Polaris RZR XP4 1000 High Lifter on 42's and 6" Portals

This is a video of the progression of my Polaris RZR XP4 1000 High Lifter. I started out with stock suspension with 33" BKT on 20" wheels then I upgraded to 3" Super ATV bracket lift, 1.5" forward A-arms and 37" Motorhavok on 24" Fuel Kompressor wheels. I ran this setup for eight month then for the New Years Eve ride at Sabine ATV Park I broke a radius rod, bent a trailing arm, broke a shock , axle shaft and the front output shaft in the transmission. Well now this gave me the opportunity to upgrade again so I rebuilt the transmission, installed Super ATV high clearance radius rods, Super ATV arched trailing arms, Super ATV GDP 6" portals 45% reduction and 42" Motohavok tires. Thanks for watching #sendingitcajunstyle
#SuperATVhighclearanceradiusrods #SuperATVarchedtrailingarms #SuperATVGDP6"portals45%reduction #42"Motohavoktires.

[@twngatzz]

Man....ya'll boys off da chain!!!! Super Nice!

[@shannonrichardson3405]

Love when a rig is used!

[@christopheranderson6500]

Them 42’s is🔥🔥🔥

[@sendingitcajunstyle1020]

thanks for watching

[@keltonbrixeytheoff-roadout1586]

Love the machine man

[@sendingitcajunstyle1020]

Thanks man!!!

[@keltonbrixeytheoff-roadout1586]

Your welcome

[@HairExperience]

Great job and video !!! One with the transmission would have been a good video to. What you could do is take that footage and slow it back down. And do a voice over as you going through it. Id love to see that. Thats one of the fears I have out of my RZR on 37's

[@cajunchaos4638]

🔥🔥🔥🔥

[@ClaytonHenderson521]

Looks really good, I've been thinking about going to 42's.

[@sendingitcajunstyle1020]

Thanks for watching. I'm really satisfied with the setup of 6" portals 45% reduction and the 42" Havoks. Last weekend was the first ride I made with the new setup and it worked great but I took it easy. We have another ride planed for May 7-8 at Sabine I'm going to give it hell and see what it can handle!!!!

[@ClaytonHenderson521]

@@sendingitcajunstyle1020 yeah I have the same exact setup just on 40” bkt’s. But I have an extra 55%GR in low and it’s an absolute tractor. Lol

[@sendingitcajunstyle1020]

@@ClaytonHenderson521 High Lifter ?

[@ClaytonHenderson521]

@@sendingitcajunstyle1020 yes sir, it is.

[@juniorgarcia4246]

To clear 42” tires do you need forwards A arms

[@warrantykillermotorsports3569]

I have a similar story 😆👍

[@sendingitcajunstyle1020]

I’ll check it out. Thanks for watching!!!

[@tyreeweston466]

What clutch setup are u running, I have the same setup basically with 8" portals. Been have power problems in high gear lately

[@tyreeweston466]

Have u had any trouble with ur bike cutting off after idling or Just crawling around for a while

[@joehurt711]

Hey guys i really like this build!!!! I have a rzr 1000 4 and looking to base your build to my machine. I was seeing if you could hook me up with part used for suspension and portal set up. And what gear ratio portal and do you have any engine mods. How does It handle for power with those big wheels?

[@jrsmotors9788]

👍

[@brentwolfe6216]

What kind of speeds do you get with the 6inch portals

[@2birddogsandawolfdog945]

Crazy. What ya do for money to dump into these toys?

[@mikehepp5189]

What's yiur top speed on that setup

[@brianbrown8029]

Buggy looks great. You still happy with this setup? What is the height at the roof now? Thanks B

[@sendingitcajunstyle1020]

Yes, I’m very happy with the setup. The roof height is around 9ft. Thanks for watching

[@PedroLopez-hl1no]

Hey buddy. I'm try to due my front. I'm have 2010 .

[@251suzuki]

Were you able to turn the 42s with the 45% reduction? Have a rzr xp1000 I'm going with 42" bkt and 30% portals along with my 27% trans reduction.

[@sendingitcajunstyle1020]

I had no problems turning the 42s. Most of the time I was running in high. I have a friend that is running 42" Havoc with 30% portals on a maverick X3 and it runs like it would still be stock. Thanks for watching

[@eckoking8354]

How much money did you put in after the repair

[@sendingitcajunstyle1020]

Around 10k. Thanks for watching.

[@motorfntrash4254]

What bolt pattern are the rims

[@sendingitcajunstyle1020]

It’s 4x156 which is a standard Polaris lug pattern. Thanks for watching!!!

[@motorfntrash4254]

@@sendingitcajunstyle1020 and for can am x3 what lug nut

[@sendingitcajunstyle1020]

Can-am x3 is 4x137 lug pattern with a 12x1.5mm lug nut

[@laredrocket7813]

Did you trade this in? To Ogden powersports?

[@sendingitcajunstyle1020]

No. They bought it from me. I had it for sale on Facebook marketplace.

[@laredrocket7813]

Sweet seen it for sale and instantly recognize it! Why did you get rid of it if you don’t mind me asking?

[@sendingitcajunstyle1020]

@@laredrocket7813 lm going to build a range crew northstar

[@Brittvanegas]

0:57 how wide is that trailer? Thanks

[@sendingitcajunstyle1020]

84”

[@Brittvanegas]

How wide is the sxs ? Thanks

[@sendingitcajunstyle1020]

@@Brittvanegas 74”

[@jimmyxmr]

Does it fit in the garage? Lol

[@sendingitcajunstyle1020]

Yes but only has a couple inches of clearance. My garage door is 9ft tall

[@leroydaniels5793]

looks good except the tires.. that skinny Havoc just does not look good. That`s my opinion we all have our own.

[@sendingitcajunstyle1020]

Yep everyone have a opinion. I went with the skinny Havoks because they are a lot lighter and sometime we ride really tight trails. Narrow trails and a 4-seater don't vibe well. thanks for watching!!

[@buckshotgeorge7201]

Why the little skinny ass cookie cutters? Tires and wheels need to be about 4” wider