ADD W1 v3.3 Oil Catch Can Kit For The Veloster N!

[@bobreese4807]

You removed the hose from the rear valve cover to the air intake tube. What did you do to the tube that was there and did you plug up the crankcase output on the rear valve cover?

[@KDMStation]

I added a breather but since then I put a tee on the intake side and ran the crankcase output into that tee.

[@thomaslascano1135]

If you were going to use your engine cover. How would you make it work?

[@KDMStation]

I would have to put a 90 degree fitting where I have the breather at and then add a tee to connect that back into the intake. It would bring the lines low enough for the cover to fit back on.

[@wickedchild10]

⁠@@KDMStationwould you need a check valve on the intake side if you remove the breather and add a tee?

[@KDMStation]

@wickedchild10 no check valve at all since the check valves should be installed near the can.

[@dougie041991]

I feel like the images in the instructions were probably from Walter's (boostd_n) install 😂

[@KDMStation]

Lmao I think your right 🙌🏽

[@killabob555]

do you need the breather with this catch can?

[@KDMStation]

You do not. You can add a tee from the intake and connect where I did the breather.

[@CloD44]

Do you need a check valve or do you can run without it ?

[@KDMStation]

You need a check valve to ensure the can isn’t getting pressurized

[@CloD44]

@@KDMStation there’s many option but I don’t know what choose with stock engine , naturally aspirated turbo 9mm or 15m pro .

[@KDMStation]

@@CloD44 choose whatever you feel you fits your needs.

[@CloD44]

@@KDMStation thank you for all your help . You got a subscriber 🤝. I’ll see what I have to order if one 9mm and one 15m since I only have 2 hoses , one inlet and one outlet with the oil catch can new version 3.

[@KDMStation]

@@CloD44 appreciate the support! I have the v3.3 can so I’m using two 15mm and one 9mm

[@dsitum]

Did it void your warranty?

[@KDMStation]

You can not get a warranty voided but a claim can be denied in the US.

[@klasseact6663]

How much was it shipped out to you?

[@KDMStation]

All the pricing is available on their website. The anodized clamps bring the price up, but worth it for me. It was also on sale for $329 when I last looked.

[@klasseact6663]

@@KDMStation thanks, I'll stick with the SXTH Element catchcan for $249.

[@KDMStation]

@@klasseact6663 two totally different styles of cans. You’ll need two of them at that price to do what this can does.

[@stephenkim589]

New vid! Thank you!

[@KDMStation]

@@stephenkim589 appreciate the love. We should have a couple more uploading soon 🙏🏽