Retrofit Cruise Control Peugeot 308, 307, 207, 407, 3008, Citroen, install and activate with Diagbox

How To Install Cruise Control Peugeot 308, 307, 207, 407, 3008 / Citroen C3, C4
Links:
- Cruise Control Switch: s.click.aliexpress.com/e/_Dm8...
- Diagbox / Lexia 3 / PP2000: s.click.aliexpress.com/e/_DdU...
Tutorial piloto automático Peugeot
Installazione e configurazione cruise control
Retrofit of Cruise Control Peugeot Citroen
Nachrüstung und Freischaltung des Tempomat (Cruise Control) im Peugeot Citroen
Installation du régulateur / limiteur de vitesse sur Peugeot
Установка круиз-контроля / лимита на Peugeot
Cum sa instalezi Pilot Automat (Cruise Control) Peugeot
Retrofit and Coding Cruise Control Peugeot Citroen
OE Codes for Cruise Control stalk:
- Cruise Control and Speed limiter: 6428Z8
- Cruise Control: 6428Z9
Peugeot 207: KFW, KFT, 8FS, 8FR, 8FP, 5FW, 5FK, 5FS, 8HP, 8HR, 8HZ, 9HV, 9HZ, 9HV, 9HX, 9HR
Peugeot 208: ZMZ, HMW, HMZ, HMX, 8FP, 5FS, 5FV, 5FU, 8HP, 8HR, 9HR, 9HD, 9HP, 9HK, 9HJ
Peugeot 308: 8FS, 8FP, 8FR, 5FW, 5FS, 9HY, 9HX, 9HR, 9HP
DISCLAIMER - This modification, if carried out is the of responsibility of those carrying it out, not that of myself (the author) or youtube.com
Comment, Thumbs up, Share, and Subscribe!
➢ If you like, you can BUY ME A COFFE: paypal.me/adioperator?locale....
➢ Facebook Page: / adrian-pgt-diy-repairs...
➢ TikTok: / adrianpgt
MY OTHER KZbin CHANNELS
➢ Skoda Volkswagen Audi Seat Tutorials: / justacar
➢ Dacia Renault Tutorials: / @adriandrnro
Music:
Tomorrow's a New Day by SAINNTSET / sainntset
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/tomorrows-a-new-day
Music promoted by Audio Library • Tomorrow's a New Day -...
********************
DISCLAIMER
Some of the links are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help support this KZbin channel and allows us to continue to make videos for you. Thank you for your support!

[@JohnB-2021]

Excellent Video, just fitted my cruise control switch and programmed it today after watching this video. The local dealer told me it couldn't be done. Now I want fold in mirrors lol.

[@AdrianDragan]

Electric folding is a much more complicated job: you need special mirrors, a computer, cables ...

[@JohnB-2021]

@@AdrianDragan Hi, I took my right hand door panel off, right hand drive, to find the power wire for the heated mirror. I wanted to see if the 'myth' that the 'heated mirrors come on during a regeneration' was true. They do together with the heated rear screen. With the door panel off, I found a spare brown plug with 2 wires that run to the control switches, it was next to the 6 wire mirror plug. Today I fitted a fold back mirror, programmed the bsi and fitted a second hand mirror / window control with 'fold in' function button. It works. I am yet to do the left passenger side. I assume it does not need an extra plug because there is no temperature sensor on that side. I assume all the 6 wires will include a NS fold back mirror. I thought I would tell you since you helped with my cruise control. JB UK

[@blablabla4606]

@@JohnB-2021 Hi if you want folding mirors i can sent you a scheme if you have 308 you need only 2 pins to right miror two pins come from window controler with folding

[@JohnB-2021]

@@blablabla4606 Thank you Samuel, I bought the switch, fitted drivers side folding mirror, plugged it in and it worked. Ran a twin core wire to passenger side and connected other mirror.

[@blablabla4606]

@@JohnB-2021 Hi can you sent me video on messenger samuel Klč person on photo have you 308 ?

[@pticapolska9292]

Have been fighting with it for a few months. Job done. Thx. From Poland as well:)

[@TheDevilek1983]

Great job - regards from Poland.

[@MazookDK]

PERFECT video. That's how you do it. Great job! 👍

[@AdrianDragan]

Thanks!

[@ahmedzouaoui9515]

Thank you freind the best lavoro♥️

[@antonioquarto6723]

Ciao ti seguo sempre e mi vedo tutti i tuoi video sei molto in gamba vorrei fare tutto anche sulla mia 308. Grazie continua così

[@tk-su2qr]

Bravo domnule,urmăresc ceia ce faceți e super

[@AdrianDragan]

Multumesc pentru aprecieri 🙂

[@alessandroprisco3450]

Hallo Adrian and thanks for all your great work. I own a van Fiat Scudo 2007 that is, in fact exactrly the same as a peugeot expert or citroen jumpy: same chassis, internal, engine ecc. And the switch and all other stuff in my van are exactly the same i can see in you video So: do you think i can use the same software/hardware you have used or is neccessary the fiat one? Thank you very much Alessandro

[@user-oc9jd5by3o]

I think it will. Be helpful if you make a video for 307 . A lot of us would like to inform how to install cruise control . Best wishes!

[@AdrianDragan]

Hi. It's exactly the same with the Peugeot 307, the only difference is that you have to cut the window from the steering column cover to insert the lever. Thanks :)

[@MrX-ys2cd]

Are you using Windows 7 32 or 64 Bit? Great video, thank you! :)

[@MadsRehhoff]

Thank you. Works for 207sw also :0)

[@tb8573]

Mads, what kind of cable did you use between the laptop and the 207 SW OBD-outlet?

[@avram177]

Felicitari in cea ce faci,expici super fain...

[@AdrianDragan]

Multumesc!

[@boris8911]

Nice Video with sub title it is very helpful!

[@AdrianDragan]

Thanks :)

[@RazvanBenchea]

Great video! Do you know if it's possible to retrofit the cruise control on a 206 1.4 petrol year 2007. It has the 2 wire switch on the clutch pedal and the 4 wire switch on the break pedal. Thank you

[@AdrianDragan]

Hello. I think it should work, but I can't guarantee it. The only way to find out is to try :)

[@jesuscabrera6757]

Muchísimas gracias, por fin lo he conseguido gracias al vídeo, lo intente por mi cuenta y llevo 2 años intentando que me funcione y en menos de 10minutos que tiene el vídeo por fin lo he instalado y me funciona!!! muchísimas gracias!!! 🥰🥰🥰

[@AdrianDragan]

Hi, I'm glad to hear that ;)

[@aliiyadtedjini7792]

Hola,como lo has hecho? A mi no funciona en 407sw 2005 lo he instalado activado pero en carretera no va,saludo

[@jesuscabrera6757]

@@aliiyadtedjini7792 lo explica muy bien, solo que en español, pone otra cosa en vez de configuración pero sí que lo pone de otra manera, pero tienes que al final encontrar lo mismo que le sale a él, comprueba que tienes los cables de freno y embrague y ya te digo que funciona perfectamente porque yo me he estado peleando muchísimo y al final lo he conseguido, gracias a este vídeo tiene que salirte las mismas pantallas o parecidas a las que le salen a el dependiendo de la versión del diagbox

[@aliiyadtedjini7792]

Que cables? Y cuantos hilos? El embrague también??

[@jesuscabrera6757]

@@aliiyadtedjini7792 sale en el vídeo

[@g_webb21]

Hi, great video. Quick question about another thing. If I buy 15" hubcaps (I've got a 2011 Peugeot 207 with 15" tyres) will they fit? They say it fits 207SW 2008 etc but do you think they'll go on the standard 207?

[@AdrianDragan]

Hi. I'm not sure if it fits, but if the rims are the same (in shape) then it fits.

[@razvanursache9493]

Am făcut asta în urmă cu aproape un an la Citroen-ul c3 al meu din 2006. Funcționează perfect în afară de limitatorul de viteză deoarece nu am butonul de sub pedala de accelerație.

[@AdrianDragan]

De aceea am preferat sa nu fac si activarea limitatorului pentru ca nu functioneaza cat timp nu ai acea pedala cu "kick down".

[@jbn37]

@@AdrianDragan salutare. Tocmai ce am achizitionat un Citroen C2 din 2006, 1.4i (73 cp), cutie Sensodrive (robotizata). Ma bate gandul sa ii pun maneta de CC. Din moment ce este Sensodrive, banuiala mea este ca are atat switch-ul de frana cu 4 fire, dar si "click-ul" de la acceleratie (pentru kick down).

[@AdrianDragan]

@@jbn37 Salutare. Nu stiu sa-ti spun concrt daca va merge pentru ca nu am instalat CC pe masina cu CV automata. Cred ca merita sa incerci, probabil va functiona.

[@antonklaassen8490]

Great video, I'm going to perform it on my 207 cc. You should get some gass tho ;)

[@RizkiFikriansyah]

Did you do it? If you did, do you have any advice, because I have the same car, mine is from 2010 though, and I'm about to do it, next time I'm free.

[@antonklaassen8490]

@@RizkiFikriansyah Yes it works fine, mine is from the same year! There are some small defiations though. First, when installing, like the video said, you have to cut a slit in the steeringwheel cover in order for it to fit properply. Secondely, the Diagbox differs a bit from the video, at least with mine. It occured at the end and didn't cause any troubles though and it was pretty straightforward how I had to continue. It works great and I use it quite often now! The installing and activation of the cruise control took about 15 minutes eventually. I hope this helped a bit, and have fun!

[@ntelas46]

What cables should I look for if the car is automatic?

[@antonklaassen8490]

Hey, when I tried to configurate the cruise control (CC) in the diagbox, from the step followed by ignition/injection, the options were different than that of the video. When I trried to continue with the steps that looked most like the one in the video, I came to a whole different screen asking me about a complete ECU change. At this point I just closed up the programm and tested the CC. Everything worked except for the car to actually activate the CC function. Meaning it did recognise the arm, and when standing still, it also recognised I pressed the button to start the CC, after which telling me I needed to go faster, like in the video. Also when reaching 80 km/h, the '- - - ' on the screen started flashing, but nothing happened. Do you know how to resolve this? The car in question is a Peugeot 207 cc 1.6vti, 2010.

[@AdrianDragan]

Hello. Try to make a diagnosis with Diagbox and see if there is any error about CC. On some cars you just can't activate this CC function or it doesn't work, I don't know what the problem would be.

[@antonklaassen8490]

@@AdrianDragan Hey thanks for your reply, I just tried to go further with the other screen and eventually it worked! I guess the problem lay with other car models having different settings from the same make of a car. So thanks for the help with the video!

[@robertowiski]

@@antonklaassen8490 What exactly have you done to spot flashing when trying to activate CC?

[@maxlmthebest]

This is true love..i love you

[@dansorescu5720]

Cel mai util video pe subiect, pe care l am găsit online. Aștept să văd dacă se poate și la mine pe un Berlingo multi space. Salutări din Timișoara!

[@AdrianDragan]

Salut! Mulțumesc pentru aprecieri. In proporție de 90% eu zic ca merge 🙂

[@dansorescu5720]

@@AdrianDragan cu plăcere! Din ce am observat la pedale, fara să demontez ceva, se vad contactele, deci ar trebui sa funcționeze. Singura chestiune ce poate nu ar funcționa, din ce zicea mecanicul, e funcția de limitare, dar nu mă deranjează.

[@AdrianDragan]

@@dansorescu5720 Posibil ca limitatorul sa nu functioneze, dar crede-ma ca eu nu l-am folosit niciodata la masinile mele.

[@dansorescu5720]

@@AdrianDragan te cred, de aia nici nu mă interesează funcția respectivă.

[@dansorescu5720]

@@AdrianDragan am fost ieri la mecanic. A montat maneta, o vede pe bord, dar nu se cuplează, rămânând pe off. A zis sa mai incercam la Peugeot să vadă din softul mașinii daca pot face setările necesare

[@barbosdarius272]

salutare adrian este oare posibil cumva sa schimb viteza minima de activare a cruise control ? peugeot 308 2009

[@Fofino72]

Great job! I have a 3008 last model with only cruise control. In your opinion is it possibile to install the adaptive cruise control? Thanks

[@AdrianDragan]

Hi, thanks! You need several hardware parts (radar, wiring, lever, etc.) coding to make at the dealer, etc. All these end up being very expensive ...

[@Fofino72]

@@AdrianDragan I imagined it was very complicated and expensive.... thanks

[@user-yg6nq9lw5g]

Hi! Don't you also need an electric gas pedal for the cruise control to work?

[@AdrianDragan]

Hi. Each car has an electronic gas pedal, so you don't need another.

[@markusgri9615]

IT works with the following Numbers 6,7,8 of the VIN: 207: KFW,KFT,8FS,8FR,8FP,5FY,5FW,5FK,5FS,8HP,8HR,8HZ,9HV 9HZ,9HV,9HX,9HR 208: ZMZ,HMW,HMZ,HMX,8FP,5FS,5FV,5FU,8HP,8HR,9HR,9HD,9HP,9HK 9HJ 308: 8FS,8FP,8FR,5FW,5FS,9HY,9HX,9HR,9HP Original Peugeot List

[@Selim70007]

My current car is 207 from 2007-06. 5FY. Not on this list. But I have seen the same 5FY on another car with Cruise Control.

[@markusgri9615]

I add it

[@PaulBissekerBushcraft]

Thank you so much :-)

[@PaulBissekerBushcraft]

Peugeot Expert TePee 1.6 2009. Diagbox 7.57 btw

[@yanikrastinin4424]

Hi my friend I have a Citroen dispatch 2013 2.0 hdi do you think it will work I haven't checked yet the switches.Just asking if you did that on a dispatch?

[@AdrianDragan]

Hello. I think it works, but first check to see if you have those switches.

[@jezior_lca]

Just did it in my 407 and cruise control works well. Limiter is not working cuz my acceleration pedal has no button. Now my next goai is to snipe a pedal with that button in a deacent price :)

[@AdrianDragan]

Hi! I have on my Peugeot cruise and limiter from the factory, I used the speed limiter only twice to see how it works 😅. I don't know if the effort to buy another pedal is worth this speed limiter function.

[@jezior_lca]

@@AdrianDragan I use the limiter very ofthen in the city when I drive other cars. Pedal replacement is super easy so if I find one used in a good price than why not get it :)

[@AdrianDragan]

I understand. It is useful to you.

[@emilkabakov8348]

Top....

[@MenTallisT_96]

Doamne, nu credeam ca este posibil asa ceva pe un peugeot 307.. Chiar zilele astea ma voi ocupa de achizitionare si instalare. Chiar imi doream o astfel de optiune. Sa vedem acum, daca e compatibila si cu masina mea.. Multumesc frumos

[@AdrianDragan]

Salut! Din ce an este masina ta?

[@MenTallisT_96]

@@AdrianDragan 2007

[@AdrianDragan]

@@MenTallisT_96 Trebuie sa mearga fara probleme 🙂

[@MenTallisT_96]

Multumesc de informatie ^^

[@alessandromichele3124]

Hi AdrianDragan congratulations for the video! I would like to install it on my 2009 Fiat Scudo van, it is the same as the Peugeot Expert and Citroen Jumpy, I have 4 wires on the brake pedal and on the board where you insert the 8-pin contact lever. I wanted to ask you if you can use Diagbox or do you need another software? From what I see can I mount an 8-contact lever?

[@AdrianDragan]

Hello. Software activation can only be done with a software dedicated to your Fiat car, probably the original software. I'm not sure you can do this using the Diagbox software on your Fiat car.

[@alessandromichele3124]

Thank you very much, on some English forum I read that they used a fiat shield diagbox by selecting Citroen Jumpy, I don't know if it has all the functions, however I saw that the light switch is marked Peugeot Cirtoen .... I would like to be sure before buy diagbox because maybe it doesn't work, anyway thank you very much for the advice!

[@rushymoto]

I have 2009 Citroen C2 hdi. I installed the stalk control. I have not checked the pedal switches yet. My plastic cover has no cutout for the control. Was the C2 ever sold with this option? Can I buy the lower plastic cover with the correct hole?

[@AdrianDragan]

Hello. If you had a place to put the lever for cruise control, it means that it is very likely that your car was also sold with cruise control from the factory. You can cut into the steering wheel cover for the lever.

[@rushymoto]

@@AdrianDragan I have right hand drive car. I looked on pedals and saw a 2 wire switch for clutch. It has a rod to send brake pedal onto left side of car and parts book shows brake switch is on left side away from pedals. I have not seen yet how many wires on brake switch. I will play with my diagbox I got from eBay tomorrow. Thanks.

[@MyEnzo2001]

Hi Adrian. My 308 is missing a button on the volume stick. I have a 307 that I’m selling. Can I swap the volume controller sticks from to 307 to the 308 as they are the same, and do you know if it will require any coding or should just plug and work? Thank you! Your videos help me a lot.

[@AdrianDragan]

Hello. You can replace the steering wheel controls, no coding is required.

[@MyEnzo2001]

@@AdrianDragan yes! It worked thank you

[@franciscosanchez2163]

Hi Adrian, i have a problem. When trying to activate the second pass, diagbox (in cruise control RVV1) shows abstent, and no possibility of change at present. Any idea? Thank you for the video.

[@AdrianDragan]

Hello. I have encountered such problems before and it seems that this option is blocked in the car software from the factory.

[@agustinpetruccelli3885]

The same happened to me, but it let me put present in RVV2, and it worked!

[@gambats]

Hello! I just installed the control on my 2003 307sw. It worked for few km and then nothing. Few days later I disconnected the battery before starting up, and it worked again for about 8km... Any guess what could be the fault? Looks like something goes wrong when car gets hot. THANKS!

[@AdrianDragan]

Hello. I don't know what the problem might be. Try removing the Cruise Control lever and putting it back on. Make a diagnosis with Diagbox, you may find an error.

[@OPeugeotdoDiego]

Meu amigo boa tarde eu falo diretamente da terra tupiniquim vulgo Brasil. Estou aqui para agradecer as suas informações neste vídeo facilitou em muito os caminhos para que eu pudesse fazer o serviço no meu carro e também gravar conteúdos aqui para o KZbin eu vou deixar o seu vídeo em anexo ao meu como indicação de vídeo sugerido, parabéns quando puder vou assistir outros vídeos seus. Um grande abraço.

[@AdrianDragan]

Thank you for your appreciation. Good luck there too!

[@ionutvalentin5148]

Salut poți sa faci tutorial cum readaptezi clapeta accelerație 407 1.8 16v cu diagbox

[@javiermerino9328]

Salutare Adrian! 😀, Me encantan tus videos y he hecho todo lo que muestras por internet en mi Peugeot 308, incluida la „Superradio“ 😀. Me gustaria ponerle el piloto automatico, pero no tengo ninguna diagbox. Me podrias decir como la puedo consegir, donde comprarla con el adaptador OBD2 y el software para mi Peogeot 308?. Me harias un gran favor si me puedes ayudar. Estoy fascinado con las cosas que haces. Muchos recuerdos desde Alemania Javier

[@exrizz]

Hi! A few years ago I've installed this to my 408, successfully enabled both cruise control and speed limiter, but speed limiter failed after a while. Ended up just enabling only cruise control. Any idea why this happens?

[@AdrianDragan]

Hello. I don't know what the problem would be, run a dedicated Peugeot diagnosis and see if any errors appear.

[@Pop_Leonardo]

Which diagbox did you bought? Because the link to ali has 3 different packs Thank you:)

[@AdrianDragan]

Hello. Choose the version "Full Chip No Clip Cable" www.aliexpress.com/item/32996051032.html?pvid=071638e3-c40f-47a9-867b-5e9b3e1db354&aff_platform=link-c-tool&sk=lOyJt0Da&aff_trace_key=50713291a34f406db1570ba3ea0e1cf4-1605973040965-06586-lOyJt0Da&rmsg=do_not_replacement&scm=1007.23534.123999.0&terminal_id=77944c4ce01745aba668c8702a5739a3

[@Pop_Leonardo]

Thank you! :)

[@juicythedj750]

Can this be done with the "lite" version of the Diagbox unit or do I need the "full chip" version? I have a 2015 Peugeot Partner Teepee. Thank you!

[@AdrianDragan]

Hi. You can usually do the activation with the lite version as well.

[@juicythedj750]

@@AdrianDragan Thanks! in the meanwhile, I've come to understand that the "full chip" version supports the later v9 Lexia software which is probably gonna be easier to install/use. I'll go with the modern version just to be sure :)

[@juicythedj750]

​@@AdrianDragan thanks again for the advice! I got cruise control/limiter working like a charm

[@agustinpetruccelli3885]

Thank you for this video. With it I could install the cruise control in a 307 2006. Do you know how to setup the speed limiter too? I tried but I got an error that say something like “defective speed limiter”. I kept only de CC activated, but it could be great to have both options. Thanx!

[@AdrianDragan]

Hi. From my experience I can tell you that I have almost never used the limitation function, only twice to see how it works.

[@agustinpetruccelli3885]

@@AdrianDragan yeah, it’s something very rare to use, I agree. But I dont want a switch not working there. How do u made it work?

[@agungyuliyantonugroho]

If my car automatic transmission/al4 its will work?my brake pedal switch has 4 wires but no clutch pedal...

[@AdrianDragan]

Hello. I haven't tested on automatic transmission cars, but I think it should work.

[@kakasvk]

Can it be activated with Delphi or Autocom as well? If so, where exactly can it be found in settings? My car mechanic has Delphi and Autocom diagnostic, not the one you use.

[@AdrianDragan]

Hello. I haven't tried with Autocom or Delphi, so I don't know if it works to activate the function.

[@victorlima1296]

Do you know if it works on a 206 look year 2007? Great video!

[@AdrianDragan]

Hello. Check that you have the contacts on the clutch pedal and the brake pedal. If you have them, it will most likely work on your car as well.

[@Sigve100]

Hello! Do you know how to remove the cruise control stalk once it has been installed? Mine was faulty and i need to replace it with a new one. Thanks!

[@AdrianDragan]

Hello. I'm not very sure but I think there are two pins that lock the lever in its support. Those pins should be unlocked and the lever should be able to be removed.

[@Sigve100]

@@AdrianDragan Thanks for the reply! I got it out. If anyone is having this issue there is a pin on the left side of the stalk that you can push in, then you can slide it out. I actually got it working aswell by bending the pins on the stalk out a bit. I saw in some comments that on some 307's it won't work. I got it working on my 307 facelift version 1,6 HDI manual by doing exactly what you did in your video.

[@endurodani]

Is it possible to remove the EGR valve in the software? So I could blank the EGR valve without having fault. Thanks

[@AdrianDragan]

Hi, I do not know an answer to this question.

[@miszauvek]

Thanks. Is there an option to automatically turn on left or right fog light when turning left/right. Like Citroen C4 has.

[@AdrianDragan]

Your car must have ESP in order to have that option to turning the fog light on corners.

[@miszauvek]

@@AdrianDragan It has, Peugeot 308 2013. How to enable it?

[@miszauvek]

@@AdrianDragan I guess i have to get this diagnose tool and enable it via obd, right? Is there a manual for it?

[@AdrianDragan]

@@miszauvek The OBD diagnosis used to activate the function is purchased separately. Manual for what?

[@AdrianDragan]

​@@miszauvek The car has ESP (electronic stability program)?

[@zazademetrashvili5632]

Will it work with AT as well? And does it need same process in diagbox?

[@AdrianDragan]

Hello. I can't tell you for sure, but I think it should work.

[@Joel..01]

Which software should I choose when I buy Diagbox? V. 7.83 or 9.68? I have a Peugeot 207 from 06

[@AdrianDragan]

Hello. The version 7.83 also works for your car, for the newer cars from 2013 is required the version 9.68

[@lewisgard8490]

Will this work on a citroen relay or peugeot boxer van? Thankyou

[@AdrianDragan]

Hi. 90% will work.

[@user-us2gq2qf6t]

Hi, This video was absolutely great! I tried this myself, but during the last step, I can't configure the setting of cruise control to 'present' in the ECU. It just starts downloading and writing without me actually changing anything. Any ideas?

[@AdrianDragan]

Hello. I have also encountered this problem several times and I do not know the exact solution. Someone told me that the option would be blocked right from the factory.

[@rushymoto]

@@AdrianDragan I hope my 2009 Citroen C2 will work ok. May be if any one has a C2 1.4 hdi with cruise, some one can suck out the ECU and share it.

[@mattrehm8612]

Has anyone fitted this to a Citroen Dispatch 2009? Or any other year of the same edition? I can see on my van's display that the cruise light, and cruise speed LCD is there...

[@AdrianDragan]

Hello. It should also work on your car.

[@nikolaykrustev3679]

Thank you for the great video. Do you think ordering a cheap AliExpress Cruize Control stick is safe? can it potentially malfunction in a dangerous way during driving .. like accelerating and not letting you stop?!

[@AdrianDragan]

Hello. It's a good question, but so far I haven't heard of such problems with these levers even though they are bought from the China.

[@nikolaykrustev3679]

Thank you Adrian! I hope indeed that pedals should always override the cruize control. At least in theory they should as far as i know.

[@AdrianDragan]

@@nikolaykrustev3679 True, pressing the clutch pedal or brake stops the Cruise Control function.

[@nikolaykrustev3679]

@@AdrianDragan mine is automatic 308 turbo. This is why i worry a bit because its a drive-by-wire after all and there is a cheap cruize in the middle. Either way ... break should always work ... i think. Thank you much for your responses. Vids are great too - i’m about to install soon a 9 inch android multimedia based on your step-by-step! Very helpful indeed!! Thank you!

[@laporte2001]

Nice one. Do you know whether it would be possible to use the diagbox to upgrade a peugeot 3008-II with cruise control ACC to cruise control ACC stop and go ?

[@AdrianDragan]

Hi, No, it is not possible to activate and work these functions. In addition to the activation you need some hardware components (radar, cables, etc.).

[@laporte2001]

@@AdrianDraganHi, it's already equipped with radar & cameras: cruise control with full stop (ACC stop) and active lane-keeping assist, what would be missing?

[@AdrianDragan]

@@laporte2001 I'm sorry but I don't understand what upgrade you want to do if you already have these features enabled and functional.

[@laporte2001]

@@AdrianDragan Well, the car can make to a full stop but it does not restart by itself (which an ACC stop and Go would do). In my case the driver needs to accelerate to 30km/h to reengage the cruise control.

[@hendisucahyo]

​@@AdrianDragan Hi Adrian, great tutorial video. I Subscribed immediately. May i ask, if i have the radar, the wiring and the lever ready, can i instal and activate the ACC (on the Peugeot 3008-II/2017) with the software in the Diagbox Lexia 3 you suggested? How do i know that my 3008 car already has the function or tool installed to perform automatic brake in order to support the ACC feature? Thank you

[@marcospheitosa]

Come fare per il manuale peugeot 208 2015? La chiave di controllo cruze non ha cavi da installare?

[@robertowiski]

Hello, just configured at mu 308 2013ver, the car seems to recognized all its functions, how ever, when I try to turn on the cruise control while driving, it shows the current velocity and 1 second after it starts to blinking (an underline symbol) what could it be?

[@AdrianDragan]

Hello. In some cars, this option to activate and operate CC is blocked from the factory and will not work. Try a reconfiguration with another Diagbox version, but I can't say that it will work.

[@robertowiski]

@@AdrianDragan Thank you for the reply, is there any chance that it might work if I reset the BSI?

[@dazet75]

hallo Adrian, Is it the same way to calibrate cruise control in peugeot 206 sw 1.6 hdi 110 hP 2004 year od prod.??.

[@AdrianDragan]

Hello. It should be the same way to install in your car.

[@itaknieogarniasz]

Ill try

[@zygak56]

Hello I set according to the video but the cruse control and speed limitation option but only the speed limitation works. I wanted to program it again but I don't know how to do it.

[@AdrianDragan]

Hello. Check the settings again with Diagbox. There is also the possibility that your lever may have a defect.

[@zygak56]

@@AdrianDraganHello I chose the BSI cruise control and speed limit and not cruise control like you. Now I can't change it to missing to reprogram.

[@a.carabano]

Gracias por tan excelente video, Adrian Dragan, me ha costado mucho entenderlo por que ni conocimiento de Ingles es ninguno pero con ayuda de google lo he logrado. alguen me podria decir si un Peugeot 407 Sport 2000 HDI 136 VC del año 2005 tiene la preinstalacion del Cruise Control de fabrica, o habria que instalar todo el cableado?

[@AdrianDragan]

Hola. Creo que su automóvil tiene todos los cables instalados, deberá instalar la palanca de control de crucero y activar la función Diagbox.

[@bluerukai]

Hi, May I know 2006 citroen C3 sensodrive(not AL4) can follow this video step ?

[@AdrianDragan]

Hi! Hello, I don't know the exact answer but you can try to see if it works. I did not install Cruise control on this car.

[@monacocross4241]

how to know buy 6 pin or 8 pin cruise control handle ? for peugoet 308 2012

[@AdrianDragan]

Both versions are compatible. For your car, the best one is the one with 6 pins, the one with 8 pins also has a speed limiter, but it will not work (the limiter) because you must have a compatible accelerator pedal.

[@sayanpal9491]

It is compatible with 107?

[@rudolfskarlovskis]

if all blocks are set then is it possible to change from basic to active cruize control for peugeot 3008 2017?

[@AdrianDragan]

Hi. For active cruise control you need a front radar, an ABS pump module programmed or special for this function and many other programming and calibrations in the car software. I'm afraid it's very expensive or impossible to upgrade to this feature, and it can probably only be done at a Peugeot dealer.

[@rudolfskarlovskis]

@@AdrianDragan my car have all blocks included front radar and other things that you mentioned. It just software locked so I'm speaking about programming needed stuff via diagbox.

[@marcospheitosa]

How to do this for the peugeot 208 2015 manual? Does the cruze control key have no wiring to install?

[@AdrianDragan]

Hello! I do not know to tell you how to do in the Peugeot 208 because I haven't worked so far. Check if you have those pedal switches and if you can remove the covers under the steering wheel to see if you have support for the Cruise Control lever.

[@marcospheitosa]

@@AdrianDragan what should you actually have on the pedals?

[@kan815k]

Hi, It seems like you are a man with knowledge of peugeot. I have peugeot partner 2012 1.6 diesel. My question is - 6 or 8 pins? Clutch pedal and brake pedal have switches ? Thank you.

[@AdrianDragan]

Hello. Use the 6-pin lever. Your car probably already have those switches on the clutch and brake pedal, you can visual check if your car has them.

[@kan815k]

@@AdrianDragan Hi again, Just checked the pedals, it looks like clutch has the switch but no wires connected to it. Brake pedal have 4 wires and connected. Also open the steering coloum and for cruise control connection have 8 tabs.

[@stefanoneri4475]

posso installare un cruise control originale su una citroen xsara del 2001?

[@fdk6966]

Is compatible whit Citroën c2 thank you great video regards from spain

[@AdrianDragan]

Hi, It depends on what year your car is and if it has those brake pedal and clutch switches.

[@bendover-69247]

Thanks for the video! Finally got my diagbox to work with my car, and was seconds away from being finish, then no connection. and now , i have no dialog on anything again like before. any tips on that? Hope its better tomorrow , if so i gonna do it fast ass hell :)

[@AdrianDragan]

Hello. I'm sorry but I don't know what problem your Diagbox might have. Try to use the same USB port for the hardware interface every time.

[@tb8573]

@@AdrianDragan so you are using a USB-OBD cable between the laptop and the car?

[@AdrianDragan]

@@tb8573 Hi. I use this OBD - USB interface, together with it you will also receive the Diagbox software s.click.aliexpress.com/e/_DdAfX2J (version "FULL NO CLIP")

[@synco1985]

Salut, multumesc pentru clipurile pe care le-ai facut, mi-ai dat curajul sa-mi instalez navigatie cu android, una dintre cele mai bune investitii pe care le-am facut in masina. Acum imi fac curaj pentru a face si schimbarea din clipul asta am o intrebare off topic pentru tine, la Peugeot 207 din 2012 se poate activa cumva o functie gen cornering lighs folosind farurile de ceata?

[@AdrianDragan]

Salutare. La modele mai noi (308) știu ca se poate, din pacate nu stiu daca și la 207 e posibil. Daca masina are ESP cred ca ar fi o șansă pentru ca să se poată activa aceasta opțiune.

[@felipeandres3987]

servira para una citroen picasso 1.6 hdi 2007 ? lo otro, donde se consigue/compra ese diagbox ? saludos

[@AdrianDragan]

Holla! Creo que encaja. Diagbox se compra en Aliexpress, vea los enlaces en la descripción del clip.

[@user-ro2ps5ho3d]

Hello Adrian, thank You very much for this informative video, I have a problem I have a software Lexia 3 and pp2000, but I do not have a diagbox. What do You think without diagbox I could activate the cruise control? If not, could You send me some information, that from where I could download diagbox software? Thank You for the information

[@AdrianDragan]

Hello. I know you can do that activation using pp2000.

[@unn3norocit]

Buna, fi amabil te rog frumos si spune-mi daca ai idee daca aceasta metoda functioneaza si la VAN-uri mai exact la un peugeot boxer din 2015 2.2 HDI. Multumesc foarte frumos!

[@AdrianDragan]

Salut. In proporție de 90% ar trebui sa mearga. Totusi daca opțiunea de activare este blocata din fabrica, nu va functiona. Singura cale de a afla este sa montezi maneta și sa încerci activarea cu Diagbox.

[@gazzaoco]

Do I need extra wire or just the stalk and reprogram it

[@AdrianDragan]

Hello. You don't need any extra cable, just check if you have those switches on the brake pedal and the clutch pedal, insert the lever into the support and then you have to do the activation with Diagbox.

[@gazzaoco]

@@AdrianDragan would a good snap on diagnostic machine do be up to reprogram it

[@blackops2460]

I have installed the full Diagbox server, with updates and everything, but everytime I insert my Lexia 3 cable into the laptop, i get faillure message pop-up showing right under.

[@doman90]

Hey, what about limiter function? Which settings in diagbox should i change? "Type of CC: CC and Speed Limiter" Anything else?

[@AdrianDragan]

See in my video at 5:16 minutes, select "Cruise control and speed limitation". But, if your car does not have a switch on the accelerator pedal to unlock this limitation in case of need, it may not work properly. Anyway, my car has a speed limiter, do you know how many times I have used it? Once, to see how it works :))

[@doman90]

@@AdrianDragan isn't useful even in a city? yap i got it that i need dedicated pedal like 9650889180. will i be managed to set it up if i dont have wires in the existing electrical system? btw can i unlock it in diagbox anyway and just don't use it, just for further improvement?

[@AdrianDragan]

@@doman90 If you bought the right pedal you can try to activate the function. Let me know if it will work well :)

[@ap-mechanics]

@@doman90 hi, let me know if you successfully could aktivated the Limiter. I'm interested too.

[@tocram2]

@@AdrianDragan As a french learner driver, speed limiter is definitely a go-to. I had it on my first car, it was on pretty much every time I was driving outside of city, but sadly, some girl rear-ended me when I was stopped at a red light and I had to get another car... which happened to not have speed limiter... Well I keep surprising myself going way faster than I should without realizing :/

[@MirelSpy]

Salut,cu progamul ala pot sa scot limitarea de viteza la un peugeot partner 2014,astept raspuns,multumesc

[@AdrianDragan]

Salut. Nu am incercat si nici nu-mi amintesc sa fi vazut prin menu-ul programului o astfel de optiune.

[@axelalbistegui6509]

Hi Adrian, I followed all the steps and did the activation but I don't see it activate on the screen. It has 4 cables and I don't know what it could be ... It's a 307 1.6 2011 gasoline. Might you help me?

[@AdrianDragan]

Hello. Sometimes this Cruise Control or limiter option is locked at the factory and cannot be activated or will not work.

[@Basileus86]

Could i add ACC in ds7 crossback with sign recognition and emenrgency brake till 85km/h

[@AdrianDragan]

Hello. I haven't done such an upgrade, but I've heard it's possible. However, you will need a radar sensor, cables and other components + software coding.

[@LifeofAngga]

Hi i have a 5008 gtline 2019 i was told the adaptive cruise control was exist and disabled due to safety concern, with this tool is it possible to activate it my self and wether the software can run on windows 10?

[@AdrianDragan]

Hello. I don't think it's possible to enable adaptive cruise control with this tool, I think you'll have to go to your Peugeot dealer for this.

[@kirilbaykov6691]

Hello, I have Peugeot 307 1.6 petrol, 2002 year. DO you think that this will work to my car?

[@AdrianDragan]

Hello. Check if you have those switches on the clutch and brake pedal, if you have them you just have to try.

[@lalaslalatov5627]

Cu Lexia/PP2000 se poate activa? Care este diferenta intre Diagbox si Lexia/PP2000?

[@AdrianDragan]

Salut, Sunt aceleasi softuri, difera doar interfata. Diagbox este atat pentru Peugeot cat si pentru Citroen, pe cand Lexia se adreseaza masinilor Citroen si PP2000 Peugeot-urilor. Deci se poate activa si cu Lexia sau PP2000.

[@leanschneider8413]

Me fije y mi 307 trae tal cual los cables así, en el freno 4 pines y el embrague esta tal cual, y también me trae la.ficha debajo del volante, será que voy a poder adaptarle?

[@AdrianDragan]

Hola. Solo inténtalo, creo que funcionará.

[@PaulBissekerBushcraft]

****SPEED LIMITER**** 6:28 Bottom row! Activate it! It works too :)

[@AdrianDragan]

You may be right :)

[@GabrielSTEFAN943]

Stii cumva daca se pot pune switch-urile pt acceleratie, frana, ambreiaj pe masinile care nu le au ? Sau stii cumva ce modele ar veni fara ? Multumesc

[@AdrianDragan]

De obicei masinile mai vechi au cate un comutator lipsa, la ambreiaj cel mai adesea. La frana fie ai un comutator cu 4 fire fie doua cu cate doua fire. Masinile cu an de fabricatie pana in 2004 mai au aceste lipsuri. Totusi verifoca sa vezi ce comutatoare ai la masina ta.

[@GabrielSTEFAN943]

@@AdrianDragan Deci la un 407 este exclus sa nu se gaseasca switch-urile

[@AdrianDragan]

@@GabrielSTEFAN943 La 407 ar trebui sa ai acele switch-uri.

[@endurodani]

Is it enough to buy the diagbox lite version, or I better buy the full one? Thanks! Great videos, keep up the good work!

[@AdrianDragan]

I have not tried Lite version, however I recommend full chip.

[@endurodani]

thanks, I will buy the full chip version. Do you know a method, how to turn off the safety belt sound? Something can be done with the odo knob, but I'm not sure.

[@AdrianDragan]

@@endurodani I was not interested in disabling the seat belt warning, but I suppose it can be disabled with the help of Diagbox.

[@pticapolska9292]

Theres an option. I did it on passenger and driver side in Berlingo B9 van

[@endurodani]

Ptica Polska did you make it through diagbox? Which menu is the right one?

[@SergioProdi]

If you follow link for Lexia, you have 4 different options. What do i need for Peugeot 307?

[@AdrianDragan]

Hi! Hello! The best choice is "Lexia Full Chip no Clip Cable" .

[@lascuvlad7085]

Salut, am montat azi maneta după tutorialul tău, am verificat întrerupătorul de frână e cu 4 fire și cel de pe ambreiaj sunt ok. Acum te rog ai putea sa ma îndrumi unde sa merg sa activez cruise controlul, zona Timiș, Hunedoara ar fi bine pentru mine. Mulțumesc.

[@AdrianDragan]

Salut. Nu stiu sa-ti recomand pe cineva care face astfel de activari in zona respectiva. Ar trebui sa intrebi pe grupurile de Facebook, probabil vei gasi pe cineva.

[@jdivanov77]

I did everything and test everything and still not working. On the display I have CC OFF and 2 dashes --. Did you have any idea where is the problem? My car is Peugeot Partner Teppe 2012. Thanks.

[@AdrianDragan]

Hello. I also had this problem with two cars and I don't know where the problem is, someone from the dealer told me that the activation of the function could be blocked from the factory.

[@iCSvision]

Salut! Ai idee daca se poate schimba doar maneta responsabila cu semnalizarea si farurile? Cred ca s-a rupt ceva la ea ca e foarte sensibilă la atingere. Când semnalizez dreapta de ex dupa iau curba automat la revenirea volanului semnalizează stânga. Mulțumesc!

[@AdrianDragan]

Salut, Am vazut pe Aliexpress niste seturi de reparatie: aliexpress.com/item/32838505630.html?aff_request_id=2138eaa60f114f43bc6d04b09985338b-1582825990776-02596-_dWHVDef&aff_platform=link-c-tool&cpt=1582825990776&sk=_dWHVDef&aff_trace_key=2138eaa60f114f43bc6d04b09985338b-1582825990776-02596-_dWHVDef&terminal_id=364d159dab6d4da48c68657f8054a5c8 Nu pot sa-ti garantez ca functioneaza. As fi tentat sa probez dar maneta de semnalizare functioneaza corect la mine.

[@iCSvision]

@@AdrianDragan Mersi de răspuns! Maneta mea nu are auto la lumină. Oare se potrivește?

[@AdrianDragan]

@@iCSvision Model fara lumini automate: www.aliexpress.com/item/32817370483.html?aff_request_id=cc3e0f2cb005424f8e493e7ae84b46b0-1582830639053-02490-_d6v7xZV&aff_platform=link-c-tool&cpt=1582830639053&sk=_d6v7xZV&aff_trace_key=cc3e0f2cb005424f8e493e7ae84b46b0-1582830639053-02490-_d6v7xZV&terminal_id=364d159dab6d4da48c68657f8054a5c8

[@iCSvision]

@@AdrianDragan Mersi de ajutor! Par cam diferite la modul de prindere.

[@SuperAlbino1]

Are there any extra steps if you also want the speed limiter function?

[@AdrianDragan]

Hi. You need an accelerator pedal with a switch at the end.

[@SuperAlbino1]

In a right hand drive car would that be in the same location as the brake and clutch switches or actually on the pedal?

[@AdrianDragan]

@@SuperAlbino1 Hi. I think those are in the same location, you can check.

[@endurodani]

Hi, I installed the cruise control, and activated it in diagbox. I also see the switches are present on the pedals. But the cruise control does not work. :( might be a bad cruise control arm? thanks for your help.

[@AdrianDragan]

Hi, What car did you install it on? I encountered another problem on a Peugeot 307 2005 1.6HDI, the car had been in service and they did a software update to the engine computer, that update blocked the operation of cruise control.

[@endurodani]

@@AdrianDragan it's a Peugeot partner tepee 2008 1.6hdi, the newer version of Peugeot partner. It has a 4 wired brake pedal switch. The cruise control arm I bought is the same, that you installed in the video. Maybe one without speed limiter function could work? Or one with the memo function and with 8 poles? (The other ones have 6 poles)

[@AdrianDragan]

@@endurodani I don't know what to say, try another Cruise control arm without limiter or memory.

[@endurodani]

@@AdrianDragan ok. I will let you know if I can solve this problem.

[@finley123321]

endurodani hi Did you ever solve this I have the same issue

[@MaciScott]

Hi. Will this work with VAG KKL cable?

[@AdrianDragan]

Hi. No, only with dedicated Peugeot / Citroën cable.

[@marcospheitosa]

Please help me install on my 208 2015

[@blackops2460]

Hi Adrian, I have bought the cable to connect to my car and installed Diagbox V9.91, But when I plug in my usb to the car and connect, it still keeps saying “Connect to VCI”… I tried everything but nothing works…

[@AdrianDragan]

Hello. What car do you have, year?

[@FiscalWoofer]

Is there a reason you did not select 'with limiter' too? Super video - Thank you!

[@AdrianDragan]

Hello. The accelerator pedal does not have the kickdown function, it is required for the limiter. So I chose to activate only cruise control.

[@dlugas251]

@@AdrianDragan Probably that's why mine is just flashing while I set to cruise control. Great video. Thanks.

[@AdrianDragan]

@@dlugas251 Probably

[@robertowiski]

@@dlugas251 Hello! the flashing while you set to cruise control is still happening?

[@dlugas251]

​@@robertowiskiNo. Everything is working fine. Since you told bsm and ecu that this car has cruise control, the flashing on the dash must be related to fault. Check fault codes especially looking for brake pedal switch and clutch switch related faults.

[@kacpers999]

I have issue with cruise. On 308 t7 2009r. On 4 and 5 gear cruise work normalny, but On 6 gear cant define speed or start cruise.

[@AdrianDragan]

Hi. I don't know what is with this problem. Did the car have Cruise Control from the factory or did you install it yourself?

[@kacpers999]

@@AdrianDragan factory Cruise and limiter. On obd aplication not see 6 gear( on display is only for 1 sec 6gear then it shows N)

[@AdrianDragan]

@@kacpers999 Did you diagnose the car with dedicated Peugeot software (Diagbox)?

[@monacocross4241]

falow you video , cruise control show in dispaly but no cant ON when draiving , help ? when draiving 100km/h TRAY ON cruise Control only blinks - - - in display

[@AdrianDragan]

Hello. Try once more to do the activation steps using another Diagbox version. There is also the possibility that the CC option is blocked from the factory.