We took our 2020 Polaris Rzr Highlifter and added 6 inch portals with 45% gear reduction, 37 inch bkt tr 9.5 wide, 300m ball joints, hd tie rods and a frame stiffener kit all from Superatv! This thing is a beast now!
Пікірлер: 69
@christophersmith36773 жыл бұрын
I’m sure this thing is a beast with that setup and the tune
@LCPowersports3 жыл бұрын
Oh yeah man It feels like a beast I can't wait to get in some mud!
@a2honda1203 жыл бұрын
Looks sick, good job
@LCPowersports3 жыл бұрын
Thanks!
@ClaytonHenderson5213 жыл бұрын
Man, it came out so good! We will have to get our machines together in the near future!
@LCPowersports3 жыл бұрын
Definitely!
@LCPowersports3 жыл бұрын
Thanks man!
@RealTalkPowersports3 жыл бұрын
That thing huge!!
@LCPowersports3 жыл бұрын
Gotta get a step ladder for lisha 😂
@RealTalkPowersports3 жыл бұрын
@@LCPowersports 😂😂😂
@RealTalkPowersports3 жыл бұрын
Beast Mode!!!
@sparkyprep20773 жыл бұрын
Looks great. I did something similar to my 2018, except I am running 37" Motohavoks.
@LCPowersports3 жыл бұрын
Awesome how do you like the motohavoks
@sparkyprep20773 жыл бұрын
@@LCPowersports I like them a lot. They pull great. Plus, I think they ride smoother on the hard pack than the BKTs.
@LCPowersports3 жыл бұрын
@@sparkyprep2077 yeah iv herd they do better!
@903environment10 ай бұрын
Do think u should've went with the 37x10x20 or they wide enough,r maybe 40x10x22, it looks damn good jis like that tho
@jordanm59592 ай бұрын
Did yall use a frame stiffner with the portals?
@720luckymutt3 жыл бұрын
it looks like the rear driver and the front passenger rotor are on backwards look at the fin directions
@903environment9 ай бұрын
How much do one of those portal weigh
@elmoro2328 Жыл бұрын
What size tires and lift?
@benjamingavins67622 жыл бұрын
So how wide was it? Thinking of doing the exact same setup but your wheels look like they have more offset? My trailer is 76.5” wide and I don’t think it will work… 😞
@LCPowersports2 жыл бұрын
Close to 80 it would barely fit on my trailer and it is 82in wide
@-CHaPPy-3 жыл бұрын
Should've just skipped the time lapse (I did), and showed before and after. Looks slick! And you forgot the tape measure 🤭
@LCPowersports3 жыл бұрын
😂 don't hate lol next video I'll definitely get some measurements
@-CHaPPy-3 жыл бұрын
@@LCPowersports just giving you crap man lol
@LCPowersports3 жыл бұрын
Haha!
@philliplucke13393 жыл бұрын
Nice
@LCPowersports3 жыл бұрын
Thanks!
@johngoss82103 жыл бұрын
does it scrub at all thinking about doing the exact same thing but want to make sure it doesn’t scrub with the 37’s first
@tooturntmudcrew37313 жыл бұрын
You’ll be good
@bigguy8974 Жыл бұрын
Where was that creek at? Looks great!
@LCPowersports Жыл бұрын
It's a local creek. We love it!
@bigguy8974 Жыл бұрын
@@LCPowersports yea thats what im trying to find out, exactly where lol. Unless its a secret! Im in louisiana and ride in mississippi all the time at red creek. Thought itvwas canal road at first.
@LCPowersports Жыл бұрын
@Big Guy I wouldn't mind you coming down and riding at all! It's all privately owned land so you would definitely want to be with us if you did go.
@bigguy8974 Жыл бұрын
@@LCPowersports oh ok i gotcha. Heck yea man im always down for a ride. Not sure how my tires would do in that creek though. Im on 38" qb's.
@LCPowersports Жыл бұрын
@@bigguy8974 any tire usually does good down there when it gets packed down.
@andrewjones49162 жыл бұрын
What part number did you order for your front diff super atv has told me that they don’t make one for a 2020 Polaris rzr highlifter ?
@LCPowersports2 жыл бұрын
I believe in the video I said that they don't make one. If I didn't I apologize. I found out the hard way lol
@andrewjones49162 жыл бұрын
Oh ok. What did you end up doing ?
@LCPowersports2 жыл бұрын
@@andrewjones4916 I went with the oem diff. Having the portals takes alot of stress off of everything drive train wise!
@andrewjones49162 жыл бұрын
Ok thank you for responding. I am just trying to find something different I have gone threw three front diffs with the stock outlaws on it.
@LCPowersports2 жыл бұрын
@@andrewjones4916 dang sorry for that man! I'll do some research and see what all I can find! Then I'll give you some options.
@frosty73063 жыл бұрын
What axles are you running
@LCPowersports3 жыл бұрын
Currently I'm running stocks on the front and rhino 2.0s in the rear
@leeethomas6582 жыл бұрын
Where did you order tires and wheels from?
@LCPowersports2 жыл бұрын
I got the rims from wild bore atv and the tires came from my local atv mechanic Butler Atv&Repair
@leeethomas6582 жыл бұрын
@@LCPowersports man thanks for fast reply
@LCPowersports2 жыл бұрын
@@leeethomas658 no problem!
@angelajordan183 жыл бұрын
I want to go riding with you.
@LCPowersports3 жыл бұрын
I need to teach you to drive one of them
@motorfntrash42543 жыл бұрын
What rim size
@LCPowersports3 жыл бұрын
20 inch
@251suzuki2 жыл бұрын
What's your top speed with this setup? Thanks
@LCPowersports2 жыл бұрын
I haven't ever done it on gps but I'd say at least 65 70 the speedo shows 92 but it's not correct. Honest opinion, it still rips and feels just as fast. And the torque is unreal!
@251suzuki2 жыл бұрын
@@LCPowersports that's awesome!! I'm looking to run 37-40 bkt 171s (haven't made my mind up on size) and 6 or 8" portals with 45% gr
@LCPowersports2 жыл бұрын
@@251suzuki awesome! You'll love it!
@251suzuki2 жыл бұрын
@@LCPowersports last question where did you get the front bumper with winch mount? Can't seem to find that one
@LCPowersports2 жыл бұрын
@@251suzuki comes stock on the high lifter edition
@lukeholton72153 жыл бұрын
How fast is it now
@LCPowersports3 жыл бұрын
Not sure it still will get up and go I gotta get my speedo back right and I'll let you know
@lukeholton72153 жыл бұрын
@@LCPowersports alright thx man
@oznoma12 жыл бұрын
I also want to know how fast. I have highlifter xp4 with 37 no portals. Like my speed when needed. How much did you lose if any?
@LCPowersports2 жыл бұрын
I need to do a video where I test the top speed. It's still fast enough for me though and the torque is insane
@oznoma12 жыл бұрын
@@LCPowersports thanks, just trying find out if these will keep good speeds and be reliable.