Adding This Will Improve Your Trigger | Enhanced Over Travel Trigger Stop

Рет қаралды 39,374

GlockStore

Күн бұрын

Пікірлер: 94

@KeweenawPatriot Ай бұрын

I love the supersoaker in the background.

@2WHEELADVLIFE Ай бұрын

Just came back from Tennessee and stopped by there on my way up to Clarksville. Great staff and great store. Lenny you definitely made that place a destination. I picked up sights for my Glock 43X and a shields 15 round magazine and upgraded my slide release. I was prepared to have to install everything at home in Florida but to my surprise your store installed everything! The best service I have ever had at a gun store.

@myYear66 Ай бұрын

Obviously you have never own one. How i know this is : 1 they are AWESOME out of the box 2 question? Did you change anything on your personal car? 3 your gun is a extension of your self just like the cloths you wear

@zDivyn Ай бұрын

@@myYear66Dude what are you yapping about

@mytquin7605 Ай бұрын

Johnny Glocks has been doing this for years now on all his trigger systems. plus the pre travel is adjustable on his set ups.

@Tom-kv8wy Ай бұрын

I put Johnny Glock‘s triggers in all my Glocks and they’re amazing. What a difference from the factory ones 30 bucks you can’t be it.

@user-jetmachinist Ай бұрын

I modified my trigger housing . Drill and tap 2-56 and use stainless set screw , a little adjustment and it works .

@armorers_wrench Ай бұрын

Did you tap the plastic??

@user-jetmachinist Ай бұрын

@@armorers_wrench of course , since its plastic the set screw will go in tight. Make sure it straight and square . Tap drill is # 50

@Epsonblade Ай бұрын

@@armorers_wrench You can either cut a thread from the set screw itself or for added precision, time and complexity, you can also use a tap. If you so choose, you can then remove the set screw, apply some blue loctite and secure it along with making the proper travel adjustment. I've been doing these for over a decade. Using a tap doesn't make a net positive. The polymer that the housing is made from is very slippery. I have chased the thread cut by the setscrew and tested the theory, if anything it kinda loosens up the setscrew tension. I have also used the tap right after cutting the hole and basically the same observation about slightly looser on the set screw. I prefer to let the set screw make the thread even though I have the 2-56 tap and have used it a handful of times for these. The only thing you need to be careful of is keeping the hole drilled perfectly straight and using loctite to keep your adjustment.

@user-jetmachinist Ай бұрын

@ yes 2-56 tap

@AnEDCFriend Ай бұрын

Not all heroes wear capes

@natet9881 Ай бұрын

Need this for the performance trigger !

@AllAboutSurvival Ай бұрын

I’ve definitely felt that 'spongy' trigger issue before, and this Enhanced Over Travel Trigger Stop sounds like a solid upgrade.

@robmiskowitch6344 Ай бұрын

Outstanding description of the Glock trigger. You made removing the trigger pin look easy, I always struggle with it. As always great video. Thanks.

@loosegoosageify Ай бұрын

I do this on all my SS and glock trigger housings after installing a Timney Alpha, overall the single greatest improvement to the glock system by far. Drill tap and set screw with loctite. 😚👌

@centermass4962 Ай бұрын

I beileve Lenny could sell snowballs to eskimos.

@levilivingston982 Ай бұрын

This is great. Been doing it for a while. This plus pre travel adjustment detent.

@theexpressionbooth Ай бұрын

Just train more and you can easily shoot. 15 splits with a stock oem trigger. I spent all the money on triggers and went back stock after I got good at shooting.

@HenryJPB Ай бұрын

😂😂😂 That Super Soaker in the background!

@forgivenx19 Ай бұрын

I still like the way Johnny glocks does this mod by adding a pin from the top down. In this mod in the video, with the screw coming in from the rear of the housing I would be worried that the screw could eventually move further forward making the safety shelf/cruciform connection a real safety issue.

@SVPractical Ай бұрын

Good point, And he didn’t mention adding threadlocker,

@DrZiptie Ай бұрын

Could just add threadlokker..?

@BWHeitmann Ай бұрын

I’ve got one for the Gen 4 with thousands of rounds through it and the screw has never moved. 🤷🏻‍♂️

@Rayvisin Ай бұрын

I got my mines perfect and put super glue in the rear.

@ThePatriotParadox Ай бұрын

Set screws are used now, more customizable to the individual, but yeah same concept, I been doing this for pre and over travel all learned from the master JG

@roykemp6502 Ай бұрын

Lenny, the Boss of Glock!

@DrDiff952 18 күн бұрын

That's why you still need to offer the fully adjustable Pyramid Trigger

@edwinespinal1054 Ай бұрын

My gen3 Glock I put a a longwolf housing like that. That already came with the set screw doing the same purpose, but very good either way.

@brianrogers7543 Ай бұрын

Lenny, Does that new trigger stop assembly come with the performance trigger as well? Or is the trigger the stock trigger? Thanks Sir for another detailed video🙏

@rockd7142 Ай бұрын

what keeps the screw from backing out due wear ? How often would you have to readjust the set screw ?

@davidmattae Ай бұрын

It would be good if you just tell us what are the possible options for the Glock prize. Like if I’m aware that I can win a 43x or 19 MOS or custom works etc I would definitely purchase more entries.

@glockstore Ай бұрын

We’re just trying to be careful and abide buy KZbin guidelines. But it’s any factory model of your choice.

@AJJ_Golf Ай бұрын

Just bought my patch🤙🏼

@randyfleming3004 28 күн бұрын

Hey Lenny, should I use any locktite on the new over travel screw? Or do you feel it will not move after many shots? Thank you Lenny

@tylerdominiak3210 19 күн бұрын

In your everyday carry you have a Glock 43x with pyramid trigger what spring did you use from kit 3 or 4lb to get that 3.5lb trigger you have ?

@DrDiff952 Ай бұрын

Didn't the Adjustible Pyramid Trigger (gen1) take care of thid problem?

@oneboyscout3653 Ай бұрын

Good show Lenny. I like this

@jose8709 Ай бұрын

Need this for the 43X....

@paulscountry456 Ай бұрын

Lenny is a great host,everybody knows that.

@HuyTran-mc3zb Ай бұрын

Are you guys ever going to make a black yikes connector for the 43X??

@armorers_wrench Ай бұрын

Yikes connector? What does that do?

@brian2359 Ай бұрын

If I don’t want a new Glock, can I have that sweet AR Supersoaker in the background??

@glockstore Ай бұрын

If you win, we will give you the super soaker! 👍🏼

@jamesbasaldua100 Ай бұрын

Do you have refrigerators magnet also.

@glockstore Ай бұрын

We do!

@jamesbasaldua100 Ай бұрын

@@glockstore how much are they sir

@jasonmolihan61 Ай бұрын

Ouch Lenny, I hope your elbow is ok!

@PrayToRestart Ай бұрын

i was sent a santa patch in an order, does that count as an entry?

@abnr1983 Ай бұрын

Will this work for the Glock 43X or 48?

@ernestlathren3597 Ай бұрын

Where do I enter to win the super soaker on the wall

@RangerCaptain11A Ай бұрын

Walmart

@mrphotomanTIM Ай бұрын

Will this be available for the 43x?

@critterdude Ай бұрын

Kool how muc are the patches?!

@TheLoneRanger745 23 күн бұрын

Even Better, install the Glock Factory Performance trigger it has a shorter pull, quicker reset, crisp Clean Decisive Brake, much better than stock ! The striker is preloaded by the slide action, the new assembly just drops the sear, where the old trigger loads the striker spring its this action that causes that mushy feel before the brake . The new trigger just drops the sear for a clean brake, NO MUSHY FEEL . This one improvement makes for a cleaner more accurate shot , HUGE IMPROVEMENT AT THE RANGE , A MUST HAVE UPGRADE FOR YOUR GLOCK !

@thatoneguyshawn Ай бұрын

Will this work with the pyramid triggers?

@glockstore Ай бұрын

It will!

@bryanbennett4221 Ай бұрын

I would like to see the glock sitting on the give away box

@Eber_perez Ай бұрын

Is this mod available for gen4 trigger housing?

@ssnerd583 Ай бұрын

And I thought I was the only one who used a roll of duct tape as an armorers tool.....i have about half a dozen different rolls of tape that I use for these purposed

@DC4EVA Ай бұрын

Pretty soon people are going to have a magnifier to go along with those giant optics.

@RetARMYjohn Ай бұрын

When in doubt use Johnny Glocks version. Much better and won’t move forward. Johnny fixed this issue by moving the screw to the top down position. Just fyi.

@787PuertoRico47 Ай бұрын

If you a Glock owner you should know how to adjust your trigger whit your stock parts it’s old but new for this generation

@Bo34-m7p Ай бұрын

Bought something from yall thanksgiving day and still haven’t received it Never buying again from yall, my amazon stuff gets here way before y’all’s stuff even with the holidays

@CitizenCarrier Ай бұрын

I want “one of these” really badly right now! But, I had Christmas presents to buy for 4 grandkids which made me a little light in the wallet for a couple months. I’m going to the website see what I have to do to enter. If I don’t win one now. I’m patient. I’ll be able to buy “one of these” very shortly. The. I’m sure I’ll be a regular visitor to the Glockstore to “make it my own” so to speak with your mods! 💪🏼👍🏻

@sensay8374 Ай бұрын

This only takes away the reset, but doesn't take away any of the large amount of pre-travel that the Glock trigger has before the wall, which is the biggest gripe when it comes to Glock's stock triggers.

@flako3182 Ай бұрын

Master at glocks period

@natestain7103 Ай бұрын

Dude has rocks for elbows

@armorers_wrench Ай бұрын

Do you guys do porting?

@mytquin7605 Ай бұрын

maple leaf firearms does. they have done all my work and i am always pleased with their work.

@rwmagnus Ай бұрын

Come on Lenny why not polish up the internals on a custom build? Obviously reducing the over travel you would want to make the trigger as good as possible. A little polish goes a long way.

@charlesdesalme6405 Ай бұрын

😂😂😂

@johnnau7275 Ай бұрын

This appears to be another gimmick part which if maladjusted by a fractional part of a turn will only serve to detract from the Glock pistol's legendary reliability.