neo + Multiboard + Frustration
16:28
Doug Does Stuff!
Рет қаралды 3,7 М.
Measure Existing Threads to 3D Print a New Cap/Lid
26:03
Shop Therapy
Рет қаралды 35 М.
5 MUST Have 3D Printed Tools!
11:45
Peter Brown
Рет қаралды 127 М.
Multipoint Learning Pack : Getting Started With Multipoint
22:49
Must Have Tools For 3D Printing
9:35
Arne Bornheim
Рет қаралды 97 М.
Try these filament combinations for Multi-Material and Supports!
13:37
Made with Layers (Thomas Sanladerer)
Рет қаралды 73 М.
Rhino 3D Introduction for Architects - Full Course (2023 Update) - Part 1
3:28:51
I Tested PPA-CF Filament and It's INSANELY Strong!
18:39
Clough42
Рет қаралды 156 М.
SLIDE #shortssprintbrasil
0:31
Natan por Aí
Рет қаралды 49 МЛН