Install Bluetooth Audio Module on Peugeot & Citroen Radio RD4, RD45, RD43

  Рет қаралды 571,878

Adrian Dragan

Adrian Dragan

Күн бұрын

Пікірлер: 662
@AdrianDragan
@AdrianDragan Жыл бұрын
Links: - Plug and play Bluetooth module + microphone: s.click.aliexpress.com/e/_DErPTy7 - Bluetooth AUX Audio Adapter with Microphone Handsfree: s.click.aliexpress.com/e/_DFsvCNv - Bluetooth Module Stereo AUX-IN Audio Adapter: s.click.aliexpress.com/e/_DF2f3lz - Bluetooth Module RCA Stereo AUX-IN Audio Adapter: s.click.aliexpress.com/e/_DE3GQex - Diagbox / Lexia 3 / PP2000 (choose the most expensive, it's the best): s.click.aliexpress.com/e/_DDoo8O5 - Quick Splice Terminals Connectors: s.click.aliexpress.com/e/_APS3lF - Radio removal keys: s.click.aliexpress.com/e/_DlT9q6F - Peugeot & Citroen Radio RD4, RD43, RD45 wiring diagram (pinout): diyrepairs4car.blogspot.com/2020/05/peugeot-citroen-rd4-rd43-rd45-wiring.html
@tajsam9412
@tajsam9412 9 ай бұрын
Hi Adrian, i installed plug and play module and after i turn off car i still can connect to bluetooth. Is that ok, does it drain battery? Thanks.
@AdrianDragan
@AdrianDragan 9 ай бұрын
Hello. Don't worry, it won't drain your battery. If you want the bluetooth to stop being powered after you stop the engine, you will have to power it from the lamp bulb in the glove box.
@leblackdogpubsaintaignan29
@leblackdogpubsaintaignan29 2 жыл бұрын
Bloody brilliant mate. Took eight months to get around to it and literally three minutes to do and working without any further issues. Nice one. Thanks.
@herrkriegel
@herrkriegel 4 жыл бұрын
Great video, really helped me a lot. Only difference was that on my Citroen C4 RD4 radio there was no cable on pin 11 so I used pin 15 instead and it worked. Hope it helps someone. Cheers
@drkabajt
@drkabajt 4 жыл бұрын
Same thing on my P308 with RD4. I discovered that pin 15 is +12V switch so I used it
@DavidxDuruelo
@DavidxDuruelo 4 жыл бұрын
It happens the same in my Peugeot 308SW. Yellow wire is in pin 15. Pin 11 is empty.
@DionisisMaximum98
@DionisisMaximum98 4 жыл бұрын
In my Citroen c5 2010 is number 8. Also you need to keep it plugged in the radio to see which cable is the 12v
@MagnusAndersen1996
@MagnusAndersen1996 4 жыл бұрын
Trying this now, hope it works !
@Geintje22
@Geintje22 3 жыл бұрын
@@DionisisMaximum98 this is why I couldn’t find my switched 12v thx!
@ciapekgaming3463
@ciapekgaming3463 Жыл бұрын
Thanks! Very helpful video, installed my bluetooth yesterday following your guide, took about 15-20min (my quick splice didn't worked at first time, i had to took isolation from wires and it worked)
@HenrikCarlJohanPeltonen
@HenrikCarlJohanPeltonen 4 жыл бұрын
Thanks Adrian, your videos are really helpful; I just installed my module yesterday following your guide.
@eyeanim
@eyeanim 2 жыл бұрын
The Aux1 tip saved my day! Thank you.
@takoulas1978
@takoulas1978 3 жыл бұрын
i just installed mine and everything works fine without using diagbox. Thank you
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. That's great! Your radio already has the Aux IN function activated.
@BenjaminGillesgillben
@BenjaminGillesgillben Жыл бұрын
Super Video, hatte mir auch solch ein BT Adapter geholt und mich gewundert dass es nicht funktioniert, wusste nicht dass man den Eingang freischalten muss. Funktioniert super. Danke
@torque5070
@torque5070 10 ай бұрын
Wie genau haben sie es denn freigeschaltet? Sie haben aber nicht das Gerät dafür gekauft oder ?
@BenjaminGillesgillben
@BenjaminGillesgillben 10 ай бұрын
@@torque5070 Sie benötigen die Citroen Diagbox ( Software ) und ein Auslesegerät für den Laptop (Lexia 3), oder mal bei einer Citroen Werkstatt nachfragen, ob die das freischalten können :).
@torque5070
@torque5070 10 ай бұрын
@@BenjaminGillesgillben ich habe schon einen aux Ausgang im Radio. Das müsste also bei mir ohne diese Software gehen nehme ich an
@maryevans6923
@maryevans6923 2 жыл бұрын
Great video and very instructional. I used your link to purchase and now have functioning bluetooth and can now hands free call using siri on my phone. Also the music playback from my phone through the radio is awesome. However I did have to enable Aux1 using Diagbox. Many thanks Adrian.
@Michael-ks2yi
@Michael-ks2yi Жыл бұрын
Quick question, do you need the original citroen diagbox to use manual configs or can 3rd party like 50$ knockoffs work the same?
@miquelgr6018
@miquelgr6018 4 жыл бұрын
Great tutorial, thanks. Is it mandatory to run the Diagbox configuration? I already see the "Input" option in the radio when clicking at "Source" button??
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hi. If you already see "Input" when you press the Source button, the function is activated and you probably have the RCA plug in the glove box. Check it out :)
@C4BLACK1
@C4BLACK1 Ай бұрын
Would it be possible to connect as AUX2 without removing the white plug by adding the new module to pins 1, 2 and 7 (AUX2) as shown in the diagram? So I think I could keep AUX1 for calls and steering wheel control with the original Bluetooth (AUX1) and the new module just for transferring music (AUX2).
@AdrianDragan
@AdrianDragan Ай бұрын
Hi. I haven't tried, but I think you can't go wrong if you try.
@bienioPOP
@bienioPOP 27 күн бұрын
Is it works?
@andresurena_
@andresurena_ Жыл бұрын
Hi there! Thanks for your generosity, what is the software and cable your using?
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. The software is called Diagbox and it only works together with the dedicated OBD module. You can buy the set here, it contains software and the OBD module: s.click.aliexpress.com/e/_DDoo8O5
@gogokitanovski9679
@gogokitanovski9679 Жыл бұрын
Hi Adrian, great video. Is there any way to activate the aux channel without the diagbox? I connected it but it doesnt show up on the radio as an option. Cheers
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. So far I have only activated using the original Diagbox diagnosis. So I can't confirm that it works with other diagnoses.
@florinzembre1791
@florinzembre1791 4 жыл бұрын
Salut, stima pt tot ce faci chiar e foarte util
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Multumesc pentru aprecieri :)
@Omega900
@Omega900 7 ай бұрын
I know this is an old video now, but in my case there is only one out of the 4 speakers that is working with this.. otherwise on radio/cd everything is fine .. any clues, tips or ideas ?
@AdrianDragan
@AdrianDragan 7 ай бұрын
Hello. The Bluetooth module transmits on left / right stereo channels, so not independently on each channel. It is possible that the bluetooth audio signal send to you radio only one channel (left or right) and that your car has a defective speaker on a certain part. Check from the radio menu, fade and balance each individual speaker.
@DannyK.-yy5oq
@DannyK.-yy5oq Жыл бұрын
I did it as in your vid in my 207cc. Unfortunately the tacholights are off now. Has that something to do with the auxconnector?
@schanet1232
@schanet1232 Жыл бұрын
Oui, vérifier les fusibles
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. I don't know if it has anything to do with it, but it would be good to check the fuses.
@pgmduno
@pgmduno 11 ай бұрын
Hello. I don't understand the differences betwen the 4 first link in the description. It's 4 items from aliexpress but they are differents ? Complementary ?. I have a citroen C5 2009 without bluetooth and i'd like to put it in. If i buy the first link is it OK ? TY
@AdrianDragan
@AdrianDragan 11 ай бұрын
Hello. Hello. Does your car have two red and white RCA plugs in the glove box? Like this: peugeotpartsdirect.co.uk/wp-content/uploads/unnamed-file.MP3.jpg
@pgmduno
@pgmduno 11 ай бұрын
Hello. No i don't have these@@AdrianDragan
@pgmduno
@pgmduno 11 ай бұрын
It"s a citroe C5 2009
@AdrianDragan
@AdrianDragan 11 ай бұрын
@@pgmduno Hello. This is the right module for your radio: s.click.aliexpress.com/e/_DCFgPAV
@rooli3
@rooli3 2 жыл бұрын
Great video, Question i have a citroen c6 from 2007. is it possible to install this on my radio? and which parts do i have order? thx
@AdrianDragan
@AdrianDragan 2 жыл бұрын
Hello. Do you have the same type of radio? If you have the same kind of radio, you can install and I recommend this bluetooth module: s.click.aliexpress.com/e/_DFOLxuR
@marcinbiesiekierski8431
@marcinbiesiekierski8431 Жыл бұрын
great video! In my citroen c4 I have a problem with enabling the aux function in the diagbox. When I select aux1 - convectional and select telecode, I get an error: wrong telecoding. The best thing about my diagbox is that I can make changes in the car, but if I want to change something on the radio, e.g. the continent, the same error pops up. what could be the reason?
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. Have you tried another version of the Diagbox software? What Diagbox version are you using? There is also the possibility that the ability to code something on multimedia is blocked from the factory.
@lahnaxd
@lahnaxd Жыл бұрын
Have you faced this issue? I am having problem configurating aux1 or aux2.
@qvoffka
@qvoffka Жыл бұрын
Nice video. +12 with key is not pin 11 but the on close to constant +12V (pin 12). Check with voltmeter and radio attached (otherwise there will be different voltage).
@SamiKankaristo
@SamiKankaristo Жыл бұрын
Exactly. The wire colors were different for me, but the ones you listed are correct (pin 12 for +12, and pin 16 for GND).
@debras.2211
@debras.2211 4 жыл бұрын
Hi,Adrian. Can i install bluetooth and aux and include both in the diagnostics. Because it seems to me that they have two connectors
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hello. I haven't tried to install both at the same time, but I think this can be done.
@debras.2211
@debras.2211 4 жыл бұрын
@@AdrianDragan Thanks for answer.
@bleaks3080
@bleaks3080 Жыл бұрын
hey great video i had a few questions so first of all does this change the quality of the original speakers? Do the steering wheel controls still work after installation? and the last one can it be done with all types of suitcase?? thank you very much great video :)
@timinigi
@timinigi 4 ай бұрын
Thank you, this is a great video! But i have a question, I don't have old 32bit windows notebook anymore, neither windows computer at all to run Diagbox software and don't want to buy this expensive diagnostic module and old computer (compare to pretty cheap bluetooth module itself) just to enable aux option on my car screen, what are my other option for this? Is there a single device diagnostic computer that can do this? Or do I need to find local mechanic that can help me?
@AdrianDragan
@AdrianDragan 4 ай бұрын
Hi. The diagnostic software runs on Virtual Machine, so it also works on Windows 10, 11. I think there are other diagnostic systems that can activate the AUX IN function, but I have not tested them. I think you can go to a local garage for aux activation.
@rosi57575
@rosi57575 4 жыл бұрын
When spliced this way will it work when the ignition is off but the radio is switched on from its power button?
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hello. I don't think it will work.
@rosi57575
@rosi57575 4 жыл бұрын
@@AdrianDragan I searched for a wire that gets 12V when only the radio is on but couldn't find one so I did it using the one you showed. Thank you for the great video!
@RenanSCstratocaster
@RenanSCstratocaster 8 ай бұрын
Question: I'm sad to find out that when using Bluetooth this way to play music, I can't control the phone through the steering wheel controls, the same thing with the radio unit controls. I can only skip /pause etcc, directly on my phone. It's annoying for me because I am frequently changing songs... can I enable the steering wheel to control the Bluetooth device? Context: Due to this video I confirmed that t the previous owner of my Citröen C3 1.1 2011 had already installed this Bluetooth module 😊. I have the stock radio and I want to upgrade it with an aftermarket screentouch unit (single din carplay type screen/radio) so I was messing around and found that module connected. I haven't figured out yet how to install the new touchscreen radio I bought I'll keep using the stock radio for now especially since I found out it has Bluetooth on it.
@AdrianDragan
@AdrianDragan 8 ай бұрын
Hello. It is true that using that bluetooth module you cannot skip the songs or adjust the volume on the phone. Have you bought a dedicated Android unit for your car?
@cedriccaro5214
@cedriccaro5214 3 жыл бұрын
Hi, thx a lot for this tutorial. Just a question, the module turn off when you turn off the car ? Because when I turn off the car, my smartphone still connected to the bluetooth module and I don't want any problem with my car battery.
@cedriccaro5214
@cedriccaro5214 3 жыл бұрын
Ok, I fix it. On my Citroën C4 2007rd4 .. pin 11 and not pin 12 for the red wire (+) , because bt module is directly connected on the car battery , pin 11 is 12v too but working only when rd4 turn on.
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. Yes, one of the two wires can be controlled by ignition.
@debras.2211
@debras.2211 4 жыл бұрын
One more question. The screen and radio work,but the screen does not show any changes on the radio: radio station, volume,....
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hello. I don't quite understand what you mean. Did you install the bluetooth module and on the screen you no longer displayed volumes, the name of the radio station?
@debras.2211
@debras.2211 4 жыл бұрын
@@AdrianDragan No, I still don't have any radio response to the screen without any module. On the screen I can now see only the consumption, range, average speed... And I have all the control of the screen using the lever behind the steering wheel and three buttons on the screen
@AdrianDragan
@AdrianDragan 4 жыл бұрын
@@debras.2211 I think your screen needs to be configured to work with the original radio, this can be done using the Diagbox interface. Your car may not have had the original factory radio, so the screen has been set to work without it.
@debras.2211
@debras.2211 4 жыл бұрын
@@AdrianDragan Can a little more detail about digitbox. Can I do it alone or go to the service?
@AdrianDragan
@AdrianDragan 4 жыл бұрын
@@debras.2211 You need this hardware / software interface and some knowledge of what to do: www.aliexpress.com/item/32835110498.html?aff_platform=shareComponent-detail&sk=_ASSIR3&aff_trace_key=91917703c48e41f2be0c143a2f20f4dd-1609275726009-02086-_ASSIR3&terminal_id=d92441f0a7b94ef29dcdfc816a4dd068&tmLog=new_Detail If you don't know how, it's better to go to a service.
@Plutus1976
@Plutus1976 9 ай бұрын
Nice video, this aux in bluetooth audio won't cancel the hands free bluetooth from origin?
@AdrianDragan
@AdrianDragan 9 ай бұрын
Hello. I think it won't cancel the original bluetooth.
@mikeburnett3988
@mikeburnett3988 4 жыл бұрын
Hi Adrian. Just to ask, I have a 2010 Citroen C3 Picasso and the stereo does not have Bluetooth. The tutorial is great but do I need to configure the stereo if I fit this. It is a Bosch stereo that comes as standard. Many thanks.
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hi! Yes, you need to configure the radio to activate the Aux IN function as you see in my clip.
@gm5240
@gm5240 10 ай бұрын
Hello Adrian, great video. However, I'm facing the same issue as others have mentionned. Pin 16 is OK. But I have no pin 11, nor 15. I have a pin 12 but it goes directly to the battery (no ignition). Is there another particular pin to check? C5 X7 2008 RD4 N1 MP3 02 Thanks in advance!
@AdrianDragan
@AdrianDragan 9 ай бұрын
Hello. That pin for ACC power is missing on some cars because the radio is turned on via the Can system. You can power the Bluetooth module from the + wire of the lamp in the glove box, extend the cable until there. Usually the lamp in the glove box works together with the ignition on.
@gm5240
@gm5240 9 ай бұрын
@@AdrianDragan OK, will check that out. Thanks!
@ranger7650
@ranger7650 Жыл бұрын
Great video. My 207 has original aux rca cable in glovebox. Can i just unplug that from radio and plug in bluetooth module without diagbox?
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. 1. You can install a Bluetooth adapter with RCA plugs directly in the RCA plug in the glove box and power it from the lighting lamp in the glove box: s.click.aliexpress.com/e/_DFIZnVP 2. You can install a Bluetooth module with an adapter in the Radio power socket and you will also have a microphone for bluetooth handsfree calls: s.click.aliexpress.com/e/_DFDFV7j If you have already activated the Aux IN function when you press the Source button on your radio, it is no longer necessary to activate it with Diagbox.
@ranger7650
@ranger7650 Жыл бұрын
@@AdrianDragan thanks, i tried using rca cable to phone but the audio quality was awful. I'll try bluetooth adapter from radio socket
@SheepWrestlers
@SheepWrestlers Жыл бұрын
Great video, how do you skip tracks, play and pause etc? Do the buttons on the radio unit work for that?
@AdrianDragan
@AdrianDragan Жыл бұрын
Hi. With this simple Bluetooth mode you can not take a skip or break using the radio buttons, only from the phone you can do this.
@dzoni97a
@dzoni97a 2 жыл бұрын
This mod with mic + Bluetooth sounds amazing, but where will I answer the calls? Only via phone or there is possibility to insert buttons somewhere in the car, like on the steering wheel, or even better somewhere on the radio?
@AdrianDragan
@AdrianDragan 2 жыл бұрын
Hello. With this bluetooth module you can only answer calls from your phone.
@dzoni97a
@dzoni97a 2 жыл бұрын
@@AdrianDragan thanks for the answer! Still way better than talking via phone 😄
@enzi7717
@enzi7717 3 жыл бұрын
Hello Adrian, thanks for you video tutorial. I have a question for you about the settings, after I installed a bluetooth module and it works, I don't have the sound. I need to setting my car stereo as you made in tutorial, but I don't know how do that. I did go to meccatronic shop but they say: only citroen affiliates car workshop have the software that can do it. I see you in tutorial did it, can you help me, please?
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. Yes, you must activate the AUX IN Function using that Diagbox interface cable. You can do this too if you buy an interface and install the software on your laptop, you can find a link in the description of my video.
@fokacsbass
@fokacsbass 2 жыл бұрын
Hi. My RD4 already has the white plug and a black plug as well, but in my glove box there is no aux input. Do you know why ? Should I change the white plug or the black plug in this case? It's Peugeot 807 2008
@AdrianDragan
@AdrianDragan 2 жыл бұрын
Hello. You have part of the wiring that is connected to the radio jack, but you don't have the RCA jack to connect the AUX IN Audio and probably the function is not activated in the Radio either. You must connect the Bluetooth adapter to one of the sockets in which there is a white or black plug.
@mariuszluks3191
@mariuszluks3191 3 жыл бұрын
you can change the song using the radio or just on the phone display
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hi. You can change the song only using the phone.
@uygar84
@uygar84 4 жыл бұрын
I see in the software there is Auxillary input 1 and Auxillary input 2. Does that mean we can install an aux cable (which you removed) and aux bluetooth (which you connected) at the same time?
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Theoretically you can also activate AUX IN 2 but the pins are different. Follow the diagram from the link, Part B: diyrepairs4car.blogspot.com/2020/05/peugeot-citroen-rd4-rd43-rd45-wiring.html
@uygar84
@uygar84 4 жыл бұрын
Adrian Dragan Thank you for the response. Do you know any audio products sold for AUX INPUT 2? (cable or bluetooth)
@davidbolha
@davidbolha 4 жыл бұрын
@@AdrianDragan Hi, What about just having both the BlueTooth as well as the AUX cable connected to the same AUX 1 connector ? 🤔😕 Thanks &... Best Regards,
@AdrianDragan
@AdrianDragan 4 жыл бұрын
@@davidbolha I don't know if it's good to combine two sound sources on the same cable.
@AdrianDragan
@AdrianDragan 4 жыл бұрын
@@uygar84 I am sorry but I do not know.
@Salman-sc8gr
@Salman-sc8gr 9 ай бұрын
The original white plug you disconnected,what was its function?
@AdrianDragan
@AdrianDragan 9 ай бұрын
That cable was for the Aux audio input, but my car didn't have the complete cable to the glove box, that's where the Aux IN rca audio jacks should have been.
@homer8ball
@homer8ball Жыл бұрын
Hello, thanks for your vid!! Now i have mine installed, just to confirm, with this module, when i play music from the music app in my phone, there is no way to skip tracks with the car radio or steering wheel buttons right? Thanks again!
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. With this bluetooth module you can only change the music from the phone.
@homer8ball
@homer8ball Жыл бұрын
@@AdrianDragan thanks for answer, i got a solution for this, u can buy multimedia bluetooth controller for phone that u can attach to the steering wheels so u can change tracks without touching the phone 😉
@RawbLV
@RawbLV Жыл бұрын
If the radio unit is disconnected, won't it ask for code upon starting? Cause I don't have the code.
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. If you disconnect the radio, you will not need the code when reconnecting.
@DywanTv
@DywanTv Жыл бұрын
Hello. I have another question. I have connected module as shown in the video and radio and screen above the radio is not working. AC, lights etc. is working ok. I have used splicers like yours, but mine were smaller. Is it possible that the splicer completely cut off ground and +12 V? Would it cause screen stop to work? The bluetooth module can be seen in my phone when the ignition is on, but radio and screen dont work. If you could help me I would be very very grateful.
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. If neither the radio nor the screen works, it is possible that one of the cables is cut.
@DywanTv
@DywanTv Жыл бұрын
@@AdrianDragan Hello, it was te fuse fault.
@st.giorgos
@st.giorgos 3 жыл бұрын
Hi Adrian. Nice videos. I have a DS3 with the type A screen (simple type) and no bluetooth. What is the easiest and cheapest way to connect a mobile to the car stereo with microphone? Is there a dongle/adaptor or do I have to change the screen and radio together?
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hi. This is the easiest module to connect, but for him you have to activate AUX IN usibg Diagbox if it is not already activated: www.aliexpress.com/item/32826594463.html?aff_fcid=8dd412c5ed964f848eb1ce1226169bf6-1622123674255-09622-_AlNrnv&aff_fsk=_AlNrnv&aff_platform=shareComponent-detail&sk=_AlNrnv&aff_trace_key=8dd412c5ed964f848eb1ce1226169bf6-1622123674255-09622-_AlNrnv&terminal_id=a4886d1a72584241b5df38394da27292&tmLog=new_Detail
@st.giorgos
@st.giorgos 3 жыл бұрын
@@AdrianDragan thanks for the reply. Some reviews say that this product uses the battery even after the car is turned off.
@AdrianDragan
@AdrianDragan 3 жыл бұрын
@@st.giorgos If the power cord connections are made on the positive wire controlled by the ignition switch you will have no problem discharging the battery. To be sure you have to check the positive wire if it still has current after you stop the engine, use a multimeter. In fact, if the bluetooth module is still available after you have stopped the engine, it means that it is continuously powered.
@lucasesteban23
@lucasesteban23 2 жыл бұрын
hello!! good video, I wanted to know if that module has a microphone for when you answer calls?
@AdrianDragan
@AdrianDragan 2 жыл бұрын
Hi. This is module with microphone for calls : s.click.aliexpress.com/e/_dUYqCGe
@rredipss
@rredipss 4 жыл бұрын
Hello. Do you have a film about replacing nomade module? Or maybe how to remove center tunnel?
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hello. I'm sorry but I don't have a film about replacing nomade bluetooth module. I don't even have a film about how to center tunnel, but I want to do it in the coming weeks. Thanks!
@rredipss
@rredipss 4 жыл бұрын
@@AdrianDragan I found your film about replacing a bulb in lighter. Some say that i can remove nomade thru this hole :-) i'll check it tommorow :-) thanks for reply
@AdrianDragan
@AdrianDragan 4 жыл бұрын
@@rredipss That hole is small, I don't think you can get out there but you can try.
@titoviera3011
@titoviera3011 4 жыл бұрын
Great video, Just i was looking for
@davidbolha
@davidbolha 4 жыл бұрын
Me too. 😇😆
@chema8169
@chema8169 4 жыл бұрын
Thank you!! One of the screws fell through the obd hole, do you think it could be dangerous? :s
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hello. There is no danger. I also dropped the screw there, I even dropped an OBD bluetooth adapter :))
@alvarooliveira2469
@alvarooliveira2469 Жыл бұрын
I have a peugeot rcz, does this also work in my car? thanks
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. If you have the same type of radio it should work. I recommend this Bluetooth adapter: s.click.aliexpress.com/e/_DdZlxEb
@pan_prezydent
@pan_prezydent 3 жыл бұрын
Hi! let me know that using the Lexia to programming this bluetooth module to correct using with phone is required or not? how to use this one module without Lexia? Should I just switch my radio to AUX and try to use? (Citroen C5 2005)
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. If you already have the AUX function active in your radio, you no longer have to configure with Lexia / Diagbox.
@pan_prezydent
@pan_prezydent 3 жыл бұрын
​@@AdrianDragan ok, I just connected BT module and will try to find someone who have Lexia. Thank you!
@28102650
@28102650 7 ай бұрын
I haven't started doing anything yet. I haven't even ordered anything as I'm still at the research stage. My first question is what year model Peugeot 3008 are you demonstrating this on, please? Then you showed having the Bluetooth module permanently powered. What would be the benefit of doing that? And finally, the display screen on my 3008 seems to have only 3 columns for displaying information. If I'm going to add Bluetooth, wouldn't I need an extra column (or something else) in order to configure the Bluetooth connection? If not, why not? Thanks for any help you can provide.
@AdrianDragan
@AdrianDragan 7 ай бұрын
Hello. 1. The car I made the video on is a 2008 Peugeot 308. 2. There is no advantage. You can power the bluetooth module from the wire of the radio unit that has + ACC (conditional on turning on the ignition) or you can power it from the + of the illuminated glove box lamp. 3. You just have to configure the radio (using Diagbox Peugeot diagnosis) to accept Aux IN audio.
@dimitrijevisnjic9880
@dimitrijevisnjic9880 3 жыл бұрын
Hello Adrian,i bought this adapter connect wires everythink is ok and activated by lexia,but i have problem sometimes adapter always connect and disconect from the phone and i heard beep sound.What you think what is problem,somethimes working ok but sometimes not.
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. Try another phone and see if the same thing happens. It is also possible that the bluetooth module has a problem.
@dimitrijevisnjic9880
@dimitrijevisnjic9880 3 жыл бұрын
@@AdrianDragan i tried with other phone same problem maybe is fault bt adapter...
@oliviersnguyen3843
@oliviersnguyen3843 2 жыл бұрын
Hello I have a 308 1.6 HDI 2009 , But when I press on SOURCE nothing is happening , how can I enable AUX IN pls ? Is your method with this adapter is still available and working in 2022 ? And also , can I use any diag box (like the 40€ 300€ ALEN diag box on AliExpress) to modify the parameters of the Bluetooth please ? Thankkssss
@AdrianDragan
@AdrianDragan 2 жыл бұрын
Hello. Yes, you must activate the Aux IN function using the Diagbox with the dedicated module. You can find the link in the clip description.
@fchichois2250
@fchichois2250 4 жыл бұрын
Thanks very much, extremely useful and interesting. 2 questions 1/ is it compatible with a Peugeot Partner tepee > 2005? 2/ can I use my phone, make and receive calls through the loudspeakers?
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hello. 1. If you have RD4 type radio, you can use bluetooth module. 2. You need this set to use your car speakers to hear phone calls: www.aliexpress.com/item/32826594463.html?aff_platform=shareComponent-detail&sk=_dUYqCGe&aff_trace_key=db34bffd454f43fdb5fa402529657ea7-1601095775499-07313-_dUYqCGe&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail
@DywanTv
@DywanTv Жыл бұрын
Hello, I have a question. If my Peugeot 308 has two RCA inputs (left and right side) in glove box and I can see "AUX" option in my source menu is it necessary to use Diagbox after installing bluetooth module just like you did in the video?
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. Because you already have the AUX IN port active, you no longer need to do the activation with Diagbox.
@DywanTv
@DywanTv Жыл бұрын
@@AdrianDragan Thankl you for the fast answer
@cjatkinson6213
@cjatkinson6213 8 ай бұрын
Hi, if I remove multi changer cd , do I need to activate the aux using diagbox
@koppanyagrillokozmary162
@koppanyagrillokozmary162 4 жыл бұрын
Hi, I have a 2009 C4 picasso with rneg wipnav with rca aux in. I would like to change the rca aux to a bt like in your video. Do you have a pinout description for rneg wipnav? Does it have the same pinout like the rd4? Thansk
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hi. If I'm not mistaken pinout for aux in is identical, you can still use a bluetooth module with RCA connection: www.aliexpress.com/item/32821770160.html?aff_platform=shareComponent-detail&sk=_AN7CU1&aff_trace_key=4b445306f5ff4aedaf24f41b551629cc-1603835577839-07973-_AN7CU1&terminal_id=77944c4ce01745aba668c8702a5739a3&tmLog=new_Detail
@koppanyagrillokozmary162
@koppanyagrillokozmary162 4 жыл бұрын
@@AdrianDragan Thank you for your answer. Is the +12V/-12V pinout also the same? :)
@AdrianDragan
@AdrianDragan 4 жыл бұрын
@@koppanyagrillokozmary162 Yes, but it's good to check.
@IanOcampoPodRider2016
@IanOcampoPodRider2016 3 жыл бұрын
Thank you! Very informative, I appreciate your work!
@felixbott939
@felixbott939 Жыл бұрын
Hello is the step with the Diagbox necessary or will it work with the AUX setting I already got on my 308
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. If you already have AUX active in the menu when you press the SOURCE button, the Diagbox step is no longer necessary.
@felixbott939
@felixbott939 Жыл бұрын
@@AdrianDragan thanks for your answer, I only have aux 2 in my menu, would this work too ? And where’s the difference between aux 1 and aux 2
@Bombka007
@Bombka007 4 жыл бұрын
Will bluetooth module will be powered only when ingnition is ON, or also when ignition is OFF but radio is turned ON manually?
@AdrianDragan
@AdrianDragan 4 жыл бұрын
As I made the connection here, the bluetooth module only works with the ignition ON.
@christophe8292
@christophe8292 3 жыл бұрын
Hello Adrian, thanks for the video which gives ample time to follow each step. What module should I get for a Peugeot 807, year 2008? thanks a lot!
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. This would be the easiest module to install. But make sure it is compatible with the radio jacks on your car. www.aliexpress.com/item/32826594463.html?aff_fcid=8dd412c5ed964f848eb1ce1226169bf6-1622123674255-09622-_AlNrnv&aff_fsk=_AlNrnv&aff_platform=shareComponent-detail&sk=_AlNrnv&aff_trace_key=8dd412c5ed964f848eb1ce1226169bf6-1622123674255-09622-_AlNrnv&terminal_id=a4886d1a72584241b5df38394da27292&tmLog=new_Detail
@GregDravenActor
@GregDravenActor 3 жыл бұрын
I have the exact same car. Which module did you get? Do your parking sensor beeps still work?
@alialnoori3
@alialnoori3 2 жыл бұрын
Bonjour, tout d'abord merci pour ces vidéos utiles. J'ai une question. Est-ce que cette pièce fonctionne sur Peugeot 308 2009, notez que ma voiture n'a pas de aux
@AdrianDragan
@AdrianDragan 2 жыл бұрын
Bonjour. Cela fonctionne également sur votre voiture, mais vous devrez activer la fonction Aux IN sur votre radio à l'aide des diagnostics Diagbox comme vous pouvez le voir dans mon clip.
@alialnoori3
@alialnoori3 2 жыл бұрын
@@AdrianDragan Merci beaucoup 🌺🌺🌺
@TamasKoos199753
@TamasKoos199753 4 жыл бұрын
Hello Adrian! Great video. I have only one question. Can you use the radio's buttons to skip between songs using this module?
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hello! For this bluetooth module the radio buttons cannot be used to change the track. But with this usb music player you can do whatever you want, see also my video from the link below: www.aliexpress.com/item/4000259485934.html?aff_platform=shareComponent-detail&sk=_dZb5IAb&aff_trace_key=0a20b206f9554695a0fc66cdf0ebd312-1595739885153-02248-_dZb5IAb&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail&aff_request_id=0a20b206f9554695a0fc66cdf0ebd312-1595739885153-02248-_dZb5IAb Tutorial: kzbin.info/www/bejne/a2PLpnuPlLZgqMk
@jasim6808
@jasim6808 3 жыл бұрын
Hi! I bought the plug and play module that is in the description. But the bluetooth continues on even if I turn off the contact. Is it a problem for the battery??
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. Theoretically there is no problem because the consumption for this module is very low. But if you want it to stop when you turn off the engine, I recommend to connect the power supply for the module to the cables that supply the bulb light in the glove box, it has current only when the ignition is on.
@YS_Production
@YS_Production 2 жыл бұрын
Hi. Couldn't you leave the original AUX cable connected and set this bluetooth device as AUX 2 in the diag box? Or is it not possible to have 2 AUX ins with RD4? Thanks!
@AdrianDragan
@AdrianDragan 2 жыл бұрын
Hello. You can enable both Aux ports, but the bluetooth module pins are set to Aux 1 only.
@westfale2
@westfale2 2 жыл бұрын
Someone know which pins do I have to use at a Peugeot 3008 2012, are they the same?
@AdrianDragan
@AdrianDragan 2 жыл бұрын
Hi. If you have RD4 radio it's the same.
@bubel9102
@bubel9102 Жыл бұрын
Hi, i bought the same bluetooth module, but i have a problem to activate aux (I have a citroen C4 2005). I do the same as you in diagbox but when i change a input from missing to convetional diagbox shows me "wrong telecoding". It also shows this for every option to change on the radio. Do you have any idea to solve this problem? Old diagbox version, blocked radio etc.?
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. I guess it's a radio stuck to changes in the Diagbox, I've also had this problem sometimes without knowing how to solve it.
@stefanmiric1155
@stefanmiric1155 3 жыл бұрын
Hi friend, i have a fabric bluetooth module and i use this for a call audio. Can i codding bluetooth for play media audio?
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. That bluetooth can only work for calls.
@nixon7027
@nixon7027 3 жыл бұрын
Hi, what do you think about sound quality? is it the same? Thanks.
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. The sound quality is very good but it is possible that the volume is a bit lower.
@nicolasmacchiavello8201
@nicolasmacchiavello8201 4 жыл бұрын
Hi i have a peugeot 307 with rd4 radio, and i installed the aux cable in port 1 and enabled with lexia and worked perfectly until the cable broke. Can i have this bluetooth module installed in port 2 and have both aux active? I mean the aux cable in port 1 and the bluetooth in port 2 both working or bluetooth in port 1 and aux in port 2 but both working fibe with the source button?
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hello. I haven't tried to activate and use both Aux ports so far, but theoretically it should work.
@nicolasmacchiavello8201
@nicolasmacchiavello8201 4 жыл бұрын
@@AdrianDragan thank you very much for your reply!, and do you know how it should be done in case i choose aux port 1 and bt port 2?
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Select using the "Source" button on radio or from the steering wheel controls.
@nicolasmacchiavello8201
@nicolasmacchiavello8201 4 жыл бұрын
@@AdrianDragan oh sorry for the misunderstood, i meant how should be done the bluetooth wire thing for port 2, or it is the same to put in one port or another with the guide of the video?
@AdrianDragan
@AdrianDragan 4 жыл бұрын
@@nicolasmacchiavello8201 I don't remember if the plugs and pins are identical, check in the link with the wiring diagram in the clip description.
@mazz7254
@mazz7254 Жыл бұрын
How is the quality of the sound ? Like cd and radio ?
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. The audio quality is like a CD, but with a slightly lower volume. Anyway, it's very good.
@Fido_Dido1
@Fido_Dido1 4 жыл бұрын
I have bought the package @ Ali. Unfortunately my P308 2007 has only a wire at pin12 in the connector. Pin 11 is empty. This means the module will always have power, even when the ignition is turned off. This will drain the battery if you do not use the care for a longer period of tim. ADVICE: If you consider purchasing the device, check if you car audio system used the right connectors first.
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hi. You can power the bluetooth module from the positive wire of the lighter.
@UNUSUALWRLD
@UNUSUALWRLD Жыл бұрын
is there any problem if i have aux 2 instead of aux 1? thanks
@AdrianDragan
@AdrianDragan Жыл бұрын
Hi. You should try it and see if it works. If not, activate Aux 1.
@marchiegalorio5751
@marchiegalorio5751 6 ай бұрын
Hi may i know if this is compatible to a 2010 citroen grand c4 picasso?
@AdrianDragan
@AdrianDragan 6 ай бұрын
Hello. Yes, it is compatible with your car.
@marchiegalorio5751
@marchiegalorio5751 6 ай бұрын
@@AdrianDragan thanks mate ☺️
@schanet1232
@schanet1232 Жыл бұрын
Quelle tension volt a besoin le module Bluetooth Biurlink svp ? Ford transit 2007 radio 6000 CD
@AdrianDragan
@AdrianDragan Жыл бұрын
Hi. 12 volts.
@schanet1232
@schanet1232 Жыл бұрын
Merci @@AdrianDragan
@nash1338
@nash1338 3 жыл бұрын
Hi Adrian, great video! How good is the quality over Bluetooth ya? I'm audiophile nitpicking here but is it noticeable vs aux cable only connection? Can we have aux 2(3.5mm only) and aux 1 for Bluetooth? I also saw some online with a microphone to be put into the 3.5mm port connected to Bluetooth. Can we still play music on that?
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. The audio quality is good but the volume level is lower.
@nash1338
@nash1338 3 жыл бұрын
@@AdrianDragan wow thanks for the super quick reply! Is it lower with cable or Bluetooth?
@nikolazi99
@nikolazi99 Жыл бұрын
Hello, any way to do this on a car that has only AUX 2 enabled? I'd love to avoid the hassle of finding someone who can program it for me
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. Does your car have AUX IN RCA ports in the glove box? If so, you can install the bluetooth module from the link and power it from the lamp in the glove box: s.click.aliexpress.com/e/_DD4Ngqr
@nikolazi99
@nikolazi99 Жыл бұрын
@AdrianDragan hello, my module has finally arrived. I ordered the same one as in the video. I had no luck with quick splice connectors so I joines the wires manually. The sound on AUX 2 is very quiet and distorted. Could the possible bad wiring cause such an issue or is my module maybe at fault? Best regards and thank you if you spare some time to answer!
@AdrianDragan
@AdrianDragan Жыл бұрын
@@nikolazi99 Have you tried with AUX 1? some users said that on AUX 2 the sound was not good but on AUX 1 it sounds good.
@nikolazi99
@nikolazi99 Жыл бұрын
@@AdrianDragan That could be the issue, sadly I have no way of enabling aux 1 for now :/ Thanks for the response!
@DywanTv
@DywanTv Жыл бұрын
Hello @@AdrianDragan Do you have any tips on how to power this kind of adapter from lamp in the glove box?
@Drake-sl8jd
@Drake-sl8jd 8 ай бұрын
Hello, I have a peugot 207 with aux audio source (you can connect trought a RCA wire in glove box) would I still need diagbox to enable it? Thanks
@AdrianDragan
@AdrianDragan 8 ай бұрын
Hello. You no longer need AUX activation if you already see AUX when you press the SOURCE button. You can buy a module that connects directly to your RCA jacks: s.click.aliexpress.com/e/_DmJoJlf
@olafwojtas4081
@olafwojtas4081 4 жыл бұрын
Is it safe? The module won't burn while using like cheap FM transmiters?
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hello. It's safe for me and it doesn't burn anything.
@olafwojtas4081
@olafwojtas4081 4 жыл бұрын
@@AdrianDragan Thanks
@camilobecerril2372
@camilobecerril2372 3 жыл бұрын
Amigo! La calidad del audio del Módulo bluetooth en comparación con la calidad de audio del reproductor de discos como es? Es igual o mejor?
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. The sound quality is very good, the sound volume is a bit slower.
@emadabdalla9072
@emadabdalla9072 3 жыл бұрын
Thanks for your video, but how to get the software to activate the aux system?
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hi. You need this: www.aliexpress.com/item/4000060579009.html?aff_fcid=07b1756aa6234348b0db731145bbabf2-1636066688100-04434-_AO3jCx&tt=CPS_NORMAL&aff_fsk=_AO3jCx&aff_platform=shareComponent-detail&sk=_AO3jCx&aff_trace_key=07b1756aa6234348b0db731145bbabf2-1636066688100-04434-_AO3jCx&terminal_id=364d159dab6d4da48c68657f8054a5c8
@siciliano61
@siciliano61 5 ай бұрын
is it compatible with remote of wheel? volume + volume - next back source
@AdrianDragan
@AdrianDragan 5 ай бұрын
Hello. Using this bluetooth module you have no control from the controls on the steering wheel, you can only adjust the volume.
@Babaguidai
@Babaguidai 4 жыл бұрын
Great Video, thank you . But I have a problem with mine, I followed every step in your tutorial, but I don’t have the same color of cable from my cable. So I just connect the black wire of the BT adapter to the cable on pin 16 and the red wire to the one on the pin 11. Did everything right on diagbox, the entry auxiliary number 1 is activated, but when I click on source I get nothing. Can you please help me.
@Babaguidai
@Babaguidai 4 жыл бұрын
I can finally see the input aux 1, but no BT to connect on. Seems like the adapter is not powered on, But I did connect on the socket, the adapter black wire to the pin 16 and the red one to the pin 11. What did I do wrong, Please Help
@AdrianDragan
@AdrianDragan 4 жыл бұрын
@@Babaguidai Hi. Is strange. Try to power the bluetooth module separately from another 12v source. See if after powering it you will find in the list of bluetooth devices in the phone menu.
@Babaguidai
@Babaguidai 4 жыл бұрын
Adrian Dragan I will try that then
@arkosol
@arkosol 3 жыл бұрын
Hi, can you skip songs by using car controller under wheel?
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. Yes, you can skip songs using the controls under the steering wheel.
@AdrianDragan
@AdrianDragan 3 жыл бұрын
I'm sorry, I didn't see that this is a bluetooth module. You can't skip music tracks.
@81roleta
@81roleta 3 жыл бұрын
hello thank you for the video, have installed on my 207 but if the volume is on max it disconnects from the phone and keep trying to connect do you have any idea?
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. I'm sorry but I haven't heard of this problem yet. However, tell the seller about the problem maybe he has an idea.
@DJ-np5vp
@DJ-np5vp 3 жыл бұрын
Can't thank you enough as I have many tips and info for my car from you. How could connect a computer/laptop to the car? Where I could buy a cable?
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. You can buy the cable adapter and software from Aliexpress (choose the most expensive, it's the best): www.aliexpress.com/item/4000077945226.html?aff_fcid=3f393039cd76437ca5be168bf88085cb-1621346233730-00705-_AfwDRP&aff_fsk=_AfwDRP&aff_platform=shareComponent-detail&sk=_AfwDRP&aff_trace_key=3f393039cd76437ca5be168bf88085cb-1621346233730-00705-_AfwDRP&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail Thanks!
@miranpolanc8572
@miranpolanc8572 3 жыл бұрын
Hi Where do you get this software? I was at the original service and we were unable to connect. Peugeot 308, 2008
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hi. This is a 10 year old software, but I still can't activate the Aux IN function on some radios and I don't know what the problem is.
@miranpolanc8572
@miranpolanc8572 3 жыл бұрын
@@AdrianDragan od kot ste?
@AdrianDragan
@AdrianDragan 3 жыл бұрын
I'm sorry but I don't understand what you mean...
@miranpolanc8572
@miranpolanc8572 3 жыл бұрын
@@AdrianDragan where are you come from?
@hammerhead9096
@hammerhead9096 3 жыл бұрын
Can you tell me what version of Diagbox you use in the Vid Thanks.
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hi. This is an old version v6.19
@srdjanpetrovic4140
@srdjanpetrovic4140 4 жыл бұрын
How do I wire the adapter so it turns on when the radio is turned on? (My radio can be turned on even when the ignition is off).
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Connect the bluetooth red wire instead of pin 11 to pin 12 (Pin 12: battery +12 volt powered radio). See the wire diagram in the link: diyrepairs4car.blogspot.com/2020/05/peugeot-citroen-rd4-rd43-rd45-wiring.html
@srdjanpetrovic4140
@srdjanpetrovic4140 4 жыл бұрын
@@AdrianDragan so that way, the bluetooth adapter won't be turned on unless i turn on the radio first? Or is the adapter always on in that case? Sorry for being annoying btw :)
@AdrianDragan
@AdrianDragan 4 жыл бұрын
The bluetooth adapter will be turned on continuously, even when you leave the car and turn off the radio. The chances of the battery draining are small because it consumes very little energy.
@srdjanpetrovic4140
@srdjanpetrovic4140 4 жыл бұрын
@@AdrianDragan I understand, thank you for helping me
@pufika
@pufika Жыл бұрын
If it's permanently powered won't it kill the battery?
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. It won't ruin the battery.
@pufika
@pufika Жыл бұрын
@@AdrianDragan thanks for the feedback 😁
@sasek555
@sasek555 Жыл бұрын
i have activated aux when i unplug my aux cable and ill pin bluetooth module i need to activate it again?
@AdrianDragan
@AdrianDragan Жыл бұрын
The activation of AUX in will remain active in the Source menu.
@RadiYahia
@RadiYahia 3 жыл бұрын
Thank you for this!!
@SevenTheTraveler
@SevenTheTraveler 3 жыл бұрын
I have a citroen c4 b7 with a RD510 radio, will this work too?
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. I don't know what to tell you because I haven't tested it on RD510.
@ernestgrigoryan
@ernestgrigoryan 3 жыл бұрын
Hola Adrian, con esta instalacion se pueden seguir utilizando los controladores (subir bajar volumen, cruise control,etc) detras del volante?
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hola. Todavía puede usar los controles del volante y cruise control.
@carloscasares2308
@carloscasares2308 3 жыл бұрын
Hola Adrián! Quería saber si es posible que el Bluetooth se encienda solamente cuando esté en input 1 Es posible? O si o si cuando el stereo está encendido? Ya que no quiero estar escuchando la radio y que el Bluetooth siga encendido. Muchas gracias
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello! I'm sorry but I don't understand your question. Can you ask me in English?
@carloscasares2308
@carloscasares2308 3 жыл бұрын
@@AdrianDragan Hi Adrián! I want to know if it's possible that the Bluetooth module only turns on when I put the source on aux 1. Because I don't wanted to be always ON. So if I'm listening to the radio or a CD, the Bluetooth is off. Thanks!
@AdrianDragan
@AdrianDragan 3 жыл бұрын
@@carloscasares2308 Hello. It is not possible, the bluetooth module only turns off when you turn off the ignition, otherwise it is on even if you are not in Aux IN mode.
@nicolasmacchiavello8201
@nicolasmacchiavello8201 4 жыл бұрын
Hi Adrián, i installed it following the steps of your video and it works great, only problems with pairing but i downloaded an app and it worked. The only problem is that i connected it to pin 12, because i haven't got a pin 11, and it is always on, taking a lot of battery even though the car enters in eco mode. There is another cable that only allows it when the ignition is on or i have to install a switch or something?
@AdrianDragan
@AdrianDragan 4 жыл бұрын
Hello. Use a multimeter to find a wire that is powered on the ignition. You can also find a + wire in the light from the glove box that is powered when the ignition is turned on.
@nicolasmacchiavello8201
@nicolasmacchiavello8201 4 жыл бұрын
@@AdrianDragan thank you very much i found a cable that works with the ignition on, is from the esp button that my car hasn't got it. I connected it and it shuts off when i turn off the car but it pairs with the phone and then gets disconnected, and then connects and disconnects. Could it be that this cable of the esp button hasn't enough power to keep it working properly or something?
@AdrianDragan
@AdrianDragan 4 жыл бұрын
I think that cable from ESP has low voltage, I think it is more suitable to supply from a wire of the lamp from the glove box.
@nicolasmacchiavello8201
@nicolasmacchiavello8201 4 жыл бұрын
@@AdrianDragan i'm gonna change it! Thank you very much!
@nicolasmacchiavello8201
@nicolasmacchiavello8201 4 жыл бұрын
I connected it to the positive glove box light wire and i think it's working fine!, thank you very much for your help and congratulations for your videos, they help a lot!. Regards from Uruguay
@luisr9532
@luisr9532 3 жыл бұрын
Hola Adrián muy buen video una consulta ése módulo bluetooth sera compatible con radio Siemens vdo rcd4 12-30 que viene en mi citroen c4 sedan diésel saludos desde Chile
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hola. Sí, es compatible con su radio. Saludos desde Rumania :)
@7085Chris
@7085Chris 3 жыл бұрын
Many thanks Just installed the module and it works great. The only issue I'm having is that Pin 11 was not switched live so currently connected to pin 12 battery which is not ideal. I had a good probe across the entire switch couldnt find a switched live which seems abit odd. Peugeut 407 SE
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. Try to power from the positive wire of the lamp in the glove box.
@kplayer5318
@kplayer5318 Жыл бұрын
Would it work with display type A??
@AdrianDragan
@AdrianDragan Жыл бұрын
Hello. Yes, it also works with display type A.
@nutnaa
@nutnaa 3 жыл бұрын
This module is working all the time, even if you turn the ignition off? On my vw t5 is like that, module keeps on blinking
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hi. Yes, but the consumption is so low that even after 3 weeks it will not drain the battery.
@nutnaa
@nutnaa 3 жыл бұрын
@@AdrianDragan true, but I’m now worried about battery, I’m worried about that thing getting warm and burn my van
@AdrianDragan
@AdrianDragan 3 жыл бұрын
@@nutnaa You can connect to a wire that has current only when the ignition is on, see the cables that supply the lamp in the glove box.
@blablabla4606
@blablabla4606 4 жыл бұрын
Thank you Adrian very good video I installed Bluetooth
@fabsalvideo
@fabsalvideo 5 ай бұрын
Thanks for the video. The device it's ok for my Citroen C3 MY 2010, red cable on the yellow, black cable on the yellow/green. DiagBox not necessary in my case the AUX input was already ok. Radio RD4N1 M-03 Continental, you can manage the volume from steering button but the main control is from the phone, I have a Samsung .
@AdrianDragan
@AdrianDragan 5 ай бұрын
Hello. I'm glad it works well for you.
@ngabi1103
@ngabi1103 3 жыл бұрын
Hi and thanks for the video. I ordered and installed one myself and configured it on a local dealer. One thing it that is happening and I don't really know why. When I turn up the volume (level 30) or the bass (level 9) all the way up it disconnects. It also happened to disconnect and I couldn't even connect to it anymore (it didn't show up) and I had to remove it from the socket and put it back in. Any thoughts on why is this happening?
@AdrianDragan
@AdrianDragan 3 жыл бұрын
Hello. I have no idea why this is happening, I think it could be a weak thread connection in the mode, but I'm not sure.
@ngabi1103
@ngabi1103 3 жыл бұрын
@@AdrianDragan I checked it and there is no thread issue visible. However, I don't mind it that much, but it's inconvenient. Thanks for the response :D
Блютуз в Ситроен с5х7, RD4.
8:10
Забудь PRO Сервис
Рет қаралды 10 М.
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
Peugeot 508 Install 7 Inch Android Multimedia 508 (Original LIKE)
26:42
Подъем в ледяную гору. Китай против Quattro
15:32
Поднебесный Гараж
Рет қаралды 2,1 МЛН
Install Android Multimedia Unit on Peugeot 407
24:47
Adrian Dragan
Рет қаралды 626 М.
Radio with Aux = Bluetooth Audio
9:13
CSCondeMotor
Рет қаралды 118 М.
ПЕЖО 308 установка Bluetooth адаптера на магнитолу
7:29
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН