Adams UV Graphene Spray Coating! Compared To the Spray Sio2 Coating!

Today, we put Adams UV Graphene Ceramic Spray Coating through the Apex Detail Review Process! Due to Graphene's honeycomb structure and chemical nature, Graphene allows for increased slickness, depth, durability and does not retain heat.
Graphene has a very high water contact angle and lower sliding angle when compared to most coatings on the market. This means any moisture in any amount will slide off much easier to minimize the risk of any water evaporating on the surface and causing water spots.
The Most Chemically Advanced Formula In Car Care
Once Graphite is converted to Graphene, it becomes the thinnest and strongest material in the world. Graphene alone does not form a coating and to create a Graphene Coating, it must bond to other molecules. Adam's line of Graphene products utilizes Graphene molecules by grafting them onto the ceramic backbone of our Ceramic Coatings.
Adds 1+ Years of Extremely Hydrophobic Protection
Graphene Ceramic Spray Coating gives you extreme hydrophobic properties, enriched gloss, and long lasting protection.
Adam’s UV Graphene Ceramic Spray Coating is an easy-to-use Ceramic Coating that can be applied in minutes. Great as a stand-alone product or topper for your current Ceramic Coating. Like our other coatings, this formulation utilizes Adam’s Ceramic Glow Technology!
Adams Graphene UV Spray Coating......www.amazon.com/s?k=Adams+grap...
Adamd Ceramic Spray Coating....www.amazon.com/s?k=Adams+cera...
✅ TRUE GRAPHENE CERAMIC SPRAY COATING - In the car care industry, ceramic coatings and nano technology have become buzzwords and industry standards and although sometimes effective, these are not true “ceramic coatings”. They are silica infused products that behave like a coating. Adam’s has created the next evolution of ceramic coatings creating a legitimate spray graphene coating.
✅ PATENT PENDING CERAMIC GLOW TECHNOLOGY - Now with Patent Pending Ceramic Glow Technology , ceramic coating your vehicle has never been easier. Infused with UV tracers that activate with UV Blue Light, you can visibly trace your ceramic application & never miss a spot. When used with Adam's UV Flashlight, this coating allows you to see where the coating has been applied!
✅ EFFORTLESSLY COAT YOUR ENTIRE VEHICLE - Ceramic Spray Coating is an industry changing product that uses cutting edge technology to seal your paint! Using the most unique and user-friendly graphene chemistry on the planet, weekend hobbyists and detailing enthusiasts can easily add ceramic graphene protection to their exterior surfaces. This will be the most powerful addition to your professional car detailing wash kit or your arsenal of car cleaning supplies.
✅ GREAT FOR ALL EXTERIOR CAR SURFACES - Adam’s Ceramic Spray Coating provides protection to an extreme range of areas on your vehicle. Painted Surfaces, Wheels, Glass, Headlights, Plastic Trim, Bed Liners, Tonneau Covers, Canvas Tops, Floor Mats, Chrome, Unfinished Metal- All are safe to be protected. As much as we want you to spray the entire vehicle at once, we strongly recommend that you go panel by panel to ensure a thorough application and control of overspray.
Data sheet and resource page for products by Henry Freeman! docs.google.com/document/u/0/...
Follow Apex Detail on INSTAGRAM for more exciting projects!! / apexautodetail
apexautosurfaceprotection.com
FaceBook Group... Apex Detail Support Group..... / 946245059134747
#adamsgraphenecoating #apexautodetail #graphenecoatings

[@mikea5205]

Detailing companies will step up there game because of guys like Brian. He exposes bullshit products to the masses so they have no choice but to make good stuff. Thanks for being our detailing ambassador.

[@derek723]

Exactly. If you read the description of the graphene spray on Adam's website, you'd think it's a much different product than their ceramic spray coating. They mention higher contact angles for less water spotting (funny that they're openly admitting ceramics have water spotting issues), but as Brian states here, there didn't seem to be much difference in hydrophobics

[@onrdetailingnews802]

Seal n still the best

[@henryfreeman6113]

I really wish you still used the apex review system board....!!!! You use it from time to time but it’s crucial to help make my purchase

[@ST-Viper]

Just want to give a big thanks for the consistent content! Always amazing quality and thorough!

[@henryfreeman6113]

“It looks like a hotel room” ~ Brian 😂😂😂😂😂😂

[@JP-yp2yw]

I busted out laughing!!

[@stevejames1563]

Too much CSI !

[@madwax1360]

Love it!

[@petergenao638]

Laughed way too hard waking up neighbors 🤣

[@davecarlson6275]

I have probably watched twenty of your videos, and I learn something new from each one. Thanks for being the consummate professional and taking the time to do this for all of us! I don’t know how you find the time along with managing a business...

[@williamthomastaggart5080]

Nice video Brian and somewhat perfect timing. I just placed an order yesterday for Adam’s 7-year graphene coating at the request of my client.

[@scenicroadwaysyt]

Was hoping you'd review this stuff and here it is! Thank you.

[@ldtriton]

Excellent review... Can't wait to see your review on the actual Graphene Coating from Adams.

[@martyfromdvag]

Love the detail in this review as always and very interesting comparison However I was curious to their new 7 year coating. But bravo on the demonstration as to the uv tracer!

[@akelaton]

Great video. Thanks Brian. You are the best !!

[@neilwalker5041]

Great review between graphene and sio2. I was hoping for more endurance from the graphene. As always what a great review full of knowledge.

[@timbrown9731]

Hi Brian, thanks for the great videos.

[@MrBod4life]

Bro great content! i would love to see you put these producuts against other SIO2 coatings like carpro, gyeon, etc for the beat down durability tests. Thanks again

[@kaseyelliot8091]

Amazing content ! Always debunking advertising claims and helping start-up detailers make informed decisions as to which products they should have in their Arsenal ! Thank you so much Brian !

[@detailcentral]

Informative video. I was not able to notice a distinct difference until the use of the gloss meter. I find the spray coatings a pro for time, quality, and cost. The average customer see a real difference in a before and after, which is helpful in their return for service. Thanks

[@chrismurphy783]

The hotel room comment was priceless!

[@mohamedgabdelrahman4512]

Thanks Brian I was looking for someone testing these products

[@rocoroco814]

Can you do some sorta water spot test next time? like leave it in the hot sun and let it bake then come back a couple days and see if it's easily removable?

[@johnpawlowski804]

AWESOME video Brian. I used the GRAPHENE spray for a topper.😎👍👍

[@6RAW6]

Love the videos as always. Also for those looking for more test there is a guy out of Tyler Texas that has done a 42 way coating challenge. Perfection Correction - Scott. Really fun to watch. You should give it a look.

[@jasonwinslow3543]

I really appreciate your objective reviews. My takeaway: great gloss, average chemical resistance, easy to use, time will tell on actual longevity.

[@swoopjunky]

And where people park it. Inside outside, under a cover or no cover, I park in my garage so longevity should be longer

[@qmoonwalker3847]

Great idea using the 3D-One and what looked like a Uro fiber. Gave me an idea of removal ease of this type of coating!

[@1stfrompuertorico568]

They've done great incorporating UV search availability so you can check where it is missing or higher application but they need to be more resistant and better gloss for the price they ask. Still is better to use Ethos Graphene or their Ceramic, or Griots 3 in 1 or Turtle Wax Hybrid line not only in protection but also in price. For example, Ethos Graphene for $99 and 5 years protection is 20 a year the cost and maintenance with Defy is easy and cost effective. Another example, Turtle Wax Hybrid jumped 13 points in gloss units and kept it until the end losing about 4 points only. This one from Adam's jumped only 7 points in gloss units and at the end lost 4 almost 5. Adam's has other good products but these two require a revisit to surpass others also in durability. As far as I know, this is something Turtle Wax and Griots has been doing with waxes and they still don't have Graphene. Thanks again for your review and funny comment about the hotel. 😄👌 Xoxo from Puerto Rico 👍🇵🇷

[@Chris-xm1iq]

Hi Brian, Absolutely great content and videos! Thank you Could you use both of these as a topper to Opticoat ceramic pro? Thank you

[@lifeofbrian9511]

Hahahahaaa... your humor sneaks up and catches me off guard at times. I spit out my tea after the hotel room remark.😂

[@TheCarDetailingChannel]

Both seem great for productivity

[@bigd9848]

I have used the Graphene ceramic coating from Adams. I have not used the spray just the regular true coating.I like the way it goes on. I used it on everything ✊

[@kyled4156]

Great review my friend👍

[@grogfisher]

Good review Brian...

[@13pcbs]

It would be handy to see / use UV after application to see / monitor the coatings duration as a guide to when re-application is needed.

[@olgai.menendez9493]

I think I would wait when it gets better! Thanx a lot Brian ! 😬

[@hughburton9021]

Great video. Can you put a ceramic/graphene coating on a 3m hood clear bra? And special issues to watch for?

[@peterjurenovskis5933]

Brian, Let me know which hotel chains you stay at...I’ll go somewhere else lol. Great job on the video. Keep it up.

[@sammylin2459]

Brian, Thanks for the great video. I have a question. Is it a bad idea to clay bar a cermaic coated surface every half year or 3 months? I noticed some hard particles on my car's front hood (car is cermaic coated) and would like to remove them by clay bar. Please let me know if this is a bad idea. Thank you Brian.

[@GainingDespair]

Should have tried the UV light at the end for the heck of it.

[@rustycook3318]

Do you think the Adams Spray graphene coating would make a good maintenance topcoat for a traditional graphene coating? The company I got my graphene coating from said I could use any ceramic coating maintenance products as a topper such as Reload, but that doesn't sound right to me.

[@robo7767]

Would you be able to use either one as a topper for the 5 year Adam’s UV coating?

[@joeydny5816]

Think they can be used as a topper for something like ethos graphene coating?

[@PeteyMcSavage]

I always apply the spray coating in the sun helps me build thicker coat can you test this

[@l8tapex]

hmm so how does the graphen actively bind? The carrier substrate can be modified for this difference. Graphene is also very conductive. I am currently doing a little R&D myself with graphene oxide. Specifically charging and pressure treatment. Slick 50 had Teflon. Just a suspended solid in a oil carrier and not able to bond to metal as claimed. Teflon has particular methodology to bond to metals.

[@sigurdurhallgrimsson1291]

nice, thx but in the Adams kit there is a booster with it to use after washing and it would be nice to see if those boosters work..! cos as we know it is a hard work and time consuming just to prepare under a quality coating. Thanks.

[@sam2753]

I've used the new Graphene Advanced Ceramic Spray Coating. It went on easily even down here in Florida so that's a definite plus. The rainbow effect is also a no brainer indicator of when to buff it off. I do find the BC-2 & BC-3 easier to use though in this heat, just not quite as much longevity as the Advanced.

[@wildpony1957]

Hard to tell any difference on camera. Would these work on top of a good ceramic coating?

[@jimmyqballs]

I really do like the idea of a UV traceable coating, that way it's much easier to tell when you have removed it lol

[@jamest7485]

True, but you gotta buy the flashlight lol

[@gaberivera7228]

But the questions is, where does it land on the apex review board!

[@brianhunt914]

What happened to the traffic film test? Though way more that what would truly be encountered on the road and so on.. but it was a consistent test to compare.

[@jiajunryanho6332]

Hey Brian how would you rate the adams graphene coating against art de shine graphene coating?

[@norcalspitshine9067]

Nice thanks Brian

[@JCK119]

Can you do a comparison between the Adam's Graphene 7 year vs Ethos' 5 year graphene coating?

[@Richard-lw4cf]

Hello nice post. Is it possible for you to put any of this sealants again the latest sealant ??? That is the......Zymol Atomic Graphene Shield Paint Sealant. I think many want to see that before buying this new sealant. Thanks.

[@sanjaygupta666]

Can you recommend the best dust & dirt repellent spray coating? This is a much bigger issue for me than water beading, living on a dirt road

[@pullingthestrings5233]

Yes

[@raphael9339]

How does the Adams Graphene compare to Artdeshine Graphene and Ethos Matrix Graphene? 🤔 Can you please do a durability test between these 3 🙏

[@coachtim6188]

He is now partnered with artedeshine for his own product line. I doubt you would get a truly objective test.

[@YoMoe83]

You should test Polytop Apex seal. Since your shop got the name :) its a german brand, Polytop if you never heard about it :) heard it is a good easy to use sealer with 6-12 months durability going for it... nice upload as usual btw, greatings from Norway.

[@danayo8852]

I am applying the Adam’s H10, but the uv light shows a cross hatch pattern with darker streaks. What am I doing wrong?

[@richardseem7948]

was my eyes playn tricks on me or when u applied grafine looked like u were pushing a oily substance?

[@sactawilliams]

Love all your videos, Brian. Where can I get the hose nozzle you use? Also, do you do any training days at your shop for enthusiasts that aren’t looking to go into business, just want to get better results in their own garage?

[@apexdetail85]

I will resume training as soon as Covid is under control.

[@5redwine1]

Brian been watching your video's for a long time. Hope you can answer a couple of questions on the new Turtle was polish and wax. After using the TW Ceramic Polish and Wax do you need to wipe down with an IP solution before using the TW SIo2 Spray Coating? Also, I just got my GMC pickup out of the body shop where they painted the entire drivers side from front to back do I need to wait any time for paint to cure before polishing?

[@apexdetail85]

No need....just coat after correction.

[@ptheledge5390]

Have you tried the glassparency coating yet?

[@vadimyevdokymov7216]

Hello. At what temperature can Adam's Graphene Spray coating be applied?

[@senkofam]

Looks like a hotel room. Love it.

[@mattwernecke2342]

Another home run maestro! I just heard about Iron removal from paint. Can you recommend a product? Also, what gloss meter are you using? Thanks!

[@henryfreeman6113]

Gyeon iron

[@santi8751]

Hey Brian have you tried the 303 graphene spray coating yet?

[@maxcichon2557]

Brian, I don't know whether or not you monitor older threads, but I wanted to add this: My daily Driver, a Black Metallic 2015 VW GTI suffered damage by a distracted driver and required the repaint of the entire passenger side. I took this opportunity to perform a full paint correction and decontamination after it was returned. I decided to use Adam's UV Graphene Ceramic Spray Coating. As you show, it is stupid easy to use. It looks great. One added benefit that I have heard no one mention: graphene is a wonderful electrical conductor as opposed to Si02, an insulator. We had the Perfect Storm conditions for dust yesterday: 20 MPH winds and

[@MikesAutoDetailing]

Great video

[@-curedetailing2162]

Graphene coating seems to be a hot product these days. Thank you for introducing a good product.

[@PeteyMcSavage]

I’ve switched to all details getting the spray coating it saves me so much time been doing it for months they should call it money coat

[@donmckinney4091]

How long does the spray last?

[@ohboy2592]

Don Mckinney I used turtle wax hybrid spray ceramic coating on my car 3 months ago. It sits in the Florida sun all day and water still beads up and dirt washes right off.

[@kblazindetailing9846]

what kind do you use

[@georgiannegooday9108]

Yes!!!! Finally!

[@MyGuyKirby]

It was hard for me to see a difference between the two products. Doing the polish test shows how thin those coatings really are.

[@pj9241]

Been living the graphene detail spray Adam’s has over the 303 graphene coating. The problem with these products is also their benefit they bead water strongly which is fine but you end up with water spots. But look great when clean and dry like all products mostly do lol

[@richstevens3550]

Waiting on mine !!!

[@thegolflife7565]

How does the graphene product compare to Ceramic Pro 9h?

[@Gnarlycaveman]

the graphene spray should sit for 2 minutes before removing. idk if you just edeited that part out or whatnot.

[@danielb-c9100]

Can you do a video of recollecting letter c's

[@LKN4WAR]

I was rolling at the dead pan hotel room comment 🤣🤣

[@mattwernecke2342]

How do perform this service for people when it requires a 48 hour cure time? Do keep the car at your shop for that length of time? I'm going to be mobile working out of my Prius, until I find a suitable location. Thanks!

[@apexdetail85]

If you are mobile....coat it and go.

[@Mrjozz011]

Brian have you used Zep truck and trailer wash before? If you have what’s your opinion on it.

[@apexdetail85]

I have not used it.

[@1stfrompuertorico568]

1st from Puerto Rico 👍🇵🇷

[@middlegaautomotivedetailin1350]

They are good. But I would pick traditional any day of the week

[@benjaminkerneves8552]

Is it me or the water shedding is actually better on the bare panel? the beading to me is not as important. Just want the water to get off the panel at the end no? like if it beads and dries in the sun...hello water spots...

[@lazych1nk]

Nice!

[@williamsuryawinata9427]

Can i buy your formula? i want to make it by self thankyou

[@JFomo]

You didn't hit it with the UV light at the end

[@PiotrTester]

nice coats

[@markevanado9463]

Does the light help the graphene cure faster, if so, can you please provide a link?

[@henryfreeman6113]

Look on amazon. The Adams branded one is going to cost a hell of a lot more… And no the UV light will not make it cure any faster

[@crunchyblack2224]

Great review! Will you be reviewing the new DPC T series coatings?

[@detailone978]

Beware of Dallas Paint Correction as Scott lacks professionalism as a business owner. Read the comments in this forum. He blocked me from his group because I had a concern about his coatings and called my comment silly as he's done before on his KZbin videos. Very immature in my opinion and not the way a reputable business replies to comments. www.tacomaworld.com/threads/buyer-beware-dallas-paint-correction-dpc-shield-luxury-microfiber-com.625055/

[@whiskkers9291]

So is this not really a good coating? I really thought this stuff was supposed to be more durable, but in other test it seems the retail store Turtle wax seal n' shine holds up better then this stuff.

[@AMindInOverdrive]

9:57 Seems like the areas that had the tape applied were the most hydrophobic...odd

[@DarkstarDarth]

I recently used turtle wax Ice and Seal for under 10 bucks and appears the same results as vid. Also same application.

[@user-kp6ld8qg6w]

😂🤣 it looks like a hotel when you get there or a hotel after you leave😂🤣😂🤣

[@lifeofbrian9511]

Hahahahaaa

[@yousufkhan02]

you said its supposed to last a year?????

[@tommartin1223]

Awesomeness

[@meanf1502]

Might have to try the regular sio2 one Brian where did you get that light at

[@krisbeasley6649]

You can order it from Adams or Amazon. Any ol UV light would probably work. I ordered a $8 instead of the $15 Adams one.

[@meanf1502]

@@krisbeasley6649 ok thank you

[@richardseem7948]

not only are you a master detailer it seems ur a comedian.lol.great video and product review good friend. seem ok (no pun intended)my last name.still think gyeon coating looks and performs better.🍻🍻🍻🍻

[@lorenreyes2855]

Brian as always a great informative and helpful! I like the UV light check. But I believe as a detailer. Both Cermic coatings are not as Good as Turtle hybrid ceramic coating? I've seen Turtle hybrid seems to collect dust. Though using Ethos Defy as a topper. It counters the dust. I was going to try Adams cermic Graphene. Now you have saved me from changing what works for myself and my customers. I really appreciate your great knowledge and advice!

[@chadj8349]

Hotel room!😂😂😂😂 I’m glad 3D one and a microfiber pad removed the coating because that’s what I use followed by AngelWax perfect polish on a rupes yellow pad. I can tell the coating is gone when the gyeon prep doesn’t beed up and is just flat on the surface.

[@richstevens3550]

Definitely Richer and Darker

[@davetires7300]

How’s the old corvette coming?

[@apexdetail85]

Nicely! Fun toy!

[@a_real_jive_turkey7772]

Some constructive advice. Talk over the parts of the video that are silent for entirely too long. Project farm is a good example of filling testing time with voice over. It makes the videos easier to watch. I will subscribe though thanks for the vid

[@mag1vl]

Hello Brian from the Aussie guy :) Just reviewing some of your older posts, but on the Adams Graphene Ceramic Spray Coating you didn't wait the 1-2mins after applying it like it says on the bottle or have they changed the instructions?

[@pwrshots]

Bri do commercial cleaning products harm the clear coat in any way?

[@apexdetail85]

Anything not PH neutral can take its toll.

[@pwrshots]

@@apexdetail85 thanks