Adjustable router jig for square holes or recesses

Hello friends
I made a simple router jig.
It can be adjusted according to what you want to fit.
It is also possible to process non-right angle shapes.
Jig plan convenient for woodworking
jisaku-koubou....
[Plan List]
jsk-koubou.sto...
You must also watch this video to use this jig.
• Router Subbase & Cente...

[@jisakukobo]

If you find any unauthorized reproduction of the JSK-koubou video, please report it to me. Thank you. JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。

[@EPSTomcat11]

Excellent DIY jig - Great design 👍

[@Knightmerica]

I don't think I will ever understand why videos like this get downvoted. Personally I prefer dialogue to further explain what is going on but his videos are crystal clear with no language barrier. Another great video.

[@腹我立造]

ＪＳＫさんはアイディアの宝庫で、このジグも他の海外の方々が製作されている物を見てもやはり一番です。作り方がシンプルで加工方法も素人向きで且つスライド調整及び締め付け方法が楽に出来ます。又、繰り返しの加工部分は省いてあります。特に海外の動画の時間は長いのでスキップしながら見ていますがこのＪＳＫさんのyoutubeを見ている方々は理解されて居る方々ばかりだと思います。お迎えが近く成った爺じいですがファンの一人です。どの動画を見てもジグの精度は高く評価しています。本当に素晴らしいです。

[@pf5658]

Some people do more talking than anything. This guy is the total opposite. Absolutely fantastic. Action speaks louder than words.

[@Ben-attas]

louder and clearer 😊👍

[@carterscustomrods]

Your videos always inspire me! I went with Hardboard (HDF) and 2020 t-slot extrusions. It's given me a great deal more adaptability with being able to mount things to the sides, and to screw the hardboard onto the t-slot extrusion, from underneath. I made a 8-way version as well, with a few pieces, and can now do octagons.

[@daikimoto6725]

ありがとうございます。シンプルで最高です。半年前位からRouterを使い始めてまだ初心者なのでこれは大きな助けになります。

[@cyrilnorrie8450]

You always find a way to make jigs and tools completely accurate without a lot of unnecessary frills that waste time and money. You obviously put a lot of thought and experience into every project. Please keep on sharing your projects. Thanks so much!

[@jisakukobo]

Thank you. I am distributing jigs that can be used safely as videos. Please share the video with your friends!

[@AtticusDraco]

I like when creators continually use their own created tools to make stuff Good job

[@cw4608]

Atticus Draco have you checked out Paoson woodworking?

[@AtticusDraco]

@@cw4608 Yes, most certainly have He caught my attention with an adjustable chuck a couple years back :)

[@fernandomorenosr.210]

Seems that I have t rethink my approach to making jigs. Thank you for the inspiration, you have me deepest admirations.

[@AlexanderMoon]

A bottle of Jack as a counterweight! Man, you're a genius! :D

[@urbanstarship]

Thanks for sharing this design. Gotta say mine worked OK, but I really struggled to get a clean recess with it. My Makita router has a big knob sticking out at the base, which meant I had to keep rotating the router to avoid it hitting the rails, and I kept dipping the router into the recess accidentally. It's a wired router, too, so that compounds the problem of trying to rotate it 360˚ in a small rectangle. I also had some issues clamping it down...if one side was too tight the MDF boards wouldn't stay level with each other and I'd get another hiccup when moving between boards. Had a heck of a time getting the right parts in the UK, as well, and I didn't get the exact ones...nothing common fits comfortably in those t-rails; they don't seem to make nuts that fit snuggly and that would have helped (I think they do for the larger t-rails). I'm looking at other jigs for future projects that work better with my router.

[@erosandrei2002]

By far the best DIY channel I ever encounter. Thank you!

[@davidsneddon2242]

Perfection as always JSK-koubou. I’m not sure if you read these comments but. On some of your videos you have a layout parts list with dimensions onscreen, the more recent ones, can you revisit this one and add them please?

[@dreams4163]

I love this channel because besides making incredible tools, the protagonist is always the wood, all very clean and visible. Impressive.

[@txm100]

He IS the wood?

[@mogway791]

Полный восторг! Пошел искать такие направляющие.

[@cw4608]

I love the practicality of the designs and the quite unhurried peacefulness of the videos.

[@guillermovazquez1860]

Me encantan tus proyectos y la limpieza como los haces gracias maestro x tus enseñansas no dejes de seguirnos iluminando con tus videos

[@billynomates4378]

What an easy jig to make and the result is a PERFECT fit. Once again, you sir are the master.

[@PatchworxStudios]

Not that easy. I am making it right now if you dont have the right hardware you need a lot of extra steps.

[@carterscustomrods]

@@PatchworxStudios yeah... like the thing at 5:16 ??? What's it called... I've been looking online for days. I just thought "Slotted bracket" but that put me into a rabbit hole.

[@PatchworxStudios]

Yes i made those Parts myself from some 3mm Aluminim. The Problem is that you need an absolute perfectly concentrical base... i mean absolute. If not this Thing will selfdestruct.

[@carterscustomrods]

@@PatchworxStudios lol I just bought 20 of them on Misumi... I finally found them, and they seem to be the only premade version in existence (I assume @JSK-KOUBOU got them at Misumi as well.) They are called Auxiliary Brackets if I can remember. (My brain is mush after the constant searching.)

[@PatchworxStudios]

@@carterscustomrods xD Nice that you finaly found them. I have seen them on some furniture but its still a non standart piece. I altered the designe to fit my local resources and my scrap bin xD. How are the results? Mine works well enough but like statet above needs a rebuild because i simply could not center the damn routerplate. I first need to rebuild the router circlecuting jig then the baseplate then recut the jig to make it perfect...xD.

[@michaelcherry8952]

Simple, yet ingenious! It is so enjoyable watching these useful tools being created. Thank you so much!

[@КуЛиБин-п9р]

Это лучшее приспособление этого рода из того,что я видел на KZbin. Автору 5+++ ! Особенно учитывая его себестоимость по сравнению с Festool(около 300$) !

[@timblackwood1531]

Excellent I thort of this In my mind last year but didn't act on it. Your jig is brilliant 👏👏👏👌👌👌👍

[@loboazul3735]

DE LO MEJOR Y SENCILLO QUE HE VISTO GRACIAS POR COMPARTIR TUS CONOCIMIENTOS HERES UN AUTÉNTICO MAESTRO ME DA GUSTO VER Y ADMIRAR TU MAESTRIA

[@patrickguyot1290]

I love everything you make JSK-koubou,thank you

[@igord7019]

The best homemade rectangular hole milling tool I 've seen!

[@bobbgrygor5964]

Я в восторге от фантазий этого мастера! Смотрю все его видео. Он просто мастер с большой буквы! Очень щипитильный, очень качественно все делает.👍

[@johnbarlow6546]

Another simple idea well executed. What do you call the metal brackets that connect the t- track ? Thankyou

[@rafaelbezerra8048]

Did anyone find it out?

[@enricozucca2813]

@@rafaelbezerra8048 I'm looking for them but nothing...have you found them?

[@paulk3573]

@@rafaelbezerra8048 you find the item at aliexpress: universal right angle connector for furniture bracket

[@paulk3573]

@@enricozucca2813 you find the item at aliexpress: universal right angle connector for furniture bracket

[@ronaldoliver1700]

Fantastic Videos! Learn something new for each one I view. Very useful products. Thank you.

[@wolfgang4468]

Watching you work is ZEN.

[@spicyhot1695]

You have a lot of great ideas. I love your videos. Thanks for sharing

[@grzegorzwegorz353]

Its way better than the others diy routing templates because you actually see the shape. Simply genius !

[@alpaca6766]

Handy little unit. You will always have to use the same size router bit which would be annoying if you have a lot to take out.

[@ВикторЛысенко-в1ж]

Шаблон festool курит в сторонке. Просто и гениально! Спасибо!

[@euvitmultiserviciosevgenyp7019]

Шикарно! Только где взять профиль?

[@хтось_04]

Не понял, зачем такие длинные соединительные планки, выступающие на 5 см. Видимо, какие-то стандартные. Профиль вчера купил, вот эти планки как делать?

[@amideppir1935]

@@хтось_04 С 10-той минуты становиться понятно зачем. Формат "карманов" в принципе не ограничен. Я так понимаю, что при достаточной "нужности" можно добавить и больше направляющих для создания многоугольников.

[@masterace6416]

Там они не нужны. Присмотритесь: достаточно соединительной пластины с тремя отверстиями.

[@MultiTom1956]

Brilliant !!!simple jig and like the way you have demonstrated the making of this 👌thank you

[@brent1525]

The most simple, straightforward and effective adjustable jig I've seen, many thanks!

[@НиколайБодин-д5д]

Просто и Гениально!!! Снимаю шляпу!!!!!

[@SilvioRSantosP13]

Parabéns pelo belo trabalho. E gostei da garrafa de Whisky como contra peso. Sou de Salvador/Bahia-Brasil e fã do canal. Congratulations for the beautiful work. And I liked the bottle of whiskey as a counterweight. I am from Salvador / Bahia-Brazil and a fan of the channel.

[@carlosimolina]

Great video and perfect build! One question: for the cut to be precise, you have to use always the same bit? Thank you for sharing!

[@jamesharris6062]

A picture paint a thousand words great job

[@cmue2508]

But anyway I like to express my highest compliments for your plans and projects, Well done!!

[@keirfarnum6811]

Yet another simple but smart jig. I have some extra t-track that I may see if I can use to make one of these. Nice idea. 👍🏻

[@lekaprburaak]

Absolutely briliant! I need this level of preciseness. Many thanks from Czech Republic.

[@MrMatthewBallou]

This is some epic unintentional ASMR... A++

[@FranksDIY]

I made one from wood a couple years back on my channel buit I love yours better. Wow need to make one too now.

[@henryrossouw930]

Brilliant.The best one on YT by far.Thanks for sharing.

[@jamesmaguire6888]

This is the best adjustable square recess jig I've ever seen, just wish I could get the plan and know where to get the slide brackets.

[@elinaim2394]

You have amazing videos

[@markwhisler3501]

I like the counterweight on your vertical track saw.

[@phototrb]

Ingenious...greetings from India.

[@pch4287]

Vey clever idea.Nice work .Congratulations

[@АлександрЗаренбин]

Просто и легко. Браво автору

[@kustehnik]

I like what you do ❤️

[@bowlchamps37]

I have such a jig for at least 30 years. And this is the first time in 10 years I see it on youtube

[@Manuel_E.]

I have seen it a lot on KZbin, but this is the thinnest one

[@田中浩一-x7k]

アイディアもさることながら、仕上げの良さと見栄えの良いのにはいつも感心させられます。ところでよく使われている電動ドリルのスタンドが欲しいのですが、氏素性を教えてください。（自作なのか購入品なのか）宜しくお願いします。

[@helmut666kohl]

Extra like for the "Jack bottle counterweight"!

[@Micro-Moo]

Nice, very nice, so accurate milling! But... doesn't your bit burn the wood?

[@kunjavideo]

Great idea and execution... can you tell me what the little slotted section at the end is called?

[@piersrobinette4438]

I'm also struggling to find the "little slotted section" bits. Has anyone got a name for them please?

[@electronic7979]

Good idea 👍

[@thomassasalar3869]

Great video . Where can I get the connection parts ( links ) that connect the t track .Thank you

[@alessandrorusso1714]

AliExpress:Connettore per mobili con supporto in laminato personalizzato connettore universale ad angolo retto in ferro nichelato ad angolo retto a forma di L

[@salvatorebuonpane9475]

Complimenti sei sempre in gamba . Super

[@jerbear197]

Ok. Great video but I have a question..you've made this jig with a particular router bit you have chosen. But surely if you use a bigger/wider router bit your jig will need to be adapted or indeed a new one made. Distance from track to router bit will change depending on bit used...or am I missing something...

[@travnicek]

You did sort of miss something. You don't have to change the jig whatsoever. That's adjustable. Just the template which takes less than a minute to cut (the little square cutout he used at the start in the demo) He just has to account for the change in offset from cutter to bushing and done.

[@skipperbentdk]

Very creative and great idea. Nice job and thanks for sharing!

[@fabricem2744]

Impressive !!! Thank you for sharing.

[@frosiaburlakova7732]

Perfect! I am going to build this! Thank you! Your designs are always simple and elegant.

[@AlphaTroniks]

Anyone noticed that the hands don't look like a man's? If it's a lady behind this , big huge salute from me to you for your wonderful work ma'am! If it's a man still a big salute!

[@cw4608]

He is a Japanese man. Generally, people of Asian descent have finer bone structure than those of European descent. Also interesting - Japan’s average IQ is 9 points higher than ours in the US.

[@三浦貢-h3l]

あなたの動画は大変参考になりました。ありがとうございます‼️

[@boudig]

Toujours autant de plaisir a vous regarder faire Vidéo de grande qualité Je pense que je vais faire ce gabarit Merci d'avoir partagé ce moment 👍👍🏽 Juste une question ou peut on se procurer les pattes de liaison que vous utiliser dans la vidéo ?

[@adelker4884]

@Boudig That is the million-dollar question. JSK, please provide links to where we can buy the metal parts/ connectors (the hardware) --- or even just the names of the parts. Merci beaucoup, thanks a million .

[@garrysmythe]

A brilliant build, so useful, thanks for posting from Garry in the UK

[@Xerumorph]

I love it. ✌😁 Hey you can put a tape measure on the sides. If you need a 4 by 4 cm plate, you can adjust it exactly. 📏

[@MCsCreations]

Really fantastic idea, dude! Beautiful job! 😃

[@jorgefarias8057]

Perfect your job! Congratulations! I will try to reproduce something on a smaller scale for use with Dremel with the 335 accessory! Thanks for the amazing DIY videos on your channel!

[@marcvandenbroeckDaKawa]

Super man. Just what I was looking for. I'll make this over the weekend

[@carloskulicheski2831]

Very good jig, simple and accurate! Congratulations, good job!

[@JoseSilveira-newhandleforYT]

Clever, simple and effective! Loved it!

[@vision6D]

Excellent well done.

[@Painless61]

Very useful and easy to build... thx for sharing 👍🏽

[@DK8312]

Brilliant job!

[@martincain1128]

Superb, simple but so accurate and usable, well done and thanx

[@terencedavis7596]

thank you great idea will make and use for inserts and drawer rail

[@kendaubney6746]

very simple to use, just like to know where you got your fittings.Great to see a tradesman at work well done have already started making mine and looking at more of your projects thank you for sharing

[@владимирчернов-п3м]

РЕАЛЬНАЯ ВЕЩЬ,ПРОСТО ГЕНИАЛЬНО! ЛАЙК

[@debuti]

Nice! It would be even better if you add a ruler to the inside of every guide, with the 0 matching the corner. That way is really fast to check squareness

[@jacksawyer3626]

Excellent! Do you have a parts list?

[@armandepifarre9636]

je ne trouve pas les pattes plates qui vous serve à assembler les 4 rails en T pour faire le gabarit pour défonceuse ???

[@armandepifarre9636]

Pas de réponse?ces pattes sont introuvables

[@martinwho3560]

@@armandepifarre9636 see my comment from one month ago

[@dswoods124]

Genius . good job

[@JuanGarcia-1125]

Nice work MASTER, thanks.

[@Aprendiz-de-Marceneiro]

Absolutely brilliant

[@MrPierref4]

Ingenious design. But what do you call those extensions into which you fit the screws?

[@fabiodeppieri68]

Nice job congratulations! where can I buy the 4 slotted plates for the correct fixing of the profiles?

[@9700am]

fabio deppieri Thats what I would like to know as well.

[@byvoldnnikkei5929]

I like this channel......👍👍👍

[@angel1138thx]

more simple and effective impossible, thanks you so much

[@DongusKong]

What are the metal bits you used to connect them called?

[@kaliavarad]

Amazingly simple design, very well made. What is the bracket called that you are using to connect? I have gone crazy trying to find them. thanks

[@jerbear197]

He made it in an earlier video..

[@lucapettinelli300]

Congratulations, wonderful project. I have a question: it looks like you're not using a copy ring and from the video i can't understand if you're using a very short bit with ball bearing, so how do you mill the wood beneath the jig without milling the jig too?

[@ryderscustomcreations3665]

He used the router to cut the jig when running along the aluminum. So the aluminum guides keep the bit exactly at that same edge it already cut...

[@garcia678]

Gracias por el aporte y vídeo, excelente trabajo.....

[@хтось_04]

Excellent! I did not understand the purpose of the connecting strips 10 cm with grooves. Size adjustment is done by moving the slider in the profile, and why the protruding part of the strap with a groove?

[@royprawira]

You don't have to, feel free to modify it if you think you have another way. I guess, he did that just for convenience because is easier and faster when release the jig because a larger room to slide the bolt.

[@хтось_04]

@@royprawira Thanks! I realized he had the standard. I had to order.

[@adelker4884]

Wooooow! Great jig and, as always, superb instruction and video production 👍👍👍👍

[@pdstokes8]

Wow, simple but great. Well done.

[@delasjean-louis3529]

Hello, I just discovered your KZbin channel and viewed some of your videos. I admire your ingenuity and the quality of your achievements. I have a question: do you attach the internet links for the finished products you use (eg for the following video:) and where can we find these links? With thanks

[@1briankb]

Hi, really like your video and would like to build one for myself. Which T-Tracks and connectors did you use?

[@jucava00]

Simple and smart, good job, keep the videos comming