Adams graphene ceramic coating Review ( The Truth)

[@jasonzammit3965]

Not sure what you did but I applied this to my car and let it sit for 3-4 minutes in 20c temp and have no stripes, streaks or high spots and that was with their advanced coating. Levelled very easily, I am calling application error here.

[@jaykrausbcful]

I have applied to dozens of vehicles without any hickup. Great product! I hope you prepped and applied/leveled properly.

[@daltoncodd5733]

I think your putting it on damaged wrecked paint with lots of contamination and asking to much for it to be a just wipe on and wipe off with no preparation if thats what you are looking for try a sealant like turtle wax seal and shine very good protection and very easy to use real dont need to prep but of course it would work better if you do good luck

[@gotturbo100]

If you don't know about ceramic coating, You don't do it.

[@redbaron2448]

Oh I know about it others works great Adams sucks ,you'll see 1000%

[@gotturbo100]

@@redbaron2448 well i do install the adams advanced. So the «hardest » version of the adam’s. It true that are a bit more chalenging when it your first time. But after you understand they way it work… it is easy. So my think about what happening that could help you. Do smaller section like 1sqf. Understand the quantity you put, the time for dry, and the way to wipe it very important to use 2 differents towel.

[@redbaron2448]

@@gotturbo100 I know all this this is not my first time with Ceramic coating. KZbin Adam ceramic coating why you get streaks why you get water spots he even knows this happened that's why he made a video on it. KZbin it

[@redbaron2448]

@@gotturbo100 Even yours looks like Crap

[@gotturbo100]

@@redbaron2448 hahaha have a great day

[@Thamac15]

Operator error 100%!!!!!

[@jasongarnes]

I hope you aren’t a “professional” detailer

[@dansemec3381]

There's always that one guy who blames the product because he doesn't know how to apply it.

[@Six3SixTay]

Dude I wish I could like this comment a billion times!😂 Smh, always that one guy who has user error problems…But shits alllll over the product. Zero self accountability…

[@GokuInstinct1]

How much pressure are you supposed to apply? I kinda messed up my trunk with streaks. But the rest of it looks great

[@redbaron2448]

@@GokuInstinct1 medium pressure

[@GokuInstinct1]

@@redbaron2448 gotcha thanks. I also waited too long before wiping off and did it in sunlight. I hope reapplying will fix it.

[@redbaron2448]

@@GokuInstinct1 yeah if you go to the website it tells you how to correct the streaking. Don't do in the Sun wait 45 to 60 seconds to Haze then wipe off then let it dry for 24 to 48 hours

[@denisduperre280]

No complaints here. I've been using it for many years. Too bad you're getting poor results . Are you using a prep, or applying directly after a compound or polish?

[@redbaron2448]

@@denisduperre280 yep using everything been doing it for years if you go on his website and KZbin channel he explains why this happens and how to correct the problem

[@denisduperre280]

@redbaron2448 I've also been detailing for many years and I've found Adams products to not only be affordable, but very user friendly. I've used both the regular and advanced 9 year coating and achieved amazing results. Ceramic is only as good as the time and prep prior to application.

[@redbaron2448]

@@denisduperre280 if the product is that good prepping doesn't matter only if the product is bad you have to prep to make the product look good 💯

[@denisduperre280]

Ceramic coated cars have to be paint corrected. All swirls, scratches, holograms and hazing should be removed. Whether you use C6 ceramics at 100 bucks an ounce or Adams at half the cost, results are only as good as the prep. I specialize in Black cars and can really appreciate the added depth you achieve with a proper 2 step. I would suggest trying Adam's less concentrated formula. ADAMS GRAPHENE CERAMIC SPRAY. This product 👌 is as easy as it gets, and can survive 2 Maine winters without a refresh.

[@Haydarov_Igor]

In my condition 72-74 degrees dry climate in the garage, I could leave it on for 5 minutes and still level it super easy. I don’t know what you got to do to make it streaky. I came back in about 2 hours and found some high spots. I just put little more coating on top and wipe it off. And that’s it high, spots gone. That was my first time applying ceramic coating and I can’t imagine easiest application.

[@PersonalUseChannel]

5 minutes? too long. i set my timer at 2 minutes at room temperature.

[@robertojames7904]

I've used Adams graphene on half a dozen of my cars over the years with perfect results. I know that the product, first the original and now the "advanced" last for years. It's easy to apply and I haven't seen any of the problems you are experiencing. By the way, that is NOT a "neon" light. I hope you don't charge for your services. And you seem angry. What happened? Did you ask Adams for money and they turned you down? That's my guess.

[@Empire-fv5oo]

You simply didn’t apply the coating adjusted to temperature and humidity. Don’t blame the product. It’s you.

[@davidautwood157]

I did it yesterday for the first time and worked perfectly

[@nachomandetailingservices1057]

It does suck but you didn’t properly prep your car!

[@redbaron2448]

Yes I did

[@JerseyPiney]

Sounds like you have very contaminated paint. You need to decon it first and fully prep your paint before applying that stuff. I know that stuff works so you did something wrong somewhere.

[@RoadTripA1A]

It's junk when you can't apply it correctly.

[@driftracing08]

The spots are the chemicals that are in the city tap water when rinse your car and let it dry itself

[@VesselFitterguy]

First have to use a chemical decontamination process first and paint correction if needed..which is always the case.

[@johnrod90jr]

It doesn't look like a good prep job. Is all in the decon prep and correction dirty clear bad outcome.

[@boskosdoghouse]

Not that I'm a fan of Adams, you really should be polishing the paint with a DA before application of ANY product

[@gotturbo100]

If you have high spot. I would suggest like adam’s start to begin with polish by hand. Depend how many time you let it cure. When i do have high spot that what i do first.

[@jonathanmead3982]

He definitely does not know how to correct paint and looks like he left it on to long the streaks are called high spots this is the only coating I instal and I have yet to have any problems with adams they are amazing

[@dr.ahmedagamia2897]

We are using it in our shop and its great

[@paras2971]

Don't buy from ali baba

[@daniels5333]

Why not? If it’s Adam’s, it’s Adam’s right?

[@denisduperre280]

Learn how to apply the product correctly.

[@redbaron2448]

@@denisduperre280 easy peasy, product just sucks 💯

[@jordangray4004]

It’s all in the prep work too it’s not always just the products fault.

[@jamiecormack5900]

Honest review